I am having a problem with file explorer constantly crashing. If I click on the icon in the toolbar, file explorer will open, it will say "working on it," but then it crashes, the screen flashes, and it goes back to the desktop.
If I try to open a folder on the desktop, it does the same thing.
I have done numerous google searches in trying to fix this.One that I did find talked about using the Windows debugging tool, but it was so complicated I couldn't figure out what they were saying.
I have deleted and uninstalled multiple programs that I no longer use, hoping that one of them was what was causing the conflict. I also unchecked a few things in startup as well.
I can't even browse my computer's desktop or hard drives. I have to go to the command prompt to do anything. I grew up on DOS so I can navigate around.
After upgrading from Windows 8.1 to Windows 10, my file explorer simply keeps crashing when navigating in folders.
Example: I go to "This PC" and the window that pops up show all my drives but not how much storage they have/have left. When I try open a drive or folder the window and taskbar closes down and reopen after a few seconds. I haven't had this problem even a single time before I upgraded to Windows 10 but now it happens almost every time I try open a folder.
So I have had Windows 10 for a couple of months now, and have never had any issues up until now. Whenever I try to rename a folder/ add new folder file explorer freezes as soon as i touch the keyboard.
I've scoured the internet for solutions but have had no success it's getting extremely frustrating as I can't keep having New Folder...New Folder 1...New Folder 2 etc.
I've been looking into my keyboard and if the drivers are all working correctly. I have a Razer DeathStalker Ultimate. all drivers are up to date with Razer Synapse.
My computer is crashing every time I turn on my computer. It crashes after around 15 minute. After it crashes once, it crashes right away right before or after the welcome screen. Before it crashes, my screen fuzzes, sometimes it doesn't. I tried a lot of things by deleting my graphics driver completely using ddu program or something like that and reinstall only the display driver.
Since I upgraded from Win 8 to 10, I find that I need to restart my laptop several times a day or else it begins to blank out and flicker and then crash altogether. I recently installed CCcleaner (the free version) to clean the cache and that seemed to work but the problem still comes back, plus all my saved passwords get deleted. I have an HP Envy dv7 with 8 GB of RAM. This PC runs pretty well most of the time but when it begins to slow down and flicker, etc., then the problem starts. I do notice that this happens most often after I have been on the web for a period of time.
I just started using my custom built pc started on December 26th 2015 (built in 2015 summer) because I finally got my monitor. After downloading my drivers for my video card (gigabyte amd r9 280x), everything worked fine. After downloading some games from steam, I played games from steam for like 2 days until my computer started to crash constantly when I turn on my computer (it does not crash when the computer starts but it crashes few minute later after I get into my computer). It crashes at random times, when I open files, device manager, browsers, games and even when I don't do anything on it. When I get really lucky, I could actually play games for a while but it always ends up with a crash.
Sometimes it's a BSOD but 80% of the times its vertical stripes, sometimes blue, black and white, and other different colours. Today it crashed over 10 times... and I gave up with my computer until I found out about this website.
I used whocrashed program to find out why it was crashing.
On Mon 1/4/2016 5:08:21 AM GMT your computer crashed crash dump file: C:WINDOWSMinidump10416-21125-01.dmp This was probably caused by the following module: atikmdag.sys (atikmdag+0x42003) Bugcheck code: 0x100000EA (0xFFFFE0005A351840, 0x0, 0x0, 0x0) Error: THREAD_STUCK_IN_DEVICE_DRIVER_M
My computer was just fine and today I turn on my computer and a blue screen says "your pc ran into a problem. We'll restart for you. Error: system thread exception not handled"
How do I fix this and get my computer back? I don't even know how to get into safe mode.
This seems to be happening to quite a few people on Windows 10 it seems. It has started happening to me too lately. It happens when, say, I have one tab open to the forums, and I open another to get an image from Bing Images to make a point, or just for fun(those who know me, know what I mean, when I use GIF's), I download the image fine, then either switch tabs back or close the Images tab, then BAM: "IE has stopped working collecting information".
So I looked at the crash logs in Reliability History, and found out that it's iertutil.dll that seems to be the culprit:
Normally that could mean either the .dll is corrupted and needs to be replaced, OR, somehow got moved to the wrong place(accidentally drag & dropped while "surfing" File Explorer, happens to me sometimes), and needs to be moved back.
So I tried going into File Explorer and and searching the Windows folder. After about 8 minutes it was still searching (Hello! I have a Samsung 850 Pro I expect a little more speed !!!) . So I opened up UltraSearch, pasted "iertutil.dll" in and immediately got this:
as you can see, the path(s) are correct, but I see there are a few WinSxS files also. There could be a possible corruption there, is what I'm hoping.
What I'm going to try, is, cleaning out the Side by Side folder so well as I can using Disk Cleanup and the Extreme version of SFC-DISM:
I've been having this issue for about a week where any time I try to upload a file in Chrome or open a file in Photoshop CC, explorer will crash the program. It happens any time I try to navigate to another folder. If I leave the initially loaded folder open everything is fine and I am able to upload/open files from that folder. Explorer itself doesn't seem to be crashing, just the program that is bringing up the window. windows 10, chrome and photoshop are all up to date. Saving is working fine. Dragging and dropping a file when available is working fine. I've tested the ability to navigate folders and upload/open files in Firefox, Google Sketchup, Clip Studio Paint, and paint tool sai, those programs are working.
Under the Network tab of File Explorer, I can see three entries, one of which is my router (with attached Hard Drive) and two computers, each running Windows 10. When I expand the router entry, I can see my hard drive files. I can also see my Users icons when I expand one of the computer's tabs. However, when I click on the other computer's name to search for users, all I see is a message that "This folder is empty". In fact, the folder is not empty, as there are two users on the computer. How I can get this computer to show users, etc.?
Using Win10 Pro x64. I would like to disable windows showing .zip files in explorer as a folder...When you highlight it the contents inside the .zip are shown in the right pane view. I've scoured the net and found ways for Win7(which I did disable .zip folders on my other Win7 machine) and Vista, perhaps 8 too but I don't want to risk trying a method for older versions of windows. Any solution/reg hack or whatever to disable .zip folder?
I just installed Windows 10. Not sure if I like it, but I'm trying hard.
Problem: When I go to File Explorer, in the left panel, when I click on a folder name, the contents of that folder (both sub-folders and files) show in the right panel.
In the left panel, when I click on ">" beside a folder name, it will expand in the left panel showing the sub-folders, but not "loose files".
I could have sworn that in earlier versions of Windows the files also showed.
Is there a option setting somewhere to change this behavior and to show the files also in the left panel?
Recently I am notice Media Player is crashing while Groove cannot even find a single media file out of 100GB music. Audacious stupid Groove asks: "My dear please tell me where to search for your lovely music files?", but then turns over and goes to sleep. Very disappointing. Now I cannot play any music neither by Media Player nor Groove.
In Windows 7 when I open Windows Explorer it comes up with a very simple window that has very basic tabs, Organise, Share With Burn, New Folder. Organise then has a very basic drop down menu.
When I use File Explorer in Windows 10 it comes up with a much more detailed menu that offers four menus, File, Home, Share, View.
Is there any way I can use a window similar to Windows 7? I'm sure it is there somewhere as when you attempt to open a file in an application a window identical to what I want comes up to allow the selection.
On my Surface Book I've noticed it seems to take about 1.5seconds from pressing the file explorer button to it opening whilst this isn't slow my Surface Pro 2 opens instantly just wondering why on a brand new machine its slower than a 3 year old lower spec model?
This is the second time I have posted about the same problem. I can't move file explorer to the task bar. I tried to move it by right clicking on start, then left click on file explorer the menu I get that way just says "pin to start" and more, when I click on more all that is there is don't show with this list, if I left click the start button and then left click file explorer the menu only says "pin to start". I am at a loss, I have had one problem after another with Windows 10 and considering going back to Windows 7. I have tried to revert back to windows 7 from windows 10 but that failed, the only other option I have is to format the hard drive and reload Windows 7. I understand by doing that I will get the Windows 10 10 upgrade icon in the right hand corner of the task bar. How do I get rid of that?
As the title says I am unable to "see" my NAS in windows explorer. I was able to use explorer to view/add/delete files on my NAS a few weeks ago but now now cannot even see the NAS in the network section. Funny thing is that I am able to ping the server and even login to the GUI via IE and firefox. But i can't get the media files.
I am currently running the evaluation copy of Windows 10: Details: - Windows 10 Pro Insider Preview - version 1511 - OS build 10565.41737 - 64Bit - Intel i&-2600 CPU with 24GB of RAM
I have tried the follow to correct the issue with no success: - Rebooted windows 10 machine (several times) - Rebooted Router (Actiontec V2000H) - Rebooted NAS (FreeNAS 9.3) - ipconfig /flushdns - change from using PIN to password - Change from password to PIN - using regedit added the AllowInsecureGuestAuth = 1 to the registry.
Notes on NAS: using Freenas 9.3, ZFS volume, enabled CIFS shares. do not require login to access media files (or any files). The server only has media files on it so no password required or enabled.
Notes on Network: - The network is hardwired with Cat 5e cable (except for wireless printer) - Windows 10 explorer is able to "see" other windows machines (windows 7 and 8), an Linus Ubuntu 14.04 machine, router (Actiontec V2000H, printer (wireless), AV receiver, - the windows 7/8 machines are able to access the media files on the NAS with no issues and are able to see the windows 10 machine. - the ubuntu 14.04 machine is able to access the media files on the NAS with no issues and is able to see the windows 10//8/7 machines on the network.
I like windows 10 but it will be a show stopper if I cannot access my NAS from this Windows 10 machine.
I've had windows 10 since November and just today it's been playing up. None of the apps open - they display a message "element not found" for explorer exe or for other things like chrome, ms word you click on it and nothing happens. Can't even turn off the computer (start > turn off just does nothing) I've tried pressing the power button on my PC but that just seems to put it into sleep mode and not properly restart it.
When in file explorer, I sometimes want to print out the list of names of the folders and files for reference or to bump against another list of names of folders and files. The "share" option lists 'printer' but does not work properly. It only wants to print photos.
Wanted to put Desktop into Quick accessInstead of that I managed to move somehow This PC, Network, C: and D: drives, and the rest under Desktop. So, when all collapsed, only Quick access and Desktop remain.Consequently, all links and hierarchy is wrong, can't open Outlook, some other folders, not even Start Menu can't be accessed.No permission despite I'm the Admin.
Is there a way to DISABLE in file explorer this stupid thing from showing me Quick Access, Libraries ETC .. I want the thing to open at the root directory of my drive ONLY and every time.
Secondly - is there a way to disable the auto locating (not sure what to call it) feature in file explorer - .. when I navigate to a location - I WANT IT TO STAY THERE .. not jump around again like it thinks it knows what I want - IT DOESNT
I can not see anything in File Explorer. I use to be able to see my drives and so forth. Also any of my personnel folders and files. look funny. some are just blank icons now.
