Black Screen After Update When Restarted
Dec 23, 2015
I was using my laptop last night and got off and decided to go to bed. At this point it was still working fine. When I woke up, it was installing an update and I decided to let it finish. After the update was complete, it went to a lack screen, which I thought was weird.
So I restarted and it went to the boot screen, which leads me to the problem I've been having since. It would show Lenovo and the boot screen until it would blink to black a few times before showing me the boot screen for some more time at a lower frame rate until the screen would appear black. I can still use everything and even log in and hear the skype startup sound. Everything works fine. Is there an easy fix to this or should I wait until the next Windows update?
I have lots of progress on the computer that I cannot lose. I do not know much about the inside of a Lenovo ideapad z510 so I could not take out the battery. I am desperate and have tried anything and everything online. Something has to work.
View 2 Replies
Similar Messages:
Dec 1, 2015
So I have a bit of a problem where my screen flashes, I instantly thought it was display drivers so I uninstalled them only to worsen the problem, the computer restarted with a black screen which later turned into a desktop screen with no icons and a flashing screen (can't click anything or even load up the start menu with the windows key). I put it into safe mode but it does the same thing. Nothing works except task manager and i can't run task from it or it will exit out, system restore doesn't fix the issue either. Computer is a lenovo k450 i5-4440 8gb ram 1tb hdd with an evga gtx 760.
View 1 Replies
Dec 1, 2015
This weekend I had several BSODs while playing games. 2 times the system simply crashed black screen and restarted, 1 time I received a BSOD MEMORY_MANAGEMENT error, and 2 times I received a BSOD IRQL_NOT_LESS_THAN error and a restart.
The MEMORY_MANAGEMENT and one black screen crash occurred while playing Forged Alliance Supreme Commander, then the IRQL errors and a black screen crash occurred while playing Steam version of Age of Empires II.
DM Log Collector file is attached.....
View 9 Replies
Aug 1, 2015
I was updating with mediacreation tool, and it stuck at %93 black screen There is not cursor, says it is configuring settings %75 .....
View 3 Replies
Dec 6, 2015
So basically, I've been dealing with this issue ever since I've upgraded to windows 10 months ago. I've done disk checks sata port checks almost everything under the sun
Months ago, anytime my computer was shut down for more than an hour or 2 I would encounter an interesting unique problem. After booting and loading the bios screen, the next screen would be black and would hang there and I would have to hard reset and try again. I would keep having to hard reset until it would boot into the Windows Boot Manager and from there I would hit the Reset button or go to the advanced settings, and hit continue to windows 10 and it would from there boot into windows successfully. AHA! now you must be thinking "Simple work around! Simply boot into the Windows Boot Manager every time you shut down your computer and easily but annoyingly bootleg boot into windows 10 everytime using the Boot Manager options" and I thought the same. Unfortunately unless I let my computer get to the boot manager by hard resets at that black screen I cant get windows 10 to boot.
I've reinstalled windows 10 again for the 2nd time on a new ssd in hopes that it was a drive issue but that does not seem to be the case, This is my second install of windows 10 on this ssd. This time I've installed windows HOME instead of Pro.
Do I've wasted a write cycle on this new Samsung 850 evo? I just received it in the mail and would rather not waste its lifespan on trouble shooting
View 3 Replies
Aug 4, 2015
I reserved my copy of windows 10. I have tried to update it plenty of time but every time i do it fails during the second boot, it stops at 93% and goes to a black screen for a while, than it says "restoring back to your previous version of windows" I dont know what to do. I tried mostly everything. I deleted all the files in the software distribution and went into command prompt and put in wuauclt.exe /updatenow that didnt work. I downloaded the windows tool directly from windows that didnt work.
View 7 Replies
Dec 6, 2015
So basically, I've been dealing with this issue ever since I've upgraded to windows 10 months ago. I've done disk checks sata port checks almost everything under the sun and still have not found a solution to my problem.
Months ago, anytime my computer was shut down for more than an hour or 2 I would encounter an interesting unique problem. After booting and loading the bios screen, the next screen would be black and would hang there and I would have to hard reset and try again. I would keep having to hard reset until it would boot into the Windows Boot Manager and from there I would hit the Reset button or go to the advanced settings, and hit continue to windows 10 and it would from there boot into windows successfully.
Now you must be thinking "Simple work around! Simply boot into the Windows Boot Manager every time you shut down your computer and easily but annoyingly bootleg boot into windows 10 everytime using the Boot Manager options" and I thought the same. Unfortunately unless I let my computer get to the boot manager by hard resets at that black screen I cant get windows 10 to boot.
I've reinstalled windows 10 again for the 2nd time on a new ssd in hopes that it was a drive issue but that does not seem to be the case, This is my second install of windows 10 on this ssd. This time I've installed windows HOME instead of Pro.
I do NOT boot into a black screen with a cursor
There is now something I'm going to call "The Event" After a fresh install my windows 10 will freeze however i can move my mouse but no keyboard commands work and I from this point have to force reset my computer, AFTER i FORCE RESET when my computer is shut down for a couple of hours i encounter the boot problem. so this "EVENT" has something to do with whats causing this issue.
The Event was different when windows 10 was installed on my 1TB HDD, everything would lock up rather then being able to use my mouse and it would force reset on its own.
View 1 Replies
Jul 29, 2015
I was installing windows 10 (8.1 before) on my Dell inspiron 15 7000 series (7537), and it progressed to restarting after the installing drivers step, but after the restart and going through the dell startup screen, everything went black. The HDD light is stuck on and not flickering like it normally does.
There is no cursor or anything on the screen, it's just black. I waited for an hour and nothing changed, so I thought maybe it was frozen, so I restarted the computer via hard reset, which took it to a "attempting to recover update" screen, but after a few seconds on that screen it went immediately back to the black screen.
Its been about 30 min since that hard restart and its still black, HDD light still on, and nothing seems to be happening.
View 9 Replies
Oct 26, 2015
So I recently gave my laptop an update today. It was fine before but...now it boots to a black screen with just a mouse pointer visible. What should i do?
View 1 Replies
Aug 27, 2015
I upgraded from windows ultimate to windows 10. my computer boots through everything and finally brings up my old windows 7 desktop screen and then everything goes black, but mouse shows up on black screen. Is this a driver problem with windows 10? However, before the black screen appears the new start button and screen appears as the windows 10
View 1 Replies
Jan 12, 2016
I'm having a problem with Windows 10 Pro x64. The notifications that pop up by the system tray won't disappear. They stay in the foreground until I force a restart of Explorer via task manager. It would ordinarily just be an annoyance but the notification often blocks (stays in the foreground) the right click menus of the systray icons which disrupts usage. As you know killing/restarting Explorer also stops any file copies/transfer in progress which is another PITA.
At first I thought it was an issue because it was an upgrade from W8. I did a fresh install of the latest build to a new SSD over the weekend and the issue persists. I have two W10 Pro x64 systems and it only happens on my laptop which is a Thinkpad Edge e531. Both machines run identical software. The only difference is Intel Display Driver systray icon on the laptop. I cannot completely rule out the Intel app but it's such a widely installed application you would think if that is the cause there would be a lot feedback online.
View 3 Replies
Feb 2, 2016
I have been using my sweet gaming PC (Windows 10) since September when Microcenter, who assisted me in fixing a problem with my motherboard, returned my computer to me. I have never had any problems with software until yesterday when I was browsing around and suddenly my computer restarted. It said it was updating, so I thought nothing of it, then it booted back up, and I needed a password, I didn't know what it meant, so I just typed random characters, it told me a hint that I would never set as a password ...
View 1 Replies
Jul 2, 2015
I do really need to fix my computer. I was installing windows 10 on my computer then the power got cut and now I just get the following message when my computer boots up: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click ok to restart the computer, and then restart the installation.
I have tried to restart the computer alot of times but I get the same message everytime I start my computer.
View 1 Replies
Jan 18, 2016
I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
View 2 Replies
Oct 10, 2015
I have a Lenovo Thinkpad Edge with an Intel I5 processor, 64 bit with no hardware upgrades (stock). I had accidentally stepped on the screen (fell off my lap and then crunch) which was mangled beyond repair, so I have been using it similar to a tower, with a VGA and/or HDMI connected monitor (my HDMI cable went bad, I picked up a new cable but hadn't hooked it up to the second monitor. I started my free upgrade from Windows 7 Home Premium to 10 last night. I woke up to the black screen/mouse pointer issue which is what brought me to this thread. I tried the recommended fix:
1. Hit ctrl, type in password and enter
2. Win Key + P + Down Arrow. (Win Key + P only seems to do the same thing)
This brought up options to
1. Disconnect projector (Tried this and lost connection to the VGA even after reboot)
2. Duplicate (Screen is still black with mouse cursor, but I saw a little bit of red and blue pixels at the bottom where the task bar should be until I disconnected and re-connected the VGA, then it was back to black screen and cursor)
3. Extend (still black screen and cursor)
4. Connect Projector (still black screen and cursor)
I'm not sure what to do. I must have some OS installed, because I am able to also perform these operations from my USB Keyboard/Mouse. I'm just not sure how to get Windows back on my VGA connection (I haven't tried HDMI because I did not have it connected when I ran the update.) I thought Duplicate displays would do the trick, but apparently not. For as beat up as the laptop is on the outside, the hardware performs fine. I also have a 2nd laptop (work laptop, also a Lenovo W541) that I can use if any solution involves downloading something bootable.
View 1 Replies
Jan 13, 2016
When I boot up my computer (to windows 10). It will do the Asus splash screen then instead of going straight to windows if does this black screen with the kinda terminal thing (with no writing/text) then goes on to windows. Does this affect my computer?
View 1 Replies
Aug 13, 2015
So, I wanted to reset my pc via windows 10 and everything was ok untill the resetting got stuck on 99% and I restarted my pc.
Now when i start my pc I cant press f8 and get into advanced boot options and when windows starts up It says INACCESSIBLE_BOOT_DEVICE. Your PC ran into a problem and needs to restart. and then windows keeps restarting my pc for no reason.
I do not have a windows CD. I can only get into my ASROCK Bios
View 1 Replies
Jan 2, 2016
win10 after showing logo black screen take 2 to 3 mintus to show welcome screen. amd radeon dual graphic card 7400+6310 driver amd site shows it a latest updated driver ...
View 2 Replies
Jul 31, 2015
Okay so I updated from windows 7 to windows 10 i have these black bars around my screen instead of a full screen so I tried changing the resolution because it was set to 800x600 so I change it to 1920x1080.
View 1 Replies
Jan 14, 2016
I did a Windows Update 3-4 days ago ever since my desktop background goes black at random. It also goes black if I click a desktop icon or if I use the highlight tool on my mouse. When I was doing the update it got stuck on restarting and I had to force shutdown my computer. I was thinking about using system restore.
View 1 Replies
Aug 1, 2015
The black screen occurs before login screen. It happens randomly. I have to move the mouse (haven't tried pressing keyboard) and it will show the login screen and windows will continue normally. On my device driver it shows only 1 display adapter that is NVIDIA GTX 970. My motherboard is H87-PLUS and its specs shows that it does have an Integrated Graphics Processor.
Tried installing Intel Graphics Driver but just shows 'This computer does not meet the minimum requirements for installing this software.' Tried disabling the lock screen too but its not working. Tried putting PCI-E as the default graphics in BIOS but its not working either. how could I prevent the black screen from showing up again?
View 4 Replies
Mar 5, 2016
After log on I get black screen,I can get into task manager.Is there a way to restart computer in safe mode from task manager new task?
View 1 Replies
Sep 28, 2015
the last two times I have been getting a black screen it says to close other programs but I cant do it?
View 3 Replies
Mar 5, 2016
I don't know what to do. I've tried everything. I am literally about to break down crying. I've been at this for six and a half hours now. I've completely run out of space on my 320GB hard drive, and I've been trying to clone to my new 1TB since I got home from work.
I've currently got windows 10 on a small HDD that I need to transfer to my newer, bigger drive. I do have multiple hard drive slots, as I need the OS on the big one. Don't ask why, it's complicated. Point is, I can't use the little one anymore and I need the OS as well as my files on the big guy.
I've tried 2 different cloning programs, each one taking ages to finish copying. The problem is, everywhere I go says the reason I have blackscreen when I try to boot is because I'm missing the 100MB hidden boot partition. But it's sitting right there.
I've tried booting with only the new HDD installed, tried 100 boot and BIOS settings, different slots, completely formatting the new HDD and starting over from scratch with the same program and a different one.
I've even tried booting from a recovery disk. That won't work either, and gives me the same black screen with a single horizontal bar blinking in the top left corner.
View 5 Replies
Sep 6, 2015
When I boot my pc sometimes I get a black screen. But by pressing ctr alt & delete I can log out, and then login and its then OK. I have reset my pc but its still the same.
View 4 Replies
Jul 30, 2015
If you have an on board Intel graphics controller as well as an add on graphics card, windows thinks you have one more monitor connected than you actually have. so when windows loads its outputting the video signal to a bogus monitor.firstly wait long enough so the mouse cursor to appear when you move the mouse.(blank screen with a white mouse cursor).Then press the space-bar and enter your login password or pin (yes your doing this blind)
You should now be logged into windows.if the desktop dose not appear after 30 seconds then press WindowsKey-P down arrow twice and enter.
View 9 Replies
