Collate SQL_Latin1_General_CP850_BIN To SQL_Latin1_General_CP1_CI_AS
Jul 23, 2005
Hi, I have a SQL Server for a SAP database with the collation
SQL_Latin1_General_CP850_BIN. When I connect to that server (or, in
this example, to another server with the SQL_Latin1_General_CP850_BIN
collation) and execute a select, the accents seem weird:
select t.TEXT
from [GC-SAP02].P01.p01.AGR_TEXTS t
where t.MANDT = '300'
and t.SPRAS = 'E'
and t.AGR_NAME = 'ZCD_GEST_DEUDA_PATENTE_SD'
TEXT
-----------------------------------
Gesti¾n de deudas patentes en SD UP
(1 row(s) affected)
But if I connect to a "normal" SQL Server with a
SQL_Latin1_General_CP1_CI_AS collation, and execute the same select
thru a linked server:
TEXT
-----------------------------------
Gestión de deudas patentes en SD UP
(1 row(s) affected)
I need to perform the select connected to the
SQL_Latin1_General_CP850_BIN and get the results as I were connected to
the SQL_Latin1_General_CP1_CI_AS server. I tried with cast and collate,
but I can't get it to work:
select t.TEXT collate SQL_Latin1_General_CP1_CI_AS
from [GC-SAP02].P01.p01.AGR_TEXTS t
where t.MANDT = '300'
and t.SPRAS = 'E'
and t.AGR_NAME = 'ZCD_GEST_DEUDA_PATENTE_SD'
I do not have a backup of the model database and have had to rebuild SQL Server 2000 once already. All my databases except model and tempdb have the collation SQL_Latin1_General_CP1_CI_AS those two have Latin1_General_CI_AS.
During SQL rebuild I've restored over master and msdb and they work fine. Only came across problem with stored procedure and I'm lost as to how to alter model without a backup of it.
Any easy way to change model collation? The command listed in subject fails as it is a system table.
Is it as simple as going into single user mode and trying that command again?
What is 'COLLATE SQL_Latin1_General_CP1_CI_AS'? I am new to SQLServer, and couldn't find much information on the Web. Also, I am trying to understand user defined data types. For example,
In the following example, what is '[Price_DT]' data type? and how would it be referenced at the time of 'INSERT'.
CREATE TABLE [dbo].[Dist_Orders_Master_Index] ( [SubTotal] [Price_DT] NOT NULL , [Tax] [Price_DT] NOT NULL ) ON [PRIMARY]
Hello everyone, recently I experienced a weird problem on my sql host, and my service provider sent me an email told me that my database encoding didn't match their standard. in the mail they said their standard was "SQL_Latin1_General_CP1_CI_AS" and my database was "Latin1_General_CI_AS". I did some research on google with no luck, most of them involved command line and stuff, which made me totally confused since I'm a sql server newbie.I created this database using VS2005's wizard, with all default settings. Therefore I hope someone here could help me out. thanks in advance.-yonk
I€™m creating a new named instance in SQL2005 , by default the instance created with €œLatin1_General_CI_AS€? collation.
I want to change this collation to €œSQL_Latin1_General_CP1_CI_AS€?, but sincerely I don€™t have a clue how to select it on the collation setting window :
I hit this error when I tried to do something like:
Code Snippet create table #tempTable (ID int IDENTITY(1,1) NOT NULL , column1 varchar(200) NOT NULL) INSERT INTO #tempTable Values('test') create table tempTable (ID int IDENTITY(1,1) NOT NULL , column2 varchar(200) NOT NULL) INSERT INTO tempTable Values('test') Select * from #tempTable t inner join tempTable p on t.ID = p.ID where t.column1 = p.column2
After a thorough search on sysobjects and syscolumns, I found the collation problem on database "temp" is set to "Latin1_General_CI_AS"
since it's an system db, I cannot alter. My db also cannot alter because some SP is encrypted, though I cna de-crypt it. Is that anyway to solve it by running the script??
I tried to do something like: start /wait setup.exe /qb INSTANCENAME= {my MSSQL 2005 insatnce name} REINSTALL=SQL_Engine REBUILDDATABASE=SAPWD= {my sa password} SQLCOLLATION=SQL_Latin1_General_CP1_CI_AI
but i get no error at Summamry.txt: Setup succeeded with the installation, inspect the log file completely for status on all the components.
while at "SQLSetup0011__Core.log":
Error: Action "LaunchPatchedBootstrapAction" threw an exception during execution. Error information reported during run: "C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe" finished and returned: 0 Aborting queue processing as nested installer has completed Message pump returning: 0
Have an old DB (6.5) Upgrade to (8.0). And when i make a script from the SQL.8 to the backup server i gett Collate Errors. So i wonder if there are someway to script the Table without the Collate´s or if i can make som settings on the Backup server so it will accept Collate in the script..
I am new to Stored Procedure, so I want to find out what is COLLATE Latin1_General_BIN means?
For example:
Declare @Var_Tbl Table (CUSTID INT NOT NULL, FIRSTNAME VARCHAR(20) COLLATE Latin1_General_BIN NOT NULL, CUSTOMER VARCHAR(9) COLLATE Latin1_General_BIN NOT NULL )
I am attempting an import of an SQL DB from a local MSDE SQL Server to an SQLServer 2000. I used the Web Data Administrator to create an export file, and then I wanted to perform an import to the actual server. I get the error "Syntax error near 'COLLATE'". I don't know much about syntax when it comes to this. Here is a snippet from there. I am new to this, so I hope someone out there can help me out. CREATE DATABASE [NewDB] ON (NAME = N'NewDB', FILENAME = N'CORRECTFILEPATH' , SIZE = 3, FILEGROWTH = 10%) LOG ON (NAME = N'NewDB_log', FILENAME = N'CORRECTFILEPATH' , SIZE = 1, FILEGROWTH = 10%) COLLATE SQL_Latin1_General_CP1_CI_AS GO All the "N" don't look like they belong, but they have been added throughout the entire SQL document.
i have a sp that when i add to a CS database it doesnt give me an error but when i add to a CI database it errors out. what can i do to it to make it not error on the CI situtation?
set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go
-- Accounts Payable ALTER PROCEDURE [dbo].[isp_ap_calc_apt_totals] @p_comp char(2), @p_vend char(6), @p_asofdate char(8) as
if (@p_asofdate <= '00000000') begin set @p_asofdate = '99999999' end
delete from XAPAPTTOT where xapt_comp = @p_comp and xapt_vend = @p_vend and xapt_asof_date = @p_asofdate
insert into XAPAPTTOT select apph_comp, apph_vend, apph_type, apph_id, @p_asofdate, sum(apph_paymnts), sum(apph_discts), sum(apph_adjts), count(apph_paymnts), sum(apph_paymnts)+ sum(apph_discts) + sum(apph_adjts) + (select apt_gross from APTRANF where apt_comp = @p_comp and apt_vend = @p_vend and apt_type = apph_type and apt_id = apph_id), 0, max(str(yy,4) + replace(str(mm,2),' ','0') + replace(str(dd,2),' ','0')) from APPHISTF where apph_comp = @p_comp and apph_vend = @p_vend and str(yy,4) + replace(str(mm,2),' ','0') + replace(str(dd,2),' ','0') <= @p_asofdate group by apph_comp, apph_vend, apph_type, apph_id
update XAPAPTTOT set xapt_last_payck = (select max(apph_payck) from APPHISTF where apph_comp = xapt_comp and apph_vend = xapt_vend and apph_type = xapt_type and apph_id = xapt_id and str(yy,4) + replace(str(mm,2),' ','0') + replace(str(dd,2),' ','0') = xapt_last_paydt ) where xapt_comp = @p_comp and xapt_vend = @p_vend and xapt_asof_date = @p_asofdate
I created DB Generator and want to enable user choose collate which desired. So I would like to retreive all collate in SQL Server to show for user can see all available collate.
Hi,Good morning to All. I have some doubt.I cannot do anything without knowing the reason why we are doing that particular thing. Any way, my doubt is: While creating table, in some places I see COLLATE clause. For example, recently I have seen this. CREATE TABLE dbo.OrderDetails( OrderDetailID INT IDENTITY(1,1) NOT NULL, ItemNumber VARCHAR(20) COLLATE SQL_Latin1_General_CP1_CI_As NULL, Qty INT NULL)ON [PRIMARY] In the above table, why the Collate clause for ItemNumber column? What is the advantage with that clause?I have seen sql server help for this. I have found 1011 results for the query SELECT * FROM fn_helpcollations().Then I searched for SQL_Latin related collations using: SELECT * FROM fn_helpcollations() where name like 'SQL_Latin%'I have found 31 results.How can I know which clause i have to use for which type of query? Can anybody please tell answers for all these doubts? Thanks in advance. Regards,Ashok kumar.
