Networking :: Can Only Connect To Network Share Using IPaddress
Oct 12, 2015
I have 2 new PC's set up and running, connected to a NAS via a Switch. Internet is available via a router.
I need to be able to access folders on and from both machines. I have shared C: on both, given permissions on both (everyone = Full control)
I can see the relevant machines in the network section of Windows Explorer (master & backoffice). Sometimes I can see C: on the other machine but I can not connect to it. If I Double click I get "path not found" error ( 80070035 I think )..... masterc
If I type in using the IPaddress it connects and works fine.... 192.168.1.69c
It seems that once I've used the IPaddress method, it can sometimes use the name method ( But this is hit and miss )
Using Windows 10 I have tried several times, but I'm unable to recover my network or shared drives passwords. How can I delete the need for the password, or how can I recover or reset the password?
Today, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond DHCP server did not issue an IP addressStored password incorrect; enter new password: _________ WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
My problem is when I typically save or open a file with the Windows file dialog on any Windows 10 machine, and I try to go to that machine through the network path //MyNAS/MyFiles, it initially gives me a cannot connect or find error.Is this due to the dialog not waking up the drives on the NAS? Something is obviously asleep here, and I usually end up opening Total Commander or Windows Explorer to "wake up" the connection and then everything works. I don't mind waiting, but I'd like the dialogs to hold tight until it connects, not give me not found or cannot connect.
it was working back on 10049 and then i updated to 10051 and it still was working fine. but recently i did a fresh install and now i can re add a network device
i have a "New" Nintendo 3ds and i cant setup the MicroSD management which requires you to add it as a network drive
like N3DS
in the network tab i can see it but when i click it it says
windows cannot access N3DS
error code 0x80070035 the network path was not found upon clicking troubleshooting the problem says the remote device or resource wont accept the connection..
I have just bought a new windows 10 machine. It finds my home WIFI but fails to connect with the message "Can't connect to this network".
I have tried all the obvious issues such as re-booting (every component). I have several windows 7 machines and have checked the configuration of the wireless adaptors and there is nothing different around security, or 802 protocol selected etc. I have tuned off IP version 6 after reading some forums but get the same error.
My router is provided is provided by SKY is:
Manufacturer Sagemcom Model Number F@ST2304 Firmware Version 7.16a4N ADSL Firmware Version A2pD038m.d24h
Whenever I try to connect I get the following router system log:
My first experience with Windows 10 has been extremely frustrating and wasted a lot of time. I see that this is also a very common problem. Equally frustrating is the lack of diagnostic from Windows...I appear to have no way of knowing why the connection failed (hence why I have shown the router log).
My aunt did the free Windows 10 update from Windows 7. After the update she had no internet connection so she decided to roll back to Windows 7. After the roll back, she still has no connection. Her connection icon says "unidentified network" and will not connect to the internet. It is plugged directly into the modem.
I'm running WiFi on my desktop since a couple of months but tonight(since 2 days ago) I suddenly "can't connect to this network". I live in an apartment building for students and we share a Wi-Fi connection in the house. I've asked my neighbor and her connection works.
My smartphone can connect to the network as usual, my chromecast can connect but not my PC.
I run win 10 and use an ASUS PCE-AC68 network card.
ATM I'm connected to my smartphone hotspot so it seems like there's nothing physically wrong with my equipment.
Smartphone connected to the wifi network
Full signal can't connect!?
Desktop can't connect
I think I've tried all the obvious stuff. Checking for new drivers for my ASUS card, firewall is completely off, telling Win 10 to forget the connection and rebooting, waiting... I just get that annoying message "can't connect to this network" "close"...
Here is a wireless network report(netsh wlan show wlanreport) ....
I recently upgraded one of my laptops from Win7 Pro to Win10 Pro. Ever since then it has been taking a much longer time for the laptop to connect to either of my home networks (two different homes). This is with either WiFi or Ethernet.
