Randomly when browsing the internet I'll get bluescreen's 10-20 minutes in. I haven't tested many things but I have updated a couple of drivers in spite of what I thought may have worked..
View 1 Replies
I installed Win 10 on my home server and it keeps crashing all the time with random BSODs (with a bunch of different error messages). Before that, it was running fine on Win Home Server 2011.
I tried a bunch of driver combinations (the default ones, the ones from ATI, the ones from Asrock, ...). Unfortunately, nothing solved the issue. Memtest is OK.
The hardware is an old-ish ASRock A780GXH/128M motherboard with a Phenom CPU.
I have a fresh install of Windows 10 Home on a factory built PC (Chillblast) that was running OK under Windows 7, but is now Blue Screening on Windows 10.When I boot the PC from cold about 1/3 of the time it will blue screen. The messages vary. Sometimes it will say IRQL Not less or Equal, or Page fault in non-paged area, or Memory Management.
The messages always happen pretty much at the exact second that you would normally get the logon box up. It never Blue screens when I'm actually using the computer, even if I'm hitting it hard with games. It also never blue screens on a reboot. Only when it's booting from power complete power down.I suspect that it's software rather than hardware, maybe a driver?
The only message in the logs is that the computer as recovered from an unexpected shutdown. It rarely creates Dump rile.I thought that it might be bad RAM. I have two 8GB chips. Both are the original chips that the computer was sold with. If I try with one chip in it runs perfectly. It doesn't matter which chip, or which slot the chip is in. It runs perfectly with all combinations. If I put them both in 1/3 of the time BSOD.
I've run Memtest86+ and it didn't find any problems. I've also run the System File Checker and it didn't find anything.As this is a fresh install I don't have much loaded. It started blue screening with only the basic software needed to run my hardware, and an Anti-Virus (Avira) loaded.
Windows 10 is installed on a totally new disc, straight out of the box (Sandisk SSD).Other than the hard disk and a soundcard, the PC is pretty much a factory build, with a factory configured motherboard. It's not overclocked, and I haven't tinkered with it.Before I installed Windows 10, I occasionally had a Stop 0X000008a error, but I don't know if that's relevant or not as it was a different OS on a different hard disk.
I am running Windows 10 on a desktop computer about a year old. Custom built by Hard Drives Northwest. Dual boots Windows 10 and 8.1. Windows 10 is the default, which replaced Windows 7 that dual booted with Windows 8.1. Windows 10 seemed to run quite well at first. Recently, maybe for a week or so, I have found my mouse slowing to a stop, restarting for a while, stopping again and repeating this cycle for a while, then the BSOD with various messages including :
DPC_WATCHING_VIOLATION ; CRITICAL_STRUCTURE_CORRUPTION and FAULTY_HARDWARE_CORRUPTED_PAGE
Those are the messages I catch. Often the computer just restarts when I am not around so I don't know the error message. I am writing this is safe mode as the computer is nearly unusable in normal mode. Windows 10 is fully updated, I have checked drivers for graphics card, mouse and monitor and all are up to date. Attached is my data log ZIP file.
My Win 10 Mail has stopped receiving messages it sends them to the server (Bigpond) but nothing has come through in the last 10 hours and at least 30 mails are on the server.
View 1 RepliesLately I have been getting hard lock ups on my desktop. I had no real software or hardware changes but I did notice the crashing was only happening during GTA 5. The locks up would never have an actual BSOD or error message just a hard freeze requiring me to restart or the system would restart itself.
Now it started happening even without running GTA 5. My cpu temps were a bit high (98 was the max) with GTA 5 so I thought that was the issue, but when idling + my hyper 212 evo, I get 30 deg temps and still crashed.
Interestingly I also crashed when using the dmp application to make the mini dump I uploaded to analyze.
I have a Sony VAIO laptop, model SVE14A290X, which had Windows 8.1 installed on it. I waited until late December 2015 to upgrade to Windows 10, and followed all of the instructions and driver downloads given on the Sony website.But since then I've been having regular freezes and BSODs, once or twice a day, sometimes more, with varying error messages. I took my computer to the local Microsoft store and they said I needed to do a clean install, which they said would solve my problems. So they did that for me, but since then I've been having the same problems, with the same kinds of error messages. I have followed your instructions and attached the zip file.
View 9 RepliesI keep getting blue screens randomly with different messages, including KERNEL_INPAGE_ERROR, CRITICAL_PROCESS_DIED, and more. It doesn't seem to be associated with any particular app or thing that I do. This morning, I woke up to find that is BSODed in the middle of the night for apparently no reason.
I have tried SFC /SCANNOW (corrupt files can't be fixed), DISM restore_health, reinstalling Windows, check disk... You name it.
Here are minidumps of the past several bluescreens, and a full memory dump of the most recent one. I've been getting these for various reasons - I already fixed a few problems with programs chewing up hard disk and causing crashes due to this, but I recently started getting them again at random times and I can't figure out the root cause. Attached is the official folder of stuff from the tool. The event log will include additional unexpected power losses because occasionally it completely freezes and I have to hard reset. I'm hoping it's not hard-drive failure because it often fails for different reasons.
View 9 Repliesit has given me several reasons for BSOD, such as: unexpected kernel mode trap security check failure and others...
I am running in safe mode now without problem for quite a while so I guess it is a driver problem, I hope?
here is my debug thing
I recently bought a HP Probook and within days I started getting BSOD - I had it replaced by HP and the same model replacement is now also giving BSOD. I deliberately didn't install anything on it apart from Chrome. I'm getting BSOD all the time now when browsing - it doesn't matter which browser I use. I have the minidump files but don't know how to read them. I've uploaded them...
View 2 RepliesWhile playing a game on my computer I get BSOD IRQL_NOT_LESS_OR_EQUAL, it happens EVERYTIME I go onto the game and try play it..
View 1 RepliesI have installed a clean windows 10 installation, and i keep having these different BSOD every time my computer is making a cold start = i shut the pc down in the evening and in the morning BSOD starts the day.. the computer restarts, and it works all day long, resetting and turn off and quick turn on again no BSOD.
I have attached my .zip file
So now after continuously getting about 8-9 BSOD's back to back while connecting my phone as usb modem , it has started to bother me too much
It occurs only after i connect my 3g phone as an internet modem.
I have included the dump files using dm_log_collector
ABHAY-07-12-2015_203503_72.zip
I have updated the files for the BSOD logs. It is a Kernal_Security_Check_Failure about 99% of the time. Sometimes they will happen when I launch a game, when I start playing music, or even when I am away from the computer without anything running. I am unaware of any connection to them. They happen between 5-10 times a day, and it is VERY annoying.... (updated again[and again][and again])
View 9 RepliesEvery since I upgraded to windows 10 and boot my desktop machine I get a BSOD with Bad Pool header. It keeps looping and rebooting with the same error. The only way around it is to go into the bios and save changes and then it allows me to log in. I have disabled fast reboot and still no joy. Attached is a log file with all the relevant info
View 3 RepliesMy Win10 laptop flips out on boot with a blue screen, right before/after you can see the mouse. It never reboots when it says it will. And it seems to blame my graphics card for this, as Catylitst Controll on logging claims that there is no AMD driver or thats its malfunctioning. I have to reinstall it to get my computer working better than a snail's pace, and for Catylist Controll to reconise it.Will get a dump of the error, just gotta restart a few times, as i accidently deleted the error dump and used disk cleaner.
Edit: Error is: , And the dump: W10LAPTOP-Sun_02_07_2016_134851_47.zip
It has been doing this EVERY time I restart or start up my computer. It is very annoying as it clears some of my apps. It also says it is putting me on a temporary account or something like that.
View 1 RepliesThe computer seems very stable right up until I let it go idle. After 4 minutes I get the REGISTRY_ERROR bsod. The system is not over clocked. CPU temps are low. Memtest86(+) runs fine for 8 passes with 0 errors. Disabling the two .NET tasks that start on idle in Task Scheduler made no difference (as per the post with a similar issue). CHKDSK /R requires a reboot and no messages are present on the screen while running but there is no log file generated in Event Viewer / logfiles / application. I ran sfc /scannow and got errors. A reboot and retry did not correct the error. I ran Dism /Online /Cleanup-Image /RestoreHealth and it successfully repaired the system. Subsequent scans with SCF indicate no issues or problems. Not sure if it is relevant but the system has a Samsung 950 SSD as the C drive.
View 9 RepliesSince updating (free, via download) from Win 7 to Win 10 I have had a few problems. I have 3 internal HD: (1) System drive (SSD, 500GB), (2), Media Drive (Seagate 3TB), (3) Documents Drive (500 GB). I also have a USB backup drive that the computer can see.
Seemingly at random, but more usually the Media Drive, doesn't appear when I boot the computer. If I boot the computer and go to BIOS all of the drives appear. Currently the computer in "this PC" recognizes 1 and 3.
Additionally it takes around 5-10 minutes to boot, sometimes hangs and has to be hard reset.
I have had a few BSOD as well, at seemingly odd times. The computer will run with the drives it sees fairly well and eventually BSOD. I should note that sometimes the BSOD is not the one I'm used to from previous Windows installs - it's really just blue with no info.
I have physically reordered the SATA cables (changed the drives to different cables) and this works for a time but eventually the problem persists.
Finally, I thought about doing a clean system install, but was wondering how you do that if you upgraded via free download (i.e. I don't have a disk - there must be an easy solution for that I am sure).
JACKSSDMEDIA-Thu_12_10_2015__80206_24.zip
After maybe 10 minutes, I get a complete freeze and I need to restart my computer. After many attempts of restarting, it usually works fine if it doesn't freeze in the first half an hour. I attached the log.
View 9 RepliesI just got Windows 10 today and when I did my own stuff, I get Bad Pool Header error messages. It has happened every time when plugging in game controller or accessing internet.
Is my computer not compatible with Windows 10? Or is it something else?
After after upgrading my laptop to windows 10 , I found a small blank white window at left side when it woke up from sleep.It last till restart.
View 1 RepliesEach time I click on the tile for the start menu a message comes up saying critical error and will try to restart going through the same process over and over. I am able to get online using my security password program but cannot use any menu options and cannot get into setting to restore .
View 1 RepliesYesterday I installed Windows 10 Professional on my Acer Aspire V5-573G laptop. I installed the English (US) version even though I live in the Netherlands. When I corrected the time I have set it to the correct timezone (see screenshot) but it has the wrong time connected to it. As seen on the screenshot the time displayed is 21:49 even though when I took it, it was actually 13:49. Off course I could manually change the time, but I was wondering if maybe this is part of some bigger problem and if there is a better way to fix it.
View 5 RepliesMy new build is restarting randomly, and unlike with windows 7, there are no messages telling me what happened. What's the best way to view system logs that might have information about crashes?
View 1 Replies
