I have four primary partitions (System, C: , D: , E: ) and some free space in my Win10 laptop. Now, I want to make create an extended partition which will hold C, D & E as logical partition. How can I do it without loosing data (i don't have a spare hard disk where I can backup the data).
View 6 Replies
Need to make a ext4 logical partition but it is allowing only primary:
View 9 RepliesSo I recently bought a ssd to add to my pc so that I could add my OS and some other files on to the ssd and keep my old hdd as storage. After finally getting the OS onto the ssd and being able to boot from it I tried to transfer all of the files back to the original hdd from the backup I had made from the ssd after cloning the drive. Once completed the hdd was no longer showing up at all in my computer so I went into disk management and tried to set a path for it, but it was now split into two partitions (I am assuming because I took the backed up ssd and put it onto a hdd because the size of one of the partitions is the size of the ssd). I tried formatting both partitions and then extending it to combine them but whenever I do this it tells me there is not enough space on the disk to complete the operation.
View 1 RepliesI was using my machine normally when it suddenly went dead while using file explorer, no BSOD, just stopped, no cpu activity light, nothing responsive. I had to power off at the PSU and then re-start which it did.
A few hours later I went to access files on an external drive (a 300Gb Seagate) and it did not show in explorer.
I looked in the Windows Disk Management utility and saw my previously functioning drive is now listed as "Healthy (Recovery Partition)". Right click on the disk description gives "Convert to dynamic disk" as the only ungreyed option and greyed out RAID configuration options. I don't have RAID enabled in BIOS, I did earlier this year.
I used this drive for backups and I think I had an emergency boot from dos file set in a folder. Could Win have scanned that and re-configured ??
In Properties, it gives no indication of used and free space, and shows it as having a Master Boot Record partition style.
In 32 years of computers, I have not come across this before, so, do not know what to do to get my data back. Its one of several weird problems since doing a Win 7 to 10 upgrade
Noticed this #2 partition, (128MB), on my lappy, is it serving any purpose? Best way to include it in the C: partition
View 9 RepliesAfter I free upgraded from 8.1 to 10 a new partition showed up. I just deleted it and it became unallocated space.
How can I merge this space with my primary partition. Both are on a 256 SSD.
When I right click C: in disk management, the extend volume choice is grayed.
So I recently formatted my Windows 8.1 system and installed Windows 10. But it seems that the setup decided to set my System parition to a separate HDD (G: ) and put the bootmgr and all the boot files there, instead of using the left-over 350MB System Reserved partition on my primary SSD that Windows 8.1 had used. So of course now if I removed that disk, I wouldn't be able to boot anymore.
So what'll be the best way to move all of the boot files and system partition setting back to my old 350MB System Reserved partition? Will I need to disconnect all the other drives and do a repair install of Windows 10? Or can I manually move the files and partition settings over? The old partition is still marked as Active, so maybe I can just move all the Boot related files from G: to the 350MB partition and it'll just work? Maybe mark G: as INACTIVE too
Anyway, a while ago, I was playing with booting installations from a HDD, which worked, but now it seems I'm stuck with the partition I used to store the installation on.
So I have two questions:
1. To delete the H partition, I need to first set the C one to active, correct?
2. Is it even safe to delete the partition since it's a "system" partition?
The H partition is empty as far as general files go, but since it's bootale, it always shows up as a boot option, which is mildly annoying.
Image: [URL] ....
I read that a clean install rebuilds partitions and makes a recovery partition.
My question is does it allow you to pick the size of the partition that Windows 10 is installed to ?
I have a 1 terabyte drive but like to install in a 100gig partition.
I think I will delete the existing partitions before I start
Some weeks ago I converted to win10, I did not like it so I reverted to win 7.I like windows media centre which I use a lot. I also found in win 10 that my home movies which are mod files did not convert properly ie the thumbnails did not show what the content was.The upshot is that I lose on the conversion.I read recently that Msoft are going to force convert in the future and I do not want that to happen.What do I have to do to get them to respect my wishes?
View 1 RepliesI recently purchased a Samsung M3 slimline 1TB hard drive to backup and create a system image of my PC onto. I plugged it in and it installed all the necessary device driver software however when I go to create a system image or backup I get this message:
Windows Backup skipped backing up system image because one of the critical volumes cannot be included for backup. Check that volume is online and is formatted NTFS.
After going into drive manager I saw that I had a volume/partition called ESP which was FAT32 and was 500MB. How do I change this to NTFS so the backup/system image works and out of interest what even is ESP? When a tick box comes up on what I would like to create a system image on, the C: drive box is ticked as well as the ESP box however they are blanked out so I have to select them.
So, not sure what it is that I did but something to do with one of the Microsoft services had me sign in using my email and password to the live Microsoft stuff (might have been trying to play solitaire).
Now when I boot up my desktop, it's always asking me for my password which I don't want to deal with as it's quite the extreme password. I think prior to signing in on Solitaire Win 10 never asked me for a password as it was being used local account.
How do I switch it back to being a local account so that I don't have to sign in to my desktop every time that I start it up.
URL....From the registry?
I know that in this case I need also to know what is the primary display or how to get only the primary display value because I want to get the value that set only for the primary display..The key "LogPixels" in HKEY_CURRENT_USERControl PanelDesktop Is no longer relevant for me in Windows 10.
I've some AVI and MP4 files with external .SRT subtitles that I'd like to convert to MKV with embedded subtitles (not forced).That way I can forget about the .srt files that don't always play properly on MEZZMO / SERVIIO or PLEX when streaming. The embedded ones always work properly !!.What's the best setting for Handbrake so I don't lose (or lose minimal) quality when re-encoding -- MP4->MKV should be almost a 1:1 copy but I'm not sure of the settings.
the subtitles all work though when embedded even if the original .SRT file didn't when streamed. (VLC always works BTW but I want to play these files on REMOTE DNLA devices).
I know I need to disable secure boot in order to change the boot sequence. I ran into an issue trying to install Windows 10 on a GPT partition - it said it couldn't do it. So...after much searching, i learned (??) i need to use diskpart to clean the partitions to create one large unallotted space which would then allow me to install Windows. My question is, can i convert the disk to mbr and install Windows to it that way and run it in that mode. If i can do that, what would be the command to do that? > convert mbr after the clean command?? What about enabling secure boot?? Can i do that if i have installed Windows under MBR rather than GPT?
View 8 RepliesI am currently trying to convert my mSATA SSD from MBR to GPT. I have downloaded EaseUS partition master and can see that I can convert the disk using the software. My question is however if this is possible to do with my mSATA drive that my PC boots from and has Windows 10 installed or does it have to be a drive that is not booted from. I know there are lots of threads on this however none specify of this is possible using the drive you are booted from.
View 1 RepliesIn build 10240 I can download a Danish language pack in Settings. However I can't set it as primary... How to do this?
View 5 Repliesis there any way to use SSD as cache to speed up primary HDD with Win10? I happen to have a 24GB Intel 313 drive I'm using for linux but I was wondering if I could use it to quicken my Windows...
View 2 RepliesI did something terrible to my tablet, I converted the partition from GPT to MBR in a desperate try to install windows 7.Now tablet is not reading any usb I plug in, and of course I cannot format disk again because it doesn't recognize anything, always booting at uefi shell.
View 7 RepliesToday, I tried to remove my old windows 7 (installed in drive D), dual booted with window 10.
However, I couldn't remove it because it was a System, Active, and Primary Partition.
And my Default Windows 10 drive C was Boot, Page file, Crash Dump, and Logical Drive (as shown in the picture)
I currently I have W8.1 which is running on a HDD. For Windows 10, I am upgrading to a SSD for my OS, some programs, etc. Thing is, I want to keep my HDD for a storage drive. It has many pictures, videos, songs, etc that I want to keep. Problem is, it is currently loaded with Windows 8.1 and some programs that I would also put on the SSD. How do I just get rid of Windows from it to make it my storage drive? Do I need to? Should I just get a second HDD entirely and find a way to move my pictures, video, songs, etc to it?
View 1 RepliesI used a SSD to put the OS and other required things. I received my hard drive a few days later and just connected it. How to set up my new hard drive as the primary for installed applications, such as games. I would still like to use the SSD for my more necessary applications, but want the hard drive for large files. I am on windows 10 btw
View 1 RepliesI've about 4 SATA HDD's that I've removed from computers that I've junked -- all SATA about 12 TB.
Is it possible to build an enclosure and create a NAS drive -- I can easily make external USB drives but I think a NAS storage system would be better. What I need to do --should in theory be easy just need some sort of network card and an OS.
My task bar is locked and located on the right-hand side of my second monitor. Occasionally I'll go for it and realize that it is now located on the right-hand side of my primary monitor. Most recently this happened after bringing my computer back from screensaver.
View 7 RepliesWith the new W10 email client, either with my main account or a second Outlook account, it always picks a random alias for the 'From' address when creating a new email. In the web mail settings I have each account set to send from its primary address and W8 PCs Windows mail clients have an option to choose the used email address.
Where is the setting in W10 and how do I get this under control? This can't be an issue for most as the forums would be full of it. What am I messing up here? The email app is currently useless to me.
I have a configuration where win 10 is installed on SSD but the Users folder is on a dynamic disk on HDD and the linking is made by a hard junction link from C: to D. I have removed paging on D as well as protection. Hence, I am able to remove all volumes of the dynamic disk and convert it back to a basic disk and format it.The problem is that I would like to keep all my installed programs (and settings, preferably). I have copied the Users directory to an external disk and copied them back to D after conversion. This seems to lead to a nonfunctional situation where I cannot even add a new user and most programs (even not all windows tools) do not work.What would be the best approach to avoid reinstalling the programs and to keep existing users?
View 2 Replies
