BSOD :: Automatic Repair Loop Ended In Monitor Going To Permanent Sleep Mode

Oct 5, 2015

I upgraded to Win10 about a month agn Friday my pc was stuck in the Automatic Repair Loop. I tried alt+ctrl+del no result. I reboot and pressed F10 the monitor went to sleep mode. When I pressed the on button on the monitor, the Monitor Status reads as follows:

DVI: No signal
VGA: No signal
Auto Switch Source: on
Default Source: DVI

At a point in time, a msg appeared saying "check video cable" so I used the VGA cable on two different ports no success. I bought a DVI-D cable and used it still the monitor is in sleep mode

View 1 Replies


Similar Messages:


BSOD :: Stuck In Automatic Repair Loop

Aug 7, 2015

I have upgraded from windows 8.1 to Windows 10 The upgrade went well and i was able to use my computer initially. After i restarted my computer, i am stuck in Automatic repair loop.

I have downloaded a copy of windows 10 iso image and made a windows 10 USB boot drive. I tried repairing the startup issue as suggested in some of the forums but no joy.

Its a new PC setup three months ago. Sad there was no hardware or app compatibility check before upgrading.

Config: Intel I7 with 16GB RAM. dual boot with Ubuntu

View 10 Replies

BSOD :: Put Into Sleep Mode And Now PC Is In Power Loop

Sep 1, 2015

I installed windows 10 about a week ago and all was working fine until I decided to try sleep mode a couple of days ago. I activated sleep mode but noticed after powering off that my PC was turning back on for a few seconds before powering back off in a loop. I didn't think to much of it and powered it off at the wall thinking that would clear any sleep errors. Well I've come back to use it after a couple days and it's still is stuck in a power loop of starting for 3 or 4 seconds before powering back off again in a continuous loop!

No chance to go into the bios, no sign of windows, just an endless power cycle!

View 4 Replies

Automatic Repair Loop

Sep 21, 2015

I'm trying to resolve an issue with a Windows 10 desktop, HP small form factor purchased with OEM Win 7. Windows Update suggested Windows 10 and now the machine boots to the automatic repair screen but there is no mouse or keyboard function where the option panes appear.

While I did purchase the computer myself originally, it was purchased for the use of my church group, and two weeks ago came under the care of my co-deacon and friend. So, let's just say there is no recovery media now for Win 7 or Win 10. I can create a recovery disk here at home from one of my local Win 7 systems, but not sure if that will work or not.

I'd be perfectly happy to un-install Win10 from the machine, but there doesn't seem to be a way to get to the recovery partition... all F-key options have been tried.

This is a Core Duo processor.

View 2 Replies

Automatic Repair Loop?

Nov 1, 2015

So when I'm trying to log on, my computer does the whole automatic repair thing, but constantly loops. Now, I know this has been notified before, even for windows ten, but it seems I just can't fix it. All the solutions on the articles I've seen don't seem to work .

View 6 Replies

Preparing Automatic Repair Loop

Sep 30, 2015

Recently I got a new gaming PC which came with windows 7. The day after i upgraded to windows 10 and it was working fine. Yesterday i was using my PC and then the task bar disappeared so i decided to restart the computer to try and fix it. When the computer turned on again it went through the normal startup process but when it got to the windows logo it said preparing automatic install and then kept looping through startup and the windows logo. I have tried doing the system repair but when I press F8 nothing happens, so right now all i can do on the computer now is access the BIOS.

View 3 Replies

Stuck In Automatic Repair Loop

Dec 8, 2015

have an Asus Laptop running Win 10, upgraded from win 7. While reading one of the many links from Facebook, using Chrome as a browser, I got a popup that looked like some kind of ransomware . The popup would not close so I turned off the computer.

Now when I turn the computer on it flashes the Asus logo. Then “preparing automatic repair”, “diagnosing your computer” followed by “repairing your computer” appear. It then tells me that the PC did not start correctly and gives me the option to restart or advanced options. Restart brings me back to this point.

