Can We Have Temporary Table In Store Procedure When Using BCP ?
Jul 21, 2006
hi, good day,
when i run query in query analyzer
exec sp_test '2006-07-21'
it show result , however when i run it using BCP tools
exec master..xp_cmdshell 'bcp "exec sp_test '2006-07-21' " queryout c: est.txt -c '
it give me error which is something like "invalid object #temp_tbl",
i do using temporary table in store procedure
how to we solve it ? seem that bcp not support temporary table ? really need guidance from expert here ,
thank you :eek:
View 14 Replies
ADVERTISEMENT
Aug 29, 2007
which is more efficient...which takes less memory...how is the memory allocation done for both the types.
View 1 Replies
View Related
Mar 21, 2006
I'm trying to insert the results of a stored procedure call into a temporary table, which is not working. It does work if I use a non-temporary table. Can anyone tell me if this is supported or what I am doing wrong.
Here is an example:
-- DROP PROCEDURE testProc
CREATE PROCEDURE testProc AS
BEGIN
SELECT '1111' as col1, '2222' as col2
END
-- this call will fail with message Invalid object name '#tmpTable'.
INSERT INTO #tmpTable EXEC testProc
--- DROP TABLE testTable
CREATE TABLE testTable (col1 varchar(5), col2 varchar(5))
-- this call will succeed
INSERT INTO testTable EXEC testProc
View 5 Replies
View Related
Feb 20, 2008
I have a stored procedure with the following:
CREATE TABLE #t1 (... ...);
WITH temp AS (....)
INSERT INTO #t1
SELECT .... FROM temp LEFT OUTER JOIN anothertable ON ...
This stored procedure works fine in Management Studio.
I then use this stored procedure in an ASP.NET page via a SQLDataSource object. The ASP.NET code compiles without error, but the result returned is empty (my bounded GridView object has zero rows). From Web Developer, if I try to Refresh Schema on the SQLDATASource object, I get an error: "Invalid object name '#t1'. The error is at the red #1 as I tried putting something else at that location to confirm it.
What does the error message mean and what have I done wrong?
Thanks.
View 5 Replies
View Related
Mar 5, 2007
Hi
I am new to SQL programming. This is what I am trying to do in store procedure.
Alter a table - adding two columns.
Then update those columns
Both the above action in same procedure .
When I execute them - it complains that the columns I am adding in the first part of store procedure , does not exists.
So the SP looks like this
create store procedure <name> as
alter table <name> ADD
column_1 nvarchar (256),
column_2 nvarchar (256);
update table
set
column_1 = <condition>
column_2 = <condition>
The SQL complains -
invalid column name column_1
invalid column name column_2
Can some one help please...
View 3 Replies
View Related
Sep 20, 2006
I have a sp that will do two select from two table. now, can datareader read both table or only dataset can? if datareader can? how to handle it?
View 1 Replies
View Related
Oct 22, 2007
HI
I have a problem related Store Procedure, that i am trying to extact a value from Database (Like FirstName,LastName,Email Address) through Store Procedure and Display it in the DropDownList(Like: FirstName LastName ,(xyz@xyz.com)) , and this is working correctly.
Now i try to check the value at the same time if it is NULL value in the Database then pass EmptyString to the DropDownList Like ("" "" ,(xyz@xyz.com))
how i can do that in the store procedure.
Comments will be appreciated.
View 3 Replies
View Related
Feb 22, 2001
Does anyone know how to save the output of a stored procedure into a table? I would like to be able to use some procedures such as the sp_helpfile and dbcc sqlperf(logspace) and save to output into a table. Does anyone have any ideas?
View 2 Replies
View Related
Jun 30, 2004
Hi people.
I need some help to export a table to Microsoft Access using a Store Procedure.
My Store Procedure will pupolate a temporary table with some information. After that I want that the store procedure export this table to Access.
Is there any script or command that can do it? And how can i use it into a Store Procedure?
