Can't Create New Publication

Oct 11, 2007

When go to set up a new publication I get the below error:


TITLE: New Publication Wizard
------------------------------

SQL Server is unable to connect to server 'LEICS-DC1'.

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2050.00&EvtSrc=Microsoft.SqlServer.Management.UI.PubWizardErrorSR&EvtID=CantConnect&LinkId=20476

------------------------------
ADDITIONAL INFORMATION:

SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, ''. (Replication.Utilities)

------------------------------
BUTTONS:

OK
------------------------------

I am specfing the server name but it still brings back the same error, the message at the bottom also stats to try and connect to '' which of course is impossible.
This is a domain controller if that makes any difference, SQL 2005 SP2, Win 2003 STD.

Thanks

View 3 Replies


ADVERTISEMENT

Can Not Able To Create Publication

Feb 28, 2008

Hi guys.



i had configured a merge replication betwen 2 server and i was running fine. but due to network problems my network admin has changed the ip address and name of the publisher, distributor and subscriber.



what i did. i just drop the publication and now i m trying to create a new one. but i cannt' able to create. i dont' know y.. this is the error i m facing..



Msg 208, Level 16, State 1, Procedure sp_addmergepublication, Line 239

Invalid object name 'dbo.sysmergepublications'.

Msg 21040, Level 11, State 1, Procedure sp_MSaddmergepub_snapshot, Line 65

Publication 'DIS_MASTER_Merge' does not exist.

Msg 20026, Level 16, State 1, Procedure sp_grant_publication_access, Line 176

The publication 'DIS_MASTER_Merge' does not exist.

Msg 20026, Level 16, State 1, Procedure sp_grant_publication_access, Line 176

The publication 'DIS_MASTER_Merge' does not exist.

Msg 20026, Level 16, State 1, Procedure sp_grant_publication_access, Line 176

The publication 'DIS_MASTER_Merge' does not exist.

Msg 20026, Level 16, State 1, Procedure sp_grant_publication_access, Line 176

The publication 'DIS_MASTER_Merge' does not exist.

Msg 20026, Level 16, State 1, Procedure sp_grant_publication_access, Line 176

The publication 'DIS_MASTER_Merge' does not exist.

Msg 208, Level 16, State 1, Procedure sp_changemergepublication, Line 205

Invalid object name 'dbo.sysmergepublications'.

View 1 Replies View Related

Cannot Create Publication After SP1 Upgrade

May 24, 2006

After upgrading SQL Server 2005 with the recent service pack, I am unable to create a publication. When I right-click on [INSTANCE]/Replication/Local Publications and select "New Publication...," the mouse cursor turns into an hourglass, but the wizard never shows up, nor is any error displayed.

There is a logged error that's been showing up that may or may not be related. The error message is "Replication-(null): agent (null) scheduled for retry. Could not clean up the distribution history tables."

Any ideas on how we can restore replication functionality on our SQL Server instance?

View 6 Replies View Related

Error 14294 - Can't Create Publication

Jul 1, 2003

When running the create publication wizard, I get:

"Error 14294 - Supply either @Job_id or @Job_Name to identify the job"

I had pubs & subs set up, but things were erroring, so I tried deleting everything and wanted to start from scratch, but the last step in the wizard gets me stuck.

Is it ok to clear the tables in the Distribution database that have info from earlier attempts at setting things up ?

Is there a way to delete the distribution database & really start from scratch ?

View 2 Replies View Related

Replication - Can Not Create Publication Database

Jul 23, 2005

Hi,I am trying to use Enterprise Manager Wizard to create a newPublication database but I got the following message.Error 2812: Could not find stored procedureMyDB.dbo.sp_MSadd_logreader_agentThere seems that some replication stored procedures.Any help?Thanks in Advance

View 1 Replies View Related

Create A Publication In SQL Server 2005 Express

Nov 20, 2006

Hi,

is it possible to create a publication with SQL Server 2005 Express. I canīt seem to find it in Microsoft SQL Server Management Studio Express.

