after upgrade sql from 6.5 to 7.0 , there are some new system
table in system database , all are begin with sysremote_....
such as sysremote_tables, i can not find any information about
them , does anyone know what these tables for and whether
these tables will affect the new sql7.0 application database ?
thanks in advance .
regards
zg
Has anyone seen this error? It comes up when my app executes a select statement via linked server (from MSSQL 2000 to 2005) the second time it runs. It's basically a timed poll of tables in the remote database. It works once but the second time it executes I get the error from the remote db, it's just a select but I guess the cursor is still open so it can't run again. After the exception the select will run again, once and it just repeats. I have researched it a little and it looks like it mostly has to do with the isolation level of the transaction. Unfortunately based on the componet being used to access the database I don't beleive I have the ability to use transact SQL to call the isolation level (s) listed.
Here's the weird part though, at another site the same scenario is running fine. Same primary and remote db versions of MSSQL as well as the application and it runs fine. I guess my question is what type of setup parameters that may be defined in MSSQL 2005 for the remote database might make it behave in this manner in one instance and not the other? TIA in advance for any thoughts/assistance.
DT
Hi,I have a few things on my databases which seem to be neither true systemobjects or user objects - notably a table called 'dtproperties' (createdby Enterprise manager as I understand, relating to relationship graphingor something) and some stored procs begining with "dt_" (some kind ofsource control stuff, possible visual studio related). These show up whenI use"exec sp_help 'databaseName'"but not in Ent. Mgr. or in Query Analyzer's object browser, and also notin a third party tool I use called AdeptSQL. I am wondering how thosetools know to differentiate between these types of quasi-system objects,and my real user data. (This is for the purpose of a customized schemagenerator I am writing). I'd prefer to determine this info with systemstored procs (ie sp_help, sp_helptex, sp_...etc) but will dip into thesystem tables if needed.Thanks,Dave
View 1 Replies View RelatedSure, the subject line seems easy enough. But is there a way that I can run this tool against my local SQL 2k5 server and script out the objects it creates to try and set up the tables and what-not on a remote server that doesn't accept remote connections? Or is there maybe a pre-built script somewhere that you can point me to?I've tried to grab the stored procs and tables under the aspnet schema and script them out but it's not working correctly. Still can't run my login form against it. Thanks
View 2 Replies View RelatedHi
I'm developing a tool to deploy the CLR objects from any where to the server
But I'm unable to deploy from remote system to the server.
I'm getting the error like
CREATE ASSEMBLY failed because it could not open the physical file 'D:WorkingDBS2005V2GLGLREPORTSDBS.GL.RM.SQLinDebugsample.dll': 3(The system cannot find the path specified.).
when I try to deploy using
EXEC dbo.sp_executesql @statement = N' CREATE ASSEMBLY [DBS.GL.RM.SQL]
FROM ''D:WorkingDBS2005V2GLGLREPORTSDBS.GL.RM.SQLinDebugsample.dll''
WITH PERMISSION_SET = SAFE'
can anybody tell how to generate assembly_bits for assembly
the VS.NEt is generating assembly bits instead of physical path to deploy the assembly on the remote server.
as
CREATE ASSEMBLY [sample]
AUTHORIZATION [dbo]
FROM 0x4D5A90000300000004000000FFFF0000B800000000000000400000000000000000000000000000000000000000000000000000000000000000000000800000000E1FBA0E00B409CD21B8014CCD215 ..
WITH PERMISSION_SET = SAFE
But nothing is provided reg this in MSDN.
will u help me in handle this please
Thank u
I have to access the remote system folder files in local machine using SSIS.
View 2 Replies View RelatedDoes anyone know what system tables are used when a sp_spaceused is executed?
Thanks in advance
I want to get rid of systemtables or systemstored procedures which displays when ever i creat new database.
How can I get rid of system tables ?
Hi All
I want to know where I can find Object permission detailes, For example
I have table1 and user "abc", I have given permission to user "abc" for table1 to "SELECT" "INSERT", "UPDATE", I want to know where this detail is stored in system table. I was looking at "SYSUSERS","SYSLOGINS",
"SYSPERMISSIONS", "SYSMEMBERS", "SYSOBJECTS" I couldn't find anything, If some one can post your answers that will be great.
Thanks in Advance
Regards
Ram
Hello,
I have succesffuly BCP out system tables(sysdatabases, sysdevices, syslogins, and sysusages). Now I want to BCP those same tables IN to create devices, databases and so on using the BCP utility. I run the same command used to BCP out and only changes the OUT to IN but it did not work.
Can somebody whose done this before tell me how to do it.
Many Many thanks,
Ana.
Where can I find a discussion of how to interpret the keys1 and keys2 columns of the sysindexes table? These columns are binary(255) and are supposed to contain a description of the columns to which the index applies. I also need to know how to interpret the status column of the sysconstraints column.
View 1 Replies View RelatedHello,
I've one Sybase DBA asking this question, Is this really true, Pls help me.
Due to architectural changes in SQL Server 7.0, you cannot dump the transaction log if a database's system tables are inaccessible (due to media failure, for instance)in 7.0 and later versions. Microsoft recommends that separate devices be used for system tables and user tables to allow a final log backup to take place in the event the data device is inaccessible. The additional exposure incurred by not doing this is possible loss of data for the interval between the last transaction dump and the point of failure.
Thanks
Qinglee
Hi Gurus,
select * from sys.server_principals is not working for me on 2000 SERVER.
This works fine on 2005 SERVER..
Where Iam going wrong ..please advice..
Thanks,
ServerTeam
Hello all.
can anyone advise me where I can find a relationship diagram for the system tables in SQL Server2000.
Thanks all.
Hi,
I'm doing an impact analysis to see what views / stored procedures etc are impacted by a change to columns in a table.
I'm using the system tables to identify these changes, and it is something that I'll have to repeat across all our databases in case the tables are being accessed from elsewhere.
I'd like to make sure I'm doing it the right way so could someone point me in the direction of a good article or code for doing this.
thanks
Sean
I dont want to see these at all and cannot find where tospecify a view or modification of a view. can someone throw me abone here and tell me where to make the adjustments if I can make themat allMichael
View 2 Replies View RelatedHello,
I have created a linked server XYZ that is linked to server ABC. I am tying to view the tables via XYZ but I'm unable to do so. I can only see the system tables. When I run a select statement, I get the correct results. That means I have the access to the tables, yet why am I not able to see the tables.
Please assist
Hello,
Is it possible to:
Add a system table using smo (or at all)?
Add new rows to a system table?
Thanks,
Assaf
Hi everybody:
I am working on a query that referrences a table in a remote database. It seems in Management Studio 2005 anytime you open a new query window you should connect to a specific database instance that's why when I refer to the remote database table using Fully Qualified Name it tells me the database name is unknown.
Do you have any solutions for this??
Thanks a lot
In SQL mngt studio...what is the system tables folder in the tables folder supposed to be used for? Do I need to use it for anything?
Gater
Hello,
I've one Sybase DBA asking this question, Is this really true, Pls help me.
Due to architectural changes in SQL Server 7.0, you cannot dump the transaction log if a database's system tables are inaccessible (due to media failure, for instance)in 7.0 and later versions. Microsoft recommends that separate devices be used for system tables and user tables to allow a final log backup to take place in the event the data device is inaccessible. The additional exposure incurred by not doing this is possible loss of data for the interval between the last transaction dump and the point of failure.
Thanks
Qinglee
HI all,
I need to understand a little bit more about SQL Server built in tables. For example in Oracle if I need to check for tables names under one database. The query will be something like this:
Select table_name from user_tables;
Or to get column_name and table_names:
Select column_name, table_name from user_tab_columns;
How can I do this in sql server 7?
I know there is a table called sysobjects. The sysobject will give me all the objects in the database but how can I specify wether its a table or a column. More over can someone refer me a good book for sql server 7. Both development and administration.
Thank you in advance!!!!
I need to keep track of changes (delete/modify) in sysusers table. SQL Books Online mentionend that SQL Server 7.0 doesn't support trigger on system tables. What options do I have?
LT
Is there anyway to hide system tables in a database so that only user tables are viewed?
Gary
Is there any way to get the DTS Wizard to see the system tables (sysjobs, sysjobschedules, etc..) in the MSDB or Master database?
View 2 Replies View RelatedHi everyone,
I've recently installed MSQL Server 7.0 Standart Version and every time I create a new database, system tables are created and are visible also. That means, I instantely get 18 tables, 20 views, 18 stored procedures and so on. Can I hide them??? I mean, my tables are all mixed with the system tables. If I can hide all the system tables and views and so on please tell me! Thanks.
I'm thinking of building a trigger against a system table(sysobjects) in
database(a) on server(a) that will assist me in updating a table in
database(b)on server(b). What I need to know from table(b)is if a new table
has been added and removed from database(a) on server(a). I want to use a
store procedure to query the table(b). I was thinking of building a trigger
against my sysobjects table that would update table(b) whenever any tables
are added or removed from database(a). Has anyone built triggers against
system tables? I am running SQL 7.
Does anyone know how to get the row count of a user table by using the system tables.
There is no guarantee that these user tables will have any indexes - so I can not use the sysindexes table to count the rows in a clustered index.
Is there another way?
I can't see the system tables when I try to pull them up in a linked table view from ACCESS or in a VIEW in SQL Server. I can't adjust my permissions to make them appear in any way that I have tried. Do you know how to do this?
View 1 Replies View RelatedHi,
Is there a way to hide the system tables on EM?
Thanks
does anyone know how sql 2k stores whether a column is an identity column? is it in any system tables or information_schema?
i've read that i can't find the next value of the identity, which i find weird. I just want to know if the column is an identity or not.
Thanks in advance.
Hi,
Anyone plz do tell me what s the query to see the text content of stored procedure from system database tables..
from which table we get the content of sp
Thanks & Regards
ARV
Where can I see system tables in SSMS?
------------------------
I think, therefore I am - Rene Descartes