I am hoping this is a quick easy question for someone! :)
I am trying (struggling) with moving data from Sql Server to a Lotus
Notes table.
I am using SQL Server 2000, I have a Lotus Notes linked server (using
NotesSQL), and I wasnt to clear the table (delete all records) and then
reload it from my data on SQL Server.
What is the syntax to delete the records?
My select statement would be like this:
select * from openquery([LinkedServer], 'select * from NotesTable')
where lastName='Smith'
My delete statement ??? -- cant quite figure out the syntax of this
one....
select * from openquery([LinkedServer], 'delete from NotesTable') where
lastName='Smith'
(this doesnt work)
I'm trying to clean up a database design and I'm in a situation to where two tables need a FK but since it didn't exist before there are orphaned records.
Tables are:
Brokers and it's PK is BID
The 2nd table is Broker_Rates which also has a BID table.
I'm trying to figure out a t-sql statement that will parse through all the recrods in the Broker_Rates table and delete the record if there isn't a match for the BID record in the brokers table.
I know this isn't correct syntax but should hopefully clear up what I'm asking
Hello,I have successfully linked a Lotus Notes server to our SQL Serverdatabase using an ODBC connection.This works fine when wanting to select recordseg openquery(LOTUSNOTES2, 'select * from Person' )The problem I have is when I try to update the record I get an erroregupdate openquery(LOTUSNOTES, 'select * from Person whereMailAddress=''nick.bloor@sandh-ltd.com''' )set JobTitle='Test'Produces the following error==========OLE DB provider 'MSDASQL' reported an error. The provider did not giveany information about the error.OLE DB error trace [OLE/DB Provider 'MSDASQL' IRowset::GetNextRowsreturned 0x80004005: The provider did not give any information aboutthe error.].===========I have tested the ODBC connection using an Access database. The linktables facilities enable me to select what I think should be theprimary key. If I select a primary key then I can use Access to updatethe lotus notes database, however if I don'k select a primary key, thetable is not updateable.I believe that if I can somehow create an index on the linked tablewithin SQL Server, I should be able to update the Lotus Notes databasefrom SQL Server, but I cannot find a way of doing so.As the Lotus Notes software is third party, I cannot actually changeanything on that server.Thanks for any help.RegardsNick Bloor
I'm having a few issues trying to get a linked server setup from a new SQL2012 installation to a Lotus Notes database. This linked server has previously been working fine on our old SQL2005 environment. All setup using the same details (ODBC driver name matches, account details etc). If we test the connection from the Lotus ODBC driver the test connection is successful, If I then create the Linked server to access this ODBC driver I receive an error :
Cannot initialize the data source object OLE DB Provider "MSDASQL" for linked server "LotusTest"
OLE DB provider "MSDASQL" for linked server "LotusTest" returned message "[Microsoft][ODBC Driver Manager] Driver's SQLSetAttr failed" OLE DB provider "MSDASQL" for linked server "LotusTest" returned message "[Lotus][ODBC Lotus Notes]
Unable to find path to server. check your network connection is working.(Microsoft SQL Server, Error: 7303)We have just migrated to a SQL Server 2012 64 bit Enterprise from SQL Server 2005 32 bit Standard. We have a 64 bit Lotus client installed to provide the correct ODBC driver which has enabled the test connection direct from the ODBC driver to connect successfully. I'm just at a loss as to how to resolve this issue and get the linked server connecting.
I'm using the following syntax to extract a list of all the table names on a linked server:
EXEC sp_tables_ex @table_server = MY_SERVER_NAME
It outputs a list of tables into 4 columns in the result window.Is there a way an can use this as a 'SELECT * FROM ... " command so that I can organize records, insert into, etc etc ?
there are two tables involve in replication let say table1 and replicated table is also rep.table1.
we are not deleting records physically in table1 so only a bit in table1 has true when u want to delete a record but the strange thing is that replication agaent report that this is hard delete operation on table1 so download and report hard delete operation and delete the record in replicated table which is very crucial.
plz let me know where am i wrong and how i put it into right way.
there is no triggers on published tables and noother trigger is created on published table.
I have a table with the following columns,NAME, TYPE, TAGAnd there may be 'duplicates' on name and type.How can I delete them??I want to delete all with duplicate NAME and TYPE
ID LastContact 1a 4/12/2003 2d 5/12/2004 1a 9/12/2006 3c 6/12/2005
...and so on
I need to clean up this table so that I have one unique ID, with the latest 'Last Contact' date....so for this example, after the delete query I would only have '1a' with the '9/12/2006' LastContact colum..and the other two rows would be unaffected, since they didnt have a duplicate id..so after the delete query, my table would look like this;
ID LastContact 2d 5/12/2004 1a 9/12/2006 3c 6/12/2005
How would I write such a query...some sort of grouping ?
Hello I am trying to delete multiple rows in my sql 2000 database, I have used the following sysntax but I keep getting errors: DELETE From NameList WHERE LName = 'Smith';and LName = 'Jones';and LName = 'Peters';and LName = 'Adams';and LName = 'Conner';and LName = 'Simon'; I have tried editing the syntax in a variety of ways, but I just can't find the correct solution. I have Googled and so far not found another syntax format. What am I doing wrong. Thanks. Lynn
I have the following SELECT query, the results of which I would deletefrom the table they're pulled from:SELECT A.* FROM SalesOrderPartPrices AWHERE EXISTS(SELECT 'Exists' FROM SalesOrderPartPrices BWHERE(A.SalesOrderNo = B.SalesOrderNo) AND(A.PartNo = B.PartNo) AND(A.UnitPrice = B.UnitPrice) AND(A.RowID > B.RowID))However, when I try to run the following query, I get an error ("Msg170, Level 15, State 1, Line 1: Incorrect syntax near 'A'."):DELETE FROM SalesOrderPartPrices AWHERE EXISTS(SELECT 'Exists' FROM SalesOrderPartPrices BWHERE(A.SalesOrderNo = B.SalesOrderNo) AND(A.PartNo = B.PartNo) AND(A.UnitPrice = B.UnitPrice) AND(A.RowID > B.RowID))What am I doing wrong, and how do I resolve the issue? Any help isgreatly appreciated....... thanks in advance!-=Tek Boy=-
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out How i can fetch the lotus notes data in my asp.net pages.
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out How i can fetch the lotus notes data in my asp.net pages.
Hello I need to be able to regularly, update or delete data from my parent table and subsequent child tables from A to Z, each table contains data. However, I have having problems. I have already created the tables with primary keys on each table and foreign keys linking each table to the next. I tried to delete a row from the parent table and was given this error: DELETE FROM [dbo].[DomNam]WHERE [DomNam]=N' football ' Error: Query(1/1) DELETE statement conflicted with COLUMN REFERENCE constraint 'FK_DomNam'. The conflict occurred in database 'DomDB', table 'Dom_CatA', column 'DomNam'.
I tried to insert an alter table query: ALTER TABLE dbo.DomNamADD CONSTRAINT FK_Dom_ID REFERENCES dbo.Dom_CatA (Dom_ID) ON DELETE CASCADE ON UPDATE CASCADE But on Execute I saw this error: Error] Incorrect syntax for definition of the 'TABLE' constraint What is wrong with the above syntax? Or would it be better if I used a trigger instead because I already have foreign keys set within the tables?If so please give an example of the syntax for the trigger I would need to update and cascade data from all tables. I would be grateful for any advice. Thanks.
Hii want to delete a row in my database but the problem is, i cant delete it as other table rows is linked to it. I have to delete all the rows thats linked to the row i wanna delete first.Is there a easier way to delete the row and all the rows thats linked to it? i wanna code it to do it.an suggestions?
I am trying to delete records in a file on the AS400 using a linked server and I am getting the following error message:
Server: Msg 7345, Level 16, State 1, Line 1 OLE DB provider 'MSDASQL' could not delete from table '"catalog"."schema"."table"'. There was a recoverable, provider-specific error, such as an RPC failure. ODBC: Msg 0, Level 19, State 1 SqlDumpExceptionHandler: Process 58 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process. [OLE/DB provider returned message: Multiple-step operation generated errors. Check each status value.] OLE DB error trace [OLE/DB Provider 'MSDASQL' IRowsetChange::DeleteRows returned 0x80040e21: DBROWSTATUS_E_FAIL].
The linked server is configured as follows: "server type": other data source "provider name": Microsoft OLE DB provider for ODBC drivers "data source" references a system DSN name that uses the driver "Client Access ODBC driver(32 bit)" linked server options: "Data access" and "Use remote collation" boxes checked provider options: "Dynamic parameters", "Nested queries", "Allow in process", "Non transacted updates" boxes checked
The file on the AS400 is journaled and has a unique key.
The Select and Insert statements work like a charm but I can not for the life of me get the Delete or Update statements to work.
I have been struggling with this problem for over a month, so any help whatsoever would be tremendously appreciated.
I have a procedure on SQLSERVER DB1 where i insert into few tables on SQL SERVER DB1 and delete a table on remote server SQL SERVER DB2 via linked server. Unfortunately, the delete is taking for ever. Procedure never completes. Data in that table is close to 500 records.
I have delete statement like Exec(delete linkserv.onedb.stg.tab1)
Later i modified the delete query as below but no luck
DELETE OPENQUERY(linkserv, 'Select * from onedb.stg.tab1')
What can i do here to get this fixed? Please see linked server properties below Enable promotion of distributed transactions for RPC:True Use Remote Collation: True All other properties : False
How can i debug my SQL Server procedure and find the issue. I came to know that i do not have permission to use debug feature on SSMS.
I am getting time-out errors when I try to perform a simple delete on alinked server. The command is:Delete From MyTable Where PKID=12345I have tried executing this command directly from Query Analyzer, but itjust times out. However, when I run it from QA against the server itself(rather than from my local server against a linked server), it executesimmediately. Similarly, if I run the same SQL command through an ODBC linkedtable in an Access 2000 MDB file (tweaking the syntax slightly), it alsoexecutes immediately. Only if I run it from SQL 7 as a stored procedure or aQA command against a linked server does it time-out.I have no problems inserting rows using any of the three methods notedabove. It is only with deleting rows through the linked server that it timesout.Thanks for any assistance.Neil
Background: Am working on completing an ORM that can not only handles CRUD actions -- but that can also updates the structure of a table transparently when the class defs change. Reason for this is that I can't get the SQL scripts that would work for updating a software on SqlServer to be portable to other DBMS systems. Doing it by code, rather than SQL batch has a chance of making cross-platform, updateable, software...
Anyway, because it needs to be cross-DBMS capable, the constraints are that the system used must work for the lowest common denominator....ie, a 'recipe' of steps that will work on all DBMS's.
The Problem: There might be simpler ways to do this with SqlServer (all ears :-) - just in case I can't make it cross platform right now) but, with simplistic DBMS's (SqlLite, etc) there is no way to ALTER table once formed: one has to COPY the Table to a new TMP name, adding a Column in the process, then delete the original, then rename the TMP to the original name.
This appears possible in SqlServer too --...as long as there are no CASCADE operations. Truncate table doesn't seem to be the solution, nor drop, as they all seem to trigger a Cascade delete in the Foreign Table.
So -- please correct me if I am wrong here -- it appears that the operations would be along the lines of: a) Remove the Foreign Key references b) Copy the table structure, and make a new temp table, adding the column c) Copy the data over d) Add the FK relations, that used to be in the first table, to the new table e) Delete the original f) Done?
The questions are: a) How does one alter a table to REMOVE the Foreign Key References part, if it has no 'name'. b) Anyone know of a good clean way to get, and save these constraints to reapply them to the new table. Hopefully with some cross platform ADO.NET solution? GetSchema etc appears to me to be very dbms dependant? c) ANY and all tips on things I might run into later that I have not mentioned, are also greatly appreciated.
Hi all, We are retriving tables from DB2 and loading into a SQL server. while retriving temporary tables are getting created in the linked server. we need to delete the data in those temporary tables in Linked server. I don't know how to write delete statement for the tables in linked server. any pointers would be appreciated.
I am planning to delete a login from SQL logins because he moved out from project .when i try to delete the login , it throws an error saying " The server principal owns an endpoint and cannot be dropped , error 15141 "
Same problem facing on different servers.
Note : Environment is SQL 2012,SQL 2008 including cluster servers .
The requirement is: I should allow single row delete from a table but not bulk delete. An audit table should get updated if there is any single delete or single update. So I wrote the triggers as follows: for single and bulk delete
ALTER TRIGGER [dbo].[TRG_Delete_Bulk_tbl_attendance] ON [dbo].[tbl_attendance] AFTER DELETE AS
[code]...
When I try to run the website, the database error I am getting is:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 0, current count = 1.
I am using SQL Server 2005 and trying to create a linked server on Oracle 10. I used the commands below: EXEC sp_addlinkedserver @server = 'test1', @srvproduct = 'Oracle', @provider = 'MSDAORA', @datasrc = 'testsource' exec sp_addlinkedsrvlogin @rmtsrvname = 'test1', @useself = 'false', @rmtuser='sp', @rmtpassword='sp'
When I execute select * from test1...COUNTRY I get the error. "The OLE DB provider "MSDAORA" for linked server "...." does not contain the table "COUNTRY". The table either does not exist or the current user does not have permissions on that table." The 'sp' user I am connecting is the owner of the table. What could be the problem ? Thanks a lot.
I have two tables that are related by keys. For instance,Table employee {last_name char(40) not null,first_name char(40) not null,department_name char(40) not null,age int not null,...}Employee table has a primary key (combination of last_name and first_name).Table address {last_name char(40) not null,first_name char(40) not null,street char(200) not null,city char(100) not null,...}Address table has a primary key (combination of last_name, first_name andstreet in which (last_name, first_name) reference (last_name, first_name) inemployee table.Now I want to delete some rows in Address table based on department_name inEmployee table. What is sql for this delete?I appreciate your help. Please ignore table design and I just use it for myproblem illustration.Jim
Strange one here - I am posting this in both SQL Server and Access forums
Access is telling me it can't append any of the records due to a key violation.
The query:
INSERT INTO dbo_Colors ( NameColorID, Application, Red, Green, Blue ) SELECT Colors_Access.NameColorID, Colors_Access.Application, Colors_Access.Red, Colors_Access.Green, Colors_Access.Blue FROM Colors_Access;
Colors_Access is linked from another MDB and dbo_Colors is linked from SQL Server 2000.
There are no indexes or foreign contraints on the SQL table. I have no relationships on the dbo_ table in my MDB. The query works if I append to another Access table. The datatypes all match between the two tables though the dbo_ tables has two additional fields not refrenced in the query.
I can manually append the records using cut and paste with no problems.
I have two tables that share a common identity row. I need to build a query where data that exists in one table does not contain data in the other table. For example, table 1 has columns of Owner_ID, LastName, FirstName and table 2 has columns Auto_ID, Owner_ID, AutoMake. Both tables are joined by the Owner_ID column. I need a query that provides all owners from table 1 who do not have an entry in table 2.
I need to delete records from a table (Table1) which has a foreign key column in a related table (Table2).
Table1 columns are: table1Id; Name. Table2 columns include Table2.table1Id which is the foreign key to Table1.
What is the syntax to delete records from Table1 using Table1.Name='some name' and remove any records in Table2 that have Table2.table1Id equal to Table1.table1Id?
I have contract table which has built in foreign key constrains. How can I alter this table for delete/ update cascade without recreating the table so whenever studentId/ contactId is modified, the change is effected to the contract table.
Thanks
************************************************** ****** Contract table DDL is
create table contract( contractNum int identity(1,1) primary key, contractDate smalldatetime not null, tuition money not null, studentId char(4) not null foreign key references student (studentId), contactId int not null foreign key references contact (contactId) );
I have one table that has unique id's associated with each row of information. I want to delete rows of information in one table that have a unique ID that references information in another table.
Here is a basic breakdown of what I am trying to do:
Table1 (the table where the rows need to be deleted from) Column_x (Holds the id that is unique to the various rows of data - User ID)
Table2 (Holds the user information & has the associated ID) Column_z (holds the User ID)
I tried this on a test set of tables and could not get it to work. What I am trying to do is skip all rows of Table1 that have ID's present in Table2, and delete the rows of ID's that are not present in Table2.
Code:
SELECT Column_z FROM dbo.Table2 DELETE FROM dbo.Table1 WHERE Column_z <> Column_x
This did not seem to do what I needed, it did not delete any rows at all.
I wanted it to delete all rows in Table1 that did not have a reference to a user ID that matched any ID's in Column_z of Table2
Then I tried another scenerio that I also needed to do:
Code:
SELECT Column_z, Column_a FROM dbo.Table2 DELETE FROM dbo.Table1 WHERE Column_z = Column_x AND Column_a='0'
'0' being the user id is inactive so I wanted to delete rows in Table1 and remove all references to users that were in an inactive status in Table2.
Neither one of the Queries wanted to work for me in the Query Analyzer when I ran them. It just said (0) rows affected.
with actividades_secundarias as ( select a.*, r.Antigo, r.Novo, rn = row_number() over (PARTITION BY a.nif_antigo, r.novo ORDER BY a.nif_antigo) from ACT_SECUNDARIAS a inner join ((select
[Code] ....
I want to make a delete statement like this:
select * into #table1 from actvidades_secundarias where rn>1 Delete from act_secundarias where act_secundarias.nif_antigo = #table1.nif_antigo and act_secundarias.cod_cae = #table1.cod_cae
