Limit The Number Of Digits After Decimal Point In Flaot Data Type
Dec 12, 2007
Hi..
I have a column in the data base with the type Float,
I want to limit the number of digits after decimal point to 2 when I display the value in ASP.NET but I don't know how!?
the number that appear after calculation llike "93.333333"
I use decimal(2,2) as data type but an error accour and this is the message
"- Unable to modify table.
Arithmetic overflow error converting float to data type numeric.
The statement has been terminated."
Can you help me..
thanks
View 6 Replies
ADVERTISEMENT
Dec 8, 2013
I am creating a table on SQL Server. One of the columns in this new table contains whole integer as wells as decimal values (i.e. 4500 0.9876). I currently have this column defined as Decimal(12,4). This adds 4 digits after the decimal point to the whole integers. Is there a data type that will have the decimal point only for decimal values and no decimal point for the whole integers?
View 2 Replies
View Related
Apr 16, 2008
I have just loaded my db table from an excel file using the import wizard. Prior to the import, I set my data types and in the field that I need a number with 1 decimal place I chose a decimal data type.
Made since to me
However, now my numbers do not have the decimals.
Please help.
View 3 Replies
View Related
Aug 30, 2013
How do you display 12.38 as 1238 I can't use round.
View 2 Replies
View Related
Sep 20, 2007
Hi! Every one,
I need to increase my numeric digit in a table.previous column name was "Amount",Precision=18 and scale=6, when I increase Precision=28 it show "Airthmatec Error",
even when increase precision in a new table it work properly.
Thanks.
View 1 Replies
View Related
Jul 24, 2006
Hello!
I would like to cast (convert) data type decimal(24,4) to
decimal(21,4). I could not do this using standard casting function
CAST(@variable as decimal(21,4)) or CONVERT(decimal(21,4),@variable)
because of the following error: "Arithmetic overflow error converting
numeric to data type numeric." Is that because of possible loss of the
value?
Thanks for giving me any advice,
Ziga
View 6 Replies
View Related
Oct 4, 2006
How to display money type data with commas every 3 digits?
I tried :
CONVERT (money, ProjectCost, 1) AS ProjectCost
but it gives me the type as 1234.56 no commas in it?
can anyone help me with that?
thanks!
View 4 Replies
View Related
Jun 18, 2007
I need to store decimal values: decimal(20,15) in my SQL Server 2005 database.
I load data from flat file, convert it using Data Conversion Task to decimal(with scale: 15) and try to save it using OLE DB Destination.
It works fine for 4 digits after the decimal (like 1.1234), but always failes for more than 4 digits (1.12345).
Is the decimal limited to scale 4 ???
Thank you for your help!
Anna
View 3 Replies
View Related
Jun 18, 2007
I have created a simple package that uses a sql command to pull data from an oracle database and inserts the data into a sql 2005 table. Some of the data fields that i am pulling from contain two digits after the decimal point, however this data is lost when it gets into sql. I have even tried putting the data into a flat file, and still the data is lost.
In the package I have a ole db source connection which is the oracle database and when i do the preview i see all the data I need. I am very confused and tried a number of things to get the data into sql, but none work. Any ideas would be very helpful.
thanks
View 6 Replies
View Related
Apr 16, 2008
Hi,
The table in SQL has column Availability Decimal (8,8)
Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability
we tried the datatype float , but it is converting values to scientific expressions€¦(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected
we need to store values as is
Error:
base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}
"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range.
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal()
at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table)
at MS.Internal.MS
COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"
Code in C#
SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default);
DataRow dr;
DataTable dt = new DataTable();
DataColumn dc;
try
{
dc = dt.Columns.Add("Availability", typeof(decimal));
€¦.
dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal
€¦€¦€¦.
}
bulkCopy.DestinationTableName = "dbo.[Tbl_Fact_App_Server_AvailPerMinute]";
bulkCopy.WriteToServer(dt);
thx
View 8 Replies
View Related
Apr 14, 2008
Hello All,
Current Format :-
40.349.462.875.589.2100112127
Required Format
40.3049.4062.8075.5089.20100.00112.00127.00
Currently mine above row data type is float. i need two points after precisions.
Thanks
View 3 Replies
View Related
Sep 19, 2007
I wanted to convert a dataset from vb.net (2.0) to an .XLS file, by MS Jet. My national standard is using decimal commas, not decimal points for numbers signing the beginning of decimal places.
But the MS Jet Engine uses decimal point,in default. Therefore, in the Excel file only string formatted cells can welcome this data, not number formatted.
How can I solve or get around this problem? (with jet if it possible)
iviczl
View 4 Replies
View Related
Feb 16, 2012
This give me 6 digits to the right of the decimal point - can round it to 2???
CONVERT (decimal(18 , 2), 1.0 * NULLIF (vVotesR, 0) / NULLIF (vVotesR + vVotesD, 0) * 100)
View 3 Replies
View Related
Jul 23, 2005
I'd like to convert a Decimal value into a string so that the entireoriginal value and length remains intact but there is no decimal point.For example, the decimal value 6.250 is selected as 06250.Can this be done?
View 6 Replies
View Related
Nov 30, 2007
Hi all,
I am designing some reports for a German branch of my company and need to replace decimal point with a comma and the thousand comma seperator with a decimal point.
e.g.
‚¬1,500,123.00 to ‚¬1.500.123,00
Is there a property that I can change in the report designer to allow this to happen or is this something I need to convert in a Stored Proc.
Any help would be much appreciated
Thanks!
View 5 Replies
View Related
Sep 13, 2000
I have decimal(6,2) defined in a column. If I insert 90.6, it will display 90.60 , 0 becomes .00 .
Is there a way or configuration change so the 0's will on the last will not be showing. And
the 0 will display as 0 not .00?
Thanks in advance.
View 2 Replies
View Related
Aug 31, 2004
Hi There,
I'm using C# to get a value for a DOUBLE precision variable, called "Length", from a textBox using the following line:
Length = Convert.ToDouble( txtLength.Text )
I'm also using the following lines to prepare my stored procedure call:
arParms[9] = new SqlParameter("@Length", SqlDbType.Decimal, 5);
arParms[9].Value = record.Length;
My stored procedure has the following parameter definition:
@Length decimal(9,3)
My problem is that if someone types a value bigger than 999999 in the textbox he will get for sure the following error:
System.Data.SqlClient.SqlException: Error converting data type numeric to decimal.
I don't know how to either make sql or C# to truncate the value or catch the exception to automatically assign 0 to the parameter.
Please Help.
Moshe
View 1 Replies
View Related
Jan 6, 2008
I have calculated values such as ;
OP1: 0,8625OP2: 31OP3: 0,965034965034965OP4: 0,8625OP5: 0,85OP6: 0,931506849315068OP7: 31MOV1 : 9,02903225806451MOV2: 8,68387096774194
I have a SQL database table where I defined all data fields decimal(18,2) for these valuesHere is my code ;
Dim conn As SqlConnection = New SqlConnection("Data Source=SERDARSQLEXPRESS;Initial Catalog=Borsa;Integrated Security=True")Dim sql As String = "UPDATE StockParametre SET OPT1 = @opt1, OPT2 = @opt2, OPT3 = @opt3, OPT4 = @opt4, OPT5 = @opt5, OPT6 = @opt6, OPT7 = @opt7, MOVY = @mov1, MOVD = @mov2 WHERE Stock = @TickerKod"Dim cmd As SqlCommand = New SqlCommand(sql, conn)cmd.Parameters.AddWithValue("@opt1", op1)cmd.Parameters.AddWithValue("@opt2", op2)cmd.Parameters.AddWithValue("@opt3", op3)cmd.Parameters.AddWithValue("@opt4", op4)cmd.Parameters.AddWithValue("@opt5", op5)cmd.Parameters.AddWithValue("@opt6", op6)cmd.Parameters.AddWithValue("@opt7", op7)cmd.Parameters.AddWithValue("@mov1", mov1)cmd.Parameters.AddWithValue("@mov2", mov2)cmd.Parameters.AddWithValue("@TickerKod", TickerKod)
conn.Open()cmd.ExecuteNonQuery()conn.Close()
When I run these code I have the fallowing error..
The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 3 ("@opt1"): The supplied value is not a valid instance of data type float. Check the source data for invalid values. An example of an invalid value is data of numeric type with scale greater than precision..blabla ...I tried
cmd.Parameters.AddWithValue("@opt1", FormatNumber(CDec(op1), 2))
but I have the error
Error converting data type nvarchar to numeric.
Thanks
View 2 Replies
View Related
Feb 19, 2002
I am using the statement below to calculate the average scores of the columns. When the result set is returned I would like to have a scale of 2. I am currently returning a scale of 6. What could I do to fix this?
Thanks for you help,
John
SELECT ((CONVERT(decimal(4,2),c2_3) + CONVERT(decimal(4,2),c2_15) +
CONVERT(decimal(4,2),c2_16) + CONVERT(decimal(4,2),c2_17)) / 4 * 100) AS Score_A
FROM dataquestionnaire
WHERE confirmation = '10/1/2001-999-1'
View 1 Replies
View Related
Jul 19, 2007
I need to store 256 bit hash (SHA-2 alogrithmn) in one of the table'sprimary key. I would prefer to use numeric data type rather varcharetc.* Decimal datatype range is -10^38 +1 to 10^38 -1. I can split my 256bit hash into two decimal(38, 0) type columns as composite key* I can store the hash as varbinary. I never used it and don't havemuch understanding in terms of query writing complexities and dealingit through ADO (data type etc.)It would be heavy OLTP type of systems with hash based primary keyused in joins for data retrieval as well.Please provide your expert comments on this.RegardsAnil
View 1 Replies
View Related
Apr 18, 2005
Hai Every one
i am facing a werid problem it is related to storing a long text data in SQL 2000 the text data is some thing like the following
"dshjfsjlksdjakdjlksadjfeidkadflkdsajfieawirfjalkdfjsakdfjaiekdvnmckaumnmmmmmmmmmmmmmmmoadifdjsakdjfauiereoweiiiiiiiiiiiiiiiiiiiiiiiiiiidalfkjdsa,mlfdsdflvmsaldifsdjfskladfakdfjakladkalfkfadkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkadlkfjaidfajfkamcmmmmmmmmmmmmmmmmmmmmmmmmmmmmmiadlmfalierfmaerjeaiaelelllllllllllllllllllll..."
in short it is really long so i opted to go with TEXT data type as it states that it can store more than 8 kb but when i try to insert this data it gives me error stating that Text data type cannot be of length more than 128...........?
What am i doing wrong........if Text is not the proper datatype to store such a data then can anyone suggest some thing better...............
Thanks in advance
Austin
View 1 Replies
View Related
Feb 22, 2006
Hi all,
I'm trying to update a decimal field with a single decimal number (1.8) the problem i'm having, is that it's rounding the number up (2). I would've thought that a decimal datatype would keep the decimal places correct?
This is quite annoying.. I've been searching around the web for an answer.. To no avail (I'm probably asking the wrong question)
Can someone please point me in the right direction?
View 5 Replies
View Related
Mar 25, 2008
Hi,
I need to generate random numbers that will always contain 9 digits.
How can I do that?
Thanks
Whisky-my beloved dog who died suddenly on the 29/06/06-I miss u so much.
View 1 Replies
View Related
Dec 5, 2013
I have a closed polygon that coincidently is in the shape of Iowa :) I have a point that is within the state and a point WELL outside it, but I get weird results that I don't expect when I try to get it to tell me that the point is within the polygon. Here is some basic code, with long coordinates data.
DECLARE @g geography,
@pIn geography,
@pOut geography
SET @g = geography::STPolyFromText('POLYGON((-91.119987 40.705402, -91.129158 40.682148, -91.162498 40.656311, -91.214912 40.643818, -91.262062 40.639545, -91.375610 40.603439, -91.411118 40.572971, -91.412872 40.547993, -91.382103 40.528496, -91.374794 40.503654, -91.385399 40.447250, -91.372757 40.402988, -91.385757 40.392361, -91.418816 40.386875, -91.448593 40.371902, -91.476883 40.390968, -91.490158 40.390762, -91.500221
[code]...
