Hi,
can i deploy reporting services rdl files into different folders in RS?
will it be able to create the folders by itself or do i need to create them beforehand?
thanks for any answers.
-
HY
I want to give the permission to a user to view only one folder among 10 folders on Home page of report server. I don't want that user to view other folder than his/Her Own folder on report server home page.
I went through the below URL but it didn't work.
[URL]
Hi, I am a new user for RS so this might be a very dump question for some of the advanced users here.
I am using SQL 2005 RS and was wondering how I can deploy reports to specific folders that I created on the Reports page. I do know that I can go to Properties to move the reports to different folders. But the problem I have is when I deploy the reports from VS 2005 ( I created the reports using VS 2005) they were deployed back to the old/root folder. How can I change the 'deploy-to' destination folder for the reports in VS 2005?
Many Thanks,
Casey
I am using Visual Studio 2005 and trying to deploy reports to SQL Server 2000.
I get the following message:
A connection could not be made to the report server http://aklink1/reportserver.
------------------------------
ADDITIONAL INFORMATION:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.ReportingServices.Designer)
Please help!
When I try to put a new report in existing folder there's no problem,but now i have fresh installed Reporting Services and no Visual Studio2005. How do i open a new folder?
View 1 Replies View RelatedI am using vista, iis7 sql server 2005 sp2, vs 2005.
i first noticed that i could not deploy to the localhost server after upgrading to vista.
i installed sql server sp2 and configured the iis7 using the control panel. Everything i needed to check off got loaded exept the asp.net check box in the ApplicationDevelopmentFeatures subcategory under the iis configuration section.
It errored out when i clicked apply. there was no specific error just that it did not get added.
Controlpanel> Programs>T urnWindowsFeaturesOnAndOff> InternetInformationServices> WorldWideWebServices> ApplicationDevelopmentFeatures> Asp.net (check box)
When i click OK, afte a few minutes, i get a message:
"An error has occurred. Not all the features were successfully changed."
what good is iis7 if it cannot support asp.net?
I assume something is wrong. It is not permissions. I am the administrator account and i have assigned my account as the administrator for both sql server and reporting services.
So what is it?
Jerry Cicierega
Hi All,
I installed SQL Server 2005 SP2 recently. After that when I try to
deploy a solution in SSRS 2005, I get a dialog box with title:
"Reporting Services Login". It has my server listed as the first row:
"http://localhost/reportserver" and then it has two text boxes asking
for Username and Password.
I checked my IIS settings and only Integrated Security is checked for
the Reports Server folder (and for the entire website). I tried to
change that to Allow Anonymous Access = Checked, but still the same
problem.
Any ideas?
Thanks! GB
Is there a known problem with BIS Deploy not clearing cache. I repeatly (but not always) have an issue where I will do a BIS Deploy of an RDL but when I run it, the old report runs. I can't clear this out until I explicitly log into the Report Manager and explicitly delete the RDL and re-deploy from the BIS.
Is there a workaround, fix, process change, configuration change I can do to keep this from happening?
So I get the basics, have a script that can deploy a single report to a single server. I have other simple scripts that work as well. Now I want a script that can deploy a single report to multiple Sharepoint servers. I have about 30. I know we are probably doing this wrong, as in, we shouldn't be deploying the same report to 30 sites, as they are all all technically all on the same server however they are all independent site collections so as far as I know there is no way to deploy them to a central location and then link to them from each site.
So I tried to copy elements of my single report deploy script and duplicate the Sub Main() to Sub Main1() and Sub Main2() with multiple "ParentPath1" dims, yes I know I'm stupid. That obviously didn't work. So looking at some other scripts including my own subscription updater and I'm sure I need to do some kind of "For Each item in X" but where to start. The other lists I've seen all come from rs.Something. My list is just 30 variables in the script, how can I say for each site in this list, Publish this report?
Here's the simple script that works fine. I just don't know how to modify it to make it deploy this to multiple sites. After I figure that out, I was going to accept the challenge of deploying multiple reports to multiple sites in a single script...
Dim warnings As Warning() = Nothing
Dim parentFolder As String = "Reports"
Dim filePath As String = "filepath"
Dim reportName As String = "Report file name"
Dim parentPath As String = "Sharepoint site URL"
Public Sub Main()
[Code] ....
I have converted the VS 2013 WinForm project to VS 2015. Once I installed it on client, report viewer is asking for Microsoft.ReportViewer.WinForms 12.0.0.0.With VS 2013 projects Report Viewer 2012 Runtime worked fine. I haven't been able to locate anywhere newer version of Report Viewer Runtime/
View 2 Replies View Related
I would like to deploy several reports to production server, Do i need to install reporting services entire software in order to run the reports or is it possible to just have runtime files installed on it to run the reports.
please help, i have almost 100 reports to be deployed on this server which is located in other country.
Thanks for the helpful information.
(i am using SQL server 2005 / reporting services 2005.)
If I run the below command, it clean up the files inside the folders but unable to clean up the folder and sub-folders older than 30 days. xp_ cmd shell ' forfiles -p "D:abcd" -s -m *.* -d -30 -c "cmd /c del /Q @path"'
View 4 Replies View RelatedI'm using sp_OACreate in a scalar function to create a folder if it doesn't exist, and it works fine if you're asking it to create a single folder. For instance: C:Newfolder
It creates "Newfolder"
However, if I try to ask it to create C:NewfolderNewsubfolder
It doesn't work
Here's the code:
DECLARE @Exists int, @ObjFile int, @ObjFileSystem int, @Folder nvarchar(500) = 'C:',
@Action tinyint = 1 --(0 to check if folder exists, 1 to actually create it)
EXEC dbo.sp_OACreate 'Scripting.FileSystemObject', @ObjFileSystem OUT
EXEC dbo.sp_OAMethod @ObjFileSystem, 'FolderExists', @Exists OUT, @Folder
[Code] .....
I have a simple FOR EACH loop who's task is to go to a folder, find all .zip files and then extract them to a directory of my choosing. I only want this step to extract files in a particular (root) directory.
What is happening is after the step extracts the main file to the specified output directory, it then goes to the next directory and extracts the files in THAT directory - even though I do NOT have "traverse subfolders" selected.
What is going on here? This has never happened before - at least when I was developing these packages with SQL 2008 R2...
Is there any way we can download sharepoint folders using ssis. I have a specific link(View on sharepoint) which I would like to download using ssis, Is it possible?
View 2 Replies View RelatedThis issue has been raised in a tangentially related thread (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=301467&SiteID=1) but no thread has been started specific to this issue. When trying to deploy a reporting services project using devenv on the command line, the following error is raised for each report.
Code Snippet
Error : Invoke or BeginInvoke cannot be called on a control until the window handle has been created
We have a single solution with multiple reporting services projects, one project for each folder in our directory tree. We are trying to use the solution file as a "make file" by issuing the following batch command.
Code Snippet
devenv.exe /Deploy Stage "c:My ProjectsReportsReports.sln" /out "ReportDeployment.out"
Is this even possible?
Hello,
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified.
Restored my Reportserver and ReportserverTempDB databases
Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database
System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'?
Is it possible to migrate from 32bit to 64bit?
Any help is appreciated
I've recently installed Reporting Services 2005 on a Windows 2003 Server. Both have had SP2 applied and other necessary patches. I can't deploy a report from my desktop machine to the Reporting Instance. I get the following error:
===================================
A connection could not be made to the report server http://db04SSRS/ReportServer. (Microsoft Report Designer)
===================================
The request failed with HTTP status 503: Service Unavailable. (System.Web.Services)
------------------------------
Program Location:
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2006.ReportServiceAuthentication.GetAuthenticationMode()
at Microsoft.ReportDesigner.Project.ReportServiceClient2006.CheckAuthenticated()
at Microsoft.ReportDesigner.Project.ReportClientManager.DetectEndpointAndAuthenticate(String url, ICredentials credentials, String& authCookieName, Cookie& authCookie, EndpointType& endpointType)
at Microsoft.ReportDesigner.Project.ReportClientManager.GetCredentials(String url)
at Microsoft.ReportDesigner.Project.ReportProjectDeployer.PrepareDeploy()
Also, from SQL Server Management Studio while logged onto the Windows 2003 Server, I can connect using http://localhost/ReportServer, but I CAN NOT connect with just the servername db04SSRS. I can connect to the Analysis Services and the Database Engine with just the servername
I've seen several threads with similar issues, but none of the solutions have worked.
I'm making my first attempt at creating a cube using Analysis Services based on my exisiting datamart. Datasource, views, and dimensions have been defined. But comes deploying the cube, it's giving the error saying "A connection cannot be made. Ensure that the server is running." The Deploy Target server and database are the same where my datamart is. Or, maybe I don't know what I'm doing.
Would appreciate any suggestion for my enlightenment. Thanks
how to deploy web services on local machine. I created self certificate in IIS and then build the solution in the visual studio. After I build the solution, I found that automatically it created the virtual directories for the web services under the default website in the IIS Manager. When I click and select the browse it is not working.
View 9 Replies View RelatedI have created a package using SSDT2012 studio and it is failed to deploy under sql server 2012 sp1.Data inserting into sharepoint from sql server 2008 r2 database.The error says:The package failed to load due to error 0xC0010014.
View 9 Replies View RelatedIs it possible to deploy or import an SSIS package developed in visual studio 2010 onto a 2008 R2 integration server?
package: developed in vs2010, SQL Server: SQL Server 2008 R2.
Trying to deploy the package onto the server.
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets?
Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
Thanks to anyone who can help.
-- Mark
Any script in ssis 2012 packages deployment and create the jobs though power shell script.
View 3 Replies View RelatedI migrated our TFS server from TFS2010 on one server to another server running TFS2013. I get the SSIS projects to build into .ISPAC files fine using .PROJ files or by using the build option in Visual Studio. And I can deploy the project to another machine running SSIS via the Visual Studio deploy option. The problem happens when I try to automate this via ISDeploymentWizard.exe running on the machine where the package is deployed, it fails with the error: "The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails."
i assumed that this could be due to the package being built with newer VS tools so I updated the management studio bits to the latest for SQL 2012 SP2, and after I updated the paths to use the latest ISDeploymentWizard.exe version, it now fails with the error: "To launch the Integration Services Deployment wizard, one of the components: Integration Services, Management Tools - Basic or SQL Server Data Tools has to be installed by the %SQL_PRODUCT_SHORT_NAME% Standard, Enterprise, Developer, or Evaluation
To install a component, run SQL Server Setup and select the component name."As I mentioned, I have SQL 2012 SP12 Enterprise Edition 11.0.5058.0 (X64) running on the machine with the instance of SSIS where the package is being installed.I also installed VS 2013 on that machine, built and deployed the .ISPAC to the same local machine just fine. I just can't get it to work with ISDeploymentWizard in automation..
Am getting errors trying to deploy a dtsx created by ms (the reporting services execution log one) to which I have made zero changes, but it is not working (2 errors shown below)
error from deployment wizard:
===================================
Could not save the package "H:SSISRSlogRSExecutionLog_UpdateinDeploymentRSExecutionLog_Update.dtsx" to SQL Server "xxxxxxxxxxx". (Package Installation Wizard)
===================================
The SaveToSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToSqlServer(Package package, IDTSEvents events, String serverName, String serverUserName, String serverPassword)
at Microsoft.SqlServer.Dts.Deployment.DtsInstaller.SavePackageToSqlServer(WizardInputs wizardInputs, String packagePassword, Boolean bUseSeverEncryption, String serverName, String userName, String password, String packageFilePath, List`1 configFileNames)
at Microsoft.SqlServer.Dts.Deployment.DtsInstaller.InstallPackagesToSqlServer(WizardInputs wizardInputs)
===================================
The SaveToSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.SaveToSQLServer(IDTSPackage90 Package, IDTSEvents90 pEvents, String ServerName, String ServerUserName, String ServerPassword)
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToSqlServer(Package package, IDTSEvents events, String serverName, String serverUserName, String serverPassword)
error from sql management studio
===================================
Invalid access to memory location. (Exception from HRESULT: 0x800703E6) (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToDtsServer(Package pPackage, IDTSEvents pEvents, String sPackagePath, String sServerName)
at Microsoft.SqlServer.Dts.ObjectExplorerUI.ImportPackageAsAction.ImportPackage(ImportPackageAsForm dlg)
Is it possible to deploy a SSIS package without building an Integration Services Catalog on the server?
View 4 Replies View RelatedI work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will
dispaly(ID, NAME_AR, JobTitle_AR)
Hint:this done pragmatically
how to do this in reporting services.
How can deploy Reporting Service 2005 runtime with VisualStudio 2005?
The reason here goes...
I have completed my project in VS2005. Now I am trying to make package. But here, i do not know how to deploy Reporting Service (My Report files) to Customer's Server with Setup or any other runtime solution.
thanks
any replay will be appreciated.
Hi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
[code]...
Hi all,
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
How can I solve this problem?
Thank you very much.
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies View Related