Hi
I have a .db file from another server and i am trying to install it at home and get this lengthy error message ( 9 lines long )
Microsoft SQL-DMO ODBC SQL STATE 42000
The physical name ( path blah blah may be wrong)
how do i change the physical path of the .db file i'm trying to restore??
thx
I did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.
I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error :
Msg 33111, Level 16, State 3, Line 1
Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
I want to restore a database (from an encrypted .bak file) - but *not* over the live original if you take my meaning. Encryption is the standard AES-256 that comes with Sql Server 2014 btw. I don't want the original touched/altered in any way. I would like to capture a success message if possible.I can extract the physical device name of the database in question using the following code:
SELECT physical_device_name, *
FROM msdb.dbo.backupmediafamily
WHERE media_set_id =(SELECT TOP 1 media_set_id
FROM msdb.dbo.backupset
WHERE database_name='MyDatabase'
AND type='D'
ORDER BY backup_start_date DESC)
I would like if the newly restored database was rename to something different than 'MyDatabase' (as shown above) and has different logs than the original. If possible, and capture a success message when restored.
I did a full backup of a db from one server(Express2005) and trying to restore it to a different instance of SQL2005 on the same development machine. (Also had some fulltext columns if that means anything)
Many failures but finally got it to report all was successful except the icon in Object Explorer shows (Restoring...) with no indication of any real activity going on. It's a tiny database with hardly any data in it.
Just not sure what the heck is going on there. It also won't let me into the database until this the (Restoring...) goes away.
Any advice on how to get this thing finished out?
I have two servers (same config) I am trying to restore a database that I backed up on one server to the other. The method I used was as follows: I backed up the database to disk.
Copied to the Disk of the second server.
When I try to restore I get the following message.
"The backup set holds a backup of a database other than the existing "database name" database.
What am I doing wrong?
i'm attempting to restore a 7.0 database to a new server useing
the sql server enterprise manager. If i choose to restore from
device, i get an ODBC SQL State 42000 error and a suggestion to use the
"WITH MOVE OPTION". If i choose to restore via the database option, it
doesn't recognize my backup file in the dropdown list of backup files
to restore. I would like to use the enterprise manager if possible.
Any suggestions would be appreciated.
Hi!
I attempted to backup a database on server x and restore it on a database on server y. The details are as follows.
Server X
Database name : dbx
Size :263.88MB (Unrestricted filegrowth option set)
Logical files : dbx_data, dbx_log
Physical files : e:mssql7datadbx_data.mdf, f:databaselogsdbx_log.ldf
Server Y
Database name : dby
Size :1MB (Unrestricted filegrowth option set)
Logical files : dby_data, dby_log
Physical files : d:mssql7datadby_data.mdf, d:mssql7datadby_log.ldf
I created a full database backup of dbx on server x at the location, f:ackupsdbx_083099_10.30AM. The size of the file is 272MB. I zipped the file. Copied the file, dbx_083099_10.30AM.xip over to d:ackups of server y. I unzipped the file at server y to the location, d:ackupsdbx_083099_10.30AMdbx_083099_10.30AM.
I now tried to restore this backup on server y using the statement,
restore database dby from disk = 'd:ackupsdbx_083099_10.30AMdbx_083099_10.30AM
with replace,
move 'dbx_data' to 'd:mssql7datadby_data.mdf',
move 'dbx_log' to 'd:mssql7datadby_log.ldf'
I get the following errors :
Server: Msg 3257, Level 16, State 1, Line 1
There is insufficient free space on disk volume 'd:' to create the database. The database requires 3219128320 additional free bytes, while only 2047102976 bytes are available.
Server: Msg 3013, Level 16, State 1, Line 1
Backup or restore operation terminating abnormally.
Error log shows,
1999-08-30 10:28:54.68 kernel BackupDiskFile::OpenMedia: Backup device 'd:ackupdbx_083099_10.30AMdbx_083099_10.30AM' failed to open. Operating system error = 1326(Logon failure: unknown user name or bad password.).
(or)
Cannot open backup device, 'd:ackupdbx_083099_10.30AMdbx_083099_10.30AM'. Device error or device offline. See SQL Server error log for more info.
Backup or restore operation terminated abnormally.
How can I solve this problem ?
Praveena
Hi, I have two sql server 2000. one of the server has a production database names xyz_db I make a full backup of the database then move the backup file xyz_db.BAK to the other sql server and run the restore process, I get an identical database in the second sql server. Is there any issues that I should be aware of in doing such a thing?
Ali
suppose we are restoring the database to a new server, the logins are getting created.
So when an user want to login to this new database , what ever he used before to getinto that database should have to use the same password.??
So when we restore a database only, tables , logins are created, or what are the other things getting craeted like stored proc, jobs???
thanks in advance
Hi Guru's,
Please assist,
I have a backup copy of my database from the old server but now when I restore it on the new sever these are the steps I used:
I created the new db on the new server then gave it the same name as the database that I backed up the restored
but now when i check it's got system tables rather then user tables
where did I go wrong?
Thanx.
I m a student and i m doing a project on Datamining. I have to mine data of a company. the issue is that the company uses Microsoft SQL server as there DBMS. they backed up there data and gave it to me with schema (schema is separate and data backup is a backup generated through the backup option in SQL server Enterprise Manager). Now i created tables through query analyzer (i think) and then through enterprise manager i tried to restore that backup on my personal pc and i get an error .
the image is attached
see the image for the error
http://img.photobucket.com/albums/v54/kaboomagic/error.jpg
Hello everyone.
Pretty new to SQL Server and i've run into some trouble with something I am attempting to do.
Basically, we imported one of our databases on one of our SQL Servers to a new sql server that we just setup. That went ok with no problems. The DB is now in the new SQL Server.
Now, we need to copy the contents of a second DB from the original server into this new sql server DB. For reference:
We imported a DB Called: siebeldb
We want to import/overwrite another DB into that same DB. We backedup the DB and moved the file to the new SQL server.
So:
Import/Restore: sbprd01(a backup file) into siebeldb
I hope that makes sense.
I have the following command that I am trying to execute in the SQL Query analyzer:
RESTORE DATABASE siebeldb
FROM DISK='C:Documents and SettingsAdministratorDesktopsiebelprddb092509.bak'
WITH MOVE 'siebelprddb_Data'
TO 'C:Program FilesMicrosoft SQL ServerMSSQLDatasiebeldb_Data.mdf',
MOVE 'siebelprddb_Log'
TO 'C:Program FilesMicrosoft SQL ServerMSSQLDatasiebeldb_Log.mdf',
REPLACE
It is running right now, but seems to be running into errors. I just added the 'REPLACE' option according to the t-sql reference guide.
Does my script look ok? Am I doing anything wrong?
Thanks,.
Sektor
if you can restore a database to Server B using Server A as the service. Meaning we would issue the command on Server A but somehow point to Server B as where we want the restore to happen.
The backup file would be in a location independent of both servers.
I would like to know if it is possible to make a backup of a database in a SQL Server 2005 server and restoring it in a SQL Server 2000 server.
Thanks a lot in advanced.
I have clustered SQL server machines(SSserver1 and SSserver2). I need to restore a database from another standalone server to this clustered environment. In this case do I need to restore the DB on both the nodes that are part of the clustering(SSserver1 and SSserver2) or Just can I do it on one of them?
View 5 Replies View RelatedIf I restore a SQL 2000 DB into 2005 it upgrades it for me.
When restoring a DB to a new server/instance of SQL, in SQL 2000 I had to carry out the sp_changedbowner procedure after the restore was complete.
Is the equivalent procedure when restoring a SQL 2000 DB to 2005 to go to the schema for the restored database, find the schema with the name of the SQL 2000 db owner and change the schema owner?
OR alternatively run the following query where mark is the db owner in 2000 and lladmin in the new user in 2005 ;
ALTER AUTHORIZATION ON SCHEMA::mark TO lladmin;
GO
I have been restoring database backup from server1 to Server2 and both database name is same till today. But I had an error today. I verified path, location and access everything is there but no luck to resolve.
CODE:-
USE Master;
GOÂ
SET NOCOUNT ON
-- 1 - Variable declaration
DECLARE @dbName sysname
DECLARE @backupPath NVARCHAR(500)
DECLARE @cmd NVARCHAR(500)
DECLARE @fileList TABLE (backupFile NVARCHAR(255))
DECLARE @lastGEFullBackup NVARCHAR(500)
DECLARE @backupFile NVARCHAR(500)
DECLARE @GEFullPath NVARCHAR(1000)
[code]....
Hi!
I'm a beginner w ith SQL Express and am having some problems. I am using 2005 SP1 and installed the SQL Server Management Studio Express as well. I have a backup from a SQL Server 7.0 database that I am trying to restore into my database using the management studio. When I try to restore from the file into my database, I get the error,
System.Data.SqlClient.SqlError: The backup of the system database on the device D:GMBeta2Local.bak cannot be restored because it was created by a different version of the server (7.00.1063) than this server (9.00.3033). (Microsoft.SqlServer.Express.Smo)
Is this true? Is there any way for me to get this data into my SQL Server 2005 express on my laptop?
Dear All,
I am experiencing a problem that, after i have made a backup database file in SQL Server version (9.00.1090), when i restore the database in a newer SQL Server 2005 version(9.00.1399), an error occurs.
The error is:
Restore failed for Server 'demo'. (Microsoft.SqlServer.Smo)
Additional information:
System.Data.SqlClient.SqlError: The database was backed up on a server running version 9.00.1090. That version is incompatible with this server, which is running version 9.00.1399. Either restore the database on a server that supports the backup, or use a backup that is compatible with this server. (Microsoft.SqlServer.Smo)
Anyone can tell me how i could fix this?
Why would it happen?
Thank you very much
Regards,
George
I am moving a database from one server to another. I am going to replace the old server to the new one. I heard that you can move the datfiles and put them in the same directory, and sql server will pickup the datafiles based on the system tables. Is this possible, and what are the steps to get this to work. Thanks for the help in advance.
View 4 Replies View RelatedHi All,
I have an issue that's stopping me restoring a database on SQL Server Express 2005 running under Windows Vista. I'm installing a system that I've used several times before on other systems and part of the installation procedure is to use the 'restore' function to install a database from a backup file. So I'm essentially restoring but to a db that doesn't yet exist in my SQL Server, this normally goes without a hitch. However on attempting this on a Vista system, I get the following error message -
System.Data.SqlClient.SqlError: The operating system returned the error '5(error not found)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLiCasework.mdf'. (Microsoft.SqlServer.Express.Smo)
where iCasework is the name I've given in the restore dialogue as the DB to restore to (which as I said, doesn't exist at the moment).
Things I've tried so far: -
I have a feeling this is down to a permissions problem, so I've tried the following already
1) Running Management Studio Express as Administrator - exact same error message
2) During the initial install, I set up the default admin user to use SQL Server authentication, having read threads about vaguely similar errors I used the Surface Area Config tool to add my windows login as an admin with admin rights and tried connecting to the Server with those credentials then running the restore - exact same error message
and
3) I also tried manually creating an empty db called iCasework and then restoring the external backup into that existing backup, which just gave a different error stating that the backup file didn't match the structure of the existing db. I could create the whole db structure manually but that would entirely negate the purpose of restoring from the backup and, more to the point, has never been necessary on any other system we've done this one.
Has anyone got any ideas that I could try next please?
Hey guys
We currenlty have SQL Server 2000 installed inhouse for testing. A client has given us a backup of their 2005 database and i'm wondering if the restore will work into 2000, or any issues i should be aware of. Should i just install msde locally on my machine and restore the database?
thanks
Hi There
Can U help me?
Have a MDF file from SQL7 and I attempt to attach the databse to sql 2000.
However, keep getting this error when Accessing the database.
Cannot Open Database 'dbname' from version 524. Upgrade database to latest version.
Is there a work-around to solve this problem
Thanks in advance
While doing the restore of the database is it better to copy the backup file locally and restore or restore from the network path is good option?
What kind of the problems we may get restoring the backup from the network path?
I am restoring a database with 10yrs worth of data which have monthly partitions but i would like to keep only 5yrs of data after the restore is done, what is the best/faster approach to delete the 5yrs data without deleting the partitions as that may cause the db in accessible.
View 9 Replies View RelatedEvery once in a while a scheduled restore of a production database backup to a development server will fail with the following error.
RESTORE cannot operate on database 'XXX' because it is configured for database mirroring or has joined an availability group
While it is true the production database is involved in database mirroring, the development server does not have database mirroring enabled. This error tells me something within the backup is telling the development server the database is configured for database mirroring.
However the perplexing part for me is that we only receive this error maybe 5% of the time, if that, and only on a couple of our databases. We have numerous other restores of mirrored production databases to development servers that have never produced this error. So my question is what is causing this error to occur, and why is it not happening all of the time? We get around this error by deleting the DEV database and re-running the restore job.
When I run:select * from testtableI get this error message:Invalid object name 'testtable'.However, if I run:select * from testuser.testtableIt works. I'm logged in as testuser, and testuser is the databaseobject owner and tableowner. This was a restored database from adifferent server in SQL Server 2000. The testuser login was in theprevious database. I created the same login in this new test databaseand made it database owner.I've also tried running: sp_change_users_login 'Update_One','testuser', 'testuser'It completed successfully but I still get:select * from testtableInvalid object name 'testtable'.I've also tried creating a different user and making it database ownerand when I change table object owner to this new user, I still get thesame problem. I need to specify:select * from newtestuser.testtableEven though I'm logged in as newtestuser.I also then tried changing table owner to dbo. This seems to worklogged in as either user, but I want to have the tables owned by theuser not dbo. How can I resolve this?Any help would be appreciated.Erin
View 1 Replies View RelatedI have a database with deployed CLR assembly on SQL 2008. I recently took a backup for the database and restored it on SQL 2012 server. Everything worked fine except very strange working of CLR assemblies functions.The result of the function is very odd. It manipulates the numeric string and return the result. It is returning very strange result on SQL 2012 as compared to SQL 2008.Example SQL 2008 ManipulateString('1234') returns 2345 On SQL 2012 the same call returns 1155.I am also trying to deploy the same assembly to SQL 2012 server database. I have successfully register the assembly, but the database do not list the exposed methods.
View 5 Replies View RelatedI need to recover some data in a table but i'm not 100% sure the right way to do this safely.
I'll need to query the two tables to compare the before and after but how do i go about restoring/attaching the backup database to SQL without causing conflicts?
If I restore, I assume this would just overwrite which is obviously the worst thing that can happen. if i attach the backup, how does this affect the current live DB? how do i make sure that it's not getting accessed and mistaken for the live DB?
The SQL server is 2008 R2 running as a VM.
Hello,If I backup and restore an express database to sql server 2005 standard, will there still be limitations in regards to the database size, cpu...etc.? Thanks,Jon
View 1 Replies View RelatedI need to start encrypting several fields in a database and have been doing some testing with a test database first. I've run into problems when attempting to restore the database on either the same server (but different database) or to a separate server.
First, here's how i created the symmetric key and encrypted data in the original database:
create master key
encryption by password = 'testAppleA3';
create certificate test
with subject = 'test certificate',
EXPIRY_DATE = '1/1/2010';
create symmetric key sk_Test
with algorithm = triple_des
encryption by certificate test;
open symmetric key sk_Test decryption by certificate test;
insert into employees values (101,'Jane Doe',encryptbykey(key_guid('sk_Test'),'$200000'));
insert into employees values(102,'Bob Jones',encryptbykey(key_guid('sk_Test'),'$500000'));
select * from employees
--delete from employees
select id,name,cast(decryptbykey(salary) as varchar(10)) as salary from employees
close all symmetric keys
Next I backup up this test database and restore it to a new database on a different server (same issue if restore to different database but on same server).
Then if i attempt to open the key in the new database and decrypt:
open symmetric key sk_Test decryption by certificate test;
I get the error: An error occurred during decryption.
Ok, well not unexpected, so reading the forums, i try doing the below first in the new database:
ALTER MASTER KEY ADD ENCRYPTION BY SERVICE MASTER KEY
Then I try opening the key again and get the error again:
An error occurred during decryption.
So then it occurs to me, maybe i need to drop and recreate it so i do
drop symmetric key sk_test
then
create symmetric key sk_Test
with algorithm = triple_des
encryption by certificate test;
and then try to open it.
Same error!
So then i decide, let's drop everything, the master key, the certificate and then symmetric key:
drop symmetric key sk_test
drop certificate test
drop master key
Then recreate the master key:
create master key
encryption by password = 'testAppleA3';
Restore the certificate from a backup i had made to a file:
CREATE CERTIFICATE test
FROM FILE = 'c:storedcertsencryptiontestcert'
Recreate the symmetric key again:
create symmetric key sk_Test
with algorithm = triple_des
encryption by certificate test;
And now open the key only to get the error:
Cannot decrypt or encrypt using the specified certificate, either because it has no private key or because the password provided for the private key is incorrect.
So what am I doing wrong here? In this scenario I would appear to have lost all access to decrypt the data in the database despite restoring from a backup which restored the symmetric key and certificate and i obviously know the password for the master key.
I also tried running the command
ALTER MASTER KEY ADD ENCRYPTION BY SERVICE MASTER KEY
again but this does not resolve the issue.
Thx.
I have a Subscriber database updated using transactional
replication and want to create a copy for development & testing. The Distribution database is running on the
same 2005 instance as the Subscriber and the Publication database on another
server running SQL Server 2005.
If I use a TSQL script to run the restore, the database is
restored to a usable state but I get the following messages:
Msg 15247, Level 16, State 1, Procedure
sp_MSrepl_check_job_access, Line 112
User does not have permission to perform this action.
The replication agent job [job name] was not removed because
it has a non-standard name; manually remove the job when it is no longer in use.
(I€™ve removed the job name from the message)
RESTORE DATABASE successfully processed 46219 pages in
935.413 seconds (0.404 MB/sec).
It looks like an attempt is being made to restore
replication information too. I note that
the RESTORE statement has a KEEP_REPLICATION options which implies (I would have
thought) that by default the replication information is not be restored.
Incidentally, before implementing replication, backing up
the live database and restoring the backup to a new database took < 7
minutes but running the same process with a Subscriber database backup takes
about 15 minutes.
I€™d be interested to know if anyone has any idea what I€™m
overlooking or doing wrong.
ThanksTim
1) We have got the database dump (.bak) file in one machine and we need to restore this to another machine where the SQL server (version 7) is running. But in the restore option there is no way to choose any mapped or shared drives in remote machine. Any pointer to resolve this problem?
2) Can you set up a database if you have the .mdf and .ldf files?