Do i have to install the full version? :(
Isnīt there any other option?

Thanks
SP

View 4 Replies View Related

Upgrade From 2000 &&> 2005 - Cannot Create Publication

Mar 30, 2007

have upgraded to SQL Server 2005 from 2000 ( to 9.0.1399).



The database seems to be functioning in order, however - I am unable to crerate a publication in order to replciate the database.



I am using the New Publication Wizard and see the follwoing error:



TITLE: New Publication Wizard
------------------------------

New Publication Wizard encountered one or more errors while retrieving the list of articles on 'nld_tradeinvoicing'. The list of articles may not be complete.

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.PubWizardErrorSR&EvtID=CantInitArticleList&LinkId=20476

------------------------------
ADDITIONAL INFORMATION:

An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)

------------------------------

Invalid column name 'options'. (Microsoft SQL Server, Error: 207)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=207&LinkId=20476

------------------------------
BUTTONS:

OK
------------------------------



Could anyone help to pinpoint the casual factor behind this?

View 3 Replies View Related

Unable To Re-create Snapshot Of Existing Publication Due To Missing Publisher's Identity Range Allocation Entry

Jul 21, 2006

I re-created a publication that was having problems and it gives this error when I start the snapshot agent from SQL Server Management Studio:  I am stuck on how to resolve - any ideas?

"The publisher's identity range allocation entry could not be found in MSmerge_identity_range table.  Transaction count after EXECUTE indicates that a commit or ROLLBACK TRANSACTION statement is missing.  Previous Count = 1, current count = 2."

select * from MSmerge_identity_range returns 19 entries but I don't know how to fix. 

I have tried deleting and re-creating but always get this error.

My other publications and subscriptions are working fine and I was able to create a new test publication that worked but can not get this one to work that worked fine up until today. 

 Any ideas?

 

View 2 Replies View Related

Can Not Delet A Publication In SQL Server 2005: The Publication Does Not Exist [SQL Server Error: 20026]

Sep 21, 2007

Hi, everyone,
I am new in SQL server 2005. I had setup SQL server 2005 P2P replication. Somehow it did not work one of two way replication. I tried to delete the publication. However I could not do it. have the same problem. When I tried to delete the publication, I got the publication " " does not exist.[SQL server error: 20026]. I tried to use sp_droppublication, it gave me error "the database is not enabled for publication". Nevertheless, I can see the publication in MS SQL Management Studio and Publication monitor with OK status. I could not find the distribution database either.

Could you anyone has ideas to delete this publication? I am sorry I am not a programmer. Please give me more detail explanation if you can. Thanks.

View 6 Replies View Related

Publication

Jun 20, 2006

I have a publication on my SQL Server.

The first time my application syncs with the server it works fine.

If I try to sync again I get "Permission Denied Number 80040E09 NativeErr: 0"

Other publications work fine, it just seems to be this one.

Any ideas?

View 5 Replies View Related

Cannot Add Publication

Oct 30, 2006

Hi!

I have a strange error, when I try to create publication

Msg 3933, Level 16, State 1, Procedure sp_MSrepl_addpublication, Line 1222
Cannot promote the transaction to a distributed transaction because there is an active save point in this transaction.

What is it?

P. S. The error arise with all types of replication.

View 6 Replies View Related

Modify Publication In SQL 7.0 . Please Help !!

May 14, 2002

Hello ,

I have a problem with a publication which is a transactional replication on SQL Server 7.0 .
I want to add stored procedure to the existing publication along with the tables . But the Enterprise manager does not allow to select or check the box
against the required stored procedure although it displays when i right click on the publication and select proeprties .

Can i have some help in this regard ? Does anybody knows to add a stored procedure by means of a query .

Is there any other way to modify publication in SQL Server 7.0 although it is possible in SQL Server 2000 .?

Many thanks in advance.
Sandra .

View 1 Replies View Related

Is DB Publication/subscription?

Jul 26, 2004

Because of problems trying to alter databases used
for replication my software would need to find out
if a database is a publisher or was repliated (using
T-SQL). Is this possible?

View 1 Replies View Related

How To Add New Article To Publication?

Dec 23, 2004

Hi,
I'm use MSSQL2000 SP3 with replication.
I want to know that Can i add new article to existing publication by
Enterprice Manager ?

someone told me that we can do that in older version but not now,right? :confused:

View 1 Replies View Related

Unable To Add New Publication

Jun 2, 2006

I have been wrestling with this one all day and cannot find anything on MSDN, google, etc.... I have configured replication, but cannot create a new publication either programmatically or using the wizard.
I programmatically did the following:
1. I set up my local server as a distributor, and created a distribution database (@distributor set to server sysname)
execute sp_adddistributor @distributor = @distributor
execute sp_adddistributiondb @database = @distributionDB, @security_mode=1;
2. I registered my local server also as a Publisher (@publisher set to server sysname, @distribution = 'distributor')
SELECT @sql = 'sp_adddistpublisher @publisher = ''' + @publisher +
''', @distribution_db = ''' + @distributionDB +
''', @working_directory = ''' + @directory + ''', @security_mode = 1'
SELECT @sp_executesql = quotename(@distributionDB) + '..sp_executesql '
EXEC @sp_executesql @sql
3. I enabled my local database for transactional replication (@replicationDB)
exec sp_replicationdboption
@dbname = @replicationDB,
@optname = 'publish', @value = 'true
4. I added a logReaderAgent on the ReplicationDB
SELECT @sql = 'sp_addlogreader_agent @publisher_security_mode = 1'
SELECT @sp_executesql = quotename(@replicationDB) + '..sp_executesql
EXEC @sp_executesql @sql

All is well up to this point, no problems, all looks great. When I check the status of things using sp_help repl stored procedures to check on publisher, distributor all looks healthy. Also looks good when I use the SSMS replication interface to check on distributor, publisher, etc. . HOWEVER...... I cannot create any publications.

I tried programmatically, and also by using the wizard.
I keep getting the same error :'Cannot insert the value NULL into column 'pubid', table'.
This is the sql I try to run:
EXEC sp_addpublication
@publication = 'test3333',
@status = N'active',
@allow_push = N'true',
@allow_pull = N'true'
This is the error:
Msg 515, Level 16, State 2, Procedure sp_MSrepl_addpublication, Line 1320
Cannot insert the value NULL into column 'pubid', table 'CypressMaster.dbo.IHpublications'; column does not allow nulls. INSERT fails.
The statement has been terminated.
Msg 14018, Level 16, State 1, Procedure sp_MSrepl_addpublication, Line 1348
Could not create the publication.
If I use the wizard instead of trying to create the publication programmatically, I get this error (just about the same content, but a little different wording):
Creating Publication
- Creating Publication 'NewPublication' (Error)
Messages
* SQL Server could not create publication 'NewPublication'. (New Publication Wizard)

------------------------------
ADDITIONAL INFORMATION:

An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)

------------------------------

Cannot insert the value NULL into column 'pubid', table 'CypressMaster.dbo.IHpublications'; column does not allow nulls. INSERT fails.

Could not create the publication.
Object 'NewPublication' does not exist or is not a valid object for this operation.
Changed database context to 'CypressMaster'.
The statement has been terminated. (Microsoft SQL Server, Error: 515)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=515&LinkId=20476



- Adding articles (Stopped)

- Starting the Snapshot Agent (Stopped)

- Generating a script file (Stopped)

View 4 Replies View Related

Creating A Publication

May 22, 2006

hi
I was following the walkthrough "Creating a Mobile Application with SQL Server Mobile" and when I got to the point where you create a "local publication" I couldn't find the link "Local Publication" in my Object Explorer.

I read all the help in books online however id did not tell me how to bring that link there.

I did install the replication component using the CD installation. I have SQL Server 2005 Standard Edition and Visual Studio 2005


I also found the help "Using the Publication Wizard to Create a Publication" but did not know where to locate or start the wizard.

any help will be appreciated.

