Server: Msg 1105, Level 17, State 2, Line 2
Could not allocate space for object '(SYSTEM table id: -276436763)' in
database 'TEMPDB' because the 'DEFAULT' filegroup is full.
this error occured during dbcc checkdb the total size of the file we are
doing on is [81GB].
what is the next step we need to take
we increased about 3699.mb in temp db
overall we have 8 databases in our server
I need to load a table with 820,000 records from a Sybase db via DTS. It always fail with the error: "Error at destination for row number 820000. Could not allocate space for object in tablespace tempdb . The default filegroup is full.".
There is only the primary filegroup defined in the db. I've increased the size from 1.5GB to 2GB, and specify that it shd grow automatically by 10% and there's no limit to the size. There is still some 28GB in the server, so it should be fine.
It still fail so I added another file to the primary filegroup with size 100MB. Again, it failed with the same error msg.
WHERE DO I FOUND THE FILEGROUP? WHEN THIS ERROR OCCURED
Could not allocate space for object '<temporary system object: 431024047390720>' in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.
We are using an application that stores it's data in SQL Server 2005. The application manages the creation of all it's own objects, including indexes. I would like to migrate the index data to a new filegroup, but there is no place in the application to specify how it builds it's indexes. I assume the indexes are created without specifying a filegroup so the default Primary is used. So, I'm wondering if there is a database option somewhere that you can set the default filegroup for index data?
If not, the only way I can think of accomplishing this goal is through DDL triggers to capture Create Index and Create Table statements and overwrite the Filegroup there.
I have around 9 index to a table and when I transfer my table with the help of Import/Export utility I get this error, can any1 tell me, why do I'm getting this error and I don't have help on that.
Error: -------- Error at Destination for Row number 2279. Errors encountered so far in this task: 1
could not allocate space for object 'a_pua01_tblmdlmast' in database dbDev because the primary filegroup is full ---------
DESCRIPTION:Error: 1105, Severity: 17, State: 2 Could not allocate space for object 'iislog' in database 'IISLOG' because the 'PRIMARY' filegroup is full.
I have check to see if the file is autogrow and it is. Is there a way to solve this problem?
i got this error, "could not allocate space for ... in database... because PRIMARY filegroup is full." when i tried to create a table then insert some data approx. 400000 rows with a SP.
Dear All,I am new in MS Sql Server.I am facing a error"'PRIMARY' filegroup is full".I went through the all previoussubmitions.But still this error is coming.Please help me out.I have Installed Microsoft Sql Server 2000. It was working perfectly.Present Database Details========================..mdf size 3.91 GB from Explorer and fromEnterprise Manager Space Allocated 4007 MB------------------------------------------..LDB size 3.79 GB from Explorer and fromEnterprise Manager Space Allocated 177 MB-----------------------------------------Auto Incementation is On-----------------------------------------File Growth in Percentage 10-----------------------------------------Remaining Space in Drive 7 GB=========================But at the time of importing data getting error==========================='PRIMARY' filegroup is full===========================What should be the reason?Thanks in advanceRegardsArijit Chatterjee
I seem to be having problems with a very simple install of MSDE on aWindows 2000 Server. When attempting to add new records, I receivethe message "Could not allocate space for object 'MyTable' in database'MyDatabase' because the 'PRIMARY' filegroup is full."I have dealt with countless issues like this in the past and they havebeen easily resolved due to max limit of MSDE, trans log full, or thehard drive where the database is stored is full. None of these appearto be the case in this instance. The system has been working fine forabout a year.The Master database is 11 MB. MyDatabase is 33 MB. The log files areboth under 1 MB. I have 730 MB of storage available on the drivewhere the database is stored.I downloaded MSDE off of Microsoft's website and installed with thefollowing switches: BLANKSAPWD=1 SECURITYMODE=SQL. I create a userin MSDE that is the DBO for MyDatabase. Other than that, I make nochanges to the default installation.
This is for SQL2k5. The database may be small or big, I don't know (it's going out to multiple customers). I'm wondering if in general it's considered "better" to create a single non-primary default filegroup and put all the objects there, or just leave everything in primary? In one training years back I got the impression that recovering the primary filegroup was important for certain restore operations, so it was always wise to separate them like this.
I am running a copy object DTS and consistently get the error 'cannot allocate space for <objectname> because the primary filegroup is full.
I've got auto-grow on with unliminted growth. There is more than enough space on our Data and Log file disks. I haven't reached teh 32TB limit of the filegroup size by any stretch of the imagination. The source datbase is 250mb yet even when I create the destination DB at 300mb I still get the error!
Also, I tried creating a secondary filegroup and this didn't help, either.
Could not allocate space for object 'dw_MasterClaim_ProcLine' in database 'fl1stDwProd2' because the 'PRIMARY' filegroup is full..
I have two db's prod1 and prod2. I looked at the properties of each. On the tab Data Files both of these have the same file name (prod2). One has 5897 space allocated and the other 13162. Not sure why they are like this or even if it's correct. Could this be my problem? If so, how can I fix?
I have just added a 500G USB drive. I have created a DB on it and am attempting to export data to it. The problem is I keep getting:
Could not allocate space for object 'dbo.Matched' in database 'MyDBK' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup
The drive is empty so there is plenty of room. How do I set auto gro or something so this error goes away?
I am getting below error while importing data in SQL 2005 Express:
"error 0xc0202009: Data Flow Task: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Could not allocate space for object 'dbo.HistoryLog'.'PK_HistoryLog' in database 'HistoryData' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.". "
I keep getting the "primary filegroup is full" error when ever I try to write data even though the following things are true:
allow unlimited growth set for BOTH database and transaction log auto shrink and auto update statistics flags are set in database options growth set to 10 percent for both database is 4GB but disk has 12GB freespace transaction log is on same disk but is only 8MB ???
SQL shows the database has 2% free space but any attempts to write cause the error, shrinking drops this to 1% but still produces the same error on writes
SQL shows the transaction log has 90% free space
backup maintenance plans are in operation for both transaction log and database (write to different drive)
Msg 1105, Level 17, State 2, Line 1 Could not allocate space for object 'dbo.SORT temporary run storage: 162781324115968' in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. Msg 9002, Level 17, State 4, Line 1 The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
hi , i m loading huge data like more than 50,00,000 records using BCP utility after ends the process i received the following Error .
SQLState = 37000, NativeError = 1105 Error = [Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object 'BMIS112003' in database 'MY_DB2' because the 'SECONDRY' filegroup is full.
Although I’ve created new filegroup ('SECONDRY' )in drive D:/ that have 10 GB of free Space , then i create table ('BMIS112003' ) using 'SECONDRY' filegroup.
Primary Filegroup created in C:/ that have 1 GB free space.
I am getting the below error message while performing Bulk Insert/Update operation.
Could not allocate space for object 'dbo.pros_mas_det'.'PK__pros_mas__3213E83F22401542' in database 'admin_mbjobslive' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.
My Current SQL Server version :
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (X64)  Apr  2 2010 15:48:46  Copyright (c) Microsoft Corporation Express Edition with Advanced Services (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)Â
My current database size crossed the limit size of 10 GB.
Im not too sure if this is the category to post this...but what value can I pass in the CONTAINS method that will behave like the "*" character in a SELECT query?
I got a message that 'Could not allocate space for object '(SYSTEM table id: -732777483)' in database 'TEMPDB' because the 'DEFAULT' filegroup is full. Connection Broken'
I have a DB creation script which starts with the following lines
EXEC sp_addrole 'RAVENROLE' go IF NOT EXISTS (SELECT * FROM sys.database_principals WHERE name = N'USER1') CREATE USER [USER1] FOR LOGIN [USER1] WITH DEFAULT_SCHEMA=[USER1] go IF NOT EXISTS (SELECT * FROM sys.schemas WHERE name = N'USER1') EXEC sys.sp_executesql N'CREATE SCHEMA [USER1] AUTHORIZATION [USER1]' GO EXEC sp_addrolemember 'RAVENROLE', 'WS-NOLANKTFSBUILD2'
Basically what I am doing is creating a role, then adding user USER1 to it. The problem is USER1 has full update, insert etc. permissions on all tables in the database by default. Even when I deny that user permissions they can still update, insert etc.
I am using Windows Authentication, User1 also exists as a windows user.
How do I ensure that User1 has no permissions by default? I want to be able to explicitly add them.
I want to allow a user to only select from certain tables in a SQL 2005 database. Without granting any permissions, the user can select from any table.
All tables are owned by dbo. I am using a Windows login and it is not a member of any groups other than one to allow Terminal Server logins.
SQL login properties: Only server role is Public Mapped to a user with the same name Default schema is dbo No securables listed
User properties: No owned schemas No role memberships No securables listed
Database permissions: Under explicit permissions, this user is only granted Connect Effective permissions lists everything!!!
Where are these effective permissions coming from? TIA
When the SSISDB database is created, it appears to be using the "Full" recovery model by default. Because of the recovery model, the SSISDB transaction log needs to be regularly backed up or I risk running out of disk space.I would like to set the recovery model to "Simple", so that I do not need to worry about the transaction log consuming too much space. However, I am not sure what the consequences of that action are.features lost by switching the recovery model of the SSISDB database from "Full" to "Simple"?
I'm either missing something or this is a bug. I have a Lookup that finds no matches if I use the default option of full caching (everything on the Advanced tab unchecked). The lookup table is relatively small (15348 bytes) in only 544 rows. If I check only the Enable Memory Restriction box and eliminate caching, it works fine. I can also check the Enable Caching box and accept the default cache size of 5MB and it works fine. Anyone have any ideas? I'm running on Standard Edition, SP2.
I have sql server 2000. I copied a database from one server to another. I have one table that has a full-text index. When I transferred over the database, the index still existed, but was not populated. I made sure the path for the file is pointing to a new correct location. I did "start full population". It only populated one entry @ 1MB. On the old server the index is 100MB with more than 3 million records.
I tried rebuilding, re-creating, and it all works, but when I run "start full population", it only populates 1 record. I double checked the table in question and it has over 3 million records and proper primary key.
hello, ihave atablelike this - z uniqueidentifier a varchar(40) b varchar(40) c varchar(40) d varchar(40) e varchar(40) f text g image
I am asked to split this table into 2 filegroups and move text and images on to one and other stuff on one. I am new to MS-SQL 7.0. Can anyone suggest me how to go for it. Thanking you.
i understand that the filegroup for a table can be specified in the CREATE Table statement. just out of curiosity, is there any way to move a table to a different filegroup, that too, if the table contains data.
Hi, There is a table which is about 50GB is size. I am thinking of placing the database of this table into a separate .ndf on a separate drive on the server. Is it possible to place this particular table into a searate drive to increase the performance even more? Basically my question is: is it possible to place tables into separate .ndf files? Thanks
Hi, I have created a database with two filegroups called FG_GroupData, FG_GroupHistory. FG_GroupData is set as default. FG_GroupData contains two secondary data files i.e. GroupData1.ndf and GroupData2.ndf I can create a table so that it is stored in FG_GroupHistory. i.e. CREATE TABLE dbo.OrdersHistory ( OrderID int NOT NULL, ProductID int NOT NULL, CustomerID int NOT NULL, UnitPrice money NOT NULL, OrderQty smallint NOT NULL ) ON FG_GroupHistory Questions: 1) How do I add tables to each .ndf file inside a group i.e. FG_GroupData For example, how do I add a table to GroupData1.ndf and one to GroupData2.ndf ? 2) I guess there is no need to place the file name i.e. .ndf inside the select query Thanks
What is the advantage of having two secondary files inside a filegroup. For example, I can create a table and place it inside a filegroup which obviously will use the secondary files. Not sure why some DBAs create just one but otherscreate more than one secondar files in a filegroup. I have read the booksonline but can not figure out the advantages. Thanks
Can anyone show me in SQL7 how to obtain Available Space on a particular filegroup in a database (not the database or datafile). I am trying to include this in a script to monitor my database which uses Filegroups and I have every other info that I need (from the sysfiles table) except the available space. Thanks in advance!
