I have a search query on my page. However, since the resultset may be very large, I want to retreive only those results that are currently shown on the gridview page.
Often a user won't browse through more than a couple of pages, so it's b-*** to send all the records to the client.
I know that with a sp you can define that you want to retrieve the first or second x records, but I want to do this with SQL...is that possible?
I am creating a simple SSRS table report through Report Builder. My dataset is looking for the stored procedure . When I execute the Stored procedure through SSMS I get resutset for certain parameters. I execute the dataset (Store procedure) through query designer in dataset properties and I get results back. But when I try to run the report and see the preview, I do not get any results displayed. I been looking on the same issue form last 3-4 days and have not found any clue.
Following is the stored procedure I am using. Also I am passing multivalued parameter through report as well, and I am using spilt function to seperate the libraryid I am reading from parameter values. This works fine. I have similar kind of four other reports and with different stored procedure which exactly follow the same method , like multivalue parameters and other criteria are also very similar. All other reports works just fine.. This perticular report has issue for displying results, following is the stored procedure I am using
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[code]....
I'd like to create a limited user on SQL Server 2005 to minimize any possible problems with my ASP.NET 2.0 website. My question is how limited can I make that user? What exactly does it need to be able to do?
(In case it makes a difference, my site utilizes membership, profiles, and roles, as well as some custom tables and stored procedures that I created.)
Thanks in advance for any advice! :-)
Dear all,
When I try to add the columns to 300,
But still can not over 300 column.
What's limited columns that MS SQL 7.0?
Thank you very much..
Gemmy.
hi all,
I have a field which name is Information
and it type is Varchar (8000),but some time data access than 8000 character, my client told me,make this field to store Unlimited data.
So how can i achive this task, i m using VS 2003 (ASP.NET with VB.NET) with SQL 2000.
Thanks
Shally
Hiya - this might be a bit of a simple question but please bear with me! I have looked reasonably hard for this but can not find an answer:
I have an MSSQL 2000 server running on PC-A and would like to limit certain users (e.g. admin) to be only able to logon when using the actual PC-A machine.
I am aware that you can acheive this in MySQL with the "insert into user (host, user, password) values (localhost, username, password);" command. Is there an equivalent way to do this in MSSQL?
Thanks for your help,
Alistair.
Hi All,
How can I give the user view rights only?
Hi,
I couldn't make a clear title without writing 2 lines.
My problem (I tried to find out through the archives):
this scenario will be used for several DBs on severals servers.
The remotes servers are not mine, I have only access to the backups files, I have no rights to setup a replication relationship.
I'm using a repository server with SQL 2005, and daily, I need to get the latest Full backup from an SQL2000 server, copy it to the repository server, restore it then delete the .bak file.
This is possible by using many different scripts (like .vbs to copy and rename the latest Full backups) then I use SQL job for daily restore.
Process is too long and the time estimated to start next task (and the backup keep growing).
Is there a way to do everything via SQL2005 script (job)?
Initially, the problem is that I have to do this with the Full backups every days (around 5 Dbs 8 Go in average). So if I can use the latest transaction log files (that would eliminate my first question).
The best way is to use log shipping as well but sql2005 is needed on both sides.
Hope I'm clear.
Thanks for any help!
I created a login in SQL Server 2005 for SQL Server Reporting Service training purpose. It seemed the login exceed the connection limit. There were 9 people in the training and some people got the connection errors. Sometimes the connection error went away after the user re-established the connection. Is there a default limit per login? If so, what is the default? Can I change it to unlimited? And how?
Thanks.
DanYeung
I want to use TRIGGER_NESTLEVEL to test if a specific trigger is on the execution stack.
Normally, the table with the trigger is accessed by stored procedures and the user does not have any direct access to the table.
I am having problems doing this because I need to use OBJECT_ID to get the ID to pass to TRIGGER_NESTLEVEL. OBJECT_ID is unable to see the table when the stored procedure is run as that limited user account.
How can I use TRIGGER_NESTLEVEL in this scenario without granting this user permissions on the table?
Here is complete code to reproduce. The output is:
Nest level is: 1 (running as admin)
Nest level is: (null) (running as limited user)
The output that I want would have a 1 instead of (null). Hard coding the specific OBJECT_ID is not the solution that I am looking for, since I want to use identical database scripts on separate installs of my database.
Code Block
IF OBJECT_ID(N'Hello') IS NOT NULL DROP TABLE Hello
IF DATABASE_PRINCIPAL_ID(N'TestUser') IS NOT NULL DROP USER TestUser
IF OBJECT_ID(N'HelloProcedure') IS NOT NULL DROP PROCEDURE HelloProcedure
GO
CREATE TABLE Hello
(
ID INT PRIMARY KEY IDENTITY,
Data INT NULL
)
GO
CREATE TRIGGER HelloTrigger1
ON Hello
FOR INSERT
AS
SET NOCOUNT ON
UPDATE Hello SET Data = 1234 WHERE ID IN (SELECT ID FROM inserted)
GO
CREATE TRIGGER HelloTrigger2
ON Hello
FOR UPDATE
AS
SET NOCOUNT ON
PRINT N'Nest level is: ' + ISNULL(CAST(TRIGGER_NESTLEVEL(OBJECT_ID(N'HelloTrigger1')) AS NVARCHAR(128)), N'(null)')
GO
CREATE PROCEDURE HelloProcedure
AS
SET NOCOUNT ON
INSERT INTO Hello VALUES (0)
GO
CREATE USER TestUser WITHOUT LOGIN
GO
GRANT EXECUTE ON HelloProcedure TO TestUser
GO
EXEC (N'HelloProcedure') -- Prints: Nest level is: 1
GO
EXEC (N'HelloProcedure') AS USER = N'TestUser' -- Prints: Nest level is: (null)
GO
I created a login in SQL Server 2005 for SQL Server Reporting Service training purpose. It seemed the login exceed the connection limit. There were 9 people in the training and some people got the connection errors. Sometimes the connection error went away after the user re-established the connection. Is there a default limit per login? If so, what is the default? Can I change it to unlimited? And how?
Thanks.
DanYeung
I got a report that seems to be limiting its displayed data to the first 8 records but not in the SQL statement itself. Although I have been working with SQL for many years I'm very new to Reporting Services so it may be something very simple, like perhaps a property that can be changed on the report for me to increase the amount of records the report is pulling from the database?
I don't seem to find any property set to 8 though.
Also the report is not pulling the records in the order the query pulls them, but in an apparent random order, I don't need to change this but it may help describe the report a bit better.
Hi all;
qrymillcgetbytype_app ( stored query in MS-Access) in my code :
MS-ACCESS Part:
query defination
PARAMETERS prmMillToolType Long;
SELECT MILLC.ID, MILLC.InsMillBdyID AS [Tool ID], MILLC.SubType, MILLC.Radius AS [End Radius], MILLC.CuttingDia AS [Tool Dia], MILLC.EffAxlCutLen AS [Effec Cut Length], MILLC.OverallLen AS [Overall Length], MILLC.HandOfCut AS [Hand Of Cut], MILLC.NoOfFlutes AS [No Of Flutes], MILLC.TmcID AS [Tool Class], MILLC.Comment, MILLC.Protrusion, MILLC.ShankDia, millC.ShoulderLen AS [Shoulder Length]
FROM MILLC
WHERE (((MILLC.[Mill Tool Type])=[prmMillToolType]) AND ((MILLC.[ON])=True))
ORDER BY MILLC.ID;
C++ PART
bstrSQL contain stored query name "qrymillcgetbytype_app"
hr = piRecordSet->put_Source(bstrSQL);
piRecordSet->Open(vNull, vNull, adOpenKeyset, adLockOptimistic, adCmdUnknown)
it opens fine
but when bstrSQL contain this query name " qrymillcgetbytype_app WHERE ID > -1 AND [Tool Dia] >= 0.000000 AND [Tool Dia] <= 5.000000 "
it displays the same output. Where clause won't work?
Pls help me out.
Im using the Xquery:SELECT @xmlDoc.query('
for $item in (/Collection/Content)
where $item/Html/root/DocInfo/Webinar = "White Paper"
order by $item[1]/Html[1]/root[1]/DocInfo[1]/Title[1] ascending
return $item
');
I only want to return the TOP 5 nodes (not the entire nodelist). What is the FLOWR expression or simplest way to return the limited nodeset?