View 4 Replies View Related

Creating A Publication

Aug 21, 2007

Hi,
I've come across this one before in one of the threads, unfortunately for me the author managed to figure it out for his/her self and there for no answer was posted, so can anybody help PLEASE???

Creating Publication

- Creating Publication 'SQLMobile' (Error)
Messages
* SQL Server could not create publication 'SQLMobile'. (New Publication Wizard)

------------------------------
ADDITIONAL INFORMATION:

An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)

------------------------------

Invalid object name 'dbo.sysmergepublications'.
Publication 'SQLMobile' does not exist.
Changed database context to 'SQLMobile'. (Microsoft SQL Server, Error: 208)


Its been created via UI
on SQL2005
the distributor is correctly installed
i also have not tried creating a publication on any other database.....this is the first.

Any Ideas?

View 1 Replies View Related

Modifying Publication In SQL 7.0- Urgent Help .

Jul 31, 2002

Hello ,

I want to drop a table from a publication , so that i can copy some data from another server . After the copy , i want to add the article or the table back again to the publication without making any changes to the subscribers configuration .

Is it really possible on SQL 7.0 ? Right now it does not allow me to copy the data to the published table or even drop the article (table) and it says that the article is published for replication and cannot be dropped or modified .
The table is configured for transactional replication .

I will have to drop the entire publication and create all the subcribers again .

Any help in this regard please .
Sameer

View 2 Replies View Related

Publication Cannot Drop Table.

Nov 13, 2000

We have a publication from database a to database b. Database a containts table1 to be published to databasae b. Database b contains a publication of table1 to database c. When we go to rerun the publication from database a it errors saying cannot drop table1 since it is part of database b's publication. how do you do this.

Thanks in Advance,
Phillip M. Triocli

View 1 Replies View Related

Merge Publication Error

Mar 7, 2001

Hi,
I disabled a merge publication on my server. I then ran sp_removedbreplication to clean the system tables. Thats fine. When I recreate a new publication on my server now, I still get the red x on my publisher node in my replcation monitor from the error I was getting before. Evenm though this publication is error free. Is it saving an srror flag in one of the sytem tabbles

Any ideas on this?
Thanks

View 1 Replies View Related

Disabling Publication Using SQL DMO. URGENT!!!!!!!!

Oct 29, 1999

Hi,
I'm using DMO (SQLOLE65.dll) to programmatically replicate selected publications. The Publication object supports a property called Enabled, which can be set to FALSE. I'm setting the enabled property to TRUE for those publications that need be replicated, and make the others FALSE. Still, all publications get replicated. [I give DoAlter to commit the changes i made.]
Any solution,Please mail me ASAP to venkateswaranb@synectics.soft.net

Thanks,
Venkat

View 2 Replies View Related

Msg 14013, Not Enabled For Publication.....

Apr 25, 2007

Hi,
I tried to run the following script from SQL2005 server A (publisher) from Database 'TestDB' to SQL2005 server B
(subscriber) database 'TestDB'
-------------------------------------------
exec sp_addsubscription @publication = N'publish_TestDB_FromCA', @subscriber = N'subscriberTest', @destination_db = N'TestDB', @subscription_type = N'Push', @sync_type = N'automatic', @article = N'all',
@update_mode = N'read only', @subscriber_type = 0

with following error:

Msg 14013, Level 16, State 1, Procedure sp_MSrepl_addsubscription, Line 252
This database is not enabled for publication.

Any idea?
Thanks
David

View 14 Replies View Related

How To Add A Table To An Existing Publication?

Feb 22, 2002

Hi,
I would like to know the procedure to be followed to add a table to the existing publication. The subcriber doesn't have the object yet. I have data in the source table and I want to add this table in a existing publication for transactional replication. Any advise is appreciated.

Thanks,
Ravi

View 1 Replies View Related

How To Reboot A Publication Server ?

Jul 16, 2004

We have to add some hardware and I was wondering if someone could provide a stepwise tip to do it .

