Drivers/Hardware :: No Audio Output Devices Are Installed
Aug 11, 2015
I've upgraded my ASUS U36SG from Windows 8.1 Professional to Windows 10 Enterprise. Everything went fine unless the issue "no audio output devices are installed",
I've tried almost all the solutions for that problem in other similar threads without any success.
Consider that now, in my Device Manager I can see this (OS is in italian):
Both Microsoft and Realtek HD Audio Driver up to date to their last version.
But, no audio (or microphone) device:
I also write to ASUS and they first suggested me to install a legacy version of the Realtek Audio Driver (v 6..0.1.7503) then to rollback to Windows 7 Pro (I'm not joking...)
Just bought a new HP Pavilion x2 (laptop/tablet hybrid) and it has been working perfectly for about a week. Suddenly went to start it up and it had done some updates which has left me with no audio. When I open up the Sound through search, under the Playback tab there is only "No Audio Devices are Installed" (with both Show Disabled and Disconnected Devices ticked).
I have gone through device manager and under Sound, Video and game controllers there is only: "Conexant I2S Audio Codec" as a driver. I have uninstalled this, reinstalled it, updated driver software (from my computer and internet), disabled it, added legacy hardware and tried a varied combination of these from various forums and guides and nothing has worked. There is still a little red x next to my volume control. My speakers are B&O (says so on the side of the screen).
So, i have Windows 10, i'm barley learning about Computer's and such, but i plugged in my headphones and then all of a sudden i see "No Audio Output Device is Installed." I unplugged my headphones to see if that would fix the problem but of course it didn't. I don't know what to do i tried doing something else where i had to change my files to classic but i didn't see any General tab.
I have upgraded my laptop Asus k43s from windows 7 to windows 10. Everything went fine but then I decided to reset the laptop to have a fresh start. After resetting, my sound button has a red x mark on it saying that "No audio output device is installed". So I go to the device manager to check things out and it says that the drivers are functioning well. I have 4 Nvidia high definition audio and 1 realtek high definition audio(don't know why so many). I tried to disable and enable but no luck. I also tried to do a reset again to check if something went wrong on my first reset but still after the 2nd reset I still get the same problem.
I recently reset my windows 10 then I got problem my laptop can't produce sound so I can't hear sound from it the speaker logo in the task bar have x mark and when clicked it opens troubleshooter then windows can't find the trouble. I also uninstall and reinstall my audio driver, Realtek High Definition Audio and NVIDIA High Definition Audio, but nothing change this is frustrated me I need sound to play games, watching films, and watching youtube, so anyway I need sound to make my life harmony. One thing the screenshot (Windows+Prt Sc) also won't save the picture only dimming few second then I couldn't find the pictures.
so before I wiped my entire PC the sound was working flawlessly - I would use the audio inputs for the Razer Blackwidow Chroma and it would work perfectly.Since the reset however, no sound has been discoverable, I get a red x on my speaker, and it says "No audio drivers installed" on "Playback Devices" I have tried putting my headphones in every audio jack on my PC (front, back and keyboard) and it still isn't picking my headphones up, I have installed the latest drivers and still no joy.
i have my ASUS X555LD for almost a year now, so as far as date is concerned my laptop shouldn't be too old to suffer such illness. So it came with Win8.1 x64 of course and just recently, as soon as Windows 10 was released, i upgraded quickly.
but right after i upgraded to Windows 10, my laptop became ill and had this errors:
1. i got BSoD Most of the Time, one would say CRITICAL_PROCESS_DIED or UNEXPECTED_STORE_EXCEPTION. there are times my laptop would freeze in the BSoD, not even the 0% would move to 100%. so i had no other choice but to force shutdown it, and sometimes after turning my laptop on again i end up at my BIOS with no HDD nor BOOT ENTRY listed. as i experimented, i had to press slightly hard on the right side of my Laptop where my HDD is Located just for my Laptop to re-read my HDD once again, as soon as i got back to Windows 10, i ran an HDD Check and nothing was wrong, no bad sectors or anything. this is confusing me as to how it is happening. so i somehow got used to BSoD since my Laptop frequently experience it. sometimes just a simple movement that would shake my laptop would turn into BSoD again, i suspect something like my HDD or loose or the likes. i dont really know.
2. after the BSoD Case, a week or three i guess. i started to loose Audio Ability. it was just this morning, the Volume Icon has a "RED X" on its icon and states "No Audio Output Device is installed.". and after checking my Device Manager, to my surprise the Built-in Audio Device (Realtek) is not there. i don't know how or why it happened but i can't get it back.
even checking the sound tab on the control panel doesn't bring out Audio Devices.
i was wondering if ASUS or the PC Store where i bought my Laptop would fix it for me as per warranty is involved ?
I just bought a new Asus F555LA-AB31 with Windows 10 from amazon and after about a couple days, the speaker icon in the system tray has a little red X near it. And when hovered over it, it says no audio output is installed. I've tried a multitude of fixes, including reinstalling audio driver, using system restore and restarting Windows audio from services.msc, and none of them work.
My PC Specs: Intel core i3 5010u 4gb ram Realtek hd audio Windows 10
Laptop Samsung NP300V5A. Sound stops working about a month after Win 10 upgrade. No changes done at the time.Audio devices show up under Device Manager, but not under Playback/Recording Devices. Same for Realtek Sound Manager - it doesn't see the devices. I can install, delete and update drivers under Device manager but it doesn't make any difference. It is not a physical problem, tested on Linux live CD.
Solutions tried: -Installing various versions of HD Realtek Drivers (including windows update version) -Installing/Removing Realtek software. -Enabling/Disabling devices under Device Manager -Called spirits of ancestors. Seemed like it worked for a while, but ended up being a joke. -Did system restore to various dates. -Restarted in safe mode -Restarted various services such as Windows Audio, Windows Audio Endpoint Builder, Plug'n'Pray, Power, etc. -Checked system, application and driver even logs. -Tried a couple of registry fixes. Angered spirits of ancestors. Turning gray.. -Reinstalled chipset drivers -Rebooted about 30 times -Sound Device Troubleshooting finds no issues -Display Disabled Devices is enabled
I noticed the sound was off on my task bar (just installed Windows 10), anyway when I went to the control panel it said there was no audio device installed. So how do I go about installing it? I googled but all the advice was for older editions of Windows
Without using the stereo mix method, how could i make all applications play sounds on all my output devices. I want to do it this way, so if i want an application to play on just a single output(ex. headphones) i could just mute that application on all other output(ex. speaker, stereo, HDMI) on windows' volume mixer.
or if there is a software for this, i looking for designs as plain and simple as the default mixer and easily accessible. i don't want it too complicated.
Windows 10 should find new drivers through the update mechanism, which doesnt work always though. And if you go into device manager and click on a device and do a look for new drivers, it always finds new ones with a high chance. But it' just stupid to click all 100 devices single through. Isnt there a smart way to do this? Why isnt there an option for search and download all devices drivers.
It used to be possible to do this in Device Manager IIRC, but with Windows 10 installed I can't see how to get a device driver report. Has this been taken away? If so what will produce such a report?
I've been using Win10 since the general release. This was an update install on a Win7 laptop.Apart from a few issues (waking from sleep on scheduled tasks, lack of control on updates) I have a problem with external devices.
If I use several USB flash drives/harddrive I'm able to eject one or two but then I can't eject any others. When this happens I don't get the menu option to eject/safely remove the device through "explorer" and the drive doesn't appear in the "safely remove" icon on the task bar. I can still access the drive without issue just don't have any way to eject except to shutdown the laptop. If I reboot the laptop but leave the device attached the eject option reappears.
The laptop is fully patched and I can't work out what is happening and google hasn't revealed any similar problems except the normal "device is in use" message.
Since my PC was updated to Windows 10 I have been having trouble with USB devices not working. It appears the drivers do not load or do not work. Example is my Saitek rudder pedals. They appear to be fully installed and appear in the device list but they do not work. I go into the device manager and update the driver to the exact same driver and it works. I plug in my iPhone and it is recognized as an iPhone but appears in the Other Devices with a yellow exclamation. A check and it says there are no drivers. Manually find the drivers and update them and it is good until I pull it out. Next time I plug it in same thing. Phantom 3 pro wont show the disk drive and have to load in a generic disk drive driver and all good. This list goes on.
My external hard disks , and one MP3 player (all USB devices) are no longer recognized, nor appear on "This PC", after I upgraded my Windows 8.1 to Windows 10 OS. Other devices, such as my Android phone USB connection still works well. I made sure that the "Automatic download of driver software for devices" is turned on in the Device Installation Setup.
I purchased this laptop some months ago using Windows 8.1. I had so many problems and hated the OS so much I upgraded to Windows 10. I have found that some devices I plug in via USB work just fine but some do not. It seems that the more sophisticated devices do not work.
I have a few HDDs from old laptops that I have put into caddies - these work fine connected by USB. However the following do not work at all when connected by USB.
They all light up indicating that they are charging however there is no drive registered in This PC, nothing appears in Devices and Printers, nothing that I can find anywhere that indicates that the PC detects a thing. There are no error messages or notifications. This is true for all the USB ports.
I've tried a few things over the last few weeks for each device as I've learned that another doesn't connect but I think it might be best to start from scratch and assume nothing about how far I have got. I'm finding ways round connecting the Galaxy and there's nothing too pressing right now on the HDDs that I need to access.
When starting up my laptop this morning, my wireless mouse didn't work. I replaced the battery, still didn't work. Tried on another computer, the mouse did work. I went to look in device manager, the mouse wasn't detected by the laptop. I tried to connect my external harddrive, it got power but also wasn't detected by my laptop. Everything worked fine yesterday.
Just like the title says, I don't want the realtek audio drivers as it completely messes with my audio and also doesn't correctly switch when i plug in headphones for example.
It also doesn't allow for the 'speaker fill' enhancement to be used when playing stereo content through surround sound.
Windows itself does a far better job as opposed to realtek.
Every time i uninstall realtek it automatically gets reinstalled.
I have once again run into a problem with W10, and it's getting very frustrating with all these errors and malfunctions that W10 has. The problem is that when I plug a USB-device in my computer, no sound is being played to signal that the USB-device has been recognized, and that really seems to be the case. I can't even use my mouse.
I believe the problem started after the latest update for Windows 10 which took place about one day ago. Otherwise what could cause this kind of error.
I have been also wondering if it is possible to downgrade my laptop back to Windows 8. Windows 10 is clearly a very unstable OS released in a hurry and I have encountered the most bizarre problems with it, including Sony Vegas Pro 13 not launching any more.
My Taskbar no longer has the devices icon, the one which allows you to 'safely remove a device' such as a USB drive. What happened to it. I hoped re-booting might bring it back but it has not. How do I recover it?
When I go to Control Panel > Devices & Printers, it takes a good 20 seconds for the progress bar to move across the window and the Devices & Printers window to open.
