I had thought that this was possible but I can't seem to figure out the syntax. Essentially I have a report where one of the parameters is populated by a stored procedure.
Right now this is easily accomplished by using "exec <storedprocname>" as the query string for the report parameter. However I am not clear if it is possible to now incorporate User!UserID as parameter to the stored procedure. Is it? Thanks
Hello,
since a couple of days I'm fighting with RS 2005 and the Stored Procedure.
I have to display the result of a parameterized query and I created a SP that based in the parameter does something:
SET ANSI_NULLS ON
SET QUOTED_IDENTIFIER ON
CREATE PROCEDURE [schema].[spCreateReportTest]
@Name nvarchar(20)= ''
AS
BEGIN
declare @slqSelectQuery nvarchar(MAX);
SET NOCOUNT ON
set @slqSelectQuery = N'SELECT field1,field2,field3 from table'
if (@Name <> '')
begin
set @slqSelectQuery = @slqSelectQuery + ' where field2=''' + @Name + ''''
end
EXEC sp_executesql @slqSelectQuery
end
Inside my business Intelligence Project I created:
-the shared data source with the connection String
- a data set :
CommandType = Stored Procedure
Query String = schema.spCreateReportTest
When I run the Query by mean of the "!" icon, the parameter is Prompted and based on the value I provide the proper result set is displayed.
Now I move to "Layout" and my undertanding is that I have to create a report Paramater which values is passed to the SP's parameter...
So inside"Layout" tab, I added the parameter: Name
allow blank value is checked and is non-queried
the problem is that when I move to Preview -> I set the value into the parameter field automatically created but when I click on "View Report" nothing has been generated!!
What is wrong? What I forgot??
Thankx for any help!
Marina B.
Hi,
I have started using SQL Server 2005 Reporting Services. I am using SQl Server authentication where user has to supply username and password .I want to know can I Pass the SQL authentication username and password in the URL as a parameter to report.
Nikhil Jahagirdar
Hi, I have created an insert stored procedure which inserts a userid into an sql server 2005 field of datatype uniqueidentifier.
What datatype would the parameter be in my c# code?
do i pass it in as an object datatype?
the code is below....
1 conn = new SqlConnection(ConfigurationManager.ConnectionStrings["LocalSqlServer"].ConnectionString);
2
3 cmd = new SqlCommand("spInsKeyswap_history", conn);
4
5 cmd.CommandType = CommandType.StoredProcedure;
6
7 MembershipUser mu = Membership.GetUser(User.Identity.Name);
8
9 object gdUserID = mu.ProviderUserKey;
10
11
12
13
14
15 cmd.Parameters.Add("@user_title", SqlDbType.VarChar, 50);
16
17 cmd.Parameters.Add("@first_name", SqlDbType.VarChar, 20);
18
19 cmd.Parameters.Add("@last_name", SqlDbType.VarChar, 50);
20
21 cmd.Parameters.Add("@email", SqlDbType.VarChar, 50);
22
23 cmd.Parameters.Add("@birthday", SqlDbType.VarChar, 15);
24
25 cmd.Parameters.Add("@alternate_number", SqlDbType.VarChar, 50);
26
27 cmd.Parameters.Add("@msisdn", SqlDbType.VarChar, 50);
28
29 cmd.Parameters.Add("@call1", SqlDbType.VarChar, 50);
30
31 cmd.Parameters.Add("@call2", SqlDbType.VarChar, 50);
32
33 cmd.Parameters.Add("@call3", SqlDbType.VarChar, 50);
34
35 cmd.Parameters.Add("@new_sim_msidn", SqlDbType.VarChar, 50);
36
37 cmd.Parameters.Add("@dealer_id", SqlDbType.UniqueIdentifier);
38
39 cmd.Parameters.Add("@status_code", SqlDbType.Int);
40
41 cmd.Parameters.Add("@support_id", SqlDbType.Int);
42
43 cmd.Parameters.Add("@return_value", SqlDbType.Int);
44
45 cmd.Parameters["@user_title"].Value = txtTitle.Text.ToString();
46
47 cmd.Parameters["@first_name"].Value = txtFirstName.Text.ToString();
48
49 cmd.Parameters["@last_name"].Value = txtLastName.Text.ToString();
50
51 cmd.Parameters["@email"].Value = txtEmailAddress.Text.ToString();
52
53 cmd.Parameters["@birthday"].Value = txtBirthday.Text;
54
55 cmd.Parameters["@alternate_number"].Value = txtAlternate.Text.ToString();
56
57 cmd.Parameters["@msisdn"].Value = txtNew.Text.ToString();
58
59 cmd.Parameters["@call1"].Value = txtCall1.Text.ToString();
60
61 cmd.Parameters["@call2"].Value = txtCall2.Text.ToString();
62
63 cmd.Parameters["@call3"].Value = txtCall3.Text.ToString();
64
65 cmd.Parameters["@new_sim_msidn"].Value = txtOld.Text.ToString();
66
67 //get logged in users user_id from membership
68
69 cmd.Parameters["@dealer_id"].Value = gdUserID;
70
71 cmd.Parameters["@status_code"].Value = 1;
72
73 cmd.Parameters["@support_id"].Value = 0;
74
75
76
77 cmd.Parameters["@return_value"].Direction = ParameterDirection.ReturnValue;
78
79 cmd.ExecuteNonQuery();
80
81 int returnValue = (int)cmd.Parameters["@return_value"].Value;
82
83 conn.Open();
84
85
86
Hi, I have found this question asked many times online, but the answers always consisted of getting a parameter from the user and to the report. That is NOT what everyone was asking. I would like to know how to pass a parameter I already have into my stored procedure. Using Visual Studio 2005, in the "Data" tab of a report calling something likeUnique_Login_IPsreturns correctly when that stored proc takes no params, but when I have one that takes the year, for example, I do not know how to pass this info in. Note: the following does not work in this context : EXEC Unique_Login_IPs ParameterValue nor does EXEC Some_proc_without_paramsVisual studio seems to want only the procedure name because it returns errors that say a procedure with the name "the entire line above like EXEC Unique_Login_IPs ParameterValue" does not exist.... Thanks in advance,Dustin L
View 1 Replies View RelatedHi All,
I'm unable to run the report the report with multi-valued parameter using the below StoredProcedure as dataset:
CREATE PROCEDURE spprodsales
@productid int
AS
select SalesOrderID,OrderQty,UnitPrice,ProductID
FROM Sales.SalesOrderDetail
Where ProductID IN (@productid)
RETURN
And when I'm replacing this dataset to a query as below I'm able to run the report with multiple values selected for productid parameter :
select SalesOrderID,OrderQty,UnitPrice,ProductID
FROM Sales.SalesOrderDetail
Where ProductID IN (@productid)
So, can anyone please help me out possibly using the same stored procedure as above.
Thanks,
Kripa
Is it possible to include a text/string as suffix(append to the end of textbox) to an report parameter prompt string ? Something like this
Enter Date: [ Textbox ] format:mm/dd/yyyy
Enter Age:[Textbox ] e.g 50
I need to include text like the one that I have highlighted in blue. Could someone help me out?
My Required tables are
I am Passing one parameter Is UserID
Table Name : SC_Attendence
ColumnName Datatype
AttendanceID int CompanyID int AttendanceDate datetime SectionID int
Table Name : SC_AttendenceDetails
Columnname Datatype
AttendanceDetailID int AttendanceID int
UserID int
IsAttended bit
IsLate bit
Table : SC_UserSections
columnname Datatype
UsersSectionId int
UserId int
SectionId int
CreatedDate datetime
Month NoofAttendenceDays NoofPresentdays
January 25 21
Febrauary 22 19
March 25 22
Thanx in advance It's very urgent
When integrating SQL Reporting Services 2005 with Sharepoint Services 3.0, and you have a SRS report that runs over a view with the UserID as a parameter (to filter the records the user has access to), will the SharePoint ReportViewer passover the UserID to RS and RS to SQL?
Sharepoint security with Reporting Services stops at Item level or does it impersontate down to SQL? Should authenticating be Integrated or SQL ? Should the userid in SQL be exact match with Sharepoint? Or are they mapped somewhere?
Thank You!!
Request is to have a Requirement number from the requirement form generate a report in Reporting Services with the requirement number as a filter.
I can set up the parameter - how does the value get there? Should I be asking this question in the Visual C# group?
Thanks!
Terry B
I am using report builder 3.0.
I have a report parameter called para1 which is a drop-down list and what I want to do is display another report parameter based on the para1 selection.
So for example, para1 contains a, b, c choices. if a user selects b, I would like para2 to display but if the user selects a or c, I don't want the para2 to display.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.Â
Is this a bug in Visual Studio? How do I get around this?Â
I have created a menu report listing available reports and am setting the Jump to settings of each text box in the list to take the user to the relevent report. But I am having a problem setting up drill down to reports with multivalued parameters.
What I want to happen when the user drills down is for the report to open up with no parameter values selected. This works for single value parameters where I have set Null as the default value. But I have not been able to figure out how to do this with MVPs. Does anybody know if this is possible?
As a workaround I have been using Jump to URL (rather than Jump to report), which has no problem opening the report without having to pass any values for the MPV. But I do not like using this as I use different DEV/UAT and PROD environments so would have to amend the URL for each environment.
Seems like this should be possible... Any idea?
Cheers, Mike
PS: I should add I can Jump to reports with MVP without specifying a parameter in development studio but not when the report is published.
I'm using Cube.My DimDate tables Datekey is integer .But client wants a calendar to set date as you see in picture .how can I change calendar value  which will be input by user.
View 3 Replies View RelatedHas anyone encountered this before?
Procedure or Function 'stored procedure name' expects parameter '@parameter', which was not supplied.
It seems that my code is not passing the parameter to the stored procedure.
When I click this hyperlink:
<asp:HyperLink
ID="HyperLink1"
Runat="server"
NavigateUrl='<%# "../Division.aspx?CountryID=" + Eval("CountryID")%>'
Text='<%# Eval("Name") %>'
ToolTip='<%# Eval("Description") %>'
CssClass='<%# Eval("CountryID").ToString() == Request.QueryString["CountryID"] ? "CountrySelected" : "CountryUnselected" %>'>
</asp:HyperLink>
it is suppose to get the country name and description, based on the country id.
I am passing the country id like this.
protected void Page_Load(object sender, EventArgs e)
{
PopulateControls();
}
private void PopulateControls()
{
string countryId = Request.QueryString["CountryID"];
if (countryId != null)
{
CountryDetails cd = DivisionAccess.GetCountryDetails(countryId);
divisionNameLabel.Text = cd.Name;
divisionDescriptionLabel.Text = cd.Description;
}
}
To my app code like this:
public struct CountryDetails
{
public string Name;
public string Description;
}
public static class DivisionAccess
{
static DivisionAccess()
public static DataTable GetCountry()
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountry";
return GenericDataAccess.ExecuteSelectCommand(comm);
}
public static CountryDetails GetCountryDetails(string cId)
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountryDetails";
DbParameter param = comm.CreateParameter();
param.ParameterName = "@CountryID";
param.Value = 2;
param.DbType = DbType.Int32;
comm.Parameters.Add(param);
DataTable table = GenericDataAccess.ExecuteSelectCommand(comm);
CountryDetails details = new CountryDetails();
if (table.Rows.Count > 0)
{
details.Name = table.Rows[0]["Name"].ToString();
details.Description = table.Rows[0]["Description"].ToString();
}
return details;
}
As you can see I have two stored procedures I am calling, one does not have a parameter and the other does. The getcountry stored procedure returns the list of countries in a menu that I can click to see the details of that country. That is where my problem is when I click the country name I get
Procedure or Function 'GetCountryDetails' expects parameter '@CountryID', which was not supplied
Someone please help!
Thanks Nickdel68
I have this update procedure that updates and encrypts a credit card column. I added the pass phrase to a table and now I'm trying to use that pass phrase in my update procedure.
When I run the update from the app the error is that the procedure is not getting the @Phrase parameter.
Can anyone see why this might be?ALTER PROCEDURE [dbo].[UpdatePayment]
@paymentID int,
@PaymentDate datetime,
@TenderTypeID int,
@PaymentAmount money,
@CreditCardType int,
@ExpirationDate datetime,
@ccNumber nvarchar(50),
@Phrase nvarchar(25)
AS
BEGIN
SET NOCOUNT ON;
SET @Phrase = (SELECT Phrase FROM tblSpecialStuff)
UPDATE tblReceipts SET
PaymentDate=@PaymentDate,
TenderTypeID=@TenderTypeID,
AmountPaid=@PaymentAmount,
CreditCardType=@CreditCardType,
ExpirationDate=@ExpirationDate,
ccNumber = (CASE
WHEN @CreditCardType > 0 THEN
EncryptByPassPhrase(@Phrase,@ccNumber)
ELSE @ccNumber
END)
END
hi,
i need to run a stored procedure from an asp page that will import data into a temporary table.
i am having trouble with passing the parameter from the Exec command (currently developing in QA). It works ok where i want to use a value such as 'PC', or 'printer' or 'laptop' where the import sql has a where clause of '... = <<parameter>>...'.
I want however to be able to pass it a value such as ['printer','laptop','pc']so that the procedure will collect the data into the temp table with an '...in <<parameter>>'
this falls over and retrieves zero rows. the parameter is passed to the sp correctly as i have used a print command to display it, it comes back as 'pc',printer','laptop'. It appears to be the ' in ' that is not parsing the parameter.
can anyone help please?
TIA
Hello!
I have a problem when i want to construct a stored procedure. I want to pass a parameter with customerid's. The problem is that I don´t know how many customerId's I send to the stored procedure, because the user select the customerId's from a selectbox. The SQL string I want to excute looks like this
SELECT CustomerName FROM Customer WHERE CustomerId IN (199, 301, 408... )
How should I create the stored procedure so I put the customerId values in a parameter, like the procedure below? (I know that this not will work)
CREATE PROCEDURE rpt_PM2000_test(@SCustomerId varChar)
AS
BEGIN
SELECT Customer
FROM Customer
WHERE CustomerId IN (@sCustomerId)
END
/Fredrik
In the Create portion of a stored procedure, does the line in bold mean
that if the parameter @RegoDate is not provided, then use the current datetime?
CREATE PROCEDURE spGetRegoDetail
@Owner nvarchar(20),
@RegoDate datetime = getdate
AS ...
Thanks in advance,
G11DB
Hi,
I have an Access front end/MSDE2000 backend system. There is a form that has a subform which is based on the results of a stored procedure. Both my subform and mainform contain intOrderID ( which is the field i want to link both of them with ).
I would like to have the subform's data updated when changing records in the mainform. In Access, this was simple ( link child and master fields ), but not with MSDE2000 as a back end ( ADO connection thing...)
I think i have to create something to filter the results of the stored procedure, but i dont like the fact the the entire dataset needs to be transmitted over the network ( most of the time, users will only be creating new records, or reviewing recently created ones )
I'm really not sure as to how to accomplish this... Any ideas?
thanks!
HiI'm trying to alter my stored procedure to take a parameter for theDatabase Name, but as usual the syntax is killing me.Thanks for any helpDennis'--------------------------------------------------------------------------*--------------------------------Before - This Works without a paramater'--------------------------------------------------------------------------*--------------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONgoALTER PROCEDURE [dbo].[sp_CreateNewClientDb]ASCREATE DATABASE [MyClientDatabase] ON PRIMARY( NAME = N'MyClientDatabase',FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDATAMyClientDatabase.mdf' ,SIZE = 11264KB ,MAXSIZE = UNLIMITED,FILEGROWTH = 1024KB )LOG ON( NAME = N'MyClientDatabase_log',FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDATAMyClientDatabase_log.ldf' ,SIZE = 1024KB ,MAXSIZE = 2048GB ,FILEGROWTH = 10%)COLLATE SQL_Latin1_General_CP1_CI_AS'--------------------------------------------------------------------------*--------------------------------After - This Doesn't work with a parameter'--------------------------------------------------------------------------*--------------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONgoALTER PROCEDURE [dbo].[sp_CreateNewClientDb]ASCREATE DATABASE @ClientDBName ON PRIMARY( NAME = N@ClientDBName,FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDATA@ClientDBName' + '.mdf' ,SIZE = 11264KB ,MAXSIZE = UNLIMITED,FILEGROWTH = 1024KB )LOG ON( NAME = N'@ClientDBName' + '_log',FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLDATA@ClientDBName' + '_log.ldf' ,SIZE = 1024KB ,MAXSIZE = 2048GB ,FILEGROWTH = 10%)COLLATE SQL_Latin1_General_CP1_CI_ASMsg 102, Level 15, State 1, Procedure sp_CreateNewClientDb, Line 4Incorrect syntax near '@ClientDBName'.
View 5 Replies View RelatedHi all,
I'm trying to create a SP with a parameter for server.
CREATE PROCEDURE dbo.sp_Testing
@server ???????
AS
SELECT * from @server
GO
Does anyone know how to do what i'm trying here..???
I don't know the type of the parameter...is it just simply server? or is there another specific name for it???
thanks,
I'm attempting to return a value from my stored procedure. Here is my button click event that runs the stored procedure. protected void btn_Move_Click(object sender, EventArgs e)
{
/*variables need for the update of the old staff record
and the creation of the new staff record.
*/
BMSUser bmsUser = (BMSUser)Session["bmsUser"];
int staffid = Convert.ToInt32(bmsUser.CmsStaffID);
int oldStaffProfileID = Convert.ToInt32(Request.QueryString["profileid"]);
string newManager = Convert.ToString(RadComboBox_MangersbyOrg.Text);
int newMangerProfileID = Convert.ToInt32(RadComboBox_MangersbyOrg.Value);
SqlConnection conn = new SqlConnection(connect);
SqlCommand cmd = new SqlCommand();
cmd.Connection = conn;
cmd.CommandType = CommandType.StoredProcedure;
cmd.CommandText = "sp_BMS_MoveStaffMember";
cmd.Parameters.Add("@OldStaffProfileID", SqlDbType.Int);
cmd.Parameters["@OldStaffProfileID"].Precision = 9;
cmd.Parameters["@OldStaffProfileID"].Scale = 0;
cmd.Parameters["@OldStaffProfileID"].Value = oldStaffProfileID;
cmd.Parameters.Add("@NewManagerProfileID", SqlDbType.Int);
cmd.Parameters["@NewManagerProfileID"].Precision = 9;
cmd.Parameters["@NewManagerProfileID"].Scale = 0;
cmd.Parameters["@NewManagerProfileID"].Value = newMangerProfileID;
cmd.Parameters.Add("@LastModifiedBy", SqlDbType.Int);
cmd.Parameters["@LastModifiedBy"].Precision = 9;
cmd.Parameters["@LastModifiedBy"].Scale = 0;
cmd.Parameters["@LastModifiedBy"].Value = staffid;
SqlParameter sp = new SqlParameter("@OLDManagerReturn", SqlDbType.Int);
sp.Direction = ParameterDirection.Output;
cmd.Parameters.Add(sp);
lbl_ERROR.Text = Convert.ToString(sp);
conn.Open();
SqlTransaction trans = conn.BeginTransaction();
cmd.Transaction = trans;
cmd.ExecuteNonQuery();
conn.Close();
My parameter sp is coming back null for some reason. Am I not setting the parameter correctly? I set a break point and it says the value is null.
Here is the parts of my stored proc returning the value...
DECLARE @OLDManagerReturn numeric(9)
SELECT @OLDManagerReturn = ManagerProfileID FROM tblBMS_Staff_rel_Staff WHERE StaffProfileID = @OldStaffProfileID AND Active=1 AND BudgetYear = @BudgetYear
RETURN @OLDManagerReturn
In the SqlDbType enumeration there is no value for the new (max) types, only varchar. If Im passing a large string, it will get cut off at 8K. So how do I specify my varchar parameter as being of the max type ?
View 1 Replies View RelatedHi,This works:CREATE PROCEDURE MyProc @Date smalldatetime = '2005-01-01'AS... But this does not CREATE PROCEDURE MyProc @Date smalldatetime = GETDATE()AS... I'm talking about sql2005. Can anyone help how to overcome this?
View 3 Replies View RelatedHow do I assign a temp value to a parameter in a stored procedure?
I am trying like so:
Alter PROCEDURE ap_Insert_Pricing_ListPrice @partNumber varchar = "CQ2"AS SELECT PartNumber FROM Pricing WHERE (PartNumber = @partNumber)GO
What is the correct way to assign a temp value for testing purposes in SQL Server 2000 Query Analyzer?
When I try:
Alter PROCEDURE ap_Insert_Pricing_ListPrice @partNumber varchar
AS
Set @partNumber = "10-AF40-N04B-JZ"SELECT PartNumber FROM Pricing WHERE (PartNumber = @partNumber)GO
I get error:
Invalid column name '10-AF40-N04B-JZ'.
I have two stored procedures one generates an output parameter that I then use in the second stored procedure.
1 Try2 Dim myCommand As New SqlCommand("JP_GetChildren", myConn)3 myCommand.CommandType = Data.CommandType.StoredProcedure4
5 myCommand.CommandType = Data.CommandType.StoredProcedure6 myCommand.Parameters.Add(New SqlParameter("@ParentRule", Data.SqlDbType.NVarChar))7 myCommand.Parameters.Add(New SqlParameter("@PlantID", Data.SqlDbType.NVarChar))8 myCommand.Parameters.Add(New SqlParameter("@New_ReleasingRulePrefix", Data.SqlDbType.NVarChar))9 myCommand.Parameters.Add(New SqlParameter("@New_ReleasingRuleSuffix", Data.SqlDbType.NVarChar))10 myCommand.Parameters.Add(New SqlParameter("@New_PlantID", Data.SqlDbType.NVarChar))11 myCommand.Parameters.Add(New SqlParameter("@New_RuleSetID", Data.SqlDbType.NVarChar))12 myCommand.Parameters.Add(New SqlParameter("@Count", Data.SqlDbType.Int))13 myCommand.Parameters.Add(New SqlParameter("@IDField", Data.SqlDbType.NVarChar))14
15 Dim OParam As New SqlParameter()16 OParam.ParameterName = "@IDFieldOut"
17 OParam.Direction = ParameterDirection.Output18 OParam.SqlDbType = SqlDbType.NVarChar19 myCommand.Parameters.Add(OParam)20
21
22 myCommand.Parameters("@ParentRule").Value = txtParentRule.Text23 myCommand.Parameters("@PlantID").Value = txtStartingPlantID.Text24 myCommand.Parameters("@New_ReleasingRulePrefix").Value = txtReleaseRuleFromPrefix.Text25 myCommand.Parameters("@New_ReleasingRuleSuffix").Value = txtReleaseRuleFromSuffix.Text26 myCommand.Parameters("@New_PlantID").Value = txtEndingPlantID.Text27 myCommand.Parameters("@New_RuleSetID").Value = txtEndingRuleSetID.Text28 myCommand.Parameters("@Count").Value = 129 myCommand.Parameters("@IDField").Value = " "
30 myCommand.Parameters("@IDFieldOut").Value = 031
32 myCommand.ExecuteNonQuery()33
34 Dim IDField As String = myCommand.Parameters("@IDFieldOut").Value35
If i run this stored procedure in sql it does return my parameter. But when i run this code IDField comes back null. Any ideas
I have a stored procedure that inserts a new record, and returns the ID value for the newly inserted record. The procedure works fine, but I'm unable to get that return value in my code. Here's what I have:
IF OBJECT_ID ( 'dbo.dbEvent', 'P') IS NOT NULL
DROP PROCEDURE dbEvent
GO
CREATE PROCEDURE
@Name varchar(200)
,@Location varchar(200)
AS
INSERT INTO Event
(
NAME
, LOCATION
)
VALUES
(
NAME
, @LOCATION
)
SELECT SCOPE_IDENTITY()
And my code behind: public Int64 Insert(SqlConnection Conn)
{
try
{
using (SqlCommand Command = new SqlCommand("dbo.dbEvent", Conn))
{
Command.CommandType = CommandType.StoredProcedure;
Command.Parameters.Add("@ID", ID).Direction = ParameterDirection.Output;
Command.Parameters.Add("@NAME", SqlDbType.VarChar, 200).Value = PermitName;
Command.Parameters.Add("@LOCATION", SqlDbType.VarChar, 200).Value = Location;
if (Conn.State != ConnectionState.Open) Conn.Open();
Command.ExecuteNonQuery();
Int64 _requestId = Convert.ToInt64(Command.Parameters.Add("@ID", SqlDbType.BigInt).Value.ToString());
return _requestId;
}
I'm getting the error that I have "Too many arguments specified" in my Insert() method. When I test the procedure in Query Analyzer, it works fine and returns the correct value.
Any suggestions? Don't I need to declare that return value in my .NET code as an output parameter?
This works:
WHERE ltrim(str((DATEPART(yyyy, dbo.Media_Tracking_Ad_History.ADDATE))) IN ('2003','2004','2005'))
This doesn't:
WHERE
WHERE ltrim(str((DATEPART(yyyy, dbo.Media_Tracking_Ad_History.ADDATE))) IN (@strYears))
@strYears will work if I only pass a single value such as 2003. I've tried every combination of single and double quotes I can think of to pass multiple values but nothing works. Any suggestions?
Hey huys, I got this stored procedure. First of all: could this work?
--start :)
CREATE PROCEDURE USP_MactchUser
@domainUserID NVARCHAR(50) ,
@EmployeeID NVARCHAR(50) ,
@loginType bit = '0'
AS
INSERT INTO T_Login
(employeeID, loginType, domainUserID)
Values
(@EmployeeID, @loginType, @domainUserID)
GO
--end :)
then I got this VB.Net code in my ASP.net page....
---begin :)
Private Sub matchUser()
Dim insertMatchedUser As SqlClient.SqlCommand
Dim daMatchedUser As SqlClient.SqlDataAdapter
SqlConnection1.Open()
'conn openned
daMatchedUser = New SqlClient.SqlDataAdapter("USP_MatchUser", SqlConnection1)
daMatchedUser.SelectCommand.CommandType = CommandType.StoredProcedure
daMatchedUser.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@EmployeeID", SqlDbType.NVarChar, 50))
daMatchedUser.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@domainUserID", SqlDbType.NVarChar, 50))
daMatchedUser.SelectCommand.Parameters("@EmployeeID").Value = Trim(lblEmployeeID.Text)
daMatchedUser.SelectCommand.Parameters("@domainUserID").Value = Trim(lblDomainuserID.Text)
daMatchedUser.SelectCommand.Parameters("@EmployeeID").Direction = ParameterDirection.Output
daMatchedUser.SelectCommand.Parameters("@domainUserID").Direction = ParameterDirection.Output
SqlConnection1.Close()
'conn closed
End Sub
---
If I try this it doesn't work (maybe that's normal :) ) Am I doing it wrong. The thing is, in both label.text properties a values is stored that i want to as a parameter to my stored procedure. What am I doing wrong?
I am trying to supply a bit type parameter to a stored procedure. This is used to update a Bit type field in a table. The field is called PDI
The syntax I am trying to use is:
MyStoredProcedure.Parameters.Add(New SqlParameter("@Pdi",SqlDbtype.bit))
MyStoredProcedure.Parameters("@pdi").value = -1
When I do my ExecuteNonQuery I get error 8114
What am I doing wrong?
Hi all,
this is an easy one for those who know.
Why do you use two '@' symbols in front of a variable in a stored procedure?
Thanks
Tryst