Networking :: No Internet Connection Before Log On
Nov 8, 2015
Since I downloaded windows 10 I keep getting no internet connection before I log on. I called my internet provider and she had me checking a lot of things before she had me to type Device Manager in my search bar and look under networking to see if anything was off. Both my Ralink RT 3290 802.11 bgn Wifi Adapter and my Realtek PCle GBE Famili Controller had a yellow triangle with an exclamation mark in the middle beside them. She had me to right click on them to disable them, then go back and right click again to enable them. My internet connection came back but it keeps losing connection about once a week. I didn't have this problem before the download. This is a HP Desktop and I am connected wireless.
But I'm currently browsing the internet and typing to you.
In fact - I can do virtually everything (League; Steam; Skype; etc) except use any OS feature that requires logging in - e.g. Mail, User Accounts, Shop, etc. Then it says something along the lines of "Cannot use this service without an internet connection - please connect and try again." When I run Network Diagnostics as the prompt recommends - it says I am connected and cannot find a problem.
It doesn't always happen - but it seems to be determined on start-up. If I restart it now it might be working next launch - but 75% of the time it will encounter the same issue. It's been happening for months now but I've sort of gotten used to using my phone to check my emails - but I've now encountered an issue with one of my hard drives being unable to be searched (tried indexing, etc) and the only step I've found that I haven't tried says it could be a corrupted user account - but I cannot update my user account without "connecting to the internet". -_-
The system is up to date. No driver updates available.
I upgraded my ageing Dell Inspiron 530 desktop PC this morning from Win7 Ultimate to Win10 Pro. The PC is connected to the router via ethernet cable.All seems fine in terms of the OS, but I have no internet access. I know the router's OK as my other devices are fine.When I run the troubleshooter it flags up "There may be a problem with the driver for the Local Area Adapter".Digging further, it seems the issue is "Windows couldn't automatically bind the IP protocol stack to the network adapter"
Looking at Services, I found the Wired AutoConfig and WLAN AutoConfig services weren't running were set to Manual. I changed these to Automatic and rebooted, but still no joy.The network adapter is an Intel 82652V-2 10/100 and Device Manager says it's working normally and the driver is up to date.
So, my wireless router went out on me yesterday during a thunderstorm, which I replaced today. My desktop will not connect to the wireless network at all. I have it connected right now, through my cellphone's hot spot. Also, I can connect my phone to the wireless network as well as a different desktop and get internet access, which suggests something wrong with this desktop, I would imagine.
ASUS PCE-N10 11n Wireless LAN PCI-E Card Broadcom NetLink (TM) Gigabit Ethernet
I'm sure some additional information may be needed but I'm not sure what you would need, so I'll gladly provide what I can if needed.
I've been running Windows 10 on my PC for a few months now. I upgraded from Windows 7 and absolutely love it! However, I am having an issue. When I use my PC on a normal basis, Everything is good. Internet connection is perfectly stable, no problems. But ALWAYS if I restart my pc, and SOMETIMES when I put it to sleep, when my computer turns back on, my internet connection can't be detected. I have to unplug it for about 5-10 seconds and do a full reboot in order for my internet connection to be detected by my pc. None of my other devices have this issue. I have an xbox one, Smart tv, my phone, laptops, etc. connected and none of them have the same issue.
Why do I constatnly lose my internet connection since upgrading to Windows 10? Did not have this problem with Windows 7 and Century Link. Once it is gone, cannot get it to reconnect. Keep getting a reset error message each time when running the diagnostics. If I can't resolve this soon, will be going back to Windows 7!!
I had windows 10, free download, on 25 of August, upgrade from windows 8, and the internet connection was fine till about 10 days ago. Trouble shouting result.."Ethernet does not have a valid IP configuration" . Contacted my provider Talktalk, was sent latest router, can connect with mobile wireless to router, can connect with laptop (Windows 7) hard wired, cannot connect with my desktop (hard wired) on which windows 10 is down loaded.
Have checked cable to desktop by using cable with laptop.
What do I need to do to get connected to the internet with my desktop?
Clean W10pro installation from scratch. No upgrade. Quad Core intel @ 3.??ghz with 4GB on an intel board. Basic workhorse machine. Windows is up to date and nothing else has been installed to the machine. No changes to OS from defaults upon installation. Device Manager shows all attached devices are working properly. USB Wireless card connects to the access point just fine.
ICS is enabled on this adapter and shows as "shared". Ethernet adapter is auto-configured by ICS (IP and SUBNET). This adapter displays as "Unidentified Network" with or without cable connected. Under Status/Details: NO gateway. NO DNS servers.
Client Computer: same basic machine as above. Everything updated and functional.Ethernet adapter wired with standard ethernet cable to Host. (All this gear is modern and will not require hardline crossover)Ethernet adapter is set to obtain IP/DNS automatically.Under Status/Detail IP Address is 192.168.137.124 (DNS is working properly)Ping 192.168.137.1 successful without errors.
I disabled the firewalls. No improvement. Reset everything to defaults. Tried a "Bridged Connection" same "No Internet Access" results. In the end everything works except no internet access across the two adapters in the Host machine and there should be.
Today, when i opened my PC i found out that i have "No internet connection". The last time i used it was last night, and it worked like a charm. The problem is from the software itself I guess because other devices seem to be working fine connected to the internet. This also happened to me while using windows 8.1 but I got it fixed everytime with a simple "netsh" command. Now things aren't this simple, i tried multiple fixes and none of them worked. I tried to update the driver from the device manager but i can't find the microsoft and the producer driver, instead i find some outdated drives from like 2013.
If I go to the network and sharing center on one of the computers on our home network it reports that it is not connected to a network, but this system can see other computers on the network and access the internet. The other computers cannot see this system, however. This system has an older X38 motherboard with an E8400 processor, but the initial in-place upgrade from Windows 7 had no problems at all.
I didn't notice the problem until I realized that about two weeks of backups across the network had failed. I have tried the repair tools in Windows 10 and have uninstalled and reinstalled the network adapter without success. I was hoping that the problem would be fixed by installing the recent big windows update, but windows update reports that it cannot connect even though I have internet access.
I upgraded to Win10 yesterday. upgrade could be