Before I start just wanna say thanks for all the top advice so far - much appreciated. My current quandry is this:-
I have a table called STOCK with columns ITEM_ID, ITEM & PRICE. Most of the stock is my own produce but i do buy-in some items. What i want to do is add some extra columns to STOCK for the supplier details on those items i buy in. The problem is that a lot of the fields in the supplier details columns will be empty. Would this be a problem or would it be better to have a seperate table for supplier details?
I need to be able to add an extra column to my matrix - I've searched high and low on the net and I cant seem to find the answer anywhere.
I have grouped data which displays as it should and I can get the SubTotal part for my Dailys to run - I need to add a total for MTD and YTD (which is a part of the SQL Data) after the subtotal - is there a straight forward way of doing this?
This is an example of how I want my report to look (I can already achieve the bits highlighted bold)
Daily Data
Commission (GroupData cell 1) Interest (GroupData CELL 2) GroupData etc €¦ SUBTOTAL (DTD) MTD TOTAL YTD TOTAL
Book Currency =sum(Fields!DTD.VALUE)
........
=sum(Fields!MTD.VALUE) =sum(Fields!YTD.VALUE)
and this is an example of the data being returned by my Sproc
Book CCY GroupedData DTD MTD YTD
ABC GBP Commission £0.01 £0.09 -£0.10
ABC GBP Interest £0.02 £0.29 £0.11
ABC GBP Brokerage £0.12 £0.06 £0.20
When I use the "Add Column" functionality - I get a repeat of the MTD and YTD under each of the groupData cells - where as i only need it as a summary after the subtotal.
Daily Data
Grouped Data CELL 1 Grouped Data CELL 2
Book Name Currency DTD TOTAL MTD TOTAL YTD TOTAL DTD TOTAL MTD TOTAL YTD TOTAL
I've read a MSDN article on enhancing error outputs with a script component. This solution added the script component astride the error output, and it was able to add a column with the error description text.
I would like to do something a little different. I'd like to add information from my custom component. When the component causes an error, it generally "knows why" - it has available to it the information that made it decide there was an error. I'd like to include that information in error outputs, but I haven't seen a way to do that.
Is this even possible using the error output directly? I could abandon error outputs and use Conditional Split, along with an "iserror" column plus my extra columns, but I'd prefer not to do that.
I have a view that is using UNION ALL to combine common fields of two tables, this is my statement:
SELECT ID, STATUS, ACTIVE_STATUS, NS_PARENT_CHANGE_NUM, NS_REP, NS_CHANGE_NUM, NS_CHANGE_IDENTIFER FROM dbo.CT_FRAME_T
UNION ALL
SELECT ID, STATUS, ACTIVE_STATUS, NS_PARENT_CHANGE_NUM, NS_REP, NS_CHANGE_NUM, NS_CHANGE_IDENTIFER FROM dbo.CT_ATM_T
This works fine, but I would also like some fields that do not match to appear in the view. It is OK if the value is null for the rows of data from the other table that doesn't have the columns.
The other columns are called DLCI from CT_FRAME_T and then VPI, VCI from CT_ATM_T.
My view would then return ID, STATUS, ACTIVE_STATUS, NS_PARENT_CHANGE_NUM, NS_REP, NS_CHANGE_NUM, NS_CHANGE_IDENTIFER, DLCI (where applicable), VPI and VCI (where applicable). Is this possible?
Hi all, please help. I m trying to create an "empty" table from existing table for the audit trigger purpose. For now, i am trying to create an empty audit table for every table in a database named "pubs", and it's seem won't work. Please advise.. Thanks in advance.
SELECT @TABLE_NAME= MIN(TABLE_NAME) FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_TYPE= 'BASE TABLE' AND TABLE_NAME NOT LIKE 'audit%' AND TABLE_NAME!= 'sysdiagrams' AND TABLE_NAME!= 'Audit' AND TABLE_NAME = 'sales'
WHILE @TABLE_NAME IS NOT NULL BEGIN
SELECT @TABLE_NAME= MIN(TABLE_NAME) FROM INFORMATION_SCHEMA.Tables WHERE TABLE_NAME> @TABLE_NAME AND TABLE_NAME = 'sales'
SELECT @TABLE_NAME= MIN(TABLE_NAME) FROM INFORMATION_SCHEMA.Tables WHERE TABLE_NAME> @TABLE_NAME AND TABLE_TYPE= 'BASE TABLE' AND TABLE_NAME!= 'sysdiagrams' AND TABLE_NAME!= 'Audit' AND TABLE_NAME NOT LIKE 'audit%'
I have text file having three column like 300;Dev Fot;30097 400;Kit Mol;79684
now i have to insert this in DB with SSIS but at the same time I want another column insert in DB table with ID like 1;300;Dev Fot;30097 2;400;Kit Mol;79684
my table structure is Table_name (ID not null,EmpID not null;desc Not null;FinID Null)
Hi, I've got a table with trialsubscriptions. When someone orders a trialsubscription he has to fill in a form. With the values in the form I like to fill a database with some extra fields from the trialsubscription table. I get those extra fields with a datareader. But when I insert I can't use the same datareader (its an insert), I can't make two datareaders because I have to close the first one etc. Does someone had the same problem and has some example code (or make some :-)) Some keywords are also possible! Thanks! Roel
Hi all, please help. I m trying to create an "empty" table from existing table for the audit trigger purpose. For now, i am trying to create an empty audit table for every table in a database named "pubs", and it's seem won't work. Please advise.. Thanks in advance.
SELECT @TABLE_NAME= MIN(TABLE_NAME) FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_TYPE= 'BASE TABLE' AND TABLE_NAME NOT LIKE 'audit%' AND TABLE_NAME!= 'sysdiagrams' AND TABLE_NAME!= 'Audit' AND TABLE_NAME = 'sales'
WHILE @TABLE_NAME IS NOT NULL BEGIN
SELECT @TABLE_NAME= MIN(TABLE_NAME) FROM INFORMATION_SCHEMA.Tables WHERE TABLE_NAME> @TABLE_NAME AND TABLE_NAME = 'sales'
SELECT @TABLE_NAME= MIN(TABLE_NAME) FROM INFORMATION_SCHEMA.Tables WHERE TABLE_NAME> @TABLE_NAME AND TABLE_TYPE= 'BASE TABLE' AND TABLE_NAME!= 'sysdiagrams' AND TABLE_NAME!= 'Audit' AND TABLE_NAME NOT LIKE 'audit%'
I have two tables 1) tblCustomer (ID, Name, City) 2) tblemp (ID, NAME, Dept.ID, tblcustomer.ID) Both the tables have ID as PKA emp can be either assigned a) All customers b)single customer c) NO customer Pls note:- there will never be 2 or 3 customer linked to emp (my actuall requirement tables are different but to explain i am using the above tables) I know how to assign single customer......but had problem how to link all customers and "no customer" Please tell me if the following solution is right?1) I will manually insert a record in tblCustomer with id 0 as " all customers" and will not allow the user to delete it 2) store null in FK if it is "no customer" Also please tell me is it ok to store one more value in tblCustomer as -1 and take it as "No customer" I have a DDL in the Employee page which should be displaying the names of allthe customers with 2 extra values "ALL CUSTOMERS" and "SELECT" Select is the default value in DDL which says "NO CUSTOMER" selected yet Thank youSara
I am trying to insert an NTEXT value from one table T1 to another table T2 within a database. Table structures are as below;
Create table T1 (T1ID INT NOT NUll, SourceColumn Ntext null)
Create table T2 (T2ID INT NOT NUll, TargetColumn NVARCHAR(MAX) null)
Every time when long text value is getting inserted into T2.TargetColumn , it is appending with an unwanted character '?' either at the beginning or at the ending of the text string. Same problem happens even when I am trying to update T2.TargetColumn = T1.TextColumn. Because of this, the same column never matches to the source column and gets updated every time even there is no change...
I am also converting NTEXT column to NVARCHAR(MAX) and replacing CHAR(10) to '' .
I am using SQL Server 2012. How can I avoid inserting '?' in T2.TargetColumn . Is there any setting which I need to set in the target table?
I have a tab delimited file I need to transfer to a table using SSIS. Columns can have NULL value and there might be extra tabs in each row also. How can I do this? Maybe fuzzy lookup?
So I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:
In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID
I am trying to create a table such as shown below:
This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.
For e.g
Select Test_Name AS 'Test_Name', Table_Bird.Animal AS 'Birds', Table_Mammal.Animal AS 'Mammal', Table_Reptile.Animal AS 'Reptile, Table_Fish.Animal AS 'Fish' From Table_One
[Code] .....
The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.
Please note that the number columns are different in each table. I wanted to dump the data of Source table to Destination table. I meant to say that the rows of 2 columns in Source table to last 2 rows of Destination table. And also my oreder of the columns in Destination table will vary. So i need to a way to dynamically insert the data in bulk. but i will know the column names for sure before inserting.
Is there anyway to bulk insert into these columns.
I have a business need to create a report by query data from a MS SQL 2008 database and display the result to the users on a web page. The report initially has 6 columns of data and 2 out of 6 have JSON data so the users request to have those 2 JSON columns parse into 15 additional columns (first JSON column has 8 key/value pairs and the second JSON column has 7 key/value pairs). Here what I have done so far:
I found a table value function (fnSplitJson2) from this link [URL]. Using this function I can parse a column of JSON data into a table. So when I use the function above against the first column (with JSON data) in my query (with CROSS APPLY) I got the right data back the but I got 8 additional rows of each of the row in my table. The reason for this side effect is because the function returned a table of 8 row (8 key/value pairs) for each json string data that it parsed.
1. First question: How do I modify my current query (see below) so that for each row in my table i got back one row with 19 columns.
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.* FROM PRODUCT A CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B
If updated my query (see below)Â and call the function twice within the CROSS APPLY clause I got this error: "The multi-part identifier "A.ITEM6" could be be bound.
2. My second question: How to i get around this error?
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*, C.* FROM PRODUCT A CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B, Â fnSplitJson2(A.ITEM6,NULL) C
I am using Microsoft SQL Server 2008 R2 version. Windows 7 desktop.
Here is My requirement, I'm not sure if this is possible. Creating table called master like col1, col2 col3, col4 , col5 ...Where Col1, col2 are updatable - this can be done easily
Col3, col4 are columns in another table but these can be just a read only ?? Is this possible ? this is possible with View but not friendly with share point CRUD...Col 5 is a computed column of col 2 and col5 ? if above step can be done then sure this can be done I guess.
Hello,Using SQL Server 2000, I'm trying to put together a query that willtell me the following information about a view:The View NameThe names of the View's columnsThe names of the source tables used in the viewThe names of the columns that are used from the source tablesBorrowing code from the VIEW_COLUMN_USAGE view, I've got the codebelow, which gives me the View Name, Source Table Name, and SourceColumn Name. And I can easily enough get the View columns from thesyscolumns table. The problem is that I haven't figured out how tolink a source column name to a view column name. Any help would beappreciated.Garyselectv_obj.name as ViewName,t_obj.name as SourceTable,t_col.name as SourceColumnfromsysobjects t_obj,sysobjects v_obj,sysdepends dep,syscolumns t_colwherev_obj.xtype = 'V'and dep.id = v_obj.idand dep.depid = t_obj.idand t_obj.id = t_col.idand dep.depnumber = t_col.colidorder byv_obj.name,t_obj.name,t_col.name
I'm in the process of converting legacy DTS packages to SSIS. I need to populate a table that has more fields than the source file. In DTS I did this with an ActiveX script. How do I go about doing this within SSIS.
In the ActiveX script most of the fields were defaulted with either spaces or zeroes.
One of the Destination fields needs to be incremented by 1 for each new record inserted.
I just created a new table with over 100 Columns and I need to populated just the first 2 columns.
The first columns to populate is an identify column that is the primary key. The second column is a foreign_key to an other column and I am trying to populate this columns with all the values from the foreign_key value. This is what I am trying to do.
column1 = ID column2= P_CLIENT_D
SET IDENTITY_INSERT PIM1 ON
INSERT INTO PIM1 (P_CLIENT_ID) SELECT Client.ID FROMP_Client
So I am trying to insert both an identity values and a value from an other table while leaving the other columns blank. How do I go about doing this.
Hello,I have a query that I need help with.there are two tables...Product- ProductId- Property1- Property2- Property3PropertyType- PropertyTypeId- PropertyTypeThere many columns in (Product) that reverence 1 lookup table (PropertyType)In the table Product, the columns Property1, Property2, Property3 all contain a numerical value that references PropertyType.PropertyTypeIdHow do I select a Product so I get all rows from Product and also the PropertyType that corresponds to the Product.Property1, Product.Property2, and Product.Property3ProductId | Property1 | Property2 | Property3 | PropertyType1 | PropertyType2 | PropertyType3 PropertyType(1) = PropertyType for Property1PropertyType(2) = PropertyType for Property2PropertyType(3) = PropertyType for Property3I hope this makes sence.Thanks in advance.
I have two tables with the common column-name/ The first one include such columns as the name of football team, its country and budget. The second one include the team name, victories (quantity of it), lost games, and season. So I have the task to select such column as name, victories, lost games in 2nd table but only that ones that has budget over 1 mln? How to build select statement SELECT name, victories, lost g/ from TABLE2 WHERE budget >1000000 from TABLE1? Or should I equates the table1.name=table2.name??
Case: Exporting Report to PDF/Printing/TIFF Report: Contains 1 table with 19 Columns. 1 column is static, the other 18 are visible at the users descretion. Report when printed/exported to pdf spans 2 pages naturally, 16 on the first page, 3 on the second, and the column widths have been adjusted to provide a perfect page span .
User A elects to hide two of the columns, and show the rest. The report complies and the viewable version is perfect, the excel export is perfect.. the PDF export on the first page causes every fith column, starting with the last column that was hidden to be expanded to take up additional width. On the spanned page, it renders the first column on that page correctly, then there is a white space gap equal to the width of the hidden columns and then the rest of the cells show with the last column expanded to take up the same width that the original 2 columns were going to take up, plus its width.
We have tried several different settings to see if it helps this issue or makes it worse. So far cangrow/canshrink/keep together have made no impact. It is not possible to increase the page size due to limited page size selection availablility for the client. There are far too many combinations of what the user can elect to show or hide to put together different tables to show and hide on the same report to remove this effect.
Any help or suggestion on this issue would be appreciated
HI When I'v click in Visual Web Developer 2008 to build web site it has made a new MDB file name ASPNETDB. MDF So now I have 2 mdb file (MyFileName.mdf and ASPNETDB. MDF) What is that extra (ASPNETDB. MDF) file and do I need it and why? Thanks assaf
I used excel to import data to my database, I found out a problem, my program is linked with the database, when the program show data from the database, it has an extra '@' symbol, In order to remove it, I need to go to the database to press space bar and backspace at the field. How could I use SQL instead of using space bar and backspace?
select classid, count(*) as [COUNT], dtmready from unit where rmpropid = '123' and classid = 'A1' group by rmpropid, classid, dtmready order by dtmready;
If you notice, the earliest dtmready is 7/1/2006. What I need is to return an additional row when the earliest dtmready is after today. The desired row would be:
A1 0 (today's date)
Background: I am running SQL Server 2000 SP4 and the results of the query are returned to a java program at a level where I do not have the ability to create a new row. So, it would be ideal if I could create the sql that returns a row with a dtmready of today with a count of 0.
I have a strange SQL statement Select * from TableName WH
Basicly I have a code that creates a Dynamic SQL statement in this case I thought that I will get an error on the above statement but infact I did not I tested it on the Enterprise Manager and it works fine I changed the WH to WHER it works as long as its not a reserved word so if I put my name or what ever after that sql it still works unless I use two words with a space between them it will give an error on the second one not the first
Can anyone tell me why is that I do not know if its a feature or what
Our company wants to run web based application in folowing way.
Browser --> WebServer -->Sql Server
Sql server is part part of corporation domain and has about 25 more databases
Should we dedicate extra SQL server to run Web apps , or it would be safe to run web apps on corporation Sql Server? or If any one can point on links on this subject?. Thank you
I have some fields in my database that are char(50)
I use an insert to put some text into the fields (using perl) when I look at the fields I find that spaces are used to "pad out" the text to the field size.
This didn't happen with MySQL and PHP, is there any way to disable this?
Server: Msg 8952, Level 16, State 1, Line 1 Table error: Database 'Multiflex_YBS', index 'mf_InvObject.I_mf_InvObject_Archived' (ID 308196148) (index ID 2). Extra or invalid key for the keys: Server: Msg 8956, Level 16, State 1, Line 1 Index row (1:1189627:69) with values (Archived = Jul 6 2005 10:04PM and InvObjectId = 4374699) points to the data row identified by ().
INSERT@Sample SELECT'a', 1, 'new', 1,'1/1/2003' UNION ALL SELECT'a', 2, 'renewal',2,'8/2/2003' UNION ALL SELECT'a', 3, 'renewal', 3, '2/1/2004'UNION ALL SELECT'a', 4, 'renewal', 4,'11/1/2004' UNion ALL SELECT'a', 5, 'renewal' ,5, '3/8/2006'UNION ALL SELECT'a', 6, 'new', 1, '3/1/2004' UNION ALL SELECT'a', 7, 'new', 1,'12/3/2005' UNION ALL SELECT'a', 8, 'renewal',2, '8/2/2005'UNION ALL SELECT'a', 9, 'renewal', 3,'9/2/2006'UNION ALL SELECT'a', 10, 'renewal',4, '10/2/2006'UNION ALL SELECT'a', 11, 'renewal', 5, '11/2/2006' UNION ALL SELECT'b', 1, 'new', 1,'8/2/2003'UNION ALL SELECT'b', 2, 'new', 1,'9/2/2003'UNION ALL SELECT'b', 3, 'new', 1,'8/2/2005'UNION ALL SELECT'c', 1, 'new', 1,'8/2/2004'UNION ALL SELECT'c', 2, 'renewal',2,'8/2/2005' UNION ALL SELECT'c', 3, 'renewal',3,'9/2/2005' UNION ALL SELECT'd', 2, 'new',1 ,'8/2/2005'UNION ALL SELECT'd', 3, 'renewal',2, '4/2/2006'UNION ALL SELECT'd', 4, 'renewal',3, '6/2/2006'UNION ALL SELECT'd', 4, 'renewal',4,'9/2/2006'
I want to remve all records serials startign with type 'new' (neworder 1) which is later than ,1/1/2005' and subsquncial renewals The desire result should be:
