How To Set Column Name Dynamically?
Oct 18, 2006
HI chaps
my scenario is that, i have a table in which i have column such as col01,col02,col03....col31
i want to retrieve the records related to that column by specifying the name dynamically (by using loop) as fist three character are same ('col??') and i have to do integer increment in last two character (???01...???31). Is it possible that I can use variable for column name?, if yes how? or is there any other way to achieve this task ?
waiting for your reply
regards
View 7 Replies
ADVERTISEMENT
Jun 4, 2015
How to change column size dynamically depends on content of the column.
View 2 Replies
View Related
Mar 3, 2008
I want to choose a column dynamically depending on a session variable.
In other words, each customer has a different price level. so I need to choose the column that corresponds to thier price level in thier customer record
Any help is appreciated.
below is my futile attempt
SelectCommand="SELECT cove.CATALOG.ITEM_NO,cove.catalog."& <%#= session("pl") %> & ", cove.CATALOG.DESCRIPTION, cove.CATALOG.DESCRIPTION2, cove.CATALOG.DESCRIPTION3, cove.PRODLINE.DESCRIPTION AS Expr1, cove.CATALOG.GRP, cove.COMPANY.PRL, cove.COMPANY.COMPANY FROM cove.CATALOG INNER JOIN cove.COMPANY ON cove.CATALOG.WEB_STATUS <>'[I]' cove.COMPANY.I LEFT OUTER JOIN cove.PRODLINE ON cove.CATALOG.PRODLINE = cove.PRODLINE.CODE WHERE (cove.COMPANY.COMPANY = @company) AND (cove.CATALOG.GRP <> '[ACC]')">
<SelectParameters>
View 3 Replies
View Related
Sep 29, 2004
Hey all. I'm trying to create a stored proc that will update a variable column, depending on the parameter I pass it. Here's the stored proc:
CREATE PROCEDURE VoteStoredProc
(
@PlayerID int,
@VoteID int,
@BootNumber nvarchar(50)
)
AS
DECLARE @SQLStatement varchar(255)
SET @SQLStatement = 'UPDATE myTable SET '+ @BootNumber+'='+ @VoteID + ' WHERE (PlayerID = '+ @PlayerID +')'
EXEC(@SQLStatement)
GO
I get the following error:
Syntax error converting the nvarchar value 'UPDATE myTable SET Boot3=' to a column of data type int
The update statement is good, because if I use the stored proc below (hard-coded the column), it works fine.
CREATE PROCEDURE VoteStoredProc
(
@PlayerID int,
@VoteID int,
@BootNumber nvarchar(50)
)
AS
UPDATE
myTable
SET
Boot3 = @VoteID
WHERE
PlayerID = @PlayerID
GO
Is there a way to dynamically choose a column/field to select from? Or is my syntax incorrect..?
Thanks!
View 2 Replies
View Related
Jan 14, 2008
am passing column name as parameter, so i wanted to select column name dynamically.
eg: select columname1,columname2 where @param = columnname1,columnname2.
when @param =columnname1,columnname2. select should be of respective column. if @param = columname2,columnname8, then select columname2,columnname8 from table1 where coulmnname2='1' and columnname8='2'.
love all
View 5 Replies
View Related
Nov 30, 2007
Hi All,
I have a series of tables need to import to server. When creating the target tables, I want to change the columns name as well, for example:
Source table column Target table column
Name FN_Name
Age FN_Age
The problem is I suppose I don't know the columns name in source table, I want to the tasks scan the source table and make the change programmlly.
Which tasks or approaches can be used to implement this?
Thanks
Micror
View 6 Replies
View Related
Mar 21, 2007
I'm looping through Me.ComponentMetaData.InputCollection(0).InputColumnCollection... and get the column name of the inputcollection in a script component. Now, what i want to do is set a value to all of the input columns using a loop. If the type is an int, set it to 1, if string then set it to "1". Anyway to approach this problem?
Thanks!
View 1 Replies
View Related
May 21, 1999
I'm trying to create a procedure that can access a column in a table dynamically.<br>
Lets say I have the following table<br>
create table table_items<br>
(rec int identity not null,<br>
item1 int,<br>
item2 int,<br>
item3 int)<br>
and I have a procedure as such
create procedure access_item<br>
@rec int,<br>
@itemindex int,<br>
@item int as<br>
select @item = (select item1 from table_items where rec = @rec)<br>
However, the column I want to access is @itemindex.<br>
If @itemindex = 1, then set @item to item1<br>
if @itemindex = 2, then set @item to item2<br>
if @itemindex = 3, then set @item to item3<br>
I can't use a simple 'if/then' selection, because the number of columns in the table can grow, and I don't want to have to rewrite the procedure everytime a column is added.<br>
How do I do this?<br>
I tried to use an execute command, as such<br>
create procedure access_item_2<br>
@rec int,<br>
@itemindex int,<br>
@item int as<br>
declare @sql varchar(255)<br>
select @sql = "select @item = (select item" + convert(varchar(2), itemindex) + " from table_items where rec = @rec)"<br>
execute (@sql)<br>
but when the procedure runs, I get the following error:<br>
'@item is not a valid variable.'<br>
What else can I do?<br>
Please e-mail me at sam@microcsl
View 2 Replies
View Related
Jun 2, 2008
Hi,
There is a table exists in a database, I have to write a stored procedure to create the same table in different database, with the same column name and field. This should be done in runtime. Is it possible. The table will be passed as a parameter to the stored procedure.
View 3 Replies
View Related
Feb 28, 2008
Can someone please help I'm writting the following query.
SELECT
(SELECT c.column_name FROM information_schema.tables T
JOIN information_schema.columns C
ON t.table_name = c.table_name
WHERE t.table_type = 'base table' and t.table_name like 'L_%' )
INTO #TempTable FROM TableA A LEFT JOIN [Server-Name].DB_Name.dbo.TableB B ON A.ID = B.ID
I'm trying to put commas between column names. How do I go about doing that?
View 16 Replies
View Related
Nov 23, 2005
Hi,In my stored procedure I'm doing a SELECT onINFORMATION_SCHEMA.TABLE_CONSTRAINTS. However there is no unique id onthis table, so I was wondering if it was possible to add it dynamicallyin my SELECT, so that I would assign a unique id to each recordreturned by my SELECT?Thanks for your support.
View 3 Replies
View Related
Feb 5, 2008
We have a query in which we have data in fields called TS1Min, TS1Max, TS1Avg, TS2Min, TS2Max, TS2Avg etc.
We have a different table in which we define that vale of TS1, TS2, as an example TS1 might equal RED, TS2 might equal BLUE.
We have written a query that puts TS1Min, TS1Max, TS1Avg, TS2Min, TS2Max, TS2Avg in a temp table #TEMPA
and we also put the values of RED and BLUE in another temp table #TEMPB
now we want to select * from #TEMPA but rename the headings TS1Min to display RED-TS1Min, TS1Max as RED-TS1Max, TS1Avg as RED-TS1Avg etc...
any ideas on how to do this
View 4 Replies
View Related
Oct 3, 2007
I have the folowing databases DB1,DB2,DB3,D4,DB5........
I have to loop through each of the databases and find out if the database has a tablename with the word 'Documents'( like 'tbdocuments' or 'tbemployeedocuments' and so on......)
If the tablename having the word 'Documents' is found in that database i have to add a column named 'IsValid varchar(100)' against that table in that database and there can be more than 1 'Documents' table in a database.
can someone show me the script to do it?
Thanks.
View 6 Replies
View Related
Apr 10, 2008
Dear All,
We are using UnPivot task to convert the columns into rows using the Excel File as source. But the Excel file column names are changing frequenly sometimes its having only 4 columns sometimes its 10 columns.
Everytime we are checking and unchecking the column list in Unpivot Task.
can anybody help us to solve this issue that Unpivot task should take the column name dynamically.
Thanks,
Syed
View 1 Replies
View Related
Jan 25, 2008
hi, I have a question regarding calling sql table columns dynamically? workflow would go as:1. user enters search term into a textbox2. user checks a checkbox to search by column in sqldb (eg.. firstname or surname) pseudo sql would go like......SELECT +%column1(checkbox1.value)%+ OR +%column2(checkbox2.value)%+ OR +%column3(checkbox3.value)%+WHERE column1 = +%TextBox.Text%+ OR column2 = +%TextBox.Text%+ 3. display results in gridview my sql needs to improve greatly so any code insight(good book or link) would be terrific . thanks
View 10 Replies
View Related
May 19, 2015
DELETE FROM Report_temp2
WHERE MSSalesID in
( Select Report_temp.MSSalesID FROM Report_temp)
DELETE FROM Report_temp
WHEREMSDate < '2015-07-01'
Actually the year stating form july.
Q1 is july,aug,sep.
Q2 is oct nov,dec.
Q3 is jan,feb,mar.
Q4 is april, may,june.
So what I need is dynamically I want to delete the data every year prior to current year.
View 4 Replies
View Related
May 1, 2006
I am developing several charts with column type and sub type as stacked. There is a requirement from the users that they want an option to choose the type of chart.
Is it possible to change chart type dynamically from say Column type to Line type based on user option in front-end?
Any help will be appreciated.
Thanks in advance !!
View 5 Replies
View Related
Oct 30, 2015
I got a table which gets populated by stor proc where we pivot the Sum(Balance of mortgage) by YYYYMM for the whole duration of the loan term.
I have a requirement to rename the column header where the previous month end balance period be renamed to P0.
if we run the report today, then the balance as at 31/09 should show under column P0 which now shows under 201509 and then P0 keeps shifting with each month run.
How do I dynamically rename the column headers.
View 7 Replies
View Related
Oct 5, 2015
I have to display three months name as column name in ssrs reports. These month column will be dynamically. So i have to display the column dynamically.
View 3 Replies
View Related
Jun 27, 2015
how to create excel with sheetname and column name dynamically
View 4 Replies
View Related
Nov 11, 2015
I developed a SSRS report, the problem is i dont have data in DEV server. So i dont know how to adjust the column lengths in ssrs report. is there any property so that the column length can be adjusted dynamically based on the data length whenever data is available in production.
View 3 Replies
View Related
Dec 5, 2007
Hi All,
The current/ Base table would be like below,
Products
level
Date
N1
b
11/5/2007
N2
p
11/6/2007
N3
p
11/7/2007
N4
p
11/14/2007
N5
b
11/15/2007
N6
p
11/23/2007
Expected Result.
<=11/7/2007
<= 11/14/2007
<=11/21/2007
b
1
1
2
p
2
3
4
Total
3
4
6
As you can see, the above table has cumulative data.
1. It calculates the number of Products submitted till a particular date- weekly
2. The date columns should increase dynamically(if the dates in base table increases) each time the query is executed
For ex: the next date would be 11/28/2007
I tried something like, it gives me count of €˜b€™ level and €˜p€™ level products by week
declare @date1 as datetime
select @date1 = '6/30/2007'
while (@date1 != (select max(SDate) from dbo.TrendTable))
begin
set @date1 = @date1 + 7
select Level, count(Products)
from
dbo.TrendTable
where SDate < @date1
group by Level
end
what I think is required is a pivot that dynamically adds the columns for increase in date range.
/Pls suggest if any other way of achieving it.
Pls help!!!
Thanks & Regards
View 3 Replies
View Related
Apr 19, 2013
i have below table in DB
DB Table
ID
Column
Row data
1
Supplier CODE
1001
2
Supplier Name
ACB
3
Product
7K7
4
Price
1000
now I create  one report parameter order1 IF I will  give order1.value=1,2,3 then Report will come like this :--
Suppliercode
Supplier Name
Product
1001
ACB
7K7
IF I will  give order1.value=3,2,1 then Report will come like this :--
Product
Supplier Name
Suppliercode
7K7
ACB
1001
IF I will  give order1.value=1,3 then Report will come like this :--
Suppliercode
Product
1001
7K7
View 35 Replies
View Related
Oct 15, 2015
Is it possible to include a currency symbol in an amount-field in PowerPivot/Pivottable based on a Currency column in a table? Something as the same as with SSAS MD. And I don't want fixed values in my code.
View 3 Replies
View Related
Apr 9, 2015
I am having one store procedure which use to load data from flat file to staging table dynamically.
Everything is working fine.staging_temp table have single column. All the data stored in that single column. below is the sample row.
AB¯ALBERTA ¯93¯AI
AI¯ALBERTA INDIRECT ¯94¯AI
AL¯ALABAMA ¯30¯
After the staging_temp data gets inserted into main table.my probelm is to handle such a file where number of columns are more than the actual table.
If you see the sample rows there are 4 column separated by "¯".but actual I am having only 3 columns in my main table.so how can I get only first 3 column from the satging_temp table.
Output should be like below.
AB¯ALBERTA ¯93
AI¯ALBERTA INDIRECT ¯94
AL¯ALABAMA ¯30
How to achieve above scenario...
View 1 Replies
View Related
Jul 28, 2015
I have a excel file which has a column called "Code" and their values are A,B,C,D,E,F,G,H. I want to create a new column called "status" based on the values of "Code".
Code:
A
B
C
D
E
F
G
H
If A,C,E,G then "status" = "Active" else if B,D,F,H then "Status" = "Inactive". I like to do it using "Derived Column".
View 4 Replies
View Related
Oct 14, 2006
Hi,I have 30 Table with same structure but it will accept different value at RunTime according to AirCraftType. I wand to create a stored prosedure that will accept TableName, FlightDate, FlightNo. whenever i wnat to execute this code in the database I received error :Must declare the variable '@TableName'create proc InsertDataForAirBus330 @FlightNo varchar(5),@TableName varchr(5),@FlightDate datetime
as
insert into @TableName values(@JourneyDate,@FlightNo,18,42,280,3,7,35)plz suggest me how to solve this pboblem...Jasim...
View 2 Replies
View Related
Aug 13, 2007
How to create a sql statement that dynamically matches a database name in a stored proc. Somthing like this:
Select Table_name
From Information_schema.Tables
Where Table_type = 'BASE TABLE' and Objectproperty (Object_id(Table_name), 'IsMsShipped') = 0
and table_name like 'Item%Master'
and (DATABASENAME=????????????????)
View 6 Replies
View Related
Jun 7, 2008
Hi....I am fresh to asp.net .... i want to get the Request.QueryString Value Dynamically in SQL Query ... I have attached the coding of two files please gothrough and give the solution..First File : -actyearwise.aspx <%@ Page Language="C#" AutoEventWireup="true" CodeFile="actyearwise.aspx.cs" Inherits="acts_actyearwise" MasterPageFile="~/MasterPage.master" %><asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" runat="server"> <asp:FormView ID="FormView1" AllowPaging="false" DataSourceID="AccessDataSource1" Width="80%" align="center" runat="server"> <ItemTemplate> <tr style="font-family: Arial; font-size: small;"> <td align="left" width="7%"> <a id="href1" href="actcheck.aspx?2007" target="_self">2007</a> </td> <td align="left" width="7%"> <a id="A1" href="actcheck.aspx?2006" target="_self">2006 </a> </td> <td align="left" width="7%"> <a id="A2" href="actcheck.aspx?2005" target="_self">2005 </a> </td> <td align="left" width="7%"> <a id="A3" href="actcheck.aspx?2004" target="_self">2004 </a> </td> </tr> </ItemTemplate> </asp:FormView> <asp:SqlDataSource ID="AccessDataSource1" runat="server" OnSelecting="AccessDataSource1_Selecting" ConnectionString="Data Source=.SQLEXPRESS;AttachDbFilename=C:InetpubwwwrooteLawApp_DatasampleDB.mdf;Integrated Security=True;User Instance=True" ProviderName="System.Data.SqlClient" SelectCommand="SELECT * FROM actindex "></asp:SqlDataSource></asp:Content><asp:Content ContentPlaceHolderID="FooterPlaceHolder1" ID="Content2" runat="server"></asp:Content> actyearwise.aspx.csusing System;using System.Data;using System.Configuration;using System.Collections;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;using System.Web.UI.HtmlControls;public partial class acts_actyearwise : System.Web.UI.Page{ protected void Page_Load(object sender, EventArgs e) { } protected void AccessDataSource1_Selecting(object sender, SqlDataSourceSelectingEventArgs e) { }}// This page works Properly... In the actyearwise.aspx ..just some years with link... i have entered ...the href page is actcheck.aspx(below).. In this page i want the years dynamically.. please go throughSecond file : -actcheck. aspx <%@ Page Language="C#" AutoEventWireup="true" CodeFile="actcheck.aspx.cs" Inherits="acts_actfiles_actcheck" MasterPageFile="~/MasterPage.master" %><asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" runat="server"> <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" CellPadding="3" DataKeyNames="actno" DataSourceID="AccessDataSource1" Width="100%" AllowSorting="true"> <Columns> <asp:BoundField HeaderText="actno" Visible="False"/> <asp:TemplateField SortExpression="actno"> <ItemTemplate> <table width="80%" align="center"> <tr> <td align="left" width="3%" colspan="3"> <%# Eval("actno") %> </td> <td align="left" width="75%"> <a id="href1" href="actshorttitle.aspx?<%# Eval("actid") %>" target="_self"> <%# Eval("actname") %> </a> </td> </tr> </table> </ItemTemplate> </asp:TemplateField> </Columns> </asp:GridView> <asp:SqlDataSource ID="AccessDataSource1" runat="server" OnSelecting="AccessDataSource1_Selecting" ConnectionString="Data Source=.SQLEXPRESS;AttachDbFilename=C:InetpubwwwrooteLawApp_DatasampleDB.mdf;Integrated Security=True;User Instance=True" ProviderName="System.Data.SqlClient" SelectCommand="SELECT * FROM actindex where actyear = 'check' "> </asp:SqlDataSource></asp:Content><asp:Content ContentPlaceHolderID="FooterPlaceHolder1" ID="Content2" runat="server"></asp:Content> actcheck. aspx.csusing System;using System.Data;using System.Configuration;using System.Collections;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;using System.Web.UI.HtmlControls;public partial class acts_actfiles_actcheck : System.Web.UI.Page{ protected void Page_Load(object sender, EventArgs e) { String check = Request.QueryString.ToString(); } protected void AccessDataSource1_Selecting(object sender, SqlDataSourceSelectingEventArgs e) { }} The text i had bold and italics in the actcheck.aspx... is the problem..... From the actyearwise.aspx .. i was passing the actyear value ..... In actcheck,aspx .. i want to get it dynamically in SQL Query...... Please give the solution .. I am using the SQL database.Table name actindexfields nameactnoactnameactidactyear In the actyear field i have different years .... Thanks in advance
View 5 Replies
View Related
Apr 23, 2002
I'm trying to dynamically set the TOP value in a query, but it doesn't work. Any other way it can be done?
Doesn't work:
declare @sometopvalue int
set @sometopvalue = 100
select top @sometopvalue
field1,
field2,
field3
from table1 ORDER BY BRDCST_DT_TM field1 desc
View 1 Replies
View Related
May 19, 2004
Hi Guys: I am trying to get a top parameter dynamically but it does not seem to work
SELECT TOP
(SELECT COUNT(DISTINCT RegionID) AS COUNT
FROM Sales)
*
FROM Sales
but when I hard code the value it works
SELECT TOP
2
*
FROM Sales
any ideas...Thanks
View 6 Replies
View Related
May 2, 2014
I have a query that pulls many values and I want to loop through each value dynamically using a query.
SELECT COL1 FROM TABLE1
Results:
A
B
C
D
I want those results to loop and run this:
SELECT * FROM TABLE2 WHERE COL2 = A
SELECT * FROM TABLE2 WHERE COL2 = B
SELECT * FROM TABLE2 WHERE COL2 = C
SELECT * FROM TABLE2 WHERE COL2 = D
View 2 Replies
View Related
Sep 2, 2005
Hello,
I am trying to create a sp dynamically. However each time, I run my sp, which creates the dynamic SQL for the sp, then it automatically changes:
CREATE PROCEDURE .....
to
Alter PROCEDURE ....
Then I am obvoiusly getting the error msg:
Invalid object name.
How can I get rid of that?
View 14 Replies
View Related