Advanced options gives me three options, Turn orr the PC that does that, Exit and continue to Win 10 that gets me back to the previous step or troubleshoot. Trouble shoot gives me the options to reset or more advanced options.

Reset is either a partial or full removal and reinstall or windows. I have some academic software that I do not want to lose if possible and in any case do not have any media to do a Windows reinstall.

The advanced options gives me six choices.

1 System Restore, but there are no restore points found.
2 System image recovery, but I do not have an image disc .
3 Startup repair, starts the process all over and does not find the problem.
4 Command Prompt, appears to open a working command prompt.
5 Startup Settings, Gives me a non clickable list of options but just continues the loop.
6 Go back to previous build. It warns me that I may lose apps and any changes I have made, but not my personal files.

The System is an ASUS laptop, X54C, made in 2012 with Widows 7 Home premium updated to win 10. I have no other access to the computer.

View 6 Replies

Preparing Automatic Repair Loop - Resetting PC Failed

Oct 24, 2015

I have had this loop for 4-5 hours now, and I have not found any fix for it. I am using build 10240. I have tried reverting back to windows 7, and that failed. Tried start-up repair, that failed. Tried system restore and image recovery, those failed too. Even resetting my pc has failed. I have tried cmd commands, and those also failed. I have upgraded to windows 10 via online from Windows 7, and I do not have a disk or another computer to work with. Nothing has even caused this issue. I just booted my pc like any other day and I was sent into this loop. I have a Gigabyte USB 3.0 powered motherboard.

View 9 Replies

Avast Uninstall Resulted In Automatic Repair Loop

Aug 20, 2015

So I thought I'd try out free version of Avast. Well, after few weeks of getting rocked by popups, I uninstalled it(from programs and features) and rebooted it, thinking life is good now. Hell naw it ain't good now, not at all.

I'm stuck in Automatic Repair loop. Windows attempts to auto repair, tells me my PC didn't start properly, does not boot to safe mode, does not find any restore points, fails to "Startup Repair" and is unable to "Reset this PC"

In command prompt that I can open in that cute lil blue metro interface I get following:

1. Disks are there and volumes are healthy(tho volume letters are wrong my os SSD is D: and storage HDD is C: )
2. sfc /scannow tells me that there is a system repair pending which requires reboot blah blah fml
3. dism ran against D: with /Cleanup-Image /RestoreHealth fails with logs containing few errors(among tons of info logs):
*Error creating registry mapping:COMPONENTS - CIfflineRegistry::Init
*Failed to mount the remote registry
*Failed to set the windows directory to 'D:Windows'
4. dism ran with /revertpendingactions gives me same errors in logs as above

that's pretty much it. So is my registry completely screwed?

View 4 Replies

Reboot Loop / Cannot Open Automatic Repair And Can't Run Setup From USB

Jun 13, 2015

I was running the Win 10 build 10074, in the slow ring. I left it unattended for update, which included the newer build 10130. Before leaving, it was at 99% downloaded. When I returned after 30 mins, it was stuck in an endless restart loop.

It restarts within 2 seconds of displaying the Windows logo, when I try to boot from the HDD. If it goes into Automatic Repair, it shows "Starting automatic repair" under the logo and restarts after some time.

But the worst thing is that the same problem occurs, Even if I try to run Windows 10 setup/repair from a USB drive!! (build 10130). It just reboots a few seconds after showing the logo, even when I removed the HDD. I am totally stuck. I am currently running Ubuntu from a USB drive, which is working just fine.

I am not sure what happened in my absence, though it's unlikely that the newer build was installed in just half an hour. The only idea thing that I can think of and have not tried is to try running an earlier build or version from the USB drive.

View 4 Replies

During Startup Automatic Repair Launches - Stuck In Reboot Loop

Mar 27, 2015

During startup automatic repair launches, restart ensues, that's the loop. The error mssg is WDF violation which it seems is related to iTunes. I just can't get out of this loop to do anything about it. I don't have a boot disc. Safe mode is what I would like, but that doesn't work.

View 8 Replies

How To Get To Safe Mode When Having Auto Repair Loop

Jan 10, 2016

Obviously I can't click on anything or type anything because the loop is constant. I've been reading forums etc for the past couple of days for a fix for this Automatic Repair loop..nothing that would work and I notice many others the past year also never found a solution.

I burned on a dvd a Windows 10 bootup thing- as suggested by someone. That doesn't stop the loop either- and yes, I did get to the page via F12 that allows to change it to boot from the DVD etc.

View 9 Replies

BSOD :: Error 0xc000021a And Continuous Repair Loop

Nov 24, 2015

Blue screen and error 0xc000021a and the continuous repair loop

DESKTOP-9LUS32E-Mon_11_23_2015_225843_17.zip

systeminfo.txt

View 9 Replies

BSOD :: Repair Loop Critical Process Died

Sep 4, 2015

Firstly, I can't generate the dumpfile as I can't access windows at all. I can't access it through any boot options including safe mode.

I've recently upgraded from Windows 7 to 10 through the microsoft updater.

The only major thing I did before this happened was installing the AMD CCC and rebooting, which caused this loop. I actually reinstalled it as switchable graphics wasn't working.

Things I've tried - 1. Automatic Repair - doesn't work. txt file in srt folder says the OS version is not compatible even if I use the Windows 10 usb.

2. chkdsk /f /r - it fixed a bunch of things, there seemed to be a lot of problems but now it says that there is no problems and no further action is required.

3. Fixing and rewriting bcd files - This was the interesting part because my computer some how changed the C: to D: and created a new C:. I've reassigned it so that original C: is renamed back to C: and removed the new C: partition which only had the boot files in it and reformed all the bcd files in original C:

4. I can't run sfc /scanow. It doesn't work with any commands I found over the internet.

5. Other things I found were that if I tried to reset the computer while keeping the files, it doesn't allow me to do it. Also, I found out that some of my drivers were missing by using devcon - graphics (both integrated intel, dedicated radeon m6740) some sound cards, single usb driver. Also when I installed thne integrated intel graphics driver through pnputil, when I restart the computer, the driver disappears and comes up with code 28 again.

I don't mind doing a fresh install but only if I am able to access my current hd files and create a backup, which hopefully should be possible because I can access the files through cmd prompt in WindowsRE.

View 9 Replies

BSOD :: Critical Process Died And Disk Repair Loop

Jan 21, 2016

I've been having problems recently with my laptop (Samsung 7 series) freezing. I then get a pop up saying "windows has stopped working", and it either unfreeze after a few minutes or I need to force close it.

This happened again yesterday, and wouldn't unfreeze so I force turned it off. Upon restarting, I got a BSOD with the message "critical_process_died", and the laptop restarted itself, only to BSOD again. Now when I turn it on it goes straight into disk repair for C:, saying it is scanning for and repairing errors. However, even after running overnight it never progressed beyond 9% on this, and now I cannot exit the loop without force closing the laptop - but when I reboot it goes straight back into disk checking.

A recent AVG scan was clean, and I cannot recall an update that happened yesterday. Unfortunately. Unfortunately I cannot load up the laptop to even check anything. Hopefully this is a software issue and I can get it fixed at a tech store, but I'm worried it could be a hardware problem (Internet suggested there was some memory corruption?).

View 7 Replies

Automatic Sleep Mode And Auto Play Not Working After Upgrade

Jul 31, 2015

I just upgraded windows 8.1 to windows 10, everything works fine, except monitor does not go to standby by after 15 minutes of idle. I checked power settings, change it, back, forward, nothing, same thing.

View 4 Replies

BSOD :: After PC Has Been In Sleep Mode

Nov 21, 2015

Recently, my Windows 10 installation started to give me BSOD's. Never after a fresh boot, but always (some time) after the PC has been in sleep mode.

Please see the attached files......

View 7 Replies

BSOD :: After Standby Or Sleep Mode

Jan 30, 2016

I have a problem with my Asus S56C, I have frequent BSODs, but they only occur after few seconds or few minutes out of the Stand By mode. It does not happen after restarting restarting or turning on the PC. I have already tested the RAM and Hard Drives. Updating to Win 8.1 and then 10 did not change the problem or the way it happens. Since it might be a driver problem, I have tried to play a little bit with Driver Verifier but the drivers are so many that I was not able to identify only one and then I stopped because it was really too time consuming. I updated all thedrivers manually from the Control Panel, but it did not change anything. For the rest the computer is fine, I sent it to the ASUS Service when was still under warranty and they replaced RAM, HD, DVD-ROM, but not the 24 Gb SSD. It also came back with a clean Windows 8 but it had the same problem after installing just Avast, Chrome and Mozilla (I have already uninstalled Avast and no improvements).

View 1 Replies

BSOD :: System Shuts Down When In Sleep Mode

Oct 8, 2015

I upgraded from 8.1 to 10 and had no problems for a while until I began using sleep mode. About every night or two when in sleep mode, my system shuts down. I'm not here when it does so I don't see a blue screen and appear to have no other problems. I used WhoCrashed and get this info every single time I check it.

crash dump file: C:WINDOWSMinidump100815-12343-01.dmp
uptime: 14:28:45
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x9F (0x3, 0xFFFFE001FD59D710, 0xFFFFD001F6446990, 0xFFFFE002062B69E0)
Error: DRIVER_POWER_STATE_FAILURE

Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.his appears to be a typical software driver bug and is not likely to be caused by a hardware problem. The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

I can build computers but I suck at figuring out problems like this. All the drivers are up to date and since this started, Nvidia has had 3 driver updates that I've tried that make no difference.

View 3 Replies

BSOD :: Laptop Shuts Down When Put Into Sleep Mode

Dec 16, 2015

When I close the lid of my laptop, put it into sleep mode, or put it into hibernation mode, the laptop basically shuts down. The power light flashes on and off, but when I reopen the lid or press the power button to turn it back on, the screen flashes grey and reboots.

What I have tried:
Changing all of the advanced power options
Resetting my laptop (to before the issue started occurring)
Restoring my laptop to factory settings
Redownloading windows 10
Disabling the UEFI (BIOS) setting that allows the computer to be turned off to save power
Updating the drivers that were suggested on the windows eight forums
Downloading the chipset driver from Asus
Downloading the ACHI Link Power Management and trying all the settings

What I've done in the command prompt:sfc /scannow then Dism /Online /Cleanup-Image /RestoreHealth.I also tried the chkdsk command but there were no problems found

When I started noticing the problem:After I downloaded VMware's player and created a virtual computer with Ubunt

View 3 Replies

BSOD :: Memory Management When Resuming From Sleep Mode

Nov 14, 2015

Ever since I upgraded to W10 Pro (from W8.1 Pro) my PC has started bluescreening when resuming from Sleep. MEMORY_MANAGEMENT is the most common one, and the only one that has occured so far after upgrade to Build 10586 (upgraded 2015-11-13).

BSODs KMODE_EXCEPTION_NOT_HANDLED (NTFS.sys), SYSTEM_SERVICE_EXCEPTION, KERNEL_SECURITY_CHECK_FAILURE occured before upgrade to Build 10586, and might happen again. Minidumps for these disappeared during upgrade to latest W10 build

BIOS is the latest one. Ran Memtest86+ yesterday, 8 passes with all 11 tests, no errors found. Windows Memory Diagnostics didn't find anything either.

3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041201, The subtype of the bugcheck.
Arg2: fffff6800001e090
Arg3: c7200001eda3c847
Arg4: ffffe000607d0930

[Code] .....

View 9 Replies

BSOD :: Home Build - Crash After Waking Up From Sleep Mode?

Oct 2, 2015

I have recently completed a new home build with the following specs:

Processor: i7-6700k
Motherboard: Gigabyte GA Z170X Gaming GT
Memory: Corsair Vengence LPX DDR4, 2666
GPU: Sapphire Radeon R9 Fury
SSD: Intel 750 Series, 1.2 TB
PSU: Corsair RM Series 750 Watt
Case: Corsair Carbide Series Air 540
OS: Windows 10 Home

The build went fairly well and the computer seems rather stable (and very, very quiet). But the main problem I am having is that after the computer wakes up from sleep mode, it crashes a few seconds later and re-boots. The event log will be riddled with entries upon reboot, but one critical event in particular catches my attention:

Event ID: 41, Kernel-Power

There are also a number of Errors that show up; not sure if they are normal or not but I suspect errors should not typically occur. I've updated all of my device drives but that didn't really seem to solve the issue. I also tried changing the power settings and un-selecting "Fast Startup" as per a recommendation I read on a different forum but that had no effect. To prevent the system crash, I've simply been shutting down my computer after I am done using it which isn't a bad thing, but I'd like to have the option of using sleep mode.

Also, for what it's worth, I remember having a bitch of a time with sleep mode with RAID 0 on my old computer, so perhaps Windows does not yet adequately support "sleep mode" with PCI-E controllers.

DESKTOP-89LL87T-Fri_10_02_2015_172700_76.zip

View 2 Replies

BSOD :: Blue Screen On Returning From Sleep Mode - Toshiba Laptop

Aug 30, 2015

I have a new Toshiba C55-C5241 Laptop, which came pre-loaded with Windows 10. (See Specs)

I clean installed Windows 10 last weekend. All went very well. I just started loading programs this weekend.

I started noticing the blue screen stops yesterday. These happen coming out of Sleep. I probably never would have noticed these before because I was not leaving the machine alone long enough for it to go into Sleep. So unfortunately I do not know when the behavior started - from the beginning or after some software installation.

Here are my reports: SCULLY-Sun_08_30_2015__64736_97.zip

Blue screens are mostly "Kernal Data Inpage Error" and the more serious "Critical Process Died", both I understand to be processor related.

I did not have the presence of mind to test or check any of this early on. But I do have images of the original factory installation and of the fresh, clean install (before any customization or software installs). I do not believe that I ever tried Sleep Mode on the original factory installation.

The stops happen very consistently when on battery power, less so when plugged in. For a while I thought they did not occur when plugged in - this was not the case. They seem to be more consistent when manually going into sleep, not so much when it goes into sleep from Power Settings.

All of the drivers in the clean install were the same as the drivers in the factory installation (at the time I finished). I did not turn off automatic driver update for a few days. I will check the driver list for changes later.

Software installed (in order) : Avast!, Firefox, Office 2010 (H&S), Nitro Reader, VLC (64 bit), Handy Address Book (a prog I've been using for years), Malwarebytes, CCleaner (never run), and Winamp. I am thinking of restoring the clean install image today (start over). Just to see if the behavior started then.

View 9 Replies

Automatic Repair Bad Boot Sequence

Aug 27, 2015

Yesterday my computer started up the automatic repair service when i turned it on. It attempts to diagnose the problem and fails. I've run chkdsk on both the boot and regular partitions of my install drive. I tried to repair using an install disk but it says it cant because my install drive is locked. I also tried resetting from within the recovery environment. When I did it got to 8% and then said it couldn't reset the os as it encounter a problem during the reset. I'm running Windows 10 off an SSD.

View 3 Replies

How To Get Upgrade Out Of A Repair Loop

Jul 29, 2015

Although, the upgrade this morning initially was successful - it did reboot into Windows 10. When I restarted the machine, it's now stuck in the setup repair loop. None of the options seem to work, even if I try and have it reinstall windows while keeping my files, it still restarts and goes back to the setup repair. I really don't want to do a clean install as I didn't make a backup of my files (which I will always do from now on).

View 1 Replies

Automatic Repair Error Every Time On Boot Up

Oct 1, 2015

Every time I boot up my computer it does a repair on my computer then shows a error. The error says "automatic repair couldn't repaiclr your pc. Log file:EWindowsLogFilessrtSrtTrail.txt. I have windows 10

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved