Hello,
In the query analyser, I execute a select ' restore database ' + name + ' from disk = " D:sql7dumpackup ' + name + '' + Name + ' _du_21.bak " with move ' ' + name + ' _Données " to " e:sqlbasesasesdata ' + name ' _données.mdf ", move ' ' + name + ' _Journal " to " d:sqllogs ' + name + ' _journal.ldf ", replace From sysdatabases
And some lines are truncated in results ?.
how to avoid that.
If I run an sp in query analyser is there a way I can print the output ?
View 9 Replies View Related
Hi, sending a mail using sp_send_dbmail (as below) with attachment works. However the characters in the attacheted file gets truncated to 256. The file is populated with the results from the @query string.
EXECUTE msdb.dbo.sp_send_dbmail @profile_name = 'SQLAdmin'
,@recipients = 'a@a.com'
,@subject = 'Test'
,@body = 'Test'
,@body_format = 'TEXT'
,@query = 'SELECT distinct column FROM Table'
,@execute_query_database = 'PULSE'
,@attach_query_result_as_file = 1
,@query_result_header = 0
,@query_result_width = 32767
,@query_attachment_filename = 'a.pdf'
,@exclude_query_output = 1
,@query_no_truncate = 1
The value of MaxFileSize is 1 Mb when executing sysmail_help_configure_sp. It seems as if the @query_no_truncate value is being ignored by sp_send_dbmail procedure.
Any help would be appreciated.
hi, like, if i need to do delete some items with the id = 10000 then also need to update on the remaining items on the with the same idthen i will need to go through all the records to fetch the items with the same id right? so, is there something that i can use to hold those records so that i can do the delete and update just on those records and don't need to query twice? or is there a way to do that in one go ?thanks in advance!
View 1 Replies View RelatedNot sure if this is possible, but maybe. I have a table that contains a bunch of logs.
I'm doing something like SELECT * FROM LOGS. The primary key in this table is LogID.
I have another table that contains error messages. Each LogID could have multiple error messages associated with it. To get the error messages.
When I perform my first select query listed above, I would like one of the columns to be populated with ALL the error messages for that particular LogID (SELECT * FROM ERRORS WHERE LogID = MyLogID).
Any thoughts as to how I could accomplish such a daring feat?
Hi, not exactly too sure if this can be done but I have a need to run a query which will return a list of values from 1 column. Then I need to iterate this list to produce the resultset for return.
This is implemented as a stored procedure
declare @OwnerIdent varchar(7)
set @OwnerIdent='A12345B'
SELECT table1.val1 FROM table1 INNER JOIN table2
ON table1. Ident = table2.Ident
WHERE table2.Ident = @OwnerIdent
'Now for each result of the above I need to run the below query
SELECT Clients.Name , Clients.Address1 ,
Clients.BPhone, Clients.email
FROM Clients INNER JOIN Growers ON Clients.ClientKey = Growers.ClientKey
WHERE Growers.PIN = @newpin)
'@newpin being the result from first query
Any help appreciated
I have a query that performs a comparison between 2 different databases and returns the results of the comparison. It returns 2 columns. The 1st column is the value of the object being compared, and the 2nd column is a number representing any discrepancies.What I would like to do is use the results from this 1st query in the where clause of another separate query so that this 2nd query will only run for any primary values from the 1st query where a secondary value in the 1st query is not equal to zero.I was thinking of using an "IN" function in the 2nd query to pull data from the 1st column in the 1st query where the 2nd column in the 1st query != 0, but I'm having trouble ironing out the correct syntax, and conceptualizing this optimally.
While I would prefer to only return values from the 1st query where the comparison value != 0 in order to have a concise list to work with, I am having difficulty in that the comparison value is a mathematical calculation of 2 different tables in 2 different databases, and so far I've been forced to include it in the select criteria because the where clause does not accept it.Also, I am not a DBA by trade. I am a system administrator writing SQL code for reporting data from an application I support.
my question is what all can i bind my results of a select query to.i know we can use Dataset and Sqldatareader. can we use something else like hashtables. for example we can have:reader = cmd.ExecuteReader(); can we have something likeHashtable = cmd.ExecuteReader();
View 5 Replies View RelatedHi,
I think I'm just braindead or simply thick...since this shouldn't be that hard, but I'm stumped right now.
So, I'm trying to retrieve from a table, with a sql stored procedure with the sql like
"select height, width, depth from products where id=@idinput"
OK, so this part is easy, but if I wanted to say, return this to my code and assign height to a variable Ht, width to Wd and depth to Dp, how could I do that?
This is what I've got so far...
[code]
cmdSelect = New SqlCommand( "GetProd", connstr )
cmdSelect.CommandType = CommandType.StoredProcedure
dbcon.Open()
dbcon.Close()
[/code]
The main prob is just what to connect this record to in order to access the individual fields.
Thx :)
I have a Managers table in my SQL DB and it has a ManagerID, MgrName and MgrPhoto field base...
I can code a form with a select button that displays a drop down with the managers in it as choices, but am a little confused as to how I would make the PHOTO (MgrPhoto) change to the corresponding ManagerID that is selected from that option drop down since the SELECT CODE in the form only queries the ManagerID / MgrName combo for the choice.. The photo is below that drop down box and how to make it change to whatever photo is assigned to the selected ManagerID / MgrName ?
Here is the form code with query :
<form enctype="multipart/form-data" action="updatemanagerphoto.php" method="POST">
<select name="ManagerID" id="manager" style="width:400px" class="form_textbox">
<?
$db_connect= mysql_connect($db_host, $db_username, $db_password);
mysql_select_db($db_name, $db_connect) || die(mysql_error());
$sql_query= "SELECT * FROM Managers ORDER BY MgrName ASC";
[code]....
I need to insert data into a table based on the results returned by a select statement. Basically, the select statement below gives me a list of all the work orders created in the last hour.
select worknumber from worksorderhdr where date_created > DATEADD(HOUR, -1, GETDATE())
This might return anywhere between 5 and 50 records each time. What I then need to do is use each of the work numbers returned to create a record in the spec_checklist_remind table. The other details in the insert statement will be the same for each insert, it's just the worknumber from the select statement that needs to be added to the insert where the ?? are below:
INSERT INTO spec_checklist_remind (form, record_type, linked_to_worknumber, spec_checklist_id) values (5, 0, '??',52)"
I have posted this on previous forums, but the below code is a VB.net CLR stored proc that will accepts two parameters, a SELECT.... FOR XML query and a file path, and saves the resulting xml result into a file specified by the parameter. After compiling the VB code into a .dll than the T-SQL code to import the assembly, create the CLR proc and test it is included underneath. Hope some will find this useful
Code Snippet
'Requires the Trial or Release version of Visual Studio .NET 2005 Professional (or greater).
Imports System
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Imports Microsoft.SqlServer.Server
Imports System.Xml
Partial Public Class outputxml
<Microsoft.SqlServer.Server.SqlProcedure()> _
Public Shared Sub outputxml(ByVal XmlData As SqlXml, ByVal Filename As SqlString)
'Create the variables to hold the values that are supplied by the parameters
'input by the stored procedure
Dim xmlDoc As New XmlDocument()
Dim output As SqlPipe = SqlContext.Pipe()
Try
'Load the result set into the XmlDoc Variable and then save the results in the
'path provided by the stored procedure. The values are provided by the
'input parameters of the stored procedure
xmlDoc.LoadXml(XmlData.Value)
xmlDoc.Save(Filename.Value)
Catch ex As Exception
'If an error occurs catch the message and pipe it back to SQL
output.Send(ex.Message.ToString)
End Try
End Sub
End Class
T-SQL CODE BEGINS HERE
/*Alter the database to set trustworthy on in order
to allow the ability to set the assembly to external
access*/
ALTER DATABASE AdventureWorks SET trustworthy ON
--Import the assembly into SQL
CREATE ASSEMBLY outputxml
from 'C:outputxml.dll'
WITH PERMISSION_SET = EXTERNAL_ACCESS
-- Create the proc from the imported dll
CREATE PROCEDURE output
@xmldata XML,
@filename nvarchar(1024)
AS
EXTERNAL NAME outputxml.[outputxml.outputxml]
.outputxml
-- Test managed stored procedure
DECLARE @output xml
SET @output = (SELECT ProductID, Name, ListPrice
FROM Production.Product Product
FOR XML AUTO, ROOT('Catalog'), TYPE)
EXEC dbo.outputxml @output, 'c:Output.xml'
GO
Hello all,
I have a problem... I have a SELECT query I have used in my PHP report. It is as follows:
SELECT DISTINCT callref, CASE WHEN (stage.due_date < stage.completed_date) THEN 'SLA Breach' ELSE ' In SLA' END AS sla
FROM tableX....
WHERE call_status=open.....
I wish to search through all stages (i.e response, fix, end) of the calls logged in our database, & then return 'In SLA' for each call that had all its stages completed within the SLA, & 'Breach' for all calls that had even one of its stages completed outside its SLA.
At the moment the SELECT query above gives me the following results:
Call Ref sla
10001 In SLA
10002 Breach
10002 In SLA
10003 In SLA
10004 In SLA
10005 Breach
10005 In SLA
... ...
What it should look like is this....
Call Ref sla
10001 In SLA
10002 Breach
10003 In SLA
10004 In SLA
10005 Breach
... ...
Please let me know if anyone has the answers or any clues to this! thanks.
Hello.Lets say that there is a table with N rows. now, i want to display the table's data on a web page. one way is to select the whole table and add each row's data to the webpage (something like SELECT * FROM TABLE1).going this way will create a huge page. i want to speared the results over multiple pages - excatly as this forum spread each forum messages over multiple pages.
for this purpose, i need to query Y rows each time, for example, if my table has 20 rows, and say that i want that each page will display 5 rows, then i need to query 5 rows each time. the first 5 rows for the first page, the next 5 rows for the second page and so on...
is there any way to achieve it using an SQL query?
the simplest way is to select the whole table and manaually filter the results. but this way will become slow as the table grows with data... and i dont want to select rows which i wont display anyway.
any suggestions?
Thanks.
I am trying to find a way to lock rows of data used in a SELECT query from being read by another SELECT query.
I could do a "begin tran - select - update - rollback" sequence but was wondering if there is a cleaner way to do this??
Tried UPDLOCK, ROWLOCK, TABLOCK, HOLDLOCK in multiple variations but none seem to block the select.
I have  created a table(T1) from select query result, that Select query is parameterised. Now I need to update the select query table(T1) based on the result every time.
Below is my Query:
 ALTER PROCEDURE [dbo].[RPT_Cost_copy]
SELECT MEII.*, SIMM.U_SP2DC, UPPER(SIMM.U_C3C2) AS GRP3,sb.cost, PREV.Z1, PREV.Z3, SB.Z2, SB.Z4,SIMM.U_C3DC1 AS FAM
INTO T1
FROMÂ
(SELECT a.meu, a.mep2, SUM(a.mest) as excst        Â
FROM mei as A WHERE a.myar=@yr and a.mprd=@mth AND LTRIM(A.MCU) <> '' AND LTRIM(A.MRP2) <> '' Â Â Â
[code]....
I am attempting to sort the results of a query executed against a table variable in descending order. The data is being inserted into the table variable as expected, however when I attempt to order the results in descending order, the results are incorrect. I have included the code as well as the result set.
DECLARE @tblCustomRange AS TABLE
(
RecordID INTEGER IDENTITY(1,1),
RangeMonth INTEGER,
RangeDay INTEGER
)
DECLARE @Month INTEGER
DECLARE @Day INTEGER
-- Initialize month and day variables.
SET @Month = 8
SET @Day = 11
-- Insert records into the table variable.
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (1,2)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (1,27)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (6,10)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (9,22)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (12,16)
-- Select everything from the table variable ordering the results by month, day in
-- descending order
SELECT * FROM @tblCustomRange
WHERE (RangeMonth < @Month) OR
(RangeMonth = @Month AND RangeDay <= @Day)
ORDER BY RangeMonth, RangeDay DESC
I am getting the following resultset:
RecordID RangeMonth RangeDay
----------- ----------- -----------
2 1 27
1 1 2
3 6 10
I am expecting the following resultset:
RecordID RangeMonth RangeDay
----------- ----------- -----------
3 6 10
2 1 27
1 1 2
I'm running a query, actually its an insert that works when using the TSQL below.
However when I try to use the debugger to step through and using the exact same values as those below I get the following error:
[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification
Its Killing me because everything else works, but this. Can somebody help.
DECLARE @NoteID INT,-- NULL OUTPUT,
@Note_Description NVARCHAR(3000),-- = NULL,
@Date DateTime,-- = NULL OUTPUT,
@ByWho NVARCHAR(30),-- = NULL,
@FK_Action_Performed NVARCHAR(40),-- = NULL,
@FK_UserID INT,-- = NULL,
@FK_JobID INT,-- = NULL,
@Job_Date DateTime,-- = NULL,
@Start DateTime,-- = NULL,
@Finish DateTime,-- = NULL,
@BeenRead NVARCHAR(10),-- = NULL
@FK_UserIDList NVARCHAR(4000)-- = NULL
--SET @NoteID = 409 --NULL OUTPUT,
SET @Note_Description = 'Tetsing'
--SET @Date DateTime = NULL OUTPUT,
SET @ByWho = 'GeorgeAgaian'
SET @FK_Action_Performed = 'Worked hard'
SET @FK_UserID = 5
SET @FK_JobID = 29
SET @Job_Date = 28/01/03
SET @Start = '1:00:20 PM'
SET @Finish = '1:00:20 PM'
SET @BeenRead = 'UnRead'
SET @FK_UserIDList = '1,2,3'
--AS
--SET NOCOUNT ON
SET NOCOUNT ON
SET XACT_ABORT ON
BEGIN TRANSACTION
SET @Date = GETDATE()
-- Insert Values into the customer table
INSERT Note (Note_Description,
Date,
ByWho,
FK_Action_Performed,
FK_UserID,
FK_JobID,
Job_Date,
Start,
Finish)
SELECT --@NoteID,
@Note_Description,
@Date,
@ByWho,
@FK_Action_Performed,
@FK_UserID,
@FK_JobID,
@Job_Date,
@Start,
@Finish
-- Get the new Customer Identifier, return as OUTPUT param
SELECT @NoteID = @@IDENTITY
-- Insert new notes for all the users that the note pertains to, in this case this will be by the assigned
-- users.
IF @FK_UserIDList IS NOT NULL
EXECUTE spInsertNotesByAssignedUsers @NoteID, @FK_UserIDList
-- Insert New Address record
-- Retrieve Address reference into @AddressId
-- EXEC spInsertForUserNote
-- @FK_UserID,
--@NoteID,
-- @BeenRead
-- @Fax,
-- @PKId,
-- @AddressId OUTPUT
COMMIT TRANSACTION
--------------------------------------------------
GO
Using SQL Server 2005 Express:
I'd like to know how to do a SELECT Query using the following tables:
Miles Table:
Date/Car/Miles/MilesTypeID
===============
(some date)/Ford/20/1
(some date)Ford/20/2
(some date)Chevy/30/1
(some date)Toyota/50/3
(some date)Ford/30/3
Miles Type Table
MilesTypeID/MilesType
=================
1/City
2/Highway
3/Off-Road
I'd like the results to be like this:
Date/Car/City Miles/Highway Miles/Off-Road Miles
=====================================
(date)-Ford-20-0-0
(date)-Chevy-0-20-0
(date)-Ford-20-0-0
(date)-Toyota-0-0-50
(date)-Ford-0-0-30
Anyone? Thanks in advance!
Hello everybody,
I'm developing a report using the following structure :
declare @sql as nvarchar(4000)
declare @where as nvarchar(2000)
set @sql = 'select ....'
If <conditional1>
begin
set @where = 'some where'
end
If <conditional2>
begin
set @where = 'some where'
end
set @sql = @sql + @where
exec(@sql)
I run it in query analyser and works fine, but when I try to run in Reporting Services, Visual studio stops responding and the cpu reaches 100 %.
I realize that when I cut off the if clauses, then it works at Reporting services.
Does anybody know what is happening?
Why the query works in query analyser and doesn't work in Reporting Service ?
Thanks,
MaurÃcio
I am trying to fetch records from excel sheet using Select Query but I am getting the error message saying
"Msg 7302, Level 16, State 1, Line 1
Cannot create an instance of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)"."
Here is my Query,
sp_configure 'show advanced options',1
reconfigure with override
go
sp_configure 'Ad Hoc Distributed Queries',1
reconfigure with override
go
reconfigure
SELECT *
FROM OPENROWSET
('Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=C:M2MworkedworkedBOS.xlsx;HDR=YES', 'select * from [Sheet1$]') AS A;
Hi ,
I am having 2 data store .
1. Oracle 10g
2 SQL server 2000
My requirement is that , i need to insert some data from sql server database table to oracle database using sql server query analyser or interface.
If there is any way ,plz let me know it
Thanks
Abraham
Hi
This what i did , since i need to maintain
five sql servers ,i thought i will build a repository
so on my desk top (running sql server ) i created a
table name master_dbscript with the following fields
server_name varchar(20),
dbname varchar(20)
db_create_scripts text
using enterprise manager-- all tasks --generate sql scripts , (cut & paste
to the insert statement in query analyser, the following is the insert statement
insert into master_dbscript values ('isd11t','test','ALTER TABLE [dbo].[child] DROP CONSTRAINT FK_child_parent GO /****** Object: Trigger dbo.test_patcase Script Date: 25/08/2000 12:10:09 ******/ if exists (select * from sysobjects where id = object_id(N'[dbo].[test_patcase]') and OBJECTPROPERTY(id, N'IsTrigger') = 1)drop trigger [dbo].[test_patcase] GO ')
oops it created all the objects in the database where i tried to run the
insert statement. god saved me , i tried this with the test database.
when i tried the same with bcp it worked fine and i was able to see the
record in my table (one record) ,note you cannot use dts because it will support maximum 8000 chars only .
what is the problem with the query analyser ?
Hi Everybody,
I am executing the following query in the query analyser.
"select * from alien119700 order by alienid"
In the message pane it shows
SQL Server Execution Times:
CPU time = 0 ms, elapsed time = 0 ms.
SQL Server parse and compile time:
CPU time = 0 ms, elapsed time = 4 ms.
SQL Server parse and compile time:
CPU time = 0 ms, elapsed time = 0 ms.
(43 row(s) affected)
SQL Server Execution Times:
CPU time = 0 ms, elapsed time = 454 ms.
SQL Server parse and compile time:
CPU time = 0 ms, elapsed time = 0 ms.
What does all this mesaages mean?
Can anyone explain this to me?
Thanx in advance.
Regards,
Samir.
We use SQL 2K(service pack 1).Our query analyser will freeze often.So we loose all query production work.Does anyone know if Version 2 has a fix?Please help.
View 4 Replies View RelatedI noticed that query analyser is much more quicker than EManager when I access my database from my hosting provider... is there any way to see the properties of the table X for example as one can do with EM...
I would be grateful if you could provide me with any query sample conserning this issue...
Thanks
Jst curios,
How does the Query Analyser connect to the database..does it use any of the ODBC or OLE DB API's
THx
Venu
I am currently using the trial version of SQL 2000 to connect to a remote db so I can query the data.
When the trial version runs out what can i do? will MSDE work for me or will the express edition of SQL 2005 be better?
Thanks! Bruno
Is there Query Analyser in SQLServer 2005 like there was in 2000 ? If so, how do I access it.
Thanks
Hi,
Can't seem to find which download includes Query Analyser, I have downloaded Management Studio Express
Help Please
Hi All ,
In my M/c the query analyser is not working when ever I try to run it by Using Enterprise manager / Explorer / Start menu - Program / Isqlw.exe.
When I Tried the task manager it shows the process isqlw is working. But I can't see any window coming up ..
Please help me otherwise I will go mad....using other tools to query . 50 % time i use this tool in work. U guys know how important it is ..
Thank u
Jeo
Hi All ,
In my M/c the query analyser (SQL 2000) is not working when ever I try to run it by Using Enterprise manager / Explorer / Start menu - Program / Isqlw.exe.
When I Tried the task manager it shows the process isqlw is working. But I can't see any window coming up ..
Please help me otherwise I will go mad....using other tools to query . 50 % time i use this tool in work. U guys know how important it is ..
Thank u
Jeo
Hi,
I am studying SQL Server by myself (I am a Sybase DBA) and I have a little problem with the Query Analyser.
I actually have 2 server in my PC (XP) and I can see them via SQL Server Enterprise Manager, I also can open Query Analyser for these two server via Enterprise Manager.
When I try to launch SQL Query Analyser from the start menu, I can't see any of my two server and can't chose a connection.
Do I need to write some parameter somewhere?
It's not a big problem as I can work via Enterprise Manager but I just want to know.
Thank you for your response.
Eric