I installed Win10 yesterday on my desktop, but sleep is not an option on power menu. Have tried all options that I find in various forums including driver updates and system settings, but can not get a sleep mode for the power menu. Maybe Win 10 thinks my desktop is a laptop as I only have hibernate for an option.
I have tried using hibernate, but my PC "wakes" anyway and uses too much power with fans. Only power saving solution now is to shut down completely each time I walk away. I have not found the solution in forums for adding back sleep to the menu.
Apparently, I have yet another problem with Windows 10. I noticed today on my laptop that that when I right click on an application from the start menu there are options such as Pin to Start, Pin to Taskbar, Uninstall, Run as Administrator and Open File Location. However, when I right click on an application on my desktop PC, the only option I have available is Pin to Start.
Now that I've upgraded to Windows 10, I can no longer manage my slideshows for my desktop.
In Win 7 and Win 8, I could manage whether or not to shuffle my slideshow and whether to pause the slideshow when on battery power. You can see that screen by looking at my tablet, which is still Win 8.1:
Now both options are missing. I found a forum thread on how to fix the shuffle using regedit, but I have found no way to manage the pausing of the slideshow while on battery power. It is currently stuck on pause. How do I get it unstuck?
This only happens when I am on battery power, not when I have my laptop plugged in. When my laptop is plugged in, the slideshow proceeds like it should.
(I really hope they add both those options back to the options screen on the slideshow...)
I am running Windows 10 Professional 64 bit. Whenever I set the option "Turn off the display" to "Never", it reverts back to the default "15 minutes". This is under the "High Performance" profile. I have never, since Windows 3.11, ever had a setting change itself back. I have tried to change it and restart. It will either revert upon restart or shortly after. It will revert back even if I do not restart.
Ugraded from windows 10 rtm to windows 10 th2 and lost the option to restore a power plan to its default settings, so when i edit a power plan, i cant reset it to the defaults, is this normal with th2??? The first screenshot is of the option being there, well what its supposed to be and the other two are of my setup, as you can see i change a setting to see if it would pop up to restore defaults and it just doesnt....
I apparently have Fast Startup enabled after upgrading to Win10. I would like to turn it off so I am not automatically logged on when I power up. (We don't have the IDs password protected on this desktop PC.) There are very simple instructions given in a TenForums tutorial, but my Power Options don't match what is shown in the tutorial. In particular, under Shutdown Settings I have only Sleep and Lock - no "Turn on fast startup"; no "Hibernate". Since this is a desktop there is also no "On battery" options, but that is obviously not a concern. But is the option of turning on and off Hibernate available only on laptops?
My system: Win 10 64 bit Retail, MSI B150M Mortar, Intel i5-6500, Samsung 512GB SSD, Corsair 2 x 4 GB Memory, etc.
Although my keyboard and mouse are allowed to wake the PC from sleep (in Device Manager), they don't wake the PC. Interestingly, pressing the "Power Button" on my Fractal R5 case does wake it up from sleep.
When I opened up System and Security>System>Remote settings the remote tab only display the 'allow remote assistance' box and I do not see 'allow remote desktop' box.
I think someone is trying to get onto my PC and I cannot stop it.
I've got a little (really little) problem with my surface pro 3.
I don't have the option 'screen rotation" in my action center any more... It's not a big deal because I can still use that function by using the shortcut windows + 0 but it's missing and sometimes annoying to go plug the keyboard just to use that function...
I guess I should be able to turn it back on by changing something in the regedit...
I have Windows 1 on my Dell Inspiron 11 3000 series. A few days ago I took a quiz for one of my online classes and have to use Respondus Lock Down Browser, which I have not had any problems with in the past. However, after I X'ed out of my start bar at the bottom disappeared so I had to restart it. Well once I did and got the bar back when I go to click the power symbol to select shut down only a blank box shows up. I was hoping it'd go back to normal but it hasn't. So in order to select shut down I have to click Ctrl Alt Delete and click the power button option at the bottom left there in order to see the Shut Down, Sleep and Hibernate options.
I installed windows 10 about a week ago and all was working fine until I decided to try sleep mode a couple of days ago. I activated sleep mode but noticed after powering off that my PC was turning back on for a few seconds before powering back off in a loop. I didn't think to much of it and powered it off at the wall thinking that would clear any sleep errors. Well I've come back to use it after a couple days and it's still is stuck in a power loop of starting for 3 or 4 seconds before powering back off again in a continuous loop!
No chance to go into the bios, no sign of windows, just an endless power cycle!
In W10 when I leave my laptop in sleep mode overnight, it uses about 10% of battery life. In windows 7 it was way less, to the point that it wasn't even noticeable.
When I walk away from my computer, I want it to go to sleep in 20 minutes. Sometimes I return after an hour, and the computer is still awake. There's obviously a rat in the woodpile here. Some software is changing my sleep setting from 20 minutes to "Never" without my permission. Sometimes it will sleep normally for a day or 2, then suddenly something resets my sleep time to "Never".
Is there a way I can block this activity, or re-set it to the proper 20 minute setting on each startup?BTW, I had the same problem in WIn7 and Win8. I was hoping it would be fixed in Win10. It has not.
Updated my wife's laptop with windows 10 and now is missing the battery meter (charging, power left also no warning on screen when low power) going to the notification area properties the option to turn power icon is completely greyed out and unselectable. Fully up to date and have ran a sweep for errors with SFC/scannow and returned no errors.
This only occurs after the PC goes to sleep and is woken back up again, no issues at any other time.
The PC was upgraded from win 7 home to 10 a week or 2 ago.
I have tried updating windows (had to do 2 updates manually, it wouldn't install them!), checked for any driver errors in device manager and system information but no luck
In the last two weeks I have been experiencing something very strange with my Windows 10 Pro. When my laptop resumes from sleep the Wireless is turned off in Windows. I don't believe it was an update because I have defer updates enabled. Unfortunately, I just noticed System Restore was turned off.
1) I have checked the power settings in Device Manager and the device is NOT checked to use power management)
2) I have updated to the latest wireless driver available.
Edit: I believe this issue has something specifically to do with Sleep because when I reboot or shutdown/power-on the Wireless is enabled and working fine. It only seems to be when Windows goes into sleep mode.
Ever since updating to Windows 10 I have periodically had a problem with my computer when I wake it from sleep. The symptoms of this are as follows:
The machine will wake from sleep fine and I'm able to put in my password etc. After 30s to a minute, the machine will give me a BSOD citing Driver_Power_State_Failure (occasionally it has been something else but this is the main culprit.) It then collects data cycling up to 100% but does not reboot automatically. I need to do this manually. When I do so, the machine will reboot normally.On a couple of occasions in the last month, the machine will simply not wake from sleep at all and neither does it respond when I press the power or reset buttons. The only way I can get it to start again is by manually turning off the power supply and then turning it on again. I am not sure if this is related to the BSOD issue or whether it is a separate issue.I have previously had an issue where the machine would appear to wake from sleep but the screen would remain dead and the keyboard was unresponsive (though the num lock light was showing.) I can't recall having this issue recently and am unsure whether this is a separate issue.It normally seems to occur after the machine has been asleep (hybrid sleep) for some time.Of late I've noticed that it often seems to coincide with me opening a new program or file immediately after waking the machine from sleep.
I have tried several things to fix the issue as follows:
I've tried to run Driver Verifier but have never managed to get the machine to start up successfully even with only one driver selected. (In fact I have to manually import the original registry settings to turn off Driver Verifier again in order to get my machine going again.)I have uninstalled and unplugged a USB video capture device but that has made no difference.I have completely uninstalled the drivers for my graphics card and then reinstalled using Microsoft's default drivers. No difference. I've made sure that I am running the latest drivers, have checked Windows update etc.
It's tricky to pin things down to a particular driver without using Driver Verifier and I'm not sure how to decipher the dump files and error logs generated each time this happens.
Ok, I have read several people having problems with the sleep/power save modes.
I have a similar problem. I can't keep my screen from going blank. Now what I have done is I went into the power save and sleep modes and had everything set to "never" including "none" on screensaver. Well in 5 minutes the screen goes blank but the computer, drive and my previous items & webpages are right where I left them. I also tried setting the time the display goes to sleep for 30 minutes and it stills goes into blank mode in 5 minutes. My assumption is, no matter what I set the power/save and screensaver to it still goes into a 5 min no activity screen blank.
Computer is a HP ENVY dv7, AMD A10,Quad core with 16Gb mem; 650Gb drive. Previous OS Windows 8.1. All drivers were updated to latest before update to Windows 10.
Just installed my Win 10 from Microsoft. All went well on the Venue 8 pro. Win 10 worked well with the Dell VN8P but if you put it to sleep by pressing the power button or it enters sleep itself after the time you set, it WILL NOT start back up when you press the power button. LED back light on but screen remains black.
You need to hold down the power button > 10 sec to shut down completely. The you can reboot and all works fine.
This was unacceptable for my use so for now I back out of Win 10 to Win 8.1 which works fine. Tried all kinds of Windows power settings and options. Nothing works.
