is there a way to convert administrative accounts on 8 of my PCs into normal accounts?
Without registry or gpedit.msc access.
But they are currently the only administrative accounts on these PCs.
I want the data in My Documents and Desktop to remain as it is for these accounts.
If I boot normally, all three accounts, including the built-in Administrator account become Standard accounts, even though they were all setup as Administrator.
If I boot to Safe mode or Safe Mode with Networking then they all are Administrator accounts.
Right now I'm running Windows Repair All-In-One. Will see if that works.
This computer also boots to a black screen two out of three times (not always though, sometimes more, sometimes less.). If WRAIO doesn't do the job I'll tray a Refresh. If no joy there then I'll clean install. I have a good Macrium image backup so won't lose anything no matter what I do.
I wanted to disable login password to I ran netplwiz and unchecked that requirement. It worked, but now when I turn on my computer, it says my password or username is incorrect. I click ok and it gives me two "users" on the lower left hand corner. I choose the correct one and enter my password and windows starts. But I have only one user administrator! I'm usi
View 1 RepliesThis is a thing that was also on 8.1 (that I hated a lot) and i couldnt remove. I have 2 accounts on my pc (home and my own account) and everytime i turn the pc on, the last account that was used logs in automatically (mine asks password actually, but the home's one doesn't, so it just logs in).
This is a thing i hate, since makes me waste time login out and login with the account i want to use. Is out there any option for disable that? In 8.1 that wasn't possible.
I am having an issue with the Windows 10 machines that I have installed thus far. I do not use a screen saver, but use the power settings to turn off the display after a certain period of time. When the display goes off, it forces me to authenticate to get back on the computer. I have tried to shut off the screensaver, check, than uncheck the box for "On resume, display logon screen". No matter what I do, I cannot get this to NOT make me authenticate when reawakening the display.
I do run a domain at my house for background info. Been working on this for a few days now with no real progress.
I have several user accounts on one machine under Windows 10. I would like to re-log-into these user accounts when the machine reboots from an update or from an extended (longer than UPS hold-up) power failure.
I use Thunderbird and have a lot of junk filtering going on which protects my phone from most spam.
I will be moving my two sons to Dropbox and back their stuff up to my NAS units continuously rather than intermittently.
For these accounts, I want the users' accounts to boot when the machine boots so that Dropbox is making a copy to the local HDD. The NAS units take it from there (final sync method TBD).
In no instance do I want a "live" console.
After I automatically log into the accounts, I want the machine left as if I had hit "switch user" after logging into each account--several accounts active and running, but the console waiting for a login.
I have been testing this in principal where I copy images from a friend's Dropbox to her Google Drive and to my NAS units. Right now I have to manually log into the account that does this after each reboot.
For my account, I also wish to start Thunderbird as well as log in. I assume just adding Thunderbird to the StartUp group will work?
C:UsersRichardAppDataRoamingMicrosoftWindowsStart MenuProgramsStartup (courtesy of
How to Add Programs, Files, and Folders to System Startup in Windows )
I am in the process of bringing 20 machines from W7 and W8.1 to W10. Seven down, thirteen to go. five of the twenty are W8.1, the rest W7.
Since yesterday, I'm unable to switch between user accounts. Button changes from white to blue when hovered, but no response to click.
View 1 RepliesIve upgraded from Win 8 to Win 10.
I had 2 adult local accounts and 2 kids local accounts. I also have the 1 Microsoft account.
I don't want to use the Microsoft account signin on my laptop I want to use my local.
Is there a way to assign the existing local kids accounts to family without having to create new ones ? The kids are worried that if I do this they will lose their existing apps/game settings on the local accounts.
I don't know if it's my installation, but I can't really switch to select a differet login user once I turn on my PC, and it brings to the last logged on user and his Picture password screen.
Both users have a Picture password and I don't have any chance to pick the other one, unless:
- I select a different type of access
- ask for password
- then the damn multi-user LH box appears
- and I can pick another one.
Then do the opposite until I get back to his Picture password screen. Odd and unbelieavable, considering how well streamlined in Win8.1...
The old way I found for Windows 8.x (HERE) is not working anymore, as I went in the Registry of mine upgraded Win10 and found it was already correctly modified (=1), but the login screen is a mess, nonetheless.
I'm ok with Task scheduling batches, reg modification, whatever. But it's Win10 Home, so no gpedit involved..
(it's a Dell Venue 11 Pro)
W10 Pro install. If you go into Settings, Accounts, it does not load.
View 9 RepliesI've got two computers running windows 7. Both have an administrator account and a standard user account. The computer I use for gaming has a third account for gaming (I have some older games that don't like the aero-peak feature so the gaming account uses a plain desktop, no features.)
All these accounts use the same email address.
All these accounts will also use just the one Microsoft account.
My question is, when I upgrade to windows 10, will I be able to create a similar set-up for the user accounts, ie 5 different accounts, but only one email address and one Microsoft account? I've read that windows wants an email address to create a new account, is it going to tell me "that email address/Microsoft account has already been used?"
I am planning to upgrade to windows 10 by doing a clean install and starting from scratch, so I'm not worried about whether or not the existing accounts will transfer over.
My windows (hotmail) account was recently hacked, and is irretrievable. I have created a new windows account, but my windows 10 user is associated with that old account that I no longer have access to.
View 2 RepliesAfter the latest big Windows 10 update today, I see two user accounts have been created, namely "Default" and "Default.migrated" Neither existed beforehand. They both contain quite a few folders and subfolders which at the bottom level are all empty. Can I safely delete these accounts?
Previously I had all Public Folders from the Public Account set to locations off my SSD, now they have been recreated on my SSD and I can't move them apart from "Public Account Pictures" as the option to relocate them is not present even though Windows says they can be relocated - see screenshots.
Can the Public Account be deleted without consequence - I never use it!
I installed windows 10 from 7 and if i try to sign into cortana, onedrive or microsoft accounts it either say (something went wrong) or (there was a problem connecting to onedrive) Browsers work fine so i know i have an internet connection. I have reinstalled windows 10 once with no change.
View 8 RepliesI notice in my User Accounts I have the same User Name twice. Actually it is the same email address twice. Both are administrators under Group. can I remove one of those without having my computer going into meltdown.
View 9 Repliesmy email is there as is my dad's email, says accounts used by other apps, but my dad never uses apps on my computer, so I'm not sure why this is here... and can I remove it?
View 1 RepliesI have Windows 10 & it just asked to update so I allowed it. Now when my computer restarts, everything seems to work fine, until I get to the sign in screen where it says "please wait" and I get an infinite loading screen.The only thing that works is ctrl+ alt + delete and it gives me this. Still no accounts to sign into. I've tried holding shift + restart but it doesn't seem to do anything. Shift + F8 also does nothing during startup.
View 6 RepliesI have 2 accounts, one admin...and one standard (as recommended by Microsoft) Can I link them both to the same Hotmail (outlook) email?
(Standard account used daily...admin account rarely used and there for security I currently have each linked to a different email account but since the admin account is rarely used I'm worried that the email account associated with it might get killed off because of lack of use. If you want to be super kind....is it easy to change the email that a user account is linked to?)
Using win 10 home edition.
"Security policies on this computer are set to show info about the last interactive sign-in, but Windows couldn't retrieve that info. Contact your network administrator for help."
EDIT: I logged into Safe Mode and used the Group Policy editor to change "Display information about previous logons during user logon" from Not Configured to Disabled.
I also ran 'gpupdate /force' in CMD.
Not sure which one worked but it's sorted now.
This is my main PC where everything is set up as I want it (apart from a Start Menu App issue but that's another story), I have just added my account (that is on this PC) to my wife's laptop, I've entered my Microsoft log in and password.
I was on the understanding that all the Apps and settings from my main PC would migrate to the laptop, this has not happened which seems pretty useless to me.
My theme and favourites have migrated over but not the apps, if this should work or Is it another Windows 10 failing?
I use the 4 digit PIN login for Win 10. In the past, I would get the small 10 digit number keypad when I touched the PIN input box on the logon screen. Lately, on all my devices, the small keypad has been replaced by the full on screen keyboard when I touch the PIN input box on the logon screen. I've found a number of folks with the same issue, but no resolution.
View 2 RepliesI have removed all my accounts using "netplwiz" option. Now my user name stayes on when I turn on my computer but no password is correct. I can't log in on my computer. I changed my password on live.com but eaven that doesn't work.
View 1 RepliesI have 4 accounts on my Surface 3 (running Win 10 preview 10565) My main, My alt oldest, son, youngest son
The first 3 use Age of Empires: Castle Siege. Last night all 3 worked fine. This morning I can only get it to work on my main. On both my alt and my oldest son's account the app starts to load, then crashes within a second or two. Lately it won't even load when I click the tile.
I've uninstalled and reinstalled with no luck.
I installed in on my youngest son's account just now to check and it works.
The live tile on the non-working isn't even responsive. I have to go into the list of apps to uninstall.
When I reinstall, the 377 MB progress bar starts at zero, moves to 3.X MB, then jumps to finished.
It doesn't seem as if it's fully uninstalling. I went into user > account > appdata > local and deleted the Microsoft_AgeCastles (or however it's phrased) folder, but the reinstall afterwards still didn't work.
Where can I go to scrub all the app data in case it's not actually taking everything with it when I uninstall?
I have a Laptop (Windows Home 10) and a Desktop (Windows 8.1 home) and I want to enable Administrator on both. I have used all of the suggesting about this I got on the internet and nothing works.
View 7 RepliesI have encountered many problems to come as I learn Win 10. The first of which is how can I change or edit the administrator's name on my PC. I thought like win-7, I could edit, change, or even turn off password protect.
I find no way to do this, as I'am the only one using my PC, I do not need to sign in with a password every time I fire my PC up. Normally I resort to system restore for most problems, however I don't think that would work in this case.
I just bought a new lap top with Win 10. I have a lot of experience with XP and Win.7 but with 10 I'm a dummy. How can I get it to open and skip to the desk top?
View 3 Replies
