Got a new DELL that comes with windows 7 Pro. and I upgraded to windows 10 Pro with no issues. Later I found out that I "should " have Upgraded using the "Windows 10 Media Creation Tool" instead of "Get Upgrade". How can I get the installation Media now with the Iso image, so that I can make a copy onto a DVD, so that I can do a clean installation in the future.?Is it that the "product key" or digital entitlement ONLY works for this Dell machine alone and NOT transferable?
i'm having an issue with my laptop, i think it's something called a memory leak because my RAM won't go below 80% even when my laptop is idle. I've been searching the internet for answers on how to fix this problem but didn't find any luck. I've already wasted an entire day trying to figure out how to fix this, I even tried to do a system restore but i forgot to save any restore points. I'm hoping Resetting/Refreshing would be the answer but i'm facing another problem; My media installation tool or USB Bootable Drive (I don't know if they're the same. It's what i used when i installed Windows 10) is that of a previous Windows 10 version & build. Would it work If i use it to Reset my laptop? I'm currently using the latest version, build 10586.36.
I originally purchased Windows 8 and upgraded to 8.1. I installed the Windows 10 upgrade via the downloadable Windows 10 Installation Tool and burning the ISO to a DVD. I understand that this will work to upgrade my system should I need to recover but will this still work after the 1 year free upgrade period? Also, how to confirm if the ISO downloaded via the Installation Tool will work as a repair disk to recover using a system image? If that's the case I would be content with that, as it's how I've always done backups since Windows 7.
I've been trying to create USB boot device for W10 but the program closes without warning a little while after it reaches the analysis stage (after 100% download)
I've tried 3 times now and can't figure out why its not working.
i decided to reinstall everything starting with windows 7 then upgrading or using the free upgrade that i initialy used to get windows 10. but it seems that offer is no longer on the start menu bar task bar.
i have the img of windows 10 pro burned from media creation tool to a dvd.
can i use the dvd to simply just upgrade windows 7 to windows 10?
or do i need a serial key for windows 10?
i had some trouble with curse client and some audio stuttering in windows 10 when i used the free upgrade, but it didn't show until after i installed call of duty black ops III where it said i needed audio below 44000khz (sound blaster Z) to be able to open the game....... : and a bunch of bsod out of nowhere. i havent had a bsod on windows 7 for over a year so idk where that came from.
is there a upgrade function from the dvd (windows 10 pro; as in the free upgrade) or do i need a serial specifically for win 10?
This worked for me a few weeks back. Today I am looking to try to reload Windows 10 on one of my desktop PC's that has just never been right after upgrade from Windows 7. I figured, trying a clean install is in order. The trouble is, as of today, the MediaCreationTool is not working for me. I get the same error on all 3 of my Windows 10 computers: "Setup couldn't start properly. Please restart your PC and try again." I can say that the mediacreationtool worked splendidly a few weeks back, but I have already repurposed that jump drive so the media is no longer in tact.
Specifically, the tools on this page are not working for me: [URL] ...
My PC's have always been real smooth, but now all three are just not quite 'right'. Mouse disappearing hear and there while I am dragging it. Pauses before I can type, etc. Just weird random anomalies that are far from normal.
The Media Creation Tool will NOT run at all on my Windows 7 Ultimate desktop and my Lenovo Yoga 2 Pro with Windows 8.1. When I try to run it, nothing happens after clicking the message that allows it run. I know it does not start immediately but I have successfully run it on two other PCs with Windows 8.1. I've spent the better part of the last four days trying to get the Windows 10 upgrade installed on my desktop.
After starting the "tool", I've even let the PC sit overnight to see if it would ever start to run. It never does. I've rebooted numerous times and I've also tried running it from that PC, from a network drive and from a USB drive ("Run as Administrator" does NOT work either). Nothing works. I was able to create both a USB and DVD setup disk using the Media Creation Tool on a different Windows 7 Ultimate PC so I've also tried using both of those options to upgrade my desktop PC. If I boot from either the USB drive or the DVD, I can install a new copy of Windows 10 but, of course, cannot enter a product key that works so that does not work.
However, if I boot normally and then run Windows 10 setup.exe from either the USB or DVD, it does NOT run at all (just like with the Media Creation Tool). For a brief moment the other day, I thought I might have found the problem... I forget that I was starting to run low on disk space on that SSD. It was down to 21.6Gb available which, I think, should have been enough disk space but it might be borderline.
So I did manage to get the free disk space to more 50Gb. That, however, did NOT work at all. I've tried about every possible scenario multiple times and have gotten nowhere over the last four days. I even tried Microsoft chat support yesterday but started off with 454 people in front. I wasn't in front of my computer when my turn finally arrived -- so I missed it. Haven't tried it again but don't expect much from that anyway.
When you use the creation tool and enter the type os system etc. and it creates either a USB or a DVD is the file that you receive close to the latest ISO?
I got myself a new 120GB SSD for the jump to Windows 10. I install the OS without problems from a DVD disk, boot up and begin to install stuff as steam, spotify and GeForce experience.
I remove the installation disk from my DVD reader and reboot. After the BIOS screen I get a message that claims there are no bootable media.
With the installation disk in the DVD reader everything works fine, I get an option to boot the installation even though the DVD is nr 2 in boot order after my sole storage unit.
I have tried to use all those bootrec commands to restore, repair or create a new bootmgr and so on. No installations of Windows can be found either. Been doing this for 6 hours now. I have reinstalled windows 10, 8 and 7. All with the same problem.
I plugged in one of my older 60GB SSDs and successfully installed Windows 10 on it. No sign of any boot problems. Booted without the installation disc. Same SATA connection on the motherboard. No changes in boot order.
So my thoughts about this right now, is it possible my new SSD have a defect from the beginning? Something in the hardware/hardware controller?
And yes I have searched around and Everyone seems to get it working with bootrec commands. I don't...
I am in the process of downloading with the choice 'for another computer' and using a USB flash. At the last minute I put a label (Win10-1511)on that flash drive which did show up as the drive of choice.
The actual download files are landing in the root of C: on this desktop other than going directly to the 32GB usb drive plugged into a usb2 port. Is this the normal routine? If it is not routine can these files be moved from C: to the USB drive and be usable?
The reason I chose this type of download is that my internet connection to a local tower was intermittent yesterday and the connection stopped while downloading to a laptop through Windows Update at the 98% point. That was an all day download aborted. The process had to be started all over again at 7p.m. The update completed at 3.30 A.M......successfully.
What can I do now that most troubleshooters in Windows 10 won't work since I think most of them are not available for Windows 10 It worked completely fine for me when I had Windows 7.
The Media Creation Tool is corrupted for me now that I am using Windows 10 but I want to clean reinstall Windows 10 with the Media Creation Tool.
trying to update by media creation tool downloaded ok and created iso dvd. on running i cannot keep personal files and apps it says you cannot keep windows setting, personal files and apps because you have chosen to install windows 10 using a different language to the one you're currently using.
Trying to get the latest ISO with "Sp1 (I know its not called that)" already on there. I downloaded the media creation tool it errors out when selecting create a USB boot drive and when I download the ISO and try to burn that I get "Cannot read into from ISO file" - There is no where I can download a straight .ISO from Microsoft without going through this media creation tool !?
In July I downloaded the Media Creation tool and created an USB version of the 29th release. I then used it to upgrade 2 pcs successfully. Now, I think I want to do a 'clean install' on a new ssd on another machine. Can I to I clean install with that USB? Seems to me I would have to have a product key or something like that to do an install on the blank ssd. If so where would I get one?
So I ran the media creation tool and instead of choosing to upgrade this PC, I chose to write it to a USB stick so that I could do the upgrade at my leisure. So, I spent the time to download the 3 or 4 GB (we have super slow internet here) and put let it write to the USB stick. I then rebooted to the USB stick but there is no "upgrade" option and it asks me for a W10 product key.
Do I really need to run the media creation tool all over again and re-download that 4GB this time choosing Upgrade this PC or is there a way to run the W10 installer from the bootable USB flash drive that I've already got and do an upgrade instead of what it seems it's going to do a fresh install only from the USB drive.
When Windows 10 first came out I was easily able to create a 32-bit/64-bit hybrid install on a flash drive using Media Creation Tool. I now want to create one for my dad who is having trouble getting his system updated but can't find this tool anymore, only the individual ISO's for 32-bit or 64-bit. Did MS take down this tool? Is there somewhere else I can get it?
I downloaded the ISO using Ms's creation tool -- I selected create ISO.
After the download it prompted me to burn to a DVD -- I didn't want that because I was going to use rufus to create a number of USB sticks so I exited the program.
Before you answer this i would also like to know if there is any way to upgrade from windows 7 enterprise? If there isnt can you tell me why this wont move its been on 0% for 2 hours now!
After reading an article in PC World, I decided to use the Media Creation Tool to create an ISO version of Win 10 on a USB drive. I downloaded the tool and ran it. All was well during the Win 10 download and download verification. The program then moved on to setup the USB when the terribly informative message appeared..."SOMETHING HAPPENED". THAT'S IT!!! Upon which the program terminates. I repeated the process once with the same results.
When trying to create Windows 10 installation media on a USB drive with media creation tool,despite having a 16gig USB drive plugged in and recognized by my laptop it's not being recognized by media creation tool..(refresh does nothing)
Question #1..does this USB drive need to be empty with no other files on it whatsoever? Question #2..this USB drive was formatted in Windows 7 initially,do I need to reformat it now in Windows 10? Question #3...Why the heck am I doing this on a relaxing Sunday afternoon??..??
My laptop was upgraded to Windows 10 two days ago but my desktop has not received the green light yet. I was reading that if you downloaded the Media Creation Tool from Microsoft's web site that it had an option that would allow up to upgrade your PC or create an ISO install disk. I downloaded the app on my laptop and created an ISO disk as a backup in case I need to do a clean install on that platform but when I tried to run the app on my desktop it brings up the UAC prompt asking if I want to run this program and when I click Yes, nothing happens.
I read some thread somewhere that if you're having problems with this app you need to do a selective startup where you don't run any startups and you disable all of the services and after restarting, I tried this and after restarting my PC running the Media Creation app again failed to do anything .
If I run Windows Update it says I have no updates pending but it was interesting that every time I've run the Media Creation Tool it puts an entry in my update log that says the update failed. The fact is the upgrade has not failed in the normal sense only the Media Creation Tool failed.
My concern is that I have a reservation for the upgrade but that too might fail so I'd like to get my desktop upgraded to Windows 10 asap.
have a new dell inspiron 15-55580 with win 10 installed at factory. unable to create a recovery media drive using usb drive (16 or 32 GB). receive error message: a problem occurred while creating recovery drive."
Here is the problem, im trying to use the media creation tool to download the W10 iso, boot from a dvd and do a clean install, deleting all my data.
But the media creation tool seems to not be downloading a thing. for exalmple, i setup /Desktop as the download folder, but when it finishes, there is nothing downloaded. i've tried refreshing and a lot of stuff, but there is nothing. and it gets even worst.
Look at this sreenshots:
The file doesnt even allows to get deleted, it says it does not exist. The same to any change i try to do to the file.
I've tried lots of times, and lots of things. I dont know that to do, i really need to clean-up my pc, the same things happens when i try to download it to a usb flash drive.
When using the Media Creation Tool from Microsoft what is the size of the ISO that is created for X64 Windows Pro? The one I created is smaller than one I created from the install.esd file. The size I see is 3.10 GB (3,333,357,568 bytes). Can that be right?
