How To Boot From USB Image After A Failure

Oct 29, 2015

I know I have to ensure BIOS has the "Boot from USB" selected. Then what happens as I have never done it. 

View 2 Replies


Similar Messages:


USB Failure On Boot Up

Aug 16, 2015

I successfully upgraded to Win 10, which was an achievement? It all appeared to be working fine until I had to restart the PC. During the boot process the USB ports stop working.

. During the BIOS process the USB ports function.
. Once Windows starts the boot process the USB dies.

I reboot several times to get into the diagnostic tools and have to role back to Win 7.

I have checked and loaded the latest NVidia drivers but am unsure of the next step. 

View 5 Replies

Boot Failure - HP Compaq Won't Load OS Or Even Safe Mode

Jan 10, 2016

Hp compaq running win 10 was running fine, but now won't load windows or even safe mode. I do get a blue screen message sometimes that reads BAD SYSTEM CONFIG ...
 
There was a storm and she said the machine froze also the HD is a Seagate and of course no backup ...

View 7 Replies

Cannot Boot Unless USB Drive With Image Plugged In

Jul 15, 2015

I can not boot in uefi mode or with secure boot on, I can only use CSM mode. Also when I try to boot without usb drive(which has win 10 on it) in computer it just shuts down and then turn on back and give me error that all boot options have been tried press f4 etc

View 9 Replies

Restoring Image - Inaccessible Boot Device

Feb 10, 2016

Today I tried to copy my windows 10 ssd to a new ssd I used macrium reflex 6 and image for windows the last version

After the boot, I disconnected my other drivers ,but i got inaccessible boot device I can't boot anymore...

Does restore an image of windows 10 to a new ssd ? I tried macrium bootloader fix without luck...

View 8 Replies

Boot Time 2 Minutes - Driver Power State Failure Error

Aug 21, 2015

It take 2 mins for the laptop too completely boot up what is wrong. Also i got bsod few mins ago that read driver power state failure.

View 1 Replies

Installation :: Apple MBP / UEFI Installation Won't Boot After Image Apply

Aug 25, 2015

last few hours I spent trying to manually deploy Windows 10 on clean GPT disk but after applying image and rebooting I always end in unbootable state.

I manually setup drive like this:

Code:

select disk 0cleanconvert gptcreate partition primary size 350 #RE tools won't fit 300MB anymore :-)format quick fs ntfs label "Windows RE tools"assign letter tset id de94bba4-06d1-4d40-a16a-bfd50179d6acgpt attributes 0x8000000000000001create partition efi size 100format quick fs fat32 label Systemassign letter screate partition msr size 128create partition primary format quick fs ntfs label Windowsassign letter wlist volumeexit#no recovery image partition as per documentation it is no longer needed and followed by pretty common deployment:

Code:

dism /apply-image /imagefile:g:Sourcesinstall.wim /index:1 /applydir:w:dism /image:w: /set-Timezone:"Central Europe Standard Time"md T:RecoveryWindowsREattrib w:WindowsSystem32RecoveryWinre.wim -h -s -rcopy w:WindowsSystem32RecoveryWinre.wim T:RecoveryWindowsREwinre.wimbcdboot w:windows /s s: /f UEFIw:WindowsSystem32
eagentc /setreimage /path T:RecoveryWindowsRE /target w:Windows

After reboot I always end unbootable (as we talk Apple computer it means 1) no partition on Option or 2) folder with ? or 3) just gray screen, make your pick). There's a chance that Windows rely on some UEFI 2.0 feature, which is not available as the old guy has 1.2 only. Or maybe I missed some step somewhere.

View 2 Replies

Suddenly Cannot Restore Image By Running System Image

Sep 21, 2015

Windows 10 Home.

I created system image backup file at least once a week. I did one yesterday, and today I needed to run it to restore my system. To my horror, I cannot find way to run it. I ran system image backup restore multiple times. I know how to do it...... until today. Today, by the time I clicked Troubleshoot option, there is no Advanced Options to choose from. Instead it sent me to Startup Settings option where I could go to safe mode etc,

I ended up running a system restore. Good thing I do create restore point religiously. But, after system restore, I still have the same problem.......... cannot restore image by using system image backup.

adding............... I went to my other laptop running Win 10 Pro, I had no trouble running system image restore. 

View 15 Replies

Name Of Image On Lock Screen Image

Mar 5, 2016

Why doesn't Windows provide the location of the spotlight lock screen image? I really wish they would. Any one else see an image and wonder the physical location of the image?

View 3 Replies

Installing To New HDD After HD Failure

Nov 9, 2015

I have a Dell XPS from around 2011 that came with Win7 Home Premium, and recently upgraded to Windows 10, worked great for a while. Win10 started acting erratically so I tried a restart, and could not get much past the BIOS part. It would get to the point where a sad smiley face came up, and windows attempted to fix problem, but could not. After extensive research, HDD is the failure and needs to be replaced. I have to get a new HDD.

Question is, how do I get Windows from my non-functioning HDD to a new HDD (or possibly SSD). It is an OEM copy from Dell of Win7 originally, and still have the COA sticker on the case with the product key.The computer is otherwise great, and I have no problem buying a new drive, but want to see if I can avoid having to buy windows, since I already have it on that computer. I do not have the Dell media anymore.

If I buy a new drive, will I be able to download some files from Microsoft on a USB drive or something to download win7 or win10 and use the COA product key to re-install windows on the same machine (just different HD of course).I have searched through the threads and not found a problem quite like mine with the new OS. Also, I like Win10, but if necessary, just want Win7 at a minimum and can re-upgrade later.

View 1 Replies

BSOD :: Video TDR Failure

Oct 12, 2015

My computer is working fine, and I click on a video, and my screen just goes blank. Then my computer shuts down and restarts. Then a blue screen comes up and says Video TDR Failure. How do I stop this from happening.

View 1 Replies

Update Failure To Load?

Nov 17, 2015

Upgrade to Windows 10 Home, version 1511, 10586 fails to load. I restart and the message says my pc is up to date but in update history the upgrade is missing. When I do a search for updates, the message says the upgrade is available but when selected It does not load. I have tried several times but keep going around in the loop. Below are screenshots of the messages.

View 18 Replies

Connection Failure To Homegroups

Nov 24, 2015

Perhaps I am a little daft on homegroups, but all I want is to have 3 ethernet connected machines in my house and one Wifi laptop to use a homegroup. However every time I attempt to create the homegroup and then join the homegroup with a second pc, the second machine tries to connect and then windows comes back with the message that "Windows no longer detects a home group on this network". So I delete the home group from the first machine, turn both machines off and try it again only to get the same message. I have let Windows trouble shooter try to solve the problem but of course it doesn't. I have made sure that my firewall (Bitdefender 2016) is not preventing the other IP addresses from seeing each other. I have done this 5 or 6 times to no avail. I thought it was supposed to be easy to get a few pc's to share files but this wonderful homegroup tool does not appear to work. I am using a Lynksys WRT 1900AC router with a Lynksy WRT 8 port switch and all the machines are connected via ethernet except the one laptop.

View 10 Replies

Windows Service Connection Failure

Nov 5, 2015

I bought a new PC a few weeks ago with Window 10. Worked fine for a while and now when I switch on and type my password I get a message in the bottom right hand corner of the screen stating "Failed to connect to a Windows Service"

I googled this problem and the advice given was to run the command prompt as an administrator and type netsh>winsock reset

However, when I right click on the command prompt icon and click run as an administrator nothing happens. A few minutes later an error message pops up on the screen stating "The service did not respond to the start or control request in a timely fashion"

If I left, click on the command prompt icon the command window opens immediately.

View 2 Replies

Networking :: Failure Accessing NAS Drive

Jan 17, 2016

I wasn't really sure what section to put this in since it could be security and/or network. The problem is I can see my NAS in file explorer and I can ping it fine and I can even access it via FTP but if I try to access it I get the following dialog box.

I did a little bit of searching but nothing worked and reverted my changes. This is a fresh install of Windows 10 Pro 64bit. The NAS is about 10 years old, it's nothing fancy and uses a Samba architecture.

Bottom line it'd be sweet if I could access this directly through windows instead of FTPing a file.

View 3 Replies

Failure To Download Email Attachments

Nov 9, 2015

I have recently received four emails with attachments that have failed to download. The attachment icon is in place but at the bottom the notice 'download filed' appears.

View 12 Replies

BSOD :: Cause Of Failure Varies - How To Rescue

Feb 1, 2016

- free upgrade from Windows 8
- no USB key as boot insurance
- completely unstable. Won't stay up for more than 10 minutes before freeze or crash
- multiple blue screen messages including the following:

- driver IRQL not less or equal
- kernel error
- KMode exception not handled
- system service exception
- bad pool caller. (Honest I didn't call windows a bad pool :-)

above are are all blue screen but I also had windows trying to correct itself. Messages included

- need correct BIOS startup media
- windowssystem32configsystem
- error code 0Xc000098 (may not have been 98 as pic died before I could record it)

i also got got close when windows asked me if I wanted to Save Files and rebuild Windows. I said sure and it started percent countdown. But then instability killed this and it never finished

i can get to my desktop but usually only for a minute before crash. Read on a forum about maybe disabling IRST Intel rapid start technology but I could not find this in my control panel. Maybe I have to intercept the bios during startup? Sometimes I am given access to the bios screen and I can navigate with my arrows safely.

View 4 Replies

Failure To Restart Repaired With Update

Aug 29, 2015

New HP 15. Upgraded to Windows Ten 2-3 weeks ago. When updates began being pushed and a restart was required, my laptop would freeze during restart. I would then power down / up and all is well.

I noticed during restart my wifi lamp would go orange (disconnected) and cycle to blue (connected). If I powered down / up the same sequence would occur followed by my audio off lamp (orange) illuminating.

Happened every time. Figured it had something to do with an audio driver but I don't have the knowledge to say if it was that or the phase of the moon.

Today I received update KB3081448, went to restart and it actually restarted. I knew when the speaker button lit I was good.

Just for s&g, I have "restarted" 5 times in about the past 30 minutes successfully. What the update is or if it's a coincidence however restart now works. Just throwing this out there for those who may be documenting all this stuff.

View 3 Replies

Start Button Failure Since Upgrade?

Aug 11, 2015

Since i've upgraded to Windows 10 from Windows 7, my Start Button, Cortana, Search, App Store, and Action Center have stopped working. I've had no problems installing updates (no hangs). The latest update today (8/11) has not fixed this issue. I cannot roll back to Windows 7 (It says the files are no longer available). I do not want to do a clean install,

View 3 Replies

Failure To Send Messages Through Skype

Dec 4, 2015

Every time I try to send a message thru the message app it doesn't send thru Skype. It always fails to send .

View 5 Replies

Crashing Due To Power State Failure

Aug 2, 2015

I'm having a big problem with my computer. Bot win 8.1 and win 10 are crashing due to power state failure.

On Sun 2015-08-02 17:34:58 GMT your computer crashed

View 1 Replies

PC Keeps Crashing - Memory Management Failure

Oct 8, 2015

I installed windows 10 forever ago on my main pc and it ran beautifully I wasn't experiencing problems like other people that i've heard about, but this morning around 8AM my pc decided to crash, was watching hulu on my left monitor and playing a little flash game on my right monitor, windows crashed and the message popped up "memory management failure" also my pc just crashed again while typing this, literatly just crashed as i was typing this. with a different message somthing about "memory securtiy kernal" and ive also got another crash that said "Critical process died" . I'd prefer to keep my data.... and if the memory management is suggested as my RAM, this RAM is less than a year old.

View 1 Replies

Kernel Security Failure Reboot

Jan 18, 2016

So, I built my grandparents a computer and they upgraded to windows 10. now they keep getting the error message "Kernel Security Check Failure" then the computer reboots. I was told I should upgrade drivers as since it is a custom computer it can't do it itself during the upgrade. Is this the right thing to do. I also download their motherboard drivers and it comes in an all in one package from AsRock. I can only do this over facetime which is hard because they aren't the best with tech. They run setup and it installs AMD catalyst then finish's install which doesn't make sense as the download package is 550MB large.

CPU: AMD FX-6300 3.5GHz 6-Core Processor ($148.08 @ Vuugo)
Motherboard: ASRock 970M PRO3 Micro ATX AM3+/AM3 Motherboard ($97.62 @ Newegg Canada)
Memory: Kingston HyperX Fury Black 8GB (2 x 4GB) DDR3-1866 Memory ($65.52 @ DirectCanada)

[code]....

View 1 Replies

BSOD :: Kernel Security Check Failure After Using WMP

Jan 11, 2016

Yesterday i upgraded my 8.1 to 10. The first time is still smooth but suddenly after i installed all the driver my laptop needs, when i play a song using WMP and turned the 'repeat all' option, my laptop gone to BSOD.

I tried to read the Minidump file using WinDbg but it needs to download the symbol pack, unfortunately my internet connection is very slow.

My laptop BSOD again after using WMP (playing a song) and Photoshop CS6... BSOD again after that because I Used Photoshop.

View 3 Replies

Updates :: Update Leads To Reboots - Failure

Aug 15, 2015

The latest Win 10 update (from about 8/12) has really hosed me. Every morning the computer tries to install it, fails, and then removes the update. No error codes. This take about six reboots and half an hour. Never ran into this before. I'm about to roll back to Win 7 if I can't resolve this.

I tried the trick of setting "metered connection" in the Wi-Fi settings, but that did no good, apparently because the update is already stored on my machine...

View 6 Replies

Installation :: Media Creation Tool Failure?

Jul 29, 2015

After reading an article in PC World, I decided to use the Media Creation Tool to create an ISO version of Win 10 on a USB drive. I downloaded the tool and ran it. All was well during the Win 10 download and download verification. The program then moved on to setup the USB when the terribly informative message appeared..."SOMETHING HAPPENED". THAT'S IT!!! Upon which the program terminates. I repeated the process once with the same results.

View 13 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved