I'm somewhat of a newbie and I need to create a view with a column
that is not derived from any other tables. What I want is for this
field to be an auto-increment field or some kind of UID. Can anyone
quickly tell me how to do this.
Here is my dilemma. I need to pull data from a unique data set from a
table which does not have a primary key, and none exists in its data.
Please tell me how to put this data in a view(or another table) so
that I can pull it out with unique records. It doesnt matter what the
unique field consists of.
Hi im trying to create a view that creates another column for a table and then adds the value but i cant get it could sum1 help
Create View BONUS_PAYOUTS As
Alter Table Employee Add EMP_BONUS Decimal(6,2)
Update Employee Set EMP_BONUS = EMP_PCT / 500000
Select Employee.EMP_LNAME, Employee.EMP_FNAME, Employee.EMP_PCT, Position.POS_TITLE, Employee.EMP_BONUS From Employee Inner Join Position On Employee.POS_ID = Position.POS_ID
I have a table like the followingField1 Field2 Field3------ ------- ------x1 y1 z1x1 y2 z2x1 y3 z3x1 y4 z4x2 y1 z5x2 y2 z6x2 y3 z7x2 y4 z8x3 y1 z9............and so onI want to create a view with x1, x2, x3.. as uniquerecords; y1, y2, y3.... as fields; and z1, z2, z3.... as the valuesWhen I doCREATE VIEW xyz (y1, y2, y3, y4) ASSELECT field1 ,( SELECT field3 FROM table WHERE field2 = 'y1'),( SELECT field3 .....FROM tableI get the error that the sql query creates duplicate values. I think Imay have to do a join using distinct values of field1. I was lookingfor some guidance with the join.Thanks for your help in advance(using SQLSERVER 2000)
Here is My requirement, I'm not sure if this is possible. Creating table called master like col1, col2 col3, col4 , col5 ...Where Col1, col2 are updatable - this can be done easily
Col3, col4 are columns in another table but these can be just a read only ?? Is this possible ? this is possible with View but not friendly with share point CRUD...Col 5 is a computed column of col 2 and col5 ? if above step can be done then sure this can be done I guess.
Hello,Using SQL Server 2000, I'm trying to put together a query that willtell me the following information about a view:The View NameThe names of the View's columnsThe names of the source tables used in the viewThe names of the columns that are used from the source tablesBorrowing code from the VIEW_COLUMN_USAGE view, I've got the codebelow, which gives me the View Name, Source Table Name, and SourceColumn Name. And I can easily enough get the View columns from thesyscolumns table. The problem is that I haven't figured out how tolink a source column name to a view column name. Any help would beappreciated.Garyselectv_obj.name as ViewName,t_obj.name as SourceTable,t_col.name as SourceColumnfromsysobjects t_obj,sysobjects v_obj,sysdepends dep,syscolumns t_colwherev_obj.xtype = 'V'and dep.id = v_obj.idand dep.depid = t_obj.idand t_obj.id = t_col.idand dep.depnumber = t_col.colidorder byv_obj.name,t_obj.name,t_col.name
I have been working on a view and now I want to create a table which has not only similar columns and datatypes but also same data as I have fetched in the view. How can I do that? Do I have to use a cursor or there is a simpler way to do it? Please advice me here..
Can I use Create table <tablename> as ( Select * from <viewname>) ?????
Hi, i have a table with 3 ints that are used to store dates. Thedatetime data type is not used because this data comes from an oldAS400 server.I need to be able to use those 3 columns to build dates within a queryand be able to use them to compare themselves to other datesLet's say the table has the following values:myday mymonth myyear23 5 2006and suppose i want to do a query that displays all rows with dategreater than '20060520'Here is the query i have tried:selectcast(myday as varchar(2))+'/'+cast(mymonth asvarchar(2))+'/'+cast(myyear as varchar(4))from mytableThat query returns the string '23/5/2006' yet i can't use it to compareit with '20060520'Is there a way i can do this in a simple query?This is on sql server 2000
Im very very new to sql server world..wanted to know what kind of indexes to be created on the below mentioned table columns for making this view run fastly.As of now there are no indexes created on these view definition columns
CREATE View hrinu.Parity as select T1.Matcle as CorpID, T2.Nmpres as Name, T4.DATDEB as LeaveFrom, T4.TEMDEB as PM, T4.DATFIN as LeaveTo, T4.TEMFIN as AM, T10.LIBLON as LeaveType, T8.LIBLON as Location, T12.LIBLON as ParentOrg
from HRINU.zy00 T1, HRINU.zy3y T2, HRINU.zy39 T3, HRINU.zyag T4, HRINU.zy38 T5, HRINU.zy1s T6, HRINU.zd00 T7, HRINU.zd01 T8, HRINU.zd00 T9, HRINU.zd01 T10, HRINU.zd00 T11, HRINU.zd01 T12 where T4.Nudoss = T3.nudoss and T4.Nudoss = T1.Nudoss and T1.Nudoss = T2.nudoss and T3.nudoss = T5.nudoss and T6.nudoss = T1.nudoss AND T7.NUDOSS = T8.NUDOSS AND T9.NUDOSS = T10.NUDOSS AND T11.NUDOSS = T12.NUDOSS AND T3.IDWKLO = T7.CDCODE AND T4.MOTIFA = T9.CDCODE AND T5.IDESTA = T11.CDCODE and T6.stempl = 'A' and t7.cdstco = 'z04' AND T8.CDLANG = 'U' and t9.cdstco = 'DSJ' AND T10.CDLANG= 'U' and t11.cdstco= 'DRE' AND T12.CDLANG= 'U' and T4.DATDEB <= T3.DTEN00 and T4.DATFIN >= T3.DTEF00 and T3.DTEN00 <= T5.DTEN00 and T3.DTEN00 >= T5.DTEF00 and T6.dtef1s <= getdate() and T6.datxxx > getdate()
Also Please suggest me some links where i can get info about the indexes that has to be created on these types of queries where joins are involved on these many tables. Also throw some light on how to analyse the execution plan for further enhancements.
I have written a script to pivot a table into multiple columns.
The script works when run on its own but gives an error when i try to create a view or aprocedure from the same script. The temporary table #.... does not work so i have converted it to a cte.
Here is a copy of the script below
-- Dynamic PIVOT IF OBJECT_ID('#External_Referrals') IS NULL DROP TABLE #External_Referrals; GO DECLARE @T AS TABLE(y INT NOT NULL PRIMARY KEY);
I am trying to create a clustered index on a View of a table that has an xml datatype. This indexing ran for two days and still did not complete. I tried to leave it running while continuing to use the database, but the SELECT statements where executing too slowly and the DML statements where Timing out. I there a way to control the server/cpu resources used by an indexing process. How can I determine the completion percentage or the indexing process. How can I make indexing the view with the xml data type take less time?
I am looking to create a constraint on a table that allows multiplenulls but all non-nulls must be unique.I found the following scripthttp://www.windowsitpro.com/Files/0.../Listing_01.txtthat works fine, but the following lineCREATE UNIQUE CLUSTERED INDEX idx1 ON v_multinulls(a)appears to use indexed views. I have run this on a version of SQLStandard edition and this line works fine. I was of the understandingthat you could only create indexed views on SQL Enterprise Edition?
I created a query, which makes use of a temp table, and I need the results to be displayed in a View. Unfortunately, Views do not support temp tables, as far as I know, so I put my code in a stored procedure, with the hope I could call it from a View....
Write a CREATE VIEW statement that defines a view named Invoice Basic that returns three columns: VendorName, InvoiceNumber, and InvoiceTotal. Then, write a SELECT statement that returns all of the columns in the view, sorted by VendorName, where the first letter of the vendor name is N, O, or P.
This is what I have so far,
CREATE VIEW InvoiceBasic AS SELECT VendorName, InvoiceNumber, InvoiceTotal From Vendors JOIN Invoices ON Vendors.VendorID = Invoices.VendorID
So I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:
In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID
I am trying to create a table such as shown below:
This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.
For e.g
Select Test_Name AS 'Test_Name', Table_Bird.Animal AS 'Birds', Table_Mammal.Animal AS 'Mammal', Table_Reptile.Animal AS 'Reptile, Table_Fish.Animal AS 'Fish' From Table_One
[Code] .....
The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.
i have a table which has 2 columns 1 'report' 2 'part' now in my 'report' cloumn i have # with 6 digits ex. '111111' and 'part' has '1, 2, 3, 4,..to 50' i want to create a view that will put them together in format like this: 1111110001 1111110002 1111110003 .. and on it needs to be in 10 digits. is there anyway i can create a View or may be a column in the table which can create the #'s in this format.
What are some possible purposes of creating a view and how can it be used to reinforce data security. What description of circumstances can be used for a view to save re-programming?
I have a sql command with temporary tables, but whenever I am trying to create a view with temporary tables I am getting an error as below:
"Views or functions are not allowed on temporary tables. Table names that begin with ‘#’ denote temporary tables."
Please anybody let me know is it possible to create a view with temporary tables in SQL Server 2005.If not, then is their any way how I can create a view with temporary tables.
I have a sql command with temporary tables, but whenever I am trying to create a view with temporary tables I am getting an error as below:
"Views or functions are not allowed on temporary tables. Table names that begin with ‘#’ denote temporary tables."
Please anybody let me know is it possible to create a view with temporary tables in SQL Server 2005.If not, then is their any way how I can create a view with temporary tables.
I need to create a view that scores a research assessment. So I havequestions 1 through 10, but the problem is that Q3 and Q5-10 have to berecoded so that if the response is 3, it becomes 0, 2=1, 1=2 and 0=3.So this is what I have. I keep getting an error message that there is"incorrect syntax near the keyword THEN". I don't know which "THEN" itis referring to (or all of them)?? HELP! I am new to this.CREATE VIEW name ASSELECT ID, DATE, TOTAL=Q1+Q2+CASE WHEN (Q3=0 THEN 3 WHEN Q3=1 THEN 2 WHEN Q3=2 THEN 1 WHEN Q3=3 THEN0)+Q4+CASE WHEN (Q5=0 THEN 3 WHEN Q5=1 THEN 2 WHEN Q5=2 THEN 1 WHEN Q5=3 THEN0)+CASE WHEN (Q6=0 THEN 3 WHEN Q6=1 THEN 2 WHEN Q6=2 THEN 1 WHEN Q6=3 THEN0)+CASE WHEN (Q7=0 THEN 3 WHEN Q7=1 THEN 2 WHEN Q7=2 THEN 1 WHEN Q7=3 THEN0)+CASE WHEN (Q8=0 THEN 3 WHEN Q8=1 THEN 2 WHEN Q8=2 THEN 1 WHEN Q8=3 THEN0)+CASE WHEN (Q9=0 THEN 3 WHEN Q9=1 THEN 2 WHEN Q9=2 THEN 1 WHEN Q9=3 THEN0)+CASE WHEN (Q10=0 THEN 3 WHEN Q10=1 THEN 2 WHEN Q10=2 THEN 1 WHEN Q10=3THEN 0) ENDFROM tablename
I have a sql command with temporary tables, but whenever I am trying to create a view with temporary tables I am getting an error as below:
"Views or functions are not allowed on temporary tables. Table names that begin with €˜#€™ denote temporary tables."
Please anybody let me know is it possible to create a view with temporary tables in SQL Server 2005.If not, then is their any way how I can create a view with temporary tables.
I currently have a website with a page that displays the flags/ keys of the entire roster of guilded characters. Some more background is that I run a website for my Everquest guild, users can log in , create characters , and update their flags / keys. There are 4 associated tables that are used in displaying the flags. the Characters , Flags, Expansion, and Char_Flags tables. The char_flags table consists of 2 foreign keys and a bit field for enabled / disabled. Char_flags = char_fk, flag_fk, enabled (bit) The select statement I'm currently using to get information is as follows. SELECT Expansion.ExpansionName, Flags.Flag_Name, Characters.Char_Name, char_flags.enabled FROM char_flags INNER JOIN Flags ON char_flags.Flag_FK = Flags.Flag_PK INNER JOIN Expansion ON Flags.Expansion_FK = Expansion.ExpansionPK INNER JOIN Characters ON char_flags.Char_FK = Characters.Char_PK WHERE (Expansion.ExpansionPK = @expansion) That displays the information in a format like Expansion Name, FlagName, CharacterName, Enabled. And there are usually 10 -15 flags per expansion so this lists the expansion 10 times, each flag name, then the character name 10-15 times, and wether or not the flag is enabled.
I would like to display the information a little differently and I'm not sure how to. I would like to display the inormation like this Flag Name 1 Flag Name 2, Flag name 3, Flag Name 4, etc... Char 1 X X X Char2 X X X Char 3 X X X X Char 4 Char 5 etc where the characters make up the first column, the flag names make up the first row(headers) and wether or not the flag is enabled is in the column under the corresponding flag. This way the name of the flag, and the character name are only displayed one time instead of the flags and character names being repeated over and over. If anyone can help me on how to display the data I would appreciate it. Here is a link to the page to show how it looks now if it helps www.shattereddestinies.net/flagstest.aspx Thanks Brad Fortner
I have a query on one of my pages that is just too large to keep in the page, so I need to reference a stored view in sql. I'm kind of new to this, so I'm having trouble getting the syntax right. The query is just a simple select statement using the results of several textboxes as parameters. I know how to do the query inside an asp.net page, but when I move it to sql, I don't know how to reference the textbox value i.e. @textbox. Here's what I have so far: USE [Maindb] GO CREATE VIEW [tblMain_view] (@textbox nvarchar(30)) ???? AS SELECT dbo.tblMain.Field1, .... FROM dbo.tblMain WHERE dbo.tblMain.Field1 = @textbox and ....
First of all, I know that where I declare @textbox is wrong, so where is the right place to declare it? Also, how do I reference the view from the webpage and do I still use: cmd.SelectCommand.Parameters.Add . . . in the page to establish the value. Anyone know a good tutorial on this. All the ones I've found were either in C# or didn't really apply. I need to know how to do this in VB. Thanks
Hi I have two SQL server 2000 machine in my corporateHow to create a SQL View if the database table is located on another SQL server?Example :I am currently working at SQL Server "S01", but need to create a sql view to table customer on "Marketing" database located on SQL Server "S02"if the table is reside on the same machine then it's simple for me, but this customer table is not located on "S01" but located on different machine "S02"how to do this? any tutorial?thanks a lotYonscun
Hi guys, I am trying to create a view through SP as follows, but I am getting as error as Invalid syntax near view. Please let me know where I am doing wrong.
Thanks,Rau CREATE PROCEDURE PurgeReport @intJob as int AS if @intjob=1 begin CREATE VIEW Purge AS SELECT Btch_id AS Batch_ID, DLN, Process,End_DLN, Job, Tcode FROM Batch_HDR end
Need help in writing a query. I have a table contains details about an item. Each item belongs to a group. Items have different status. If any one of the item in a group is not "Completed", then the itemgroup is in state incomplete. if all the item under the group is completed then the item group itself is completed. Now I need to create a view with itemgroup and itemstatus. Suppose I have five records
I'm using SQL Server 2008 to solve the following exercise.
I have three Tables: Table CUSTOMER with columns: CustomerID,Company,ContactName,Phone Table ORDER with columns: OrderID,OrderDate,ShippedDate,ShipperID,Freight,CustomerID Table Shipper with columns:ShipperID,Company,Phone
I need to Create a view listing the shipper and the number of unshipped orders. I have been trying to use joins or possibly subqueries, but I'm not getting a correct result for a ShipperID with NO unshipped orders.My view should looks like: ShipperID, Company, Phone, UnshippedOrders
I am looking to create a new view by combining two tables, but i would like to create a new column in the view that identifies what table the data came from. For example I have a Table A and Table B, using a union i combined the two table but i want a new column titled Source which could be populated by A or B.
This is my code so far:
Create View Table_AB As Select *From Table_A Union All Select*From Table_B
(1) create view qcostcentre as select * from dbo.costcentre.dtblcostcentre
>ERR: Msg 208, Level 16, State 1, Procedure qcostcentre, Line 4 Invalid object name 'dbo.costcentre.dtblcostcentre'.
(2) create view qcostcentre as select * from costcentre.pcusers.dbo.dtblcostcentre
>ERR: Msg 7202, Level 11, State 2, Procedure qcostcentre, Line 4 Could not find server 'costcentre' in sys.servers. Verify that the correct server name was specified. If necessary, execute the stored procedure sp_addlinkedserver to add the server to sys.servers.
note: pcusers is a user of 2 database (costcentre & datamaster) with dbo_datareader owned & role schema .
I am trying to create an indexed view, on a date from a date dimension table...I am new to SQL, and I am at a loss of ideas on this one. Any help would be greatly appreciated!
Here is the Error I am given
"Msg 4513, Level 16, State 2, Procedure VEW_F_MZT_ORDER_HEADER_DAY, Line 3
Cannot schema bind view 'JJWHSE.VEW_F_MZT_ORDER_HEADER_DAY'. 'JJWHSE.VEW_F_INVC_SHIP_TO' is not schema bound.
Msg 1939, Level 16, State 1, Line 1
Cannot create index on view 'VEW_F_MZT_ORDER_HEADER' because the view is not schema bound."
Here is my code..
CREATE VIEW [JJWHSE].[VEW_F_MZT_ORDER_HEADER_DAY] WITH SCHEMABINDING
AS
SELECT TEW_D_DT.DT_KEY AS DATE_KEY,
VEW_F_MZT_ORDER_HEADER.LOCATION_KEY AS LOC_KEY,
TEW_D_LOC.LOC_DESC AS LOC_DESC ,
TEW_D_LOC.RGN_DESC AS REGION_DESC,
TEW_D_LOC.DISTRICT_DESC AS DISTRICT_DESC,
ISNULL(SUM(VEW_F_INVC_PAY_EXT.PRORATED_NET_PRICE),0) AS CONCIERGE_FLASH,
Hi all. I'm new to SQL Server and I've run into a tough problem. I currently have a SQL Server database with 54 US states/territories tables. I'm working on creating a view so that I can view all the states data in a single table-like structure. I've mapped all the columns from all the different tables to their new names and made sure that all the new attributes match. When I use the Management Express tool to open the view, it executes but fails because for some reason it's chosen to map a field called 'id' into an int, rather than a varchar. Is there a way to force the view to treat the 'id' as a varchar and not an int? I can't see a way to change its type through the GUI tools.
Hello,I am having an error when using the CREATE VIEW statement and trying to execute it from an ASP.net page. I get an error that says something along the lines of 'dbo' schema does not exist or you do not have permissions to access it. I have checked and the user has been granted every permission I can think of (including setting it to the DB owner), but it does not work. I am able to execute all the Select, Update, Insert statements that I wish to, and when I copy the statement into the SQL 2005 Management studio query menu it works perfectly, it just gives the error message from the ASP.net page.Here is an example (or as close as I can remember at this point) of some code I tried:myCommand.Connection = myConnectionmyCommand.Open()myCommand.CommandText = "Create View TestView as Select 1, 2"myCommand.ExecuteNonQuery()myCommand.Close() Any help would be appreciated.Thanks,StuporMan
I am still confounded with how to create a VIEW involving multiple DATATABLES in a DATASET. Could someone point out a MSDN page where I can see this working and how I go about doing this? Let me re-iterate - I want to create a VIEW that uses JOIN type statements that involves multiple DATATABLES in my loaded DATASET.
