I have an OLE DB destination which should insert data into a table named in an SSIS variable. When I run the package, I don't get any errors and I have a data viewer which shows that the data is reaching the OLE DB destination. However, the data isn't being inserted into the destination table.
Can someone suggest how I should go about debugging this?
Thanks in advance.
Hi,
I have found that when I'm debugging a custom component in BIDS that I've created in another instance of Visual Studio, every time I rebuild the component I have to shutdown and restart BIDS and then reattach to the BIDS process. Which is pretty time consuming... And if I find a small error in my custom component when debugging then I don't seem to be allowed to make any changes to the code unless I stop debugging and go through the process above.
Am I missing something here? Or do I really have to manually go through these steps every time I want to change code in the component I'm debugging?
Can I automate the process with MSBuild or NAnt? If so, is there an example of this anywhere?
Thanks in advance,
Lawrie.
Hey All:
I was totally confused.
When designing the SSIS dataflow part, firstly , i tried SQL Server Destination because my target server is a sql server.
then execute the task with failure.
Then i tried to use OLE DB DESTINATION instead of SQL Server Destination.
This Dataflow worked.
i can not figour out why.
By the way , i used the connection is OLE DB.And i choosed OLE DB source as the datasource cuz i can not find SQL server datasource.
Who can tell me some reasons for this?
Hi.
I need to step into a SP on my SQL server. However, I get "Security hasn't been setup correctly on server RADU. SQL debugging terminated."
I read the docs, and I did exactly this (as per the help files):
---------------------------------------------------------------------------------------------------
To configure DCOM on the server for SQL debugging
You may need to download and install DCOM first. If so, go to http://www.microsoft.com/com/resources/downloads.asp for the latest version.
You must have administrator privileges on the machine where you are configuring DCOM.
From the Start menu, choose Run.
In the Open box, type dcomcnfg.exe.
Click OK.
The Component Services dialog box appears.
In the left pane of the Component Services dialog box, expand the Component Services node and find Computers.
Expand the Computers node and find the computer for which you want to configure DCOM.
Right-click the computer and choose Properties from the shortcut menu.
In the Properties dialog box, select the Default COM Security tab.
Under Access Permissions, click Edit Default.
The Access Permission dialog box appears.
If the group or user who needs access does not appear in the list of permissions, click Add.
The Users, Computers, or Groups dialog box appears.
In the Enter the object names to select box, type the name of the group or user who needs access.
Click OK.
The user is now added to the list.
If SYSTEM does not appear in the list of permissions, click Add.
The Users, Computers, or Groups dialog box appears.
In the Enter the object names to select box, type:
SYSTEM
Click OK.
SYSTEM is now added to the list.
In the Access Permission, select Allow for each user you added.
Click OK to close the Properties dialog box.
If you changed any settings in this procedure, restart SQL Server.
---------------------------------------------------------------------------------------------------
However, from inside VSnet IDE. I get the same message ("Security hasn't been setup correctly blah-blah-blah").
I have tried with users 'ASPNet' and 'VSDevelopers'. Which user should I choose ? Is there something else I should do ?
Sure, this is not the end of the world, I can still do the debug from within Query Analyzer, but still, it would be nice not to have to do this.
Thank you.
Alex
Hi,Is there a way to debug an SQL Server stored procedure? I call a number of sp's from my .net app and need a way to step through them.Thank you,
View 4 Replies View RelatedDoes anyone use SQL debugging? I write pocedures in SQL server useing Developper studio, but i do not find any means to debug stored procedures.
Though i can place a break point to source code of sp_procedure, code is runned a whole.
Is this means only for C++?
Can anyone help me?
I have very large procedures and someteimes it is hard to find an error.
Ludek
select
if(acr_application.appStatus = 'AOO' then acr_application.appDt,
if(acr_application.appStatus = 'A01' then acr_application.recvdDt,
if(acr_application.appStatus = 'A02' then
(select A.payDt from acr_payment A, acr_reference_no B
where A.refNo = B.acrReferenceNoId and B.refType = 'ACF' and B.appNo =
acr_application.appNo),
if(acr_application.appStatus = ('A03', 'A08'),
(select C.updatedBy from acr_insp_sched C
where C.appNo = acr_application.appNo and C.seqNo =
(select max (D.seqNo) from acr_insp_sched D where D.appNo = C.appNo)),
if (acr_application.appStatus = ('A04', 'A05', 'A06', 'A15'),
(select E.updatedBy from acr_inspection E
where E.appNo = acr_application.appNo and E.seqNo =
(select max (F.seqNo) from acr_inspection F where F.appNo = E.appNo)),
if(acr_application.appStatus = 'A07',
(select G.payDt from acr_payment G, acr_reference_no H
where G.refNo = H.refId and H.refType = 'REI' and H.appNo =
acr_application.appNo),
if(acr_application.appStatus = ('A10', 'A11'), acr_application.approvedDt,
if(acr_application.appStatus = 'A13', acr_application.updatedBy,
if(acr_application.appStatus = 'A14',
(select H.payDt from acr_payment H, acr_reference_no J
where H.refNo = J.refId and J.refType = 'CSB' and J.appNo = acr_application.appNo), null)))))))))
from acr_application
In SQLServer 2000 I could easily debug a stored procedure from QA. But I dont know how to debug a sp in SQLServer 2005. I could find nothing to deal with it in SQL Server Management Studio. Can anybody tell me how to do it?
View 6 Replies View Relatedselect
acr_application.appNo as 'applicationNo',
acr_application.facilityName as 'nameOf DrugTesting',
acr_application.adr as 'address',
acr_reference_no.refNo as 'referenceNo',
ref_charge.chargeDesc as 'charges/fee',
acr_reference_no.amount as 'amount',
ref_settings.earlyFileDiscnt as 'pdiscount',
((ref_settings.earlyFileDiscnt / 100) * acr_reference_no.amount) as 'discount',
case when acr_reference_no.earlyFileDiscntDt is not null then acr_reference_no.earlyFileDiscntDt
else
case when '2007-09-29' <= ref_facility.validToDt then date_sub(ref_facility.validToDt, interval (ref_settings.earlyFileDiscntValid + 1) day)
end
end as 'discountValidity',
ref_settings.lateFileDiscnt as 'psurcharge',
((ref_settings.lateFileDiscnt / 100) * acr_reference_no.amount) as 'surcharge',
case when acr_reference_no.lateFileSurchargeDt is not null then acr_reference_no.lateFileSurchargeDt
else
case when '2007-09-29' <= ref_facility.validToDt then ref_facility.validToDt, select a.validTodt from acr_application a where a.appNo = (select max(b.appNo) from acr_application b where b.appNo < acr_application.appNo)
end
end
end as 'surchargeValidity',
'0012 2222 20' as 'accountNumber',
concat('DOH-',acr_reference_no.refNo, '','-85619') as 'accountName',
concat(if(acr_application.ownerTitle is null or acr_application.ownerTitle='','', concat(acr_application.ownerTitle, '')),
acr_application.ownerFname, ' ',
if(acr_application.ownerMname is null or acr_application.ownerMname='','', concat(substr(acr_application.ownerMname,1,1),'.', ' ')),
acr_application.ownerLname, '', '',
if(acr_application.ownerSuffix is null or acr_application.ownerSuffix='','', concat(' ', acr_application.ownerSuffix))) as 'nameOfRepresentative'
case when acr_application.appType = 'INA' then acr_reference_no.amount
else
case when acr_application.appType = 'RNW' then
(if(acr_reference_no.earlyFileDiscnt is not null
and acr_reference_no.earlyFileDiscnt <='2007-09-29',
acr_reference_no.amount + (acr_reference_no.amount * (ref_settings.earlyFileDiscnt / 100))))
else
case when acr_reference_no.earlyFileDiscntDt is not null
and acr_reference.earlyFileDiscntDt > '2007-09-29'
and '2007-09-29' <= ref_facility.validToFt
then acr_reference_no.amount, acr_reference_no.amount + (acr_reference_no.amount * (ref_settings.earlyFileDiscnt / 100))
end
end
end as 'totalCashDeposit',
case when acr_application.appType = 'INA' then date_add(acr_applicationappDt, interval ref_settings.validityAfterAppDayy)
else
case when acr_application.appType = 'RNW' then acr_reference_no.earlyFileDiscntDt
else
case when acr_reference_no.earlyFileDiscntDt is not null and acr_reference_no.earlyFileDiscntDt > '2007-09-29' and '2007-09-29' <= ref_facility.validToDt then ref_facility.validToDt, date_add(ref_facility.validToDt, interval ref_settings.validityAfterAppDay)
end
end
end as 'bankValidity'
from acr_application
left join ref_facility on acr_application.appNo = ref_facility.appNo
left join ref_settings on ref_settings.service = acr_application.service and
ref_settings.ownType = acr_application.ownType and
ref_settings.facilityType = acr_application.facilityType and
ref_settings.institutChar = acr_application.institutChar
left join (acr_reference_no left join ref_charge on acr_reference_no.chargeId = ref_charge.chargeId and acr_reference_no.paid <> 'Y')
on acr_application.appNo = acr_reference_no.appNo
My colleagues and I have not been able to successfully set up SQL debugging on a SQL 2000 instance running on Windows 2000.Is there a checklist posted somewhere? We have verified that the SQL Server is not running with System Account Credentials. It runs as a Domain Administrator. We have also verified that everyone has permission to run sp_sdidebug. Does it matter that the Win2K machine is a Domain Controller? Any help would be appreciated.
View 1 Replies View RelatedHi -
I am new to SSIS but not new to ETL. Is there a way in debugger to debug but not actually update the target table ? In other tools I€™ve used, there was an option setting to not allow update/inserts into the actual table, but would provide a visual dataset so you could see & test with. I haven€™t been able to find this feature in SSIS & was wondering if there is a way to do this.
Thanks -
Is there a way to step through sql when designing a query the way you can step through VB code in the IDE?
View 3 Replies View RelatedHi, I am new here.
I tried to debug stored procedures in the Visual Studio and you know… it was a real shock. Like going in time 10 or 20 years back.
The stored procedures I deal with contain a lot of @tab and #tab, but it appears that I can not evaluate the values of these objects! The only type of object I can evaluate is a variable. But SQL is designed for the table data, right? So the most important type of data is not accessible!
How can I understand, what records have been affected by Update or inserted by Insert? Using prints or debug selects? Is it an era of FORTRAN or ALGOL???
To make it worse, to enter a debugger, I need to provide values of all parameters. It might be simple for the outermost procedure, but for inner stored procs, and where some parameters are some short-living identity values of some records, created in a transaction, it is very difficult to prepare all conditions to make a correct run.
So my question is, may be I had overlooked something? Is it a real debugger or just a joke from Microsoft? Sorry, but I am really angry after wasting a lot of time last week on it.
Does anyone know of any good debugging tools for transact sql? I know there is one by compuware called dbpartner but was looking for other options.
Thanks,
Eddie
I have a script that works in works in Query Analyzer, but when I try to put it in a DTS package, it fails. I have the database set properly in the data source. Can someone give me direction to figure out what is going on?
Brian
I'm looking for leads on any T-SQL / Trigger / Procedure editing and debugging tools for MSSQL 6.5 .
Any and all information would be appreciated.
Thanks in advance
Paul Gaynor
Hello,
I'm kind of new to SQL Server 2000, I've heard about debugging tools in Query Analyser
where can I find this tools?
Thanks
I was wondering if it is possible to pop up a dialog box from a SQL trigger.
This would be a great way to debug triggers as you could report variable values in the dialog box.
If not, does anybody have any suggestions as to the best way of reporting out variable values whilst a trigger is running?
From this msg im guessing that SQLE.DLL nee to be installed on my SQLServer box, is that correct? Where would i find this dll?
Server: Msg 508, Level 16, State 1, Procedure sp_sdidebug, Line 1
[Microsoft][ODBC SQL Server Driver][SQL Server]Unable to connect to debugger on APOLLO-ClintonSQL (Error = 0x800401f3). Ensure that client-side components, such as SQLLE.DLL, are installed and registered on PUR-CO-Clinton2. Debugging disabled for connection 59.
Ok, I am aware of the process to debug a stored proc for SQL 2005. I have never done anything in the Visual Studios 2005 so have had no reason to have it but now that I am pretty much forced into using SQL 2005, I have been deprived of the easy system of debugging stored procs from query analyzer. My question is...with the Visual Studios 2005 that was included with the SQL 2005 install, why does it not allow me to debug? I am aware of the whole Pro, Standard, etc of VS, but why not offer any way to debug? Am I missing something here? What options do I have to debug a stored proc other than running it over and over and over and over again to pinpoint an issue without getting VS2005 Pro or something?
View 4 Replies View RelatedAfter writing a Stored Procedure(which is giving correct reasult) how can I go for optimizing it?Is there any tool to debug a stored procedure?
View 1 Replies View RelatedI have been trying to debug a simple CLR function in VS2008 without any luck. I have searched Google and gone through several walk throughs without any luck. The function builds, deploys, and works from SQL fine but I cannot debug in VS. I created a new SQL login for a new user with SysAdmin privileges, and even set the permission level to "unsafe". Still, no debugging. The results in the output window of VS is "Canceled by user". I feel like this may be a permissions issue but I'm not sure. Can someone point me in the right direction to correct this? I use to debug CLR stored procs at another place of employment using VS all the time. Unfortunately, I wasn't involved with configuring it.
View 1 Replies View RelatedGreetings: I have a question about debugging or stepping through DTSpackage Active X scripts. When I hit a bug Microsoft DevelopmentEnvironment pops up the script and highlights where the error occurred.I can use the Immediate pane to find out the values in the variables,but I can't set breakpoints or step through or out of or back into thescript or even change it. Is this possible? I am having troublefinding references to this. I appreciate any help.Thanks!--Rowan
View 1 Replies View RelatedI am an old guy that comes from the large IBM 370 generation, at that timewas very easy for me to debug programs using cedf tool., even if theprogram was object code with this tool you were able to intercept CICScommands and sql commands.I have a delphy application., only object code., that has access to a sqlserver.., what tool may I use to intercept the sql commands released fromthis application ?? I know this is not a particular question regarding mssql server, but for sure you guys knows a lot more than me about thisenvironment.RegardsJCortes.
View 1 Replies View RelatedHi,
I didn't play around with breakpoints to much, yet. So today I created a package with 2 variables, which both raise their change event. I added a event handler for that just to show the name of the variable which initiated that event (system::variablename) in a messagebox. I added two scripts to the main workflow, one changes one variable, one the other.
To see what's happening I placed a breakpoint on the script in the event handler. I start the package, the first script is executed, the event is fired and the script is started. The breakpoint stops executing the package. So good so far. When I now click on "continue" the script task in the event handler changes to "yellow" and I hear a beep. That's all. I don't see any other action in the package, the second script is not started and the run seams to be locked.
What's wrong? Is the problem sitting in front of the monitor? Am I the 1000th person hitting that bug?
Thanks,
Hi All,
Could you please help me?
I have a problem with T-SQL stored procedure, which call the CLR Stored Procedure, and when it runs into it my Visual Studio gets berserk, looping like crazy, eating 100% CPU and gobling off more and more memory. The Visual Studio out into the the Output window the following message over and over again:
WARNING: Debugger was accessing T-SQL variables while managed code was not suspended. Waiting until the access is done to continue T-SQL execution.Continueing T-SQL execution.
WARNING: Debugger was accessing T-SQL variables while managed code was not suspended. Waiting until the access is done to continue T-SQL execution.Continueing T-SQL execution.
The only way to stop it is by killing the Visual Studio process. Then I have to stop, or sometimes even kill the SQL server to bring the CPU down from 100%.
What should I do to avoid this problem? Thank you very much for the help.
I've added some breakpoints to a script task. When I right click and execute the task the breakpoints are honored but there's nothing in the call stack, autos, or locals windows and I'm not able to add variables to the watch list. Is there something that I need to enable?
thanks
Peter
Does anyone now the minimum permissions to debug SQLCLR. I have a friend trying to develop as a non-admin and he finds that it doesn't work even if he launches Visual Studio to run as an admin account.
Is it possible? Are there certain rights required?
I apologize for coming into this old thread. I'm having a serious problem with the UpdateLastActivity date method from this class on our site. First of all, do you know when and how that code is being called? I suppose it's automatically called from the Login control, but I was unable to trace it down so far.
The problem I discovered is that instead of updating just one particular user information (the currently logged user) all users with the same SiteID (profile property) get updated. The procedure is getting called repeatedly, but how can I find out what is calling it from the VS 2005?
I didn't know about Messagebox.Show method - would it work in ASP.NET?
Can you please help me with this problem? BTW, I found this thread when I was searching for UpdateLastActivityDate within MS website.
I also posted this question on ASP.NET forums.
Thanks in advance.
I have run into a weird issue, and am not sure what's going on. I have a simple clr scalar function that I am trying to debug. Every time I try to step into it, I hit the first breakpoint (which is the first line of the function), and as soon as I hit F5/F11, the debugger exits with the following message:
.NET Framework execution was aborted. Another query caused the AppDomain "DBNAME".dbo[runtime].45 to be unloaded or an unhandled .NET exception happened.
Can please someone try and shed some light on this? Thanks. I am using the VS2005 Pro with SQL Server 2005 Developer Edition.
I have a script task in SSIS package. I want to debug the code . but even after setting break points control does not go through the code. So am using msgbox for debuggin purpose ( but its really painfull) can anybody guide me on this.
Thanks,
Prash
I am working in SQL Server Reporting Services, and I have an error using a dynamic parameter. The error surfaces during runtime. I believe I could fix the parameter if I knew exactly what the resulting SQL statement looks like. So the question is: how do I view the actual SQL statement that is being executed in a report? I tried SQL Profiler, which shows how my parameter drop-down lists are being populated, but it does not show the main dataset SQL statement.
Alternatively, are there any examples of using a dynamic parameter that is a "datetime" data type?
Any help would be appreciated. Thanks.
The following issue is happening a lot these days. For all the world it looks like a bug in BIDS:
I set a breakpoint in a Script Task (not a Script Component!) and the code dutifully stops on the breakpoint over and over again, as expected. (Please don't tell me about not being able to debug Script Components!)
At some point, when I run the package and hit the Script Task, the VSA editor opens as if it's going to take me to the breakpoint, but then it displays an error dialog box containing the following message:
Microsoft Visual Studio has lost its link to .
You work will be exported to C:Documents and SettingsmgrohMy Documents when you quit the application
(Notice the space between "its link to" and the period in the first statement. It goes without saying that nothing is exported to My Documents.)
When I dismiss the dialog, execution resumes and the break point is ignored. In fact, breakpoints in all script tasks in the project are ignored.
Clearly, something is broken in the DTSX file, and is preventing VSA from finding the breakpoint. That's the only interpretation I can come up with for the "lost its link to" part of the message.
I have tried everything I can think of:
- Deleting all breakpoints and re-establishing the breakpoint
- Making a small change to the code to force VSA to re-evaluate the module
- Shutting down and re-opening the project
- Rebooting the computer (!!!!)
And NOTHING works. The module is just broken, and breakpoints it other Script Tasks don't work, either.
This really looks like a bug in SSIS, but I can't find anyone else who's complained of the same thing.
Any ideas? TIA!
- Mike