When it was running Win7 it would connect to either home's network in a few seconds. Now it usually takes over a minute, as much as two minutes. Once it does connect everything works fine.
Product Name: Hp Omen 15 Operating System: Microsoft Windows 10 (64-bit) Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
I have a Windows 7 ultimate pc and I 2 tb hdd I'm trying to share with the network. I have it share by right clicking it and going to properties, sharing, advanced sharing and sharing it that way.
I also set the permissions to everyone with full access and owner to everyone full access. But when I go to my windows 10 pc I can see it so I click on it and go to it but when I try and paste files into it I get an error saying you need permission.
Why I would get this when everyone should have access.
Almost everything time I try to access my htpc that has shares I get this error. I just keep clicking the folder and it will finally let me in. The PC is up and running so not sure why this does this almost everything I try to access the share.
My PC is windows 10 pro the HTPC is win7 ultimate.
I had Windows 7 on the main computer at home. The printer was attached to that computer, with sharing turned on. Other computers in the house, some upgraded to Windows 10 and some not, could all use the printer. Now i have upgraded that desktop to Windows 10, and no one else can print to the printer.
I have a new Windows 10 system (A) which has a printer attached. I'm trying to share the printer with another computer (B) also running windows 10, both computers can see each other on the network but when B tries to look at A it gets a message that it can't access A.The printer is shared and as a far as I can see file and printer sharing is enabled but the add printer routine can't find it.
I can see A and it's shares on a W7 computer (C) on the same network without problem and it has detected and can use the printer.All computers are in the same Workgroup and both W10 machines (A+B) are in the same Homegroup.B was able to use the printer when it was attached to D, unfortunately D is now dead and replaced by A.
PC is a brand new tower running Windows 10 & I love it but I cant seem to get my Mac laptop to connect to the Kodak c310 AIO printer when I hook it up to the new tower. It connects to my old Mac Pro tower easily over the same LAN.
The LAN is an ether-net using a Linksys 4 port router. The Mac identifies the tower as being on the network and seems to try to print to the Kodak but then just hangs at sending the data. As I said above, it prints fine over the same network to my old Mac tower.
I have followed all the steps here: [URL] ....
Enabled LPD protocol & printer sharing in Windows 10.
My office LAN is p-p LAN, every time i want to use the printer connected other PC on LAN, i must enter credentials to connect, how to disable it? Both 2 PCs are Windows 10 Pro, turned off password protected sharing and turned on file and printer sharing.
Drive C: on a new win10 laptop is marked Shared for Everyone, read+write+control (because it will hold a webserver and database server that must be manageable from other workstations in the workgroup).
Yet win10 refuses access to a map-network-drive request from File Explorer run as administrator on any win7 machine in the same workgroup.
I have two computers both now running Win 10. One is hard wired to my router, and the other is on wireless. I am not using Homegroups....just the old method of work groups, which used to work pretty well. (I also have some XP computers.) The computer on wireless can see the C drive on the hard wired computer, but not vice versa. I shows the C drive but when I click on it says it can't be accessed. I have set all the permissions for the C drive on that machine, giving full access to "everyone". I went to the Security tab and set the parameters to allow access for authenticated users. (When it runs through the files it frequently hangs with an error message, but continues when I hit return.)
I have two windows 10 pro computers. first computer has a folder on the root of the C drive that i want to access from the second computer- both on the same wifi network, same workgroup, set to private network in windows- no homegroups set up.
I can enable sharing of the folder, but i can't select the user account from the second computer that i want to have access to the folder- when i try to select the user account (from the second computer), i can only see the local computer accounts- how do i set access for a specific user account on the second computer?
I'm pretty sure i remember this being more easily done back on windows 7, but honestly it's been awhile since i've needed to set up folder shares.
I need to share a window on my Windows 10 PC via VNC (to an Android device). UltraVNC says it can share a single window, but I can't get their VNC server to do this, only the entire Desktop.
