Hi,
I have used several sql queris to generate a report. This queries pull out data from different tables. But sometimes at the same table too.
Basically those are SELECT statements.
I have created stored proc for each SELECT statement. now I'm wondering can I include all SELECT statements in one stored proc and run the report.
If possible, can anyone show me the format?
Thanks
Hi, I have a table containing SQl statements. I need to extract the statements and execute them through stored procedure(have any better ideas?)
Table Test
Id Description
1Insert into test(Id,Name) Values (1,'Ron')
2Update Test Set Name = 'Robert' where Id = 1
3Delete from Test where Id = 1
In my stored procedure, i want to execute the above statements in the order they were inserted into the table. Can Someone shed some light on how to execute multiple sql statements in a stored procedure. Thanks
Reo
Hi all,
I have 2 select statements in my Stored Proc.
I want to display the results of each query in my DataGridView.
However, only the data of the last select query is returned.
Why is this?
Thanks.
I have created a stored procedure with multiple select statements using MSSQL 2000. When I connect to this using a SQLDataSource it only seems to get the first SELECT. I need to access the multiple tables returned by the stoped procedure. Can anyone point me in the dirrection of how to do this.ThanksClearz
View 3 Replies View RelatedHey Guys. I’m having a little trouble and was wondering if you could help me out. I’m trying to create a custom paging control, so I create a stored procedure that returns the appropriate records as well as the total amount of records. And that works fine. What I’m having problems with is reading the data from the second select statement within the code. Anyone have any idea on how to do this? Also.. how can I check how many tables were returned?
Here's my code. I'm trying to keep it very generic so I can send it any sql statement:public DataTable connect(string sql)
{
DataTable dt = new DataTable();
SqlConnection SqlCon = new System.Data.SqlClient.SqlConnection(ConfigurationManager.ConnectionStrings["MyDB"].ToString());
SqlDataAdapter SqlCmd = new SqlDataAdapter(sql, SqlCon);
System.Data.DataSet ds = new System.Data.DataSet();
SqlCmd.Fill(ds);
dt = ds.Tables[0];
//Here's where I don't know how to access the second select statement
return dt;
} Here's my stored procedure:
ALTER PROCEDURE dbo.MyStoredProcedure
(
@Page int,
@AmountPerPage int,
@TotalRecords int output
)
AS
WITH MyTable AS
(
Select *, ROW_NUMBER() OVER(ORDER BY ID Desc) as RowNum
From Table
where Deleted <> 1
)
select * from MyTable
WHERE RowNum > (((@Page-1)*@AmountPerPage)) and RowNum < ((@Page*@AmountPerPage)+1);
Select @TotalRecords = COUNT(*)
from Table
where Deleted <> 1
RETURN
Thanks
I am using SQL sever 2k and C#.
There is a stored-procedure that it has multiple select statements as returned result set. How can I use SqlCommand.ExecuteReader to get all result set?
What if the multiple select statements is " FOR XML", how can I set all xml using ExecuteXmlReader?
I tried to use ExecuteReader or ExecuteXmlReader, but seems that I can only get back the result set of the first select statement, all others are messed up.
stored procedure example: NorthWind database:
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
Create PROCEDURE dbo.getShippersAndEmployeesXML
AS
select * from Shippers for xml auto, elements
select * from Employees for xml auto, elements
RETURN @@ERROR
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
C# code example:
//set connect, build sqlcommand etc
XmlTextReader reader = (XmlTextReader)command.ExecuteXmlReader();
StringBuilder sb = new StringBuilder();
while(reader.Read()) sb.Append(reader.ReadOuterXml());
Thanks for your help.
HiI'm not sure what the best approach for this is:I have a stored procedure which I would like to use to return severaloutput values instead of returning a recordset.CREATE PROCEDURE Test (@param1 int, @param2 int OUTPUT, @param3 intOUTPUT) ASSELECT field2, field3 FROM Table WHERE field1 = @param1I would like to return @param2 as field2 and @param3 as field3How do I do this without using SELECT multiple times?THanks in advanceSam
View 6 Replies View RelatedI ran the below 2 select statements and ended up seeing multiple cached instances of the same stored procedure. The majority have only one cached instance but more than a handful have multiple cached instances. When there are multiple cached instances of the same sproc, which one will sql server reuse when the sproc is called?
SELECT o.name, o.object_id,
ps.last_execution_time ,
ps.last_elapsed_time * 0.000001 as last_elapsed_timeINSeconds,
ps.min_elapsed_time * 0.000001 as min_elapsed_timeINSeconds,
ps.max_elapsed_time * 0.000001 as max_elapsed_timeINSeconds
[code]...
Hi,I am wondering if anyone has any examples of how to run multiple sql statements from a file using .net? I want to automatically install any stored procedures or scripts from a single file on the server when my web application runs for the first time. Thanks for your help in advance!
View 1 Replies View Relatedwhat is the logic in multiple "FROM" statements inside a single query?
View 1 Replies View RelatedI have a requirement where i have to create diffferent stored procedures in different databases based on some criteria. The stored procedure creation scriptswill be in a single T SQL variable.Here is something i trying to achieve.( this is just a sample)USE MASTER
GO
declare @SQLString Nvarchar(1000)
declare @STR Nvarchar(1000)
declare @DBName nvarchar(100)
SET @DBName ='DB1'SET @STR='
create proc sptemp
@id int
as
select * from orders where id=@id
go
'
set @SQLString='USE ' + @DBName + char(10) +'GO'
set @SQLString =@SQLString + @str
EXEC (@SQLString)
When i try to run this script in master it is giving me the following errors:
Msg 170, Level 15, State 1, Line 2
Line 2: Incorrect syntax near 'GO'.
Msg 111, Level 15, State 1, Line 3
'CREATE PROCEDURE' must be the first statement in a query batch.
Msg 137, Level 15, State 2, Line 6
Can anyone help me out in this?
Must declare the variable '@id'.
How do I return a value in a stored procedure? I want to return a value for TheQuarterId below but under all test conditions am only getting back a negative one. Please help! create PROCEDURE [dbo].[GetQuarterIdBasedOnDescription]
(
@QuarterString nvarchar(10),
@TheQuarterId int output
)
AS
BEGIN
SELECT @TheQuarterId = QuarterId from Quarter WHERE Description=@QuarterString
END
how can take codes below and put them into one store procedure to supplie a gridview. also i will like to define the row name on the left like i did to the column on the top using the 'AS'
Code1....
SELECT
SUM(CASE WHEN Month = 'January' THEN 1 ELSE 0 END) AS January, SUM(CASE WHEN Month = 'February' THEN 1 ELSE 0 END) AS February,
SUM(CASE WHEN Month = 'March' THEN 1 ELSE 0 END) AS March, SUM(CASE WHEN Month = 'April' THEN 1 ELSE 0 END) AS April,
SUM(CASE WHEN Month = 'May' THEN 1 ELSE 0 END) AS May, SUM(CASE WHEN Month = 'June' THEN 1 ELSE 0 END) AS June,
SUM(CASE WHEN Month = 'July' THEN 1 ELSE 0 END) AS July, SUM(CASE WHEN Month = 'August' THEN 1 ELSE 0 END) AS August,
SUM(CASE WHEN Month = 'September' THEN 1 ELSE 0 END) AS September, SUM(CASE WHEN Month = 'October' THEN 1 ELSE 0 END) AS October,
SUM(CASE WHEN Month = 'November' THEN 1 ELSE 0 END) AS November, SUM(CASE WHEN Month = 'December' THEN 1 ELSE 0 END) AS December,
SUM(CASE WHEN site_descr = 'SITE1' THEN 1 ELSE 0 END) AS AllTotal
FROM dbo.V_results
WHERE (site_descr = 'SITE1')
Code2.....
SELECT
SUM(CASE WHEN Month = 'January' THEN 1 ELSE 0 END) AS January, SUM(CASE WHEN Month = 'February' THEN 1 ELSE 0 END) AS February,
SUM(CASE WHEN Month = 'March' THEN 1 ELSE 0 END) AS March, SUM(CASE WHEN Month = 'April' THEN 1 ELSE 0 END) AS April,
SUM(CASE WHEN Month = 'May' THEN 1 ELSE 0 END) AS May, SUM(CASE WHEN Month = 'June' THEN 1 ELSE 0 END) AS June,
SUM(CASE WHEN Month = 'July' THEN 1 ELSE 0 END) AS July, SUM(CASE WHEN Month = 'August' THEN 1 ELSE 0 END) AS August,
SUM(CASE WHEN Month = 'September' THEN 1 ELSE 0 END) AS September, SUM(CASE WHEN Month = 'October' THEN 1 ELSE 0 END) AS October,
SUM(CASE WHEN Month = 'November' THEN 1 ELSE 0 END) AS November, SUM(CASE WHEN Month = 'December' THEN 1 ELSE 0 END) AS December,
SUM(CASE WHEN site_descr = 'SITE2' THEN 1 ELSE 0 END) AS AllTotal
FROM dbo.V_results
WHERE (site_descr = 'SITE2')
thanks in advance
Hi guys and gals,
I am trying to create a select statement that will return an INT that I will later have to use in another select statement. I have the following code, however, I keep getting an error that says:
'Error116: Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.'
My Code is below:
//Start of sql
CREATE PROCEDURE ADMIN_GetSingleUsers( @userID int) AS
DECLARE @userSQL intSET @userSQL = (SELECT User_ID, TITLE.TITLE AS TITLE, Cast(Users.Active as varchar(50)) as Active, Cast(Users.Approved as varchar(50)) as Approved, Users.Unit_ID As usersUnitID, * From TITLE, Users WHERE User_ID = @userID AND TITLE.TITLE_ID = Users.Title_ID )
Select Unit_ID, Parent_ID, Unit_Name from UNITS WHERE Unit_ID = @userSQL
//End of sql
Can you point to what I am doing wrong? Thanks in advance!
I was wondering if it's possible to have a stored procedure that has two select statements which you can combine as a single result set. For instance:select name, age, titlefrom tableaselect name, age, titlefrom tablebCould you combine these queries into a single result set?
View 2 Replies View RelatedI know I should know the answer to this, but I just can't quite get the syntax down
Code:
Select case when zipCode = '10185' Then 'Deliver'
Else when zipCode = '2309' And paid = 'Yes' Then 'Deliver'
Else When zipCode = '1291' And paid = 'Yes' Then 'Deliver'
Else When zipCode = '88221' And paid = 'No' Then 'Hold'
Else when zipCode = '34123' Then 'Deliver'
End
From postalDeliveryDatabase
We have a .NET drop down, which gets populated as the user types in letters(last name). If the user types in the single quote we get the error about not escaping the single quote. Question is, which way would it be easier to fix, in the .NET code or in the SQL procedure? I am not to sure if we have full access to the source code since that is a 3rd party control, so if that is not feasible how would I fix that in the stored procedure? This is the current proc that we are using:
Code Snippet
select @str = 'SELECT DISTINCT TOP ' + @Top + ' e.DisplayName
as DbComboText,
e.EmployeeID as DbComboValue
FROM DepartmentDirectory.dbo.Employees ee
INNER JOIN DataMart.dbo.Employees e ON ee.UIN = e.UIN
WHERE e.LastName like ''' + @LastName + ''' AND e.FirstName like ''' + @FirstName + '''
ORDER BY e.DisplayName'
Any help is greatly appreciated.
Hi,We are discussing possible implementation for sql2005 database(s). This database will serve one web portal. Part of data will get into it by hand, and part will be replicated from internal system.Some of us are for creating two separate databases, since there are two separate datasources. One, automatic, will change very little over time and requires almost no maintenance. Other datasource will be manual input. Tables and procedures related to this part will change over time.Some of us are for creating single database, since it will serve one web site. More important this group is concerned about performance issues since almost every select will require join between tables that would be stored in two separate databases. Do these issues exist? Can you share some insights, comments, links about this?
View 2 Replies View RelatedHi,
OK, trying to return the results from two SQL statements into a DataSet using SqlDataAdapter. The SELECT statements query the same table but are looking for different records based on the date that the records were inserted - the 1st query looks for records fro the current month and the 2nd one looks at the same records but for the previous month. The goal is to be able to do some math within a repeater and get the difference between the two records.
Sounds easy enough and it has worked for me in different variations of the same idea but not this time - here's the code:
Protected Sub buildPartsReport(ByVal varHC) objConn.Open() sSQL = "SELECT ap.id,item_model,item_sn,aircraft_id,item_loc=item_type+ ' on ' +(SELECT tnum FROM T_Aircraft WHERE id=aircraft_id),apt.tot_time As endTimes,apt.tot_cycles as endCycles FROM T_Aircraft_Parts ap, T_Aircraft_Parts_Totals apt WHERE ap.id=apt.part_id AND report_date= '" & rD & "' AND item_type LIKE 'engine%';SELECT ap.id,apt.part_id,apt.tot_time as startTimes,apt.tot_cycles as startCycles FROM T_Aircraft_Parts ap, T_Aircraft_Parts_Totals apt WHERE ap.id=apt.part_id AND report_date= '" & oldRD & "' AND item_type LIKE 'engine%'" Dim objCommand As New SqlDataAdapter(sSQL, objConn) DS = New DataSet() objCommand.Fill(DS) Repeater1.DataSource = DS Repeater1.DataBind() DS.Dispose() objCommand.Dispose() objConn.Close() End Sub
Sorry if it wrapped a bit. The "rD" and "oldRD" are the variables for the date ranges (currently set to static numbers for testing). I'm getting the following error when I run this on an ASP.Net page:
System.Web.HttpException: DataBinding: 'System.Data.DataRowView' does not contain a property with the name 'startTimes'.
The code works fine when run via the Query Tool on the SQL server (SQL 2005 Std) though it produces two distinct "tables" which I'm guessing is the problem. I've tried variations on the code including creating a 2nd dataset and then attempting a merge (no joy) and I've tried the ".TableName" route but it complains about trying to add the tablename twice.
Thoughts? I need to get this to work - it is part of a reporting component for an application that I'm developing and I'm stuck. Thanks as always...
I'm new to SQL stored procedures, but I'm looking to be able to select order by statement.
declare @OrderBy
@OrderBy = 'first_name'
Select first_name,last_name from table1
Union
Select first_name,last_name from table2
if @OrderBy = 'first_name' begin
Order By first_name
else
Order By last_name
end
You'll have to excuse my if statement if the syntax is incorrect (used to only writing asp ifs :P). Thanks for any help
hi
first of all is it possible? if so, what am i doing wrong with this
INSERT into TB2
(
ClientCode,
EngagementCode,
EngagementDescription
)
SELECT
(SELECT dbo.tarCustomer.CustID
FROM dbo.tPA00175 INNER JOIN
dbo.tarCustomer ON dbo.tPA00175.CustKey = dbo.tarCustomer.CustKey INNER JOIN
dbo.tPA00007 ON dbo.tPA00175.intJobKey = dbo.tPA00007.intJobKey),
NULL,
SELECT
(SELECT dbo.tPA00175.chrJobNumber
FROM dbo.tPA00175 INNER JOIN
dbo.tarCustomer ON dbo.tPA00175.CustKey = dbo.tarCustomer.CustKey INNER JOIN
dbo.tPA00007 ON dbo.tPA00175.intJobKey = dbo.tPA00007.intJobKey)
the first select statement for works fine, but the second one and all after i get a syntax error near 'select'.
this is just a shortened version of the statement. how would i run select statements for a table to be inserted into with different column names. also with items that are hard coded like the 'null'. thanks
tibor
Hi,
I'm having problems with a stored procedure, that i'm hoping someone can help me with.
I have a table with 2 columns - Username (varchar), LastAllocation (datetime)
The Username column will always have values, LastAllocation may have NULL values. Example
Username | LastAllocation
------------------------
Greg | 02 October 2005 15:30
John | 02 October 2005 18:00
Mike | <NULL>
My stored procedure needs to pull back a user name with the following criteria:
If any <NULL> dates send username of first person where date is null, sorted alphabetically, otherwise send username of person with earliest date from LastAllocation
Then update the LastAllocation column with GETDate() for that username.
This SP will be called repeatedly, so all users will eventually have a date, then will be cycled through from earliest date. I wrote an SP to do this, but it seems to be killing my server - the sp works, but I then can't view the values in the table in Enterprise Manager. SP is below - can anyone see what could be causing the problem, or have a better soln?
Thanks
Greg
------------------------------------------------------------------------------
------------------------------------------------------------------------------
CREATE PROCEDURE STP_GetNextSalesPerson AS
DECLARE @NextSalesPerson varchar(100)
BEGIN TRAN
IF (SELECT COUNT(*) FROM REF_SalesTeam WHERE LeadLastAllocated IS NULL) > 0
BEGIN
SELECT TOP 1 @NextSalesPerson = eUserName FROM REF_SalesTeam WHERE LeadLastAllocated IS NULL ORDER BY eUserName ASC
END
ELSE
BEGIN
SELECT TOP 1 @NextSalesPerson = eUserName FROM REF_SalesTeam ORDER BY LeadLastAllocated ASC
END
SELECT @NextSalesPerson
UPDATE REF_SalesTeam SET LeadLastAllocated = GETDATE() WHERE eUserName = @NextSalesPerson
COMMIT TRAN
GO
My goal is to run a bunch of select statements from different tables in one database and have them all insert to the same columns/table in the new database. Do I need a new data source for each statement, or is there a way to run all the statements in one set seeing as they all have the same destination. I keep receiving the SQL statement improperly ended error when trying.
View 5 Replies View RelatedI believe we can you multiple statements in stored procedures?
Suppose I have a stored procedure and I pass parameters to this SP.
What I am aiming for is to pass some values to the stored procedure, use a select statement to retrieve some values, then have two update statements as below. Updating the same table but with opposite values, both passed as a parameter and retrived, as given below:
CREATE sp_temp_proc
@order_id int,
@order_position int,
@temp_order_id OUTPUT
@temp_order_position OUTPUT,
SELECT order_id AS temp_order_id
FROM <TABLE> WHERE order_position < @order_position
@temp_order_id = temp_order_id
UPDATE <TABLE> SET order_position = @order_position WHERE order_id =
@temp_order_id
UPDATE <TABLE> SET order_position = @temp_order_position WHERE order_id = @order_id
Hi!I got 2 stored procedure, proc1 executes proc2,proc2 does some updates and inserts on different tables ...proc1:ALTER PROCEDUREASexecute proc2SELECT * FROM tblFoo______________________my problem is, that when executing proc1, I receive the message:"THE SP executed successfully, but did not return records!"But I need the resultset from "SELECT * FROM tblFoo" that is executedat the end of proc1.I'm not sure, but I think that I solved a similira problem with "setnocount on", I put it into both SP, but it's still the same ... noresultset ...How can I display "SELECT * FROM tblFoo" within a SP, where SQLstatements are executed before?!Thank you!
View 1 Replies View RelatedI have a SP that has the correct syntax. However when I run my web-app it gives me this error: "Only one expression can be specified in the select list when the subquery is not introduced with EXISTS. "
The procedure takes in three parameters and retrieves 23 values from the DB to display on my form.
Any ideas?
I am seeking a syntax example for executing multiple T-SQL statements in a single stored procedure. For example, I would like to insert a new client record and immediately insert an associated household record. I don't want to have to hit the database twice to accomplish this, and I prefer not to use a trigger.
View 1 Replies View RelatedI have nested a Stored Procedure within a stored procedure. The nested stored procedure ends in a select statement. What I'd like to do is either capture the results of the select statement (it will be 1 row with 3 columns, I only need the contents of first column), or suppress the select statement from displaying in the final results of the Stored Procedure it is nested in.
Is there any way to do either of those?
I need to create a SQL Server Stored Proc that will handle a variable number of Or conditions. This is currently being done with a MS Access Query as follows
Do Until rst.EOF
myw = myw = "(rst!Field1 <> 0) OR (rst!Field1 <> 1) "
Loop
mysql = "UPDATE Table SET Field2 = 1 WHERE " & myw
The above code is very simplified.
I Want to create a stored proc to do this but I cannot send it the SQL to the Stored Proc (or can I) so I need to use parameters instead. I want to do something like
Do until rst.EOF
Set cmd = MakeStoredProc("sp_Table_UpdateField2_ForField1")
Set prmField1 = cmd.CreateParameter("Field1", adInteger, adParamInput, , rst!Field2)
cmd.Parameters.Append Field1
cmd.Execute
Loop
Again the above is very simplified. So how can you get the the SQL for the Stored Proc for something like the following from a loop
WHERE = (Field1 <> 0) OR (Field1 <> 1) OR (Field1 <> 2) ...
Thanks in advance for your help
In my SPs, I commonly have a situation, where a SELECT statement gets a single scalar value (e.g. SELECT Name FROM Employee WHERE id=@id) from a table.
Because the result is still a relation, I cannot process it directly or assign the result to a variable
(like set @name = SELECT Name FROM Employee WHERE id=@id)
So, how can I process the results of the statement in this case.
In some other cases, the result is actually a relation. And I want to iterate over all rows, processing each row's columns.
(I know this smells of ADO.NET, but how can I help it if I am coming from that background)...
The point is I want to do all this in T-Sql on server side!!!
I just want to do this (shortened example):
Select hours from GetBaseStoredProc '10/01/2004' Where ReasonId = 1
where GetBaseStoredProc is a stored procedure that takes a date parameter and contains a select sql statement like:
select reasonId, hours from my table where mydate = @myDate
(in reality, it's a much larger and more complicated statement, just using this as an example)
I guess I'm treating my storedProc like a view. If worse comes to worse, I suppose I could create a view (would rather not), but I'm wondering if what I want to do is possible, and I'm just not using the right syntax.
Many thanks - (a former Oracle dev)
i have a vb app that is retriving data from an sql db using ado. i have a qry save in my db. i want to select from this qry where x in (1,2,3,4). i don't know how many values i will be putting into my where in statment. it could be one value or 100 values. below is my code. what i would like to do is pass one paramater to my stored proc and then break it up and use it in my select.
my desired result is as follows
-----------------------------------------------
declare cnt int
declare TempFulLString nvarchar(5000)
declare TempStyleFID int
TempFulLString = @str_TempString
select * from QryPicking_Slip_Fill_Listview1 where stylefid in (
While TempFulLString <> ''
begin
cnt = InStr(1, TempFulLString, ',')
TempStyleFID = Left(TempFulLString, (cnt))
TempFulLString = Right(TempFulLString, (Len(TempFulLString) - cnt))
TempStyleFID + ','
end
)
-----------------------------------------------
I'm trying to call a stored proc with parameters without using EXEC statement and with only using a SELECT statement. I have the stored proc and need to call it from a 3rd party application which provides an interface to SQL server and does not support EXEC statements, but only SELECT statements. Is there a way this can be done?
Any enlightenment is appreciated.