Hi
I'm using an sqldatasource control in my aspx page, and then executing it from my code behind page (SqlDataSource1.Insert()), how do i retrieve the number of rows (@@rowcount) which have been inserted into the database and display it in my aspx page. I am using a stored procedure.
thanks
Hi,I'm having trouble getting a stored procedure to return a single
integer value. Here's a short
version:~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~set ANSI_NULLS ONset
QUOTED_IDENTIFIER ONGOALTER PROCEDURE
[dbo].[Perm_Import_CJ]AS/* bunch of stuff removed */DECLARE
@NoCategory intSELECT @NoCategory = COUNT(*) FROM table WHERE CategoryID IS
NULL/* print @NoCategory */RETURN
@NoCategory~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If I uncomment "print
@NoCategory" it prints exactly the number it's supposed to, so there is no
problem with any of the queries in the stored procedure. Then, in the code,
this is what I'm doing:~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Dim dbConn
As New
SqlConnection(WebConfigurationManager.ConnectionStrings("ConnectionName").ConnectionString)Dim
cmd As New SqlCommand("StoredProc", dbConn)cmd.CommandType =
CommandType.StoredProceduredbConn.Open()Dim intNoCategory As Integer =
CInt(cmd.ExecuteScalar())dbConn.Close()~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~But,
and here's the problem ---> Even though @NoCateogry prints as the correct number, by the time it gets to intNoCategory in the code, it is ALWAYS zero.I have no idea what I am doing wrong.
Thanks in advance for any help!Casey
I need a stored procedure to return a value to my .NET app (ascx). The value will tell the app if the stored procedure returned any values or not. For example, if the Select SQL statement in the stored procedure returns no rows, the stored procedure could return a zero to the .NET app, otherwise it could return the number of rows or just a one to the .NET app.Anyone know how to do this?Thanks!
View 1 Replies View RelatedHi. I'm sorry to bother all of you, but I have spent two days lookingat code samples all over the internet, and I can not get a single oneof them to work for me. I am simply trying to get a value returned tothe ASP from a stored procedure. The error I am getting is: Item cannot be found in the collection corresponding to the requested name orordinal.Here is my Stored Procedure code.set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGoALTER PROCEDURE [dbo].[sprocRetUPC]@sUPC varchar(50),@sRetUPC varchar(50) OUTPUTASBEGINSET NOCOUNT ON;SET @sRetUPC = (SELECT bcdDVD_Title FROM tblBarcodes WHERE bcdUPC =@sUPC)RETURN @sRetUPCENDHere is my ASP.NET code.Protected Sub Page_Load(ByVal sender As Object, ByVal e AsSystem.EventArgs) Handles Me.LoadDim oConnSQL As ADODB.ConnectionoConnSQL = New ADODB.ConnectionoConnSQL.ConnectionString = "DSN=BarcodeSQL"oConnSQL.Open()Dim oSproc As ADODB.CommandoSproc = New ADODB.CommandoSproc.ActiveConnection = oConnSQLoSproc.CommandType = ADODB.CommandTypeEnum.adCmdStoredProcoSproc.CommandText = "sprocRetUPC"Dim oParam1Dim oParam2oParam1 = oSproc.CreateParameter("sRetUPC",ADODB.DataTypeEnum.adVarChar,ADODB.ParameterDirectionEnum.adParamOutput, 50)oParam2 = oSproc.CreateParameter("sUPC", ADODB.DataTypeEnum.adVarChar,ADODB.ParameterDirectionEnum.adParamInput, 50, "043396005396")Dim resres = oSproc("sRetUPC")Response.Write(res.ToString())End SubIf I put the line -oSproc.Execute()above the "Dim res" line, I end up with the following error:Procedure or function 'sprocRetUPC' expects parameter '@sUPC', whichwas not supplied. I thought that oParam2 was the parameter. I was alsounder the assumption that the return parameter has to be declaredfirst. What am I doing wrong here?
View 8 Replies View Relatedhi all, lets say i have this insert command being executed from C# to a SQL Db. //store transaction log
SqlCommand cmdStoreTrans = new SqlCommand("INSERT into Transactions(ImportID,ProfileID,RowID) values (@ImportID,@ProfileID,@RowID);",conn);
cmdStoreTrans.Parameters.Add("@ImportID",importId);
cmdStoreTrans.Parameters.Add("@ProfileID",profileId);
cmdStoreTrans.Parameters.Add("@RowID",i);
try
{
conn.Open();
cmdStoreTrans.ExecuteNonQuery();
conn.Close();
}
catch(SqlException ex)
{
throw(ex);
}I need the new Identity number of that record added. how can i get that within THIS Sqlcommand. Currently im closing the connection, creating a new command with 'SELECT MAX(id) from transactions" and getting the value that way, im sure there is a easier way keeping it all within one command object? someone mentioned using something liek @@Identity any help appreciatedTIA, mcm
How do I return a value in a stored procedure? I want to return a value for TheQuarterId below but under all test conditions am only getting back a negative one. Please help! create PROCEDURE [dbo].[GetQuarterIdBasedOnDescription]
(
@QuarterString nvarchar(10),
@TheQuarterId int output
)
AS
BEGIN
SELECT @TheQuarterId = QuarterId from Quarter WHERE Description=@QuarterString
END
I am using VS 2006, asp.net and C# to call a stored procedure. I want to return a value from the stored procedure into a variable in my C# code. Currently this is not working for me, and I can not figure out whatthe problem is? Can someone please help me out?
I really don't think the problem is in my stored procedure. I can right click on the stored proc and run it withsuccess. If I trace into the C# code though only a negative one (-1) is returned.
On line 5 I have tried the alternate lines of code but this has not worked for me.
mySqlCommand.Parameters["@TotalRecords"].Direction = ParameterDirection.Output; mySqlCommand.Parameters["@TotalRecords"].Direction = ParameterDirection.ReturnValue;
Can someone please help me out. I have spent to much time trying to figure this one out.
// C# code to call stored proc.1 try2 {3 SqlCommand mySqlCommand = new SqlCommand("[GetRecordsAssociatedWithRealtor]", mySqlConnection);4 mySqlCommand.Parameters.Add("@RealtorId", SqlDbType.Decimal, 10).Value = RealtorId;5 mySqlCommand.Parameters["@TotalRecords"].Direction = ParameterDirection.InputOutput;6 mySqlCommand.CommandType = CommandType.StoredProcedure;7 RecordsAssociatedWithRealtor = mySqlCommand.ExecuteNonQuery();8 }
// Stored procedure below.USE [REALTOR]GO/****** Object: StoredProcedure [dbo].[GetRecordAssociatedWithRealtor] Script Date: 10/18/2007 13:15:18 ******/SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOCREATE PROCEDURE [dbo].[GetRecordAssociatedWithRealtor]( @RealtorId int, @TotalRecords int output)AS BEGIN DECLARE @HouseDetailRecords int DECLARE @RealtorRecords int SELECT @HouseDetailRecords= RealtorId from Realtor where RealtorId=@RealtorId SELECT @RealtorRecords = RealtorId from ConstructionDetail where RealtorId=@RealtorId SET @TotalRecords=SUM(@HouseDetailRecords+@RealtorRecords) RETURN @TotalRecordsEND
ok I have a stored procedure in my MS-SQL Server database.
It looks something like this.....
CREATE PROCEDURE updatePCPartsList
(
@Descriptionvarchar(255),
@ManCodevarchar(255),
@ProdCodevarchar(255),
@Pricedecimal(6,2),
@Commentsvarchar(255)
)
AS
declare @IDFound bigint
declare @LastChangedDate datetime
select @LastChangedDate = GetDate()
select @IDFound = PK_ID from PCPartsList where ProdCode = @ProdCode
if @IDFound > 0
begin
update PCPartsList set Description = @Description, ManCode = @ManCode, ProdCode = @ProdCode, Price = @Price, Comments = @Comments, LastChanged = @LastChangedDate where PK_ID = @IDFound
end
else
insert into PCPartsList (Description, ManCode, ProdCode, Price, Comments, LastChanged) values(@Description, @ManCode, @ProdCode, @Price, @Comments, @LastChangedDate)
GO
It executes fine so I know i've done that much right....
But what i'd like to know is how I can then return a value - specifically @LastDateChanged variable
I think this is a case of i've done the hard part but i'm stuck on the simple part - but i'm very slowly dragging my way through learning SQL.
Someone help?
Good morning, all,
OK, I have read a ton of posting on this issue, but either they don't give enough information or they are for packages which use the Execute SQL command, whereas I am using the OLE DB Command Data Flow Transformation.
I have an Excel spreadsheet that we are receiving from agencies with rows of client data which I have to load into an application that is ready to go live. I also have a stored procedure spClientsInsertRcd, which was written for the application. In the normal flow of the application, the stored procedure is called from a Coldfusion page, which does some processing prior to calling it. So, I have written a 'wrapper' stored procedure, spImportAgencyData, which does the processing and then calls the spClientInsertRcd.
My dataflow has the following components:
An Excel Source, containing my test data, consisting of just one row of data,
which points to a
Derived Column Transformation, which reformats the SSN and adds a user variable, named returnValue with an Expression value of @[User::returnvariable] set to a four-byte signed integer, which (i think) I need to get the value out of the stored procedure.
which points to a
Data Conversion Transformation, which takes care of all the datatype conversions
which points to a
OLE DB Command, which contains the following as the SQL Command:
exec ?= spImportAgencyData ?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?
In the OLE DB Command, I have mapped returnValue, my user variable to @RETURN_VALUE.
Right now, I am in initial testing. The dataflow shows that it is succeeding, but my one data record for testing is not getting inserted. I need to get the value of returnValue to figure out what is happening.
How do I get the value of the returnValue? I have tried putting a recordset destination after the OLE DB command, but that just gives me the data that went into the OLE DB Command.
Thanks,
Kathryn
I have a stored procedure that takes a computer name (nvarchar) and either updates a time stamp in a matching row or adds a new row when no match is found based on the computer name (replicates a set of rows in another table as well in the case of not found).
When the row is unmatched, an output param (int) is set to 1 indicating it is new. When found, a zero is placed into the output parameter.
This stored procedure worked fine until we recently upgraded to SQL Server Express (2005).
C++ code:
_bstr_t conn_str = CONN_STR;
conn_str += (LPCTSTR)_server_name;
try
{
_ConnectionPtr epi_conn;
_CommandPtr cmd("ADODB.Command");
_ParameterPtr param;
long addfg;
_variant_t var_addfg;
//
// connect to database
//
epi_conn.CreateInstance(__uuidof(Connection));
epi_conn->Open(conn_str,"","",adConnectUnspecified);
cmd->ActiveConnection = epi_conn;
cmd->CommandText = "qry_DBUpdWorkstation";
cmd->CommandType = adCmdStoredProc;
//
// setup stored procedure call
//
param = cmd->CreateParameter (_bstr_t("@s_computer_name"), adVarChar, adParamInput, 31);
cmd->Parameters->Append(param);
param->Value = client_name;
param = cmd->CreateParameter (_bstr_t("@l_addfg"), adInteger, adParamOutput, 4);
cmd->Parameters->Append(param);
//
// debug output
//
if (trace_fp)
{
COleDateTime cur_dt = COleDateTime::GetCurrentTime();
fwprintf(trace_fp, L"%s - clsSrvrCtrlr::UpdWorkstation 1 client=%s",
cur_dt.Format(), client_name);
fflush(trace_fp);
}
cmd->Execute(NULL, NULL, adCmdStoredProc);
var_addfg = cmd->Parameters->Item[_variant_t("@l_addfg")]->Value;
addfg = var_addfg.iVal;
//
// done with stored proc
//
epi_conn->Close();
if (trace_fp)
{
COleDateTime cur_dt = COleDateTime::GetCurrentTime();
fwprintf(trace_fp, L"%s - clsSrvrCtrlr::UpdWorkstation 2 var_addfg.vt=%d, var_addfg.iVal=%d",
cur_dt.Format(), var_addfg.vt, var_addfg.iVal);
fflush(trace_fp);
}
and the stored proc:
set ANSI_NULLS OFF
set QUOTED_IDENTIFIER OFF
GO
-- Database Version 5.5.0
ALTER PROCEDURE [dbo].[qry_DBUpdWorkstation]
@s_computer_name nvarchar(31),
@l_addfg int OUTPUT
AS
SET NOCOUNT ON
DECLARE @d_update_dt datetime
DECLARE @l_msg_cd int
DECLARE @b_view_local bit
DECLARE @b_view_global bit
DECLARE @l_alert_type smallint
DECLARE @s_sound_file nvarchar(255)
DECLARE @l_wscd int
SELECT @d_update_dt=UpdateDT
FROM dbo.tblWorkstations
WHERE ComputerNameTxt=@s_computer_name
SET @l_addfg = 0
IF @d_update_dt IS NULL
BEGIN
INSERT tblWorkstations (ComputerNameTxt, UpdateDT, OnlineFg)
VALUES (@s_computer_name, GETDATE(), 0)
SET @l_wscd = SCOPE_IDENTITY()
DECLARE msg_cursor SCROLL CURSOR FOR
SELECT SysMsgCd, ViewLocalFg, ViewGlobalFg, AlertTypeVal, SoundFileTxt
FROM tblMsgAlerts
WHERE WorkstationCd = -1
OPEN msg_cursor
FETCH FIRST FROM msg_cursor INTO
@l_msg_cd, @b_view_local, @b_view_global, @l_alert_type, @s_sound_file
WHILE @@fetch_status = 0
BEGIN
INSERT tblMsgAlerts (WorkstationCd, SysMsgCd, ViewLocalFg, ViewGlobalFg, AlertTypeVal, SoundFileTxt)
VALUES (@l_wscd, @l_msg_cd, @b_view_local, @b_view_global, @l_alert_type, @s_sound_file)
FETCH NEXT FROM msg_cursor INTO
@l_msg_cd, @b_view_local, @b_view_global, @l_alert_type, @s_sound_file
END
CLOSE msg_cursor
DEALLOCATE msg_cursor
SET @l_addfg = 1
END
ELSE
BEGIN
UPDATE tblWorkstations
SET UpdateDT = GETDATE()
WHERE ComputerNameTxt=@s_computer_name
END
The stored proc ALWAYS returns 0 but will execute the code to insert the new row when not found and replicate the rows in the second table. Any ideas, suggestions?
Thanks
I have a search stored proc which fails to return results when called by more than one user.
I have put selects in the various SPs to trace results and if I call from 3 query windows (executnig each as quickly as I can work the mouse) I get the following:
1st query returns the trace values (including correct count of temp table recs) but no result set
2nd query erturns nothing just "The command(s) completed successfully."
3rd query returns full results.
This seems to be consistent.
We are running SQL Server 7 SP1.
Just upgrading to SP2 to see if that helps.
The main SP calls other SPs to build result sets.
These use quite a few temp tables passed between SPs, parse CSV lists, join different other tables, create a SQL string to exec to do the search and get record IDs to return (no cursors).
The result set is built by a called SP using the temp table with IDs to return.
Anyone know of any problems or can suggest anything to try?
Hi everyone,
Does anyone know of a SQL stored proc that when given a operating system filename (i.e. a text file), returns the size of the file in bytes.
Thanks in advance,
Jim
What is the recommended method of returning a formatted date from a stored procedure?
The date is held in a date time field. I wish to return the date formatted as:
dd/mm/yyyy hh:mm
for display in a bound text box on a win form. JUst selecting the date and binding it to the text box shows:
dd/mm/yyyy hh:mm:ss
I do not want the :ss to show. A textbox does not have a format property (that I can see). I suppose I could create my own textbox inheriting from the standard and apply a display format property. I thought it may be easier to select as required in an sp. The textbox is read only on the form.
I was looking at:
select jobHeaders.DateTimeJobTaken AS [Job Taken],
CAST(datepart(dd,jobHeaders.DateTimeJobTaken) as char(2)) + '/' +
CAST(datepart(mm,jobHeaders.DateTimeJobTaken) as char(2)) + '/' +
CAST(datepart(yyyy,jobHeaders.DateTimeJobTaken) as char(4))
from jobHeaders
but this gives :
8 /3 /2004 with spaces.
Before looking further I thought one of you guys may have the answer.
Thanks in advance
I've got a stored proc to insert a record and return the id of the record inserted in an output param.How do I access this value in my code after the proc is executed?
param = comm.CreateParameter();param.ParameterName = "@MemberID";param.Direction = ParameterDirection.Output;param.DbType = DbType.Int32;comm.Parameters.Add(param);
try{ rowsAffected = GenericDataAccess.ExecuteNonQuery(comm);}catch { rowsAffected = -1;}
Hi!I have this table:Units -id uniqueidentified (PK), -groupName NVARCHAR(50) NOT NULL, -name NVARCHAR(50) NOT NULL, -ratio float NULL and the stored proc that simply returns all rows:ALTER PROCEDURE dbo.ilgSP_GetUnitsAS SELECT [id], [groupName], [name], [ratio] FROM [Units] ORDER BY [groupName], [name]If I select 'Show Table Data' in Visual Studio 2005 I see all rows from the table. If I 'Execute' my stored from VS 2005 I get this:Running [dbo].[ilgSP_GetUnits].id groupName name ratio -------------------------------------- -------------------------------------------------- -------------------------------------------------- ------------------------- No rows affected.(1 row(s) returned)@RETURN_VALUE = 0Finished running [dbo].[ilgSP_GetUnits].And I don't get any data in my ASP.NET application. WHY?Thanks!
View 1 Replies View RelatedHi,
I have a package that I need to loop (possibly multiple times) based on a return value from a stored procedure.
I know that in DTS you could use the return value of "execution status" to do this.
Is there a way in SSIS to loop based on a return value?
Thanks much
I am trying to use SSIS to update an AS400 DB2 database by calling a stored procedure on the AS400 using an OLE DB command object. I have a select statement running against the SQL Server 2005 that brings back 20 values, all of which are character strings, and the output of this select is piped into the OLE DB command object. The call from SSIS works just fine to pass parameters into the AS400 as long as the stored procedure being called does not have an output parameter defined in its signature. There is no way that I can find to tell the OLE DB command object that one of the parameters is an output (or even an input / output) parameter. As soon as one of the parameters is changed to an output type, I get an error like this:
Code Snippet
Error: 0xC0202009 at SendDataToAs400 1, OLE DB Command [2362]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
Error: 0xC0047022 at SendDataToAs400 1, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Command" (2362) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at SendDataToAs400 1, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0202009. There may be error messages posted before this with more information on why the thread has exited.
Information: 0x40043008 at SendDataToAs400 1, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at SendDataToAs400 1, DTS.Pipeline: Cleanup phase is beginning.
Task failed: SendDataToAs400 1
Warning: 0x80019002 at RetrieveDataForSchoolInitiatedLoans: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at Load_ELEP: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Load_ELEP.dtsx" finished: Failure.
I really need to know if the call to the AS400 stored procedure succeeded or not, so I need a way to obtain and evaluate the output parameter. Is there a better way to accomplish what I am trying to do? Any help is appreciated.
I need to call the stored procedure below. Basically what I need to know is if the query returns a record?
Note I would be happy if I could just return the number Zero if no records are returned. Can someone please help me out here?Here is my query so far in SQL Server. I just don't know how to return a value based upon the result of the records returned from the query.
GOCREATE PROCEDURE [dbo].[GetNameStatus]( @CountryId decimal, @NameId decimal, @DescriptionId decimal)AS SELECT Name.Active FROM Name INNER JOIN NameDescription ON Name.NameId = NameDescription.NameId WHERE Name.CountryId=@CountryId AND Name.NameId=@NameId AND NameDescription.DescriptionId=@DescriptionId AND Name.Active='Y'
I am just trying to capture the return code from a stored proc as follows and if I get a 1 I want the SQL Task to follow a failure(red) constrainst workflow and send a SMTP mail task warning the customer. How do I achieve the Exec SQL Task portion of this, i get a strange error message [Execute SQL Task] Error: There is an invalid number of result bindings returned for the ResultSetType: "ResultSetType_SingleRow".
Using OLEDB connection, I utilize SQL: EXEC ? = dbo.CheckCatLog
EXEC SQL Task Editer settings:
RESULTSET: Single Row
PARAMETER MAPPING: User::giBatchID
DIRECTION: OUTPUT
DATATYPE: LONG
PARAMETER NAME: 0
PS-Not sure if I need my variable giBatchID which is an INT32 but I thought it is a good idea to feed the output into here just in case there is no way that the EXEC SQL TASK can chose the failure constrainst workflow if I get a 1 returned or success constraint workflow if I get a 0 returned from stored proceedure
CREATE PROCEDURE CheckCatLog
@OutSuccess INT
AS
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON
DECLARE @RowCountCAT INT
DECLARE @RowCountLOG INT
---these totals should match
SELECT @RowCountCAT = (SELECT Count(*) FROM mydb_Staging.dbo.S_CAT)
SELECT @RowCountLOG = (SELECT Count(*) FROM mydb_Staging.dbo.S_LOG)
--PRINT @RowCountCAT
--PRINT @RowCountLOG
BEGIN
IF @RowCountCAT <> @RowCountLOG
--PRINT 'Volume of jobs from the CAT file does not match volume of jobs from the LOG file'
--RETURN 1
SET @OutSuccess = 1
END
GO
Thanks in advance
Dave
SQL Server 2000 SP3.Is it possible for the @@ROWCOUNT function to return NULL after astatement? I am troubleshooting a relatively large stored procedure withmultiple SELECT statements and a couple of INSERTs into table variables.Immediately after each statement I save the value returned by @@ROWCOUNT toa local variable. That information eventually is passed back to the clientvia one output parameter, for all statements in the procedure.Occasionally, the value returned via that parameter is NULL. This cannot bereproduced by re-running the SP with the same input parameters.Before doing any further troubleshooting, I would like to rule out thepossibility that @@ROWCOUNT can actually return a NULL under somecircumstances. From searching the archives, it appears that in SQL Server7.0 this could happen in the context of a DML query on a table withtriggers. This is not the case here - the only DML queries are INSERTs intotable variables, all other queries in the SP are SELECTs.Any related information would be appreciated.--remove a 9 to reply by email
View 3 Replies View RelatedI have stored procedures which have an output parameter with a rowcount.I used to just access the stored procedure directly. However, I'm separating my data access into a method in my data access class, and the method returns a datatable.I'm not sure how I'm supposed to access my output parameter anymore.
View 4 Replies View RelatedI am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code.
So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message:
Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages.
(1 row(s) affected)
(1 row(s) affected)
I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution?
Also, Is there a way to trace into a stored procedure through Query Analyzer?
-------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised:
SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId
IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
I have a vb.net application that executes a simple flat file to sql table dtsx package. I want to capture the rowcount to display back to the user to verify the number of rows that were inserted or updated to the table. I have a Row Count component placed between the flat file source(without errors) and the destination component. I have assigned a variable named RecordCount to the Row Count component. So far so good I hope : )
Now, I also use a variable to "feed" the package the flat file source. This works fine, but I cannot figure out how to retrieve the row count information and how to assign that to the variable RecordCount.
Also, if anyone has any insight on the way to work with the OnProgress method in SSIS I would appreciate that as well. In SQL 2000 using DTS I create a "PackageEventsSink" that I had found online, and it worked great for monitoring the progress of the DTS. Can't seem to figure out how to get it to work in SSIS.
Thanx,
Mike
I am having trouble executing a stored procedure on a remote server. On my
local server, I have a linked server setup as follows:
Server1.abcd.myserver.comSQLServer2005,1563
This works fine on my local server:
Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName
This does not work (Attempting to execute a remote stored proc named 'Data_Add':
Exec [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.Data_Add 1,'Hello Moto'
When I attempt to run the above, I get the following error:
Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'.
No entry found with that name. Make sure that the name is entered correctly.
Could anyone shed some light on what I need to do to get this to work?
Thanks - Amos.
Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK
View 3 Replies View RelatedI have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
View 1 Replies View RelatedGreetings,
I have a stored procedure that does updates. The sproc is called from an €œExec SQL Task€?. The sproc returns the number of rows that were updated using this technique:
RETURN @@ROWCOUNT
How do I capture the sproc€™s return value (number of rows) in a package-level variable? I eventually want to log this value. The sproc is not returning a result set. I€™m new to SSIS so any general guidance would be appreciated.
Thanks,
BCB
I'm trying to get the Rowcount from an inner select statement into an output parameter of a stored procedure. The following code returns the count from the outer select statement but when I try moving the 'SET @RecordCount = @@RowCount' line into the inner select statement I get errors. I've spent hours trying to get this to work but so far have not been able to do so.
ALTER PROCEDURE [dbo].[spProductSelectionAsp-test]
-- Add the parameters for the stored procedure here
@Product char(20) = null,
@PageSize int = 20,
@Page int = 1,
@RecordCount int = null OUTPUT
AS
BEGIN
SET NOCOUNT ON;
-- Insert statements for procedure here
SELECT TOP(@PageSize) * FROM
(
SELECT row_number() OVER (ORDER BY SKU.SIZE, SKU.COLOR) AS RowNumber,
SKUWH.RECNUM, SKUWH.AVAILABLE, SKU.STATUS, SKU.P1
FROM SKU INNER JOIN
SKUWH ON SKU.MASTER_NO = SKUWH.MASTER_NO INNER JOIN
SKUMKTG ON SKU.SKUMKTG_UID = SKUMKTG.UNIQUE_ID
WHERE (SKUMKTG.PRODUCT_# = @Product)
)
as _myResults
WHERE RowNumber > (@PageSize * (@Page - 1))
SET @RecordCount = @@RowCount
END
Any suggestions would be greatly appreciated.
Thanks,
Chris
Hi Folks
How do I get a return value ( a string, not int32) from an insert on a proc? This is what I've done so far:
Thanks in advance
The proc:
CREATE PROCEDURE Proc_Course_Event@action varchar(30)='',@CourseID int='0'
AS
if @action = 'ins_event' begin INSERT INTO Tbl_Course_event ( CourseID) VALUES (@CourseID) Select ReturnEventID = EventID from Tbl_Course_Event where id = @@Identity
endGO
The SQLDataSource Control:
<asp:SqlDataSource ID="Sql_Course_Names" runat="server"
ConnectionString="<%$ ConnectionStrings:TNAConnectionString %>"
SelectCommand="Proc_Course" SelectCommandType="StoredProcedure"
InsertCommand="Proc_Course_Event" InsertCommandType="StoredProcedure">
<SelectParameters>
<asp:Parameter DefaultValue="Course_Names" Name="action" Type="String" />
</SelectParameters>
<InsertParameters>
<asp:Parameter DefaultValue="ins_event" Name="action" Type="String" />
<asp:Parameter DefaultValue="CourseID" Name="CourseID" Type="String" />
<asp:Parameter Name="ReturnEventID" Type="String" Direction="Output" />
</InsertParameters>
</asp:SqlDataSource>
The code-behind:
Protected Sub Sql_Course_Names_Inserted(ByVal sender As Object, _
ByVal e As System.Web.UI.WebControls.SqlDataSourceStatusEventArgs) _
Handles Sql_Course_Names.Inserted
Dim EventID As String = Convert.ToString(e.Command.Parameters("@ReturnEventID").Value)
Response.Write(EventID)
End Sub
Can I do something like
CREATE PROCEDURE ProcA
AS
DECLARE @temp CURSOR
BEGIN
EXECUTE ProcB @temp OUT
END
GO
I am sure that this code is not right. But, if someone can tell me a better way to solve this, I would apprciate it.
AB
In sql I perform the following
SELECT * FROM
xlsdci x LEFT OUTER JOIN fffenics f ON f.[derived deal code] = x.[manual dcd id]
which gives me a row count of 2709 rows
In SSIS I have a merge join component (left outer)
left input = xlsdci with a sort order of 1 ASC on [manual dcd id] (OLE DB source component)
right input = fffenics with a sort order of 1 ASC on [derived deal code] (OLE DB source component)
which when run in the IDE gives me a rowcount of only 2594 rows
Why is this so?
Also if I change the join to INNER in the merge join, the number of rows drops dramatically to only 802.
Fair enough, I hear you cry, maybe there are IDs in the 'xlsdci' table that are not in the 'fffenics' table. Ok. But the following SQL reveals that there are only 14 rows(IDs) in 'xlsdci' that are not in 'fffenics'
SELECT * FROM xlsdci
WHERE [manual dcd id] NOT IN (SELECT [derived deal code] FROM dbo.fffenics)
What is going on here?
I have a package that I have been attempting to return a error code after the stored procedure executes, otherwise the package works great.
I call the stored procedure from a Execute SQL Task (execute Marketing_extract_history_load_test ?, ? OUTPUT)
The sql task rowset is set to NONE. It is a OLEB connection.
I have two parameters mapped:
tablename input varchar 0 (this variable is set earlier in a foreach loop) ADO.
returnvalue output long 1
I set the breakpoint and see the values change, but I have a OnFailure conditon set if it returns a failure. The failure is ignored and the package completes. No quite what I wanted.
The first part of the sp is below and I set the value @i and return.
CREATE procedure [dbo].[Marketing_extract_history_load_TEST]
@table_name varchar(200),
@i int output
as
Why is it not capturing and setting the error and execute my OnFailure code? I have tried setting one of my parameter mappings to returnvalue with no success.
I have seen this done by viewing code done by a SQL expert and would like to learn this myself. Does anyone have any examples that might help.
I guess I should state my question to the forum !
Is there a way to call a stored proc from within another stored proc?
Thanks In Advance.
Tony