Please, if possible give a example.
thanks in advance
:confused:
View 3 Replies
View Related
Jul 31, 2014
While writing store procedure in db most of Time i will Use common Table to write select queries for selecting more than seven table whether it reduce speed performance or it won't
;with cte
{
}
View 2 Replies
View Related
Dec 17, 2013
I have following hash table in C#.
Rank Slug
1 ABC
2 XYZ
3 PQR
I want to pass hash table or data table to the store procedure and use the looping inside the store procedure.
View 2 Replies
View Related
Mar 26, 2015
I have a INSERT INTO where i retunr the result from a store procedure. But I want to only insert the data if the row not already exist. How can i do that? (See Where xxxxxxxxxxxx).
I can't use a function as i store data in a temporary table in the store procedure.
--Get Generated Times
INSERT INTO @GeneratedTimes(
ResourceId ,
DateFrom ,
DateTo )
EXEC dbo.P_GenerateTimes @ApplicationId , @EventId , @FromDate , @ToDate , @WeekScheduleId , @FromTimeToBook , @ToTimeToBook
WHERE xxxxxxxxxxxxxxxxxx
View 1 Replies
View Related
Oct 1, 2007
now i want to learn how to make a stored procedure to insert a record to `purchase` table, and many records to `purchase_detail` table with transaction where the some value are passed from vb6 through the parameters. i've made a SP to insert 1 record to `purchase` table n 1 record to `purchase_detail` just for testing, so i set the disc value to 10. it works fine... --------------------------------------------------------------------------------- CREATE PROCEDURE `usp_save_purchase`(xpurch_id VARCHAR(10), xpurch_date VARCHAR(10), xsupp_id VARCHAR(10), xitem_id VARCHAR(10), xqty TINYINT(3), xprice DOUBLE(15,2)) BEGIN START TRANSACTION; INSERT INTO purchase(purch_id,purch_date,supplier_id) VALUES(xpurch_id, xpurch_date, xsupplier_id); INSERT INTO purchase_detail(purch_id,item_id,qty,price,disc) VALUES(xpurch_id, xitem_id, xqty, xprice, 10); COMMIT; END --------------------------------------------------------------------------------- what i need is something like that but i only pass 3 variables (purch_id, purch_date, and supp_id) to SP, and then the SP will insert 1 record of purchase to `purchase` table, and add the purchase items to `purchase_detail` automatically from `purch_temp` table, and use the disc rate based on `supplier_id` and `item_id` from supplier_disc table, which will be looked something like this: --------------------------------------------------------------------------------- CREATE PROCEDURE `usp_save_purchase`(xpurch_id VARCHAR(10), xpurch_date VARCHAR(10), xsupp_id VARCHAR(10)) BEGIN START TRANSACTION; INSERT INTO purchase(purch_id,purch_date,supplier_id) VALUES(xpurch_id, xpurch_date, xsupplier_id); /*start looping here get the disc rate for each items where supp_id = xsupplier_id and item_id = the item_id from purch_temp table, and save it in a local variable (let's say local_disc) INSERT INTO purchase_detail(purch_id,item_id,qty,price,disc) VALUES(xpurch_id, xitem_id, xqty, xprice, local_disc); */ COMMIT; END --------------------------------------------------------------------------------- can anyone help me please? thank you in advance...
View 1 Replies
View Related
Feb 17, 2014
I am looking for an example of a store procedure that will run a existing view and copy the results to a table. Every time it runs the table needs to be truncated. Will run once a day.
My view is a follows
SELECT PClass
FROM mydatabase.dbo.ProductClassDes
WHERE (ProductClass <> '_RBS') AND (ProductClass <> '_EDT') AND (ProductClass <> '_BMS') AND (ProductClass <> '_PAZ') AND (ProductClass <> '_PBC')
View results need to be copied to a table tblCurrentProductClasses that will only contain one field PClass.
View 2 Replies
View Related
Jan 28, 2008
Hi all,
I've a requirement to store the output of the stored procedure into temp. tables/ table varibles.
I've 4 select statements as my output of the stored procedure. How do I store the results of all the 4 select stmnts into 4 different temp tables.
Simplified SP is as...
Create procedure usp_test
as
begin
select c1,c2 from table1
select c3,4 from table2
select c9,c8 from table3
select c5,c7 from Table4
end
I'm expecting something like this...
declare @table1 table (c1, c2)
insert into @table1
Exec <Sp_Name>
select * from @table1
I know the above stmnt works, if my SP has only 1 select stmnt as output.
Please help me to acheive this for multiple select statements.
Thanks,
View 5 Replies
View Related
May 22, 2008
Hi All,I am looking for a store procedure or any alternate method which save my html file(s) text (with or without tags) in my table column automatically when I upload my html file to my file system (local hard drive).any help will be appreciate.Thanks in advance.
View 7 Replies
View Related
Jan 20, 2012
I have a code that is working, and want to create a store procedure in order to put the information of the running code into a new table.
View 7 Replies
View Related
Jul 15, 2015
I wanted to know if it is possible to run a stored proc (report) when a new record is inserted / updated into a certain table. Also if it could do so for records with a column that meet a certain criteria ie. sell description like '%test%'
View 2 Replies
View Related
Nov 4, 2014
I passed .net datatable from a .net app to a store procedure. From this store procedure, how to code to bulk insert (or another way) to SQL table?
View 7 Replies
View Related
Apr 20, 2015
I have on stored procedure which returns mote than one resultset i want that to store in two different temp table how can achieve this in SQL server.
Following is the stored procedure and table that i need to create.
create procedure GetData as begin select * from Empselect * from Deptend
create table #tmp1 (Ddeptid int, deptname varchar(500),Location varchar(100))
Insert into #tmp1 (Ddeptid , deptname ,Location )
exec GetData
create table #tmp (empid int , ename varchar(500),DeptId int , salary int)
Insert into #tmp (empId,ename,deptId,salary)
exec GetData
View 9 Replies
View Related
Apr 9, 2015
I am having one store procedure which use to load data from flat file to staging table dynamically.
Everything is working fine.staging_temp table have single column. All the data stored in that single column. below is the sample row.
AB¯ALBERTA ¯93¯AI
AI¯ALBERTA INDIRECT ¯94¯AI
AL¯ALABAMA ¯30¯
After the staging_temp data gets inserted into main table.my probelm is to handle such a file where number of columns are more than the actual table.
If you see the sample rows there are 4 column separated by "¯".but actual I am having only 3 columns in my main table.so how can I get only first 3 column from the satging_temp table.
Output should be like below.
AB¯ALBERTA ¯93
AI¯ALBERTA INDIRECT ¯94
AL¯ALABAMA ¯30
How to achieve above scenario...
View 1 Replies
View Related
Mar 14, 2004
I have a table that includes the html-output of different parts of my pages. This table grows very big very fast, and rows older than 24 hours are useless.
My question is if it is possible to have temporary rows, whose are automatically deleted after these 24 hours? And then how to accomplish that?
View 2 Replies
View Related
Nov 13, 2006
I know I can call store procedure from store procedure but i want to take the value that the store procedure returned and to use it:
I want to create a table and to insert the result of the store procedure to it.
This is the code: Pay attention to the underlined sentence!
ALTER PROCEDURE [dbo].[test]
AS
BEGIN
SET NOCOUNT ON;
DROP TABLE tbl1
CREATE TABLE tbl1 (first_name int ,last_name nvarchar(10) )
INSERT INTO tbl1 (first_name,last_name)
VALUES (exec total_cash '8/12/2006 12:00:00 AM' '8/12/2006 12:00:00 AM' 'gilad' ,'cohen')
END
PLEASE HELP!!!! and God will repay you in kind!
Thanks!
View 7 Replies
View Related
Jan 4, 2008
hi
what are temporary store procedure and where they are used,can u give me an example where the temporary stored procedures are used.
can we create a procedur with in a procedure?
View 3 Replies
View Related
Sep 3, 1998
When I use comands insert and update with VB5 and ODBC, one temporary stored procedure is created in database tempdb to each command executed.
These stored procedures are deleted only when the connection is closed.
My program use comands insert and update inside a loop, and a lot of temporary stored procedure are generated and full the database tempdb. When it occur, others systems are afecteds.
My questions:
Why it occur ?
Wich have created this stored procedure ?
How to avoid it occur ?
The versions are:
SQL Server 6.5
Visual Basic 5.0
SQL Server ODBC Driver 2.65.0240
View 4 Replies
View Related
Nov 15, 2006
Hi,If one uses a temporary table/ table variable within a storedprocedure, will it use the compiled plan each time the stored procedureis executed or will it recompile for each execution?Thanks in advance,Thyagu
View 1 Replies
View Related
Apr 10, 2008
How do I use table names stored in variables in stored procedures?
Code Snippetif (select count(*) from @tablename) = 0 or (select count(*) from @tablename) = 1000000
I receive the error 'must declare table variable '@tablename''
I've looked into table variables and they are not what I would require to accomplish what is needed.
After browsing through the forums I believe I need to use dynamic sql particuarly involving sp_executesql. However, I am pretty new at sql and do not really understand how to use this and receive an output parameter from it(msdn kind of confuses me too). I am tryin got receive an integer count of the records from a certain table which can change to anything depending on what the user requires.
Code Snippet
if exists(Select * from sysobjects where name = @temptablename)
drop table @temptablename
It does not like the 'drop table @temptablename' part here. This probably wouldn't be an issue if I could get temporary tables to work, however when I use temporary tables i get invalid object '#temptable'.
Heres what the stored procedure does.
I duplicate a table that is going to be modified by using 'select into temptable'
I add the records required using 'Insert into temptable(Columns) Select(Columns)f rom TableA'
then I truncate the original table that is being modified and insert the temporary table into the original.
Heres the actual SQL query that produces the temporary table error.
Code Snippet
Select * into #temptableabcd from TableA
Insert into #temptableabcd(ColumnA, ColumnB,Field_01, Field_02)
SELECT ColumnA, ColumnB, Sum(ABC_01) as 'Field_01', Sum(ABC_02) as 'Field_02',
FROM TableB
where ColumnB = 003860
Group By ColumnA, ColumnB
TRUNCATE TABLE TableA
Insert into TableA(ColumnA, ColumnB,Field_01, Field_02)
Select ColumnA, ColumnB, Sum(Field_01) as 'Field_01', Sum('Field_02) as 'Field_02',
From #temptableabcd
Group by ColumnA, ColumnB
The above coding produces
Msg 208, Level 16, State 0, Line 1
Invalid object name '#temptableabcd'.
Why does this seem to work when I use an actual table? With an actual table the SQL runs smoothly, however that creates the table names as a variable problem from above. Is there certain limitation with temporary tables in stored procedures? How would I get the temporary table to work in this case if possible?
Thanks for the help.
View 6 Replies
View Related
Jun 7, 2005
What I am trying to do now is combine multiple complex queries into one table
and query it showing the results on an ASP.net page.
I am currently using SQL Server 2000 backend. Each one of these queries are
pretty complex so I created each query as a Stored Procedure. These queries are
dynamic by each user, so the results will never be the same globally.
What I have done so far was created a master stored procedure passing the
current user's username as a parameter. Within the master SP (Stored Procedure)
it creates a temporary table inserts and executes multiple stored procedures and
inserts into the temporary directory. Each of the sub stored procedures all
have the same columns. After the insert to the temp tables, I then query the
temp table and return it to the function it was executed in code and fill it as
a System.Data.DataTable. I then bind the DataTable to a
Repeater.DataSource.
Problem: When the page is rendered, it returns nothing. I
tested the master SP in the data environment and it works fine.
Suspect: ASP.net when the SP is executed, it sees that the
data is a disconnected datasource? Perhaps the session in the SQL Server when
the temp table is created isn't in SYSOBJECTS system table?
Here is an example of the code from the master SP:
CREATE PROCEDURE dbo.TM_getAlerts @Username
varchar(32)ASCREATE TABLE #MyAlerts ([DATE] datetime, [TEXT]
varchar(200), [LINK] varchar(200) )
INSERT INTO #MyAlertsEXEC
TM_getAlertsNewTasks @Username
INSERT INTO #MyAlertsEXEC
TM_getAlertsLateTasks @Username
SELECT [DATE] AS 'DATE', [TEXT]
AS 'TEXT', [LINK] AS LINK FROM #MyAlerts
GO
It is a fairly simple call... but why doesn't ASP.net doesn't see it when the
the DataTable is filled. I tried just executing one of the sub SP without
creating temporary tables and it works flawlessly. But the query in one of the
sub SP is a normal but complex select.
View 5 Replies
View Related
Jul 23, 2005
Using SQL against a DB2 table the 'with' key word is used todynamically create a temporary table with an SQL statement that isretained for the duration of that SQL statement.What is the equivalent to the SQL 'with' using TSQL? If there is notone, what is the TSQL solution to creating a temporary table that isassociated with an SQL statement? Examples would be appreciated.Thank you!!
View 11 Replies
View Related
Mar 10, 2008
Is it possible to insert data into a table from a temporary table that is inner join?
Can anyone share an example of a stored procedure that can do this?
Thanks,
xyz789
View 2 Replies
View Related
Jun 14, 2006
I would like to create a stored procedure which creates a temp table tostore some XML. The # of fields of XML is dependent upon the contentsof another table in the application, so the first part of my procedureidentifies the # of fields necessary. That is working correctly. Thesecond part of the procedure actually attempts to create the table.This is where my issue is.If I attempt to create the table as a non-temporary table, theprocedure executes correctly. As soon as I add the hash marks in frontof the table name to indicate that it is a temporary table, it isfailing. Is this a known bug? Or is my code just uncharacteristicallybad? ;)I'm getting an error that says "Invalid object name '#temp'."The section of code that has an issue is (the value of @max is 25 in mytest):SET @xq = 'CREATE TABLE #temp ( respid int, 'SET @i = 0WHILE( @i <= @max ) BEGINSET @xq = @xq + 'response' + CAST( @i AS VARCHAR( 4 ) ) + 'xml'IF ( @i < @max ) BEGINSET @xq = @xq + ', 'ENDSET @i = @i + 1ENDSET @xq = @xq + ' )'SELECT @nxq = CAST( @xq AS NVARCHAR( 40000 ) )EXECUTE sp_executesql @nxq......DROP TABLE #temp
View 3 Replies
View Related
Nov 29, 2006
Banti writes "IF i create temporary table by using #table and ##table then what is the difference. i found no difference.
pls reply.
first:
create table ##temp
(
name varchar(25),
roll int
)
insert into ##temp values('banti',1)
select * from ##temp
second:
create table #temp
(
name varchar(25),
roll int
)
insert into #temp values('banti',1)
select * from #temp
both works fine , then what is the difference
waiting for ur reply
Banti"
View 1 Replies
View Related
Oct 25, 2006
This post is related to SQL server 2000 and SQL Server 2005 alleditions.Many of my stored procedures create temporary tables in the code. Iwant to find a way to find the query plan for these procsRepro--***********************************use pubsgoCREATE PROCEDURE Test @percentage intASSET Nocount on--Create and load a temporary tableselect * into #Temp1 from titleauthor--Create second temporary tablecreate table #Temp2 ( au_id varchar(20), title_id varchar (20), au_ordint, rolaylityper int)--load the second temporary table from the first oneinsert into #Temp2 select * from #Temp1goset showplan_Text ONgoEXEC Test @percentage = 100GOset showplan_Text OFFgo**************************************I get the following errorServer: Msg 208, Level 16, State 1, Procedure Test, Line 10Invalid object name '#Temp2'.Server: Msg 208, Level 16, State 1, Procedure Test, Line 10Invalid object name '#Temp1'.I do understand what the error message means. I just want to know abetter way of finding the query plan when using temp objects.My real production procs are hundreds of lines with many temp tablesused in join with other temp tables and/or real tables.Regards
View 3 Replies
View Related