It is a 3 Server Environment Pub/Dist/Sub
All three running under SQL2K
Here is what I am planning.

a. Uncheck the Enable in Distributed Agent for each replication
b. Wait for all replications to complete
c. Shut down Publisher ? Or do I have to do something else before that.

Please explain a little .

Thanks

View 2 Replies View Related

Deleting Publication With No Agents Available

Mar 6, 2007

I have a case of SQL Server 2005 production db's publication which does not have either Log reader, snapshot or distribution agents.
I need to modify primary key in one of the tables, and existing publication does not allow this.
When I try to start snapshot job in GUI I am getting of course error:
"Could not find the regular snapshot job for the spicified publication. Supply either @job_id or @job_name to identify the job, error 20678."

Is there any way to erase it with system st procs or SQL?
Help is greatly appreciated.

View 3 Replies View Related

Problem Deleting Publication

May 1, 2006

Hi All,I have a problem, a user deleted some tables from a couple db's dealingwith replication. I now get this error on those db's.The process could not execute 'sp_repldone/sp_replcounters onservernameI have deleted one of the database's and neither are listed underpublications but they still show up under replication monitor.Any ideas on how to delete them would be great. When I try I getError 208: Invalid object name 'sysarticles'Invalid object name 'sysschemaarticles'Could not use view or function 'sysextendedarticlesview' because ofbinding errors.TIADave

View 1 Replies View Related

Error: The Publication Does Not Exist

Oct 31, 2006

I had a publication that I removed from the Local Publications folder but it still shows up in Replication Monitor (with a red 'X'). No jobs exist related to this publication either.

Everything is working ok, but I can't get rid of this from the Replication monitor.

Any help would be appreciated.

Thanks.

View 9 Replies View Related

Multiple Publication On The Same Database

Oct 3, 2006

Hello,

I want to create one more publication on a database (SQL Server 2005) that is already a publisher and has subscribers. The subscribers of the second publication will not be inserting new records so I will mark the articles (tables) as download-only.

Is there anything extra that I should take into consideration? Are there any side effects of this process?

Thanks in advance.

SilentOceaner.





View 3 Replies View Related

What If I Attempt To Creat A Publication While...

Apr 29, 2007

What if I attempt to creat a (merge) publication while the production sql server is online and active?



From another point of view, is there any drawback if I try to create (merge) publication while the tables are being used by users?





Thanks

Ekrem Önsoy

View 5 Replies View Related

Creating Publication Through C#.net Code

Oct 24, 2007

I am using sql 2005 replication in my application. Anybody knows how to create publication through code??please help me...

View 1 Replies View Related

Parameterized Filters On Publication???

Oct 20, 2006

Does anyone know if you can use any other parameters in the row filters for merge replication besides the functions SUSER_NAME() and HOST_NAME()?

I would like to create a publication for a couple thousand mobile databases to replicate with one SQL Database but filter what data they get based on some parameters. Do I have to hard code WHERE statements into static filters and create a publication for every user (seems a little ridiculous)?

Is there a proper way to do this using the SUSER_NAME and give each user a different connection name that will filter data properly?

Thanks,

Patrick Kafka

View 3 Replies View Related

Publisher Become Subcriber To Other Publication.

Mar 23, 2006

Hi,

I just want to know, is it possible to do this ?

If yes, how to do it ?

Thanks.

View 5 Replies View Related

Problems With A Table In A Publication

Aug 19, 2006

I have a database with two publications, one for SQL CE Clients with filters that send each client its data and keeps it database with "low weight" filtering data not older than a week, and the other publications for SQL Servers.
The publication for SQL CE Clients works excelent, the other one has this problem:

In the publisher i can insert data that should be replicated to subscribers, but subscribers don't receive it. And if I try to insert both in the publisher and the subscriber, the subscriber throws a Primari Key exception.
In the other way, if i insert the data in the subscriber, when it synchronizes, the publisher pulls this data to the table and keeps it, but deletes the subscriber table due to a "conflict". And it never sends the data back to the subscriber, keeping the subscriber's table always clear.

Any Idea?

Thank you.

Omar.Rojas

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved