Brought a new Dell laptop and came with windows 10 and i can't get it to connect to wifi. It worked perfectly at my mums, but at home it says wifi password incorrect when its not. I have updated drivers, disabled and enabled the wireless adapter. In command prompt i type ipconfig/renew it says no operation can be performed.
I have an odd issue with my laptop since upgrading to Windows 10. The first time I boot I cannot connect to my home Wifi, however when I reboot I can. It is always the same every time I switch it on in that it will only connect on the second boot.
Upon upgrading to W10 my laptops wireless was given an update from windows update which added new drivers for the wireless card.
Since this update my on-board WI-Fi is no longer functioning. The adapter is there, but it says there are no networks available. If i go to the wireless setting and attempt to click Wi-Fi to on it just flickers back and remains off.
The wireless adapter is now showing as "intel centrino wireless-N 1030" and it shows several other bluetooth devices which were not present before the update. The driver update seems to have introduced some new bluetooth functionality but the result is that it has disabled my Wi-Fi.
I have a laptop with Windows 10, and it has been working fine for months. Yesterday I thought I had a connection issue with the Internet, and set the computer aside until it was resolved. Later I checked my phone, and saw that the WiFi is actually working just fine. I have restarted and reset and tried to connect to Hotspots and all sorts of netsh commands.
So yesterday my wi-fi started to turn off randomly for no reason, its not my internet connection becouse it works on other devices. Also i already tried ticking off power saving option on my network adapter, it worked for a while i thought, but after i restarted my laptop even though its still ticked off, its still turning off randomly.. (Also i noticed it turns off when i plug or unplug my mouse?)
Other problems i have:
1. Cant set opera as my default browser it asks me if i want to set it as default every time i open it and i always click yes..
2. Cant turn my touchpad off even though when i use fn+f9 it says its turned off..
My laptop is randomly disconnecting from my new router. Sometimes it's every few minutes, sometimes it can be an hour or two in between disconnections. This only seems to effect wireless devices and I notice it most often on my laptop. The router is a Fritz!Box 7490 and is connected to 2degrees Internet. The message in the WLAN event log is :
Wireless LAN device deregistered itself (5 GHz). MAC address: 64:BC:0C:6A:79:62 The weird thing is that if I disconnect from wifi and reconnect it re-establishes the connection near instantly. Sometimes it just shows as connected to wifi but not to the internet.
I have tried factory resetting the router and I've tried setting my laptop DNS settings to 18.104.22.168 and 22.214.171.124. I have also tried to change the wifi channels in case of interference.
After updating from windows 7 to 10 I faced a problem, my laptop's wifi does not auto connect when i turn it on, instead i have to reset my wifi adapter to connect to my wifi, this was not an issue on windows 7. My drivers are all up to date i even tried to reinstall them but still no result. It feels annoying to reset my adapter all the time when i turn on my laptop
I have my laptop at work and have had no trouble connecting the company WiFi (they have Guest WiFi and a WiFi where you need to enter your company provided Username and Password). I have been connecting using my Username and password. Today I had to change my company login password. Now when I try to connect my laptop I get a "can't connect" message because the password saved in my laptop is no longer valid. But I can't find a place in Win10 to enter my new password.
I remember the first time I logged onto the company WiFi a Windows popup came up asking for my Username and Password (which was saved so I didn't need to enter it again - until now). This time not getting the popup - it just says "can't connect".
Running Windows 10 on a Dell Latitutde I was trying to setup a Netgear Wifi Extender because the Fios Router does not reach all the way to the other side of the house. I did the setup (so I thought) the way the manual told me and my computer was trying to connect to the extender, but it just stayed in "Connecting..." For a long long time. Eventually I gave up and thought I'd hit the reset button on the extender and try again.
Now my wifi adapter finds NO networks. All my other devices see all the networks.
The only other time this has ever happened I had accidentally hit the network adapter switch on the side of the PC, so I'm 100% sure that's not the problem and that it is 'on' in the settings. I've tried restarting the pc several times as well as toggling the adapter on/off, airplane mode on/off, and the switch on the PC on/off.. And it still sees no networks..
I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:
Made computer boot in safe mode with networking.
After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on.
Both the Windows 10 laptop and the Windows Vista laptop have discovery on and file and printer sharing on. The printer is connected to the Windows Vista laptop. The Windows Vista laptop can see the files within the Windows 10 laptop. The Windows 10 laptop can see the Windows Vista computer but as soon as it tries to see inside it gives an error about "spelling of the name, etc." If using the diagnosis tool it says "One or more network protocols are missing from this computer". "Resolving problems as administrator" does not solve anything.
I have a laptop running Windows 7 that is connected to a printer. I am connected to the internet using a WiFi connection. I have a homegroup called workgroup. My wife has a laptop running Windows 7, connects to the internet using the same WiFi modem and prints using the printer on my laptop.
I downloaded Windows 10 on to my Windows 7 laptop and all of a sudden my wife can't print anymore. Microsoft, you've done it again. How I hate this!
I fooled around with HomeGroup settings on the Windows 10 laptop and the system attributes on my wife's laptop and now I can see her computer on my Windows 10 system. But I cannot see the printer on my system from her laptop.
I tried to click on my compueter from her laptop and I get a request for username and password. I don't know what username and password to use. I gather from reading the forum that I should put the name of my laptop in the username but I don't know where to look for the password.
I'm using a HP r046tu laptop windows 10 which I've updated it. So my is when every time I'm going to boot my laptop to use it. My Wi-Fi connection is too low and it doesn't suggest any available routers in my house. I've updated all my drivers a prior to the Windows 10 update
My laptop is Dell Inspiron 3148 2 in 1 with Windows 10 Home. I cannot convert my laptop as Wifi Hotspot. It is showing me "Please install Microsoft Virtual Wifi Adapter". But I am not finding this software anywhere.
Ever since i updated my windows 7 to windows 10, i am unable to use any of mobile's Wifi-hotspot to use internet on my laptop which i used to do earlier hassle-free.
Now whenever i try to connect my laptop to a wifi-hotspot of any of my mobile phones the laptop seems to connect with it and also shows 'Internet Access' sometimes (or Limited Access most of the times) but when i try to open any of the websites it doesn't open.
How do i connect my laptop (Win10) to a portable WiFi-Hotspot?
I recently updated my HP ENVY laptop from Windows 8.1 to Windows 10 & immediately started having issues with my WIFI speed. I was able to connect to the wireless network just fine with no limited connectivity, etc but the speed crawls. It's only my laptop...all other wifi devices are running with no noticeable difference. I went through a bunch of troubleshooting steps and couldn't get it to improve.
I was able to figure out my wifi speed is great when my laptop is connected to ac power, but immediately drops speed when unplugged. All of my initial troubleshooting was on battery power.
I checked the driver Power Management tab and unchecked the Allow the computer.... option. Also Control Panel-Power Options and changed the Wireless Adapter Settings to be on Maximum Performance for both On Battery & Plugged In.
Realtek RTL8188EE 802.11 bgn Wi-Fi Adapter with updated driver.
I have internet service from AT&T which worked great until I updated to windows 10. My pc now connects to the wifi just find, I can download updates, but I can not browse a web page. When I go into open a web page I get an error that the page can not be displayed. If I vpn to my work it works just fine then. I have reset the browser settings, created a new account on my pc and nothing has worked.
I have no wifi after upgrading to Windows 10 from Windows 7. Looking at Device Manager, I believe my Network Adapter is Intel(R) 82578DC Gigabit Network Connection. Looking online, I do not find a driver for Windows 10.
i have tried connecting to my school's apartment however it always goes to no connections are available and then airplane mode and shows connections are available. the Wi-Fi connects just fine in all other areas of the school byt not in my apartment. The apartment is located inside the school and there are a couple of access points. I can connect to my friends Wii-U just fine but not my laptop? And when I troubleshoot, it says "Problem with router or access point.
I've installed windows 10, but I've got a strange problem. My WiFi connection randomly gets limited for one second. It isn't so bad, when I'm browsing, but if I wanna download something... that's terrible :S 'cause when the wifi stops, the download stops too... What can I do? I think it's not my laptops problem, because before win10 - on windows 8.1 - it worked fine. If it matters something, it gets limited in about every 5 or 10 minutes.
I was wondering if it's possible to utilize both WiFi and ethernet in tandem. I'm pretty sure some of you are going to tell me that I can only access the internet through one of these, up to my bandwidth limit, but that's not what I mean.
I'd like to access the internet through my WiFi connection, yet have a wired connection through my router to access the files on the other computers in my house.