(1 row(s) affected)As I read that there is a distance of about 7864 meters, this is close to what I would expect, so that's ok. The point outside I would expect a distance as well so that is confusing.. Then we have the intersects, it says that the point inside does NOT intersect but the one outside DOES, this is backed up by the intersection values.
View 1 Replies
View Related
Sep 11, 2014
I have table with data type decimal (18,2) when i try to load more then 2 decimal it is rounding off
Example 34.456 is rounded with 34.46
I want to store 34.45 only with out round in decimal data type how can i achive this
View 2 Replies
View Related
Jan 21, 2014
I have value with data type nvarchar:
total
000000854.00
000000042.00
000000065.17
000000000024
000000000.24
How can i convert to decimal and remove 0 infront? but those with 0.xx would not remove the 0 after the dote.
total
854.00
42.00
65.17
24
0.24
View 6 Replies
View Related
Jul 20, 2006
Hi guys,
I'm trying to write a producure to count the number of digits in a text.
i.e :
text
---------
12 fff 3 a.z
12345 ggg6gg a
123
Result:
--------
3
6
3
It seems to be real easy via RegEx in C# , but i cant figure it out in SQL.
Thank YOU!
View 11 Replies
View Related
Sep 4, 2007
Hi guys, is there any way to solve my problem as title ? Assuming my stored proc is written as below :
CREATE PROC TEST
@A VARCHAR(8000) = '1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,...,5000'
AS
BEGIN
DECLARE @B nvarchar(MAX);
SET @B = 'SELECT * FROM C WHERE ID IN ( ' + @A + ')'
EXECUTE sp_executesql @B
END
GO
View 2 Replies
View Related
Apr 5, 2008
Hi! I tried to save some image data, but it get truncated at 8000 (the table column is defined as Image). I then wrote a converter to try ntext-datatype instead, but it gets truncated at 4000.
Error message:
System.Data.SqlServerCe: @3 : String truncation: max=4000, len=4168
The code uses only ADO entity framework for database access. Is there a way to store binary data larger than 8000 bytes? I am running SQL Compact 3.5 sp 1 BETA.
Henning
View 7 Replies
View Related
Mar 2, 2007
I have a CSV Flat File Source with a Decimal column - but DataPrecision property is grayed out - why?
View 1 Replies
View Related
Aug 31, 2015
So my data is delivered as numeric(9,2)...like 100.00. I have to extract that data and store it as a varchar 0 filled without the decimal place...like 0000010000///I tried the following and it did not work...
RIGHT('000000000'+CONVERT(VARCHAR,[EODPosting].[Amount]),10),
View 8 Replies
View Related
Oct 27, 1998
The following SQL statement returns the correct totals except that
the total value is shifted on decimal place to the right. i.e. a real
total of 955.68 is displayed as 9,556.80. The total_ar field is a money type.
Any help would be appreciated.
Mark
/* AR report Total Greater than 365 days sorted by Dept */
select
a.dept as `Department `,
` A/R 365+ `=sum(case when datediff(day,c.bill_date, getdate()) > 365 then b.total_ar else 0 end)
from
hbm_persnl a, blt_billm b, blt_bill c,hbl_dept d,hbm_matter e
where
e.matter_uno = b.matter_uno and
a.empl_uno = e.bill_empl_uno and
b.bill_tran_uno = c.tran_uno and
b.ar_status = `O` and
e.status_code=`OPEN`
group by a.dept
View 1 Replies
View Related
Jul 29, 2004
I want to force two places to the right of the decimal even if its a whole number.
vbScript
calculatedScore = FormatNumber((rsQFinal("sumEarned") / rsQFinal("sumPossible")) * 100, 2)
I'm not savy enought to know the SQL equivalent of the above but I'd like SQL Server to perform the above rather than my vbScript code.
heres what I have so far but I don't know the formatNumber equivalent:
CREATE PROCEDURE quarterFinalGradeSA @nClass INT, @nQuarter INT, @nStudent INT AS
SELECT (SUM(tblScores.score) / SUM(tblAssignments.assignmentTotalPoints)) AS returnValue
...
View 4 Replies
View Related