I am getting an error inserting a simple text file into a SQL2000 database table. The text file is one column, comma delimited, and the DTS package to insert it into a table fails citing an error executing a 'COLLATE' statement. Thanks for the help!
We're upgrading to SQL Server 2005, and we've restored databases from SQL Server 2000 to the development server (SQL Server 2005). Part of what we need to do is alter the database collation to SQL_Latin1_General_CP1_CI_AS; our SQL Server 2000 server is case-sensitive.
My initial attempts to alter the database;
alter database RGDWDEV collate SQL_Latin1_General_CP1_CI_AS
failed because of the presence of computed columns and user functions. So, I wrote scripts to save the definitions of the computed columns and functions, and wrote scripts to drop them. Now that they are gone, I expected to be able to successfully execute the above 'alter database' statement, but I am now getting this error;
Msg 1505, Level 16, State 1, Line 1 CREATE UNIQUE INDEX terminated because a duplicate key was found for object name 'sys.sysschobjs' and index name 'nc1'. The duplicate key value is (0, 1, DISB_ADJ). Msg 5072, Level 16, State 1, Line 1 ALTER DATABASE failed. The default collation of database 'RGDWDEV' cannot be set to SQL_Latin1_General_CP1_CI_AS.
Hi, i'm having a problem with my database. When i created it i specifie the collate sql_latin1_general_cp1_ci_as but now that i'm working on my domain server, the server only acepts databases with the collate latin1_general_ci_as so i tried to change my current (on my localhost) collate but i'm always getting this error:
Msg 5030, Level 16, State 2, Line 2
The database could not be exclusively locked to perform the operation.
Msg 5072, Level 16, State 1, Line 2
ALTER DATABASE failed. The default collation of database 'databasexpto' cannot be set to Latin1_General_CI_AS.
Hi, I'm trying to do a search over a table, the problem is that the default collate applied by this transofrmation is case sensitive... i need a non case sensitive collate. If i edit the SQL Statement to set another Case sensitive collate manually inside the statement, the problem is that if a field (wich is involved in search transformation ) has a null value, the transformation doesnt find any record (it doesnt happens if a dont introduce manually the collate in the statement, null values dont rise any error, and the transofrmation works fine).
Tried a few ways and I can ge this to work at the end in then WHEN part. Just struggling to put this together to be accepted as a CASE WHEN statement, probably missing the obvious.
Case when Postcode like '%[abcdefghijklmnopqrstuvwxyz%]' then 'Lowercase Postcode' else 'Postcode OK' end as [DQPostcode]
collate Latin1_General_CS_AS
Simple terms looking for all instances of Lowercase characters in the Postcode field
I build a asp.net web site on my laptop and accessting data with my vb.net code from SQL server 2005 which is installed on windows 2003 R2 server. All works fine.
but when I hosted this website on the IIS server which is physically the same Windows 2003 Server R2 with SQL Server 2005, the sql queries are not executing well and not getting the result. After some R&D What I found is that the Column Names CASE in the SQL Database and in my SQL Query is not matching. I find that SQL server 2005 collate is allready set to SQL_Latin1_General_CP1_CI_AS. I have lots of pages with lots of sql queries and near about 500 SQL Databases, and its quiet tuff to match all columns CASING.
1. How can I change the collate of windows 2003 server R2?
or
2. How can I run my wesite on this Server properly?
3. What is actually going on (website working on Windows XP but not working well on Windows 2003 server).
I have a query however i am getting the following error message “Msg 447, Level 16, State 0, Line 1 Expression type numeric is invalid for COLLATE clause.“
This is my query
SELECT sjo.ID, sjo.MID, sjo.Trade_Association_Name, da1.Account_Name As Trade_Association_Name, substring(do.[MM-CHN-AGENT],2,12) as Mass_Agent_Chain_No,
[Code] ....
And Dan.Stg_Jitter_Opp2 table consists of the following
ColumnNameData Type Idvarchar(50) Mid numeric(18, 0) RecordTypeIDvarchar(50) Trade_Association_Name varchar(50)
And [FDMS].[SalesForce].[DailyAccounts]table consists of the following
ColumnNameData Type Idint Account_Idvarchar(18) account_Name varchar(150) mid_externalvarchar(15) Mid_internalvarchar(15)