Thanks
I am using ORDER BY NEWID() to return random record from sql database. how do i go about returning only 5 random records instead of all records.
Thanks.
Hi, I am trying to create a SQL Server user which would only have write permissions. This account would not be able to read, drop, alter, delete etc. It would simply be used to write data.
Is there a way to configure a user like this without scripting the permissions for each table. The DB has some dynamically generated tables, so the users privillges would ideally extend to those newly added tables without having to rerun some kind of script. Is this possible?
Hi, I am trying to create a SQL Server user which would only have write permissions. This account would not be able to read, drop, alter, delete etc. It would simply be used to write data.
Is there a way to configure a user like this without scripting the permissions for each table. The DB has some dynamically generated tables, so the users privillges would ideally extend to those newly added tables without having to rerun some kind of script. Is this possible?
Hi, we have a generic way to call DTS
CREATE procedure dbo.run_our_dts @Our_dts_namevarchar(8000)
as
declare@retcodeint
declare @run_sqlvarchar(8000)
select @run_sql = 'dtsrun /S '+@@servername+' /E /N '+@Our_dts_name
print @run_sql
exec @retcode=master..xp_cmdshell @run_sql
if @retcode<>0
begin
Raiserror('DTS RUN ERROR',16,1)
end
it works fine but ,Only users with SysAdmin privileges can execute CmdExec and ActiveScripting job steps
we don't want to disable this setting
Does anyone now extended procedure
similar to xp_cmdshell, with abilty to
start dtsrun ?
Thank you
Alex
Hi
Does anyone here know why xp_fixeddrives with a limited user returns an empty result set on 2005?
In essence I want to create a report which shows disk space remaining, an upgrade of an old one. It works fine on 2000, but seems to need sysadmin rights on 2k5. I would appreciate it if someone can suggest how to get it working - or an alternative solution!
Cheers
someone recently told me that their bcp export of a table with over MAX_INT rows failed because BCP hit an overflow in the internal counter that bcp uses to tell you how many rows it's exported. You know how it write "rows copied to host file: 40000" to stdout? That number got to MAX_INT, then went negative, then BCP crashed. So they had to start all over and break things up with the -F, -L flags.
I was rather surprised that a program that claims to handle "bulk" data would use a 32 bit int to accumulate the count. I suppose the original sybase dev figured nobody would ever want to export more than 2b rows.
just wondering, has anyone seen this before?
I am about to kick off a similar large export and am planning to break it up so as not to hit this, but that also means I won't be able to verify that it is indeed a problem.
elsasoft.org
I am trying to insert records via ASP, with a user that has only writeaccess to the table (db_datawriter, db_denydatareader).That way, if the server is ever compromised, the access informationstored in the source code's connection string will not allow anybody toactually read the database.The problem is that I would like to use ADO methods to insert the data(to prevent SQL injections), but I can't seem to get the rightconnection. It works in plain SQL, but I'd rather not use it.My current code looks like this:connection="Provider=SQLOLEDB.1;User ID=DBwriter;Password=XXX;DataSource=MYSERVER;Initial Catalog=MYDB;"set conn=server.createobject("ADODB.Connection")conn.mode=2 ' adModeWriteconn.open connectionSet rs = Server.CreateObject ("ADODB.Recordset")rs.Open "MYTABLE", conn, adOpenKeySet, adLockPessimistic, adCmdTablers.AddNewrs.Fields("testfield") = "TESTDATA"rs.UpdateAnd the error I get is:Microsoft OLE DB Provider for SQL Server (0x80040E09)SELECT permission denied on object 'MYTABLE', database 'MYDB', owner'dbo'.(If I use a User with read privileges in the connection stringeverything works fine.)
View 3 Replies View RelatedI have a table with entries tied to a membership database. The problemis that I want to select a limit of sixteen entries per member, perday, where some members have 16+ entries per day.I have this so far ( which I've simplified for this post)SELECT dbo.members.firstname, dbo.members.lastname,dbo.entries.gameDayFROM dbo.members INNER JOINdbo.entries ON dbo.members.memberID =dbo.entries.memberIDIf it's day 5, each member should have 80 total.How can I change this to select only 16 entries for each member, makingsure it's 16 per day based on dbo.entries.gameDay?Thanks for your help.
View 2 Replies View RelatedUsing System.Data.SqlClient is there a limit to the number of connections an application can have to a SQLMobile dB?
If
you have a look at the url below, it says "A device can only have a
small number of connections to an instance of SQL Server at any time"
Does this mean 2, or 8 or what?
Should a app try to use only 1 connection throughout, or can we get away with 2-3?
Is this the same on WM5.0/PPP2003?
Any advice in this area much appreciated!
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/sqlce/htm/_lce_sqlclient_705.asp
p.s. I'm not interested in connection pooling!
hi all,
I installed sql server developer edition on
xp box. created a new ssis project and
then when i right click on control flow
then click new connections
i see only limited connection available.
how can i install the other connection option
such as oledb. etc.
thanks
joey
Hi all,
I have a problem just today after added some tasks. I can only get the "OnPrevalidate" logging info only in both sysdts90 and a text file. Have I messed up with some setting?
Thanks!
Hello all,
I'm very new to this so excuse my naiveity...I have connected my desktop and laptop computer at home, on my desktop I have a series of db's under my default named instance <computername>/sqlexpress and I have created access logins using windows auth. When I connect to the desktop from the laptop using tcp:<computername>sqlexpressuserid I can only see the systemdb's...I am trying to view adventure works, just to see how this remote connection stuff works...any ideas?
Thanks,
Rob
I have connected my desktop and laptop computer at home, on my desktop I have a series of db's under my default named instance <computername>/sqlexpress and I have created access logins using windows auth. When I connect to the desktop from the laptop using tcp:<computername>sqlexpressuserid I can only see the system db's...I am trying to view adventure works, which I can see on the desktop fine using the same login...any ideas?
Thanks,
Rob
Hi I am using sql express to automatically generate users and logins from t-sql. I seem to be having a problem when it comes to restricting their access though. I only want them to be able to select on views and execute stored procedures. at the moment I have created a new database role, schema, login, and user, then added the user to the role but how do I restrict access to the above areas? do the restrictions go on the role, schema, or user? I must confess I find the whole schema and role issue a little confusing and just when I think I've got it, it turns out I haven't :( thanks
View 3 Replies View RelatedHello all,I have a field defined as VARCHAR(8000) yet it only accepts a maximum of 1024 characters. Does anyone know how I can save 8000 characters in a single field?Thanks,Bill.
View 2 Replies View RelatedHi,
For the SQL Express & Std Edition have rows limited....
I have try convert a 3,667,345 rows data into SQL Sever can the SQL Expree 2005 and SQL Std 2000 support this volume of rows???
Ankush Jain writes "I m using Sql Server 2000 in Windoes XP (SP2) with Limited Window Account.
I m new to Sql Server.Please You can tell me how to create database.
When i expand the console root in Enterprise Manager it will show an error : "A connection could not be established to Local""
Can anyone help on this?
In SQL 2005, I use a variant with XML type; it seems that its size is limited here. If I assign a big data to it, it appears not assigned at all. Here is the example:
Code Snippet
declare @xml xml
--cross two table to get many records returned, if nothing is abnormal, just cross more tables here
select * from master.sys.objects a, master.sys.objects b for xml RAW, ELEMENTS
set @xml=( select * from master.sys.objects a, master.sys.objects b for xml RAW, ELEMENTS )
select @xml
--no results here for var @xml
--use single table to get fewer records returned.
select * from master.sys.objects for xml RAW, ELEMENTS
set @xml=( select * from master.sys.objects for xml RAW, ELEMENTS )
select @xml
--results as normal.
Note:here I don't want to test SQL server, I just use XML type variant as oupput for a sproc, and come across the issue here.
Any reply will be appreciated!
I didn't want to deal with any truncation issues so I edited the SQL created by the Import Wizard. I made the fields VARCHAR instead of NVARCHAR and changed the size from the default 50 to 250.
Now I have a triangle warning on the OLE DB Destination control. So I am wondering, is it limited to only handling 50 characters?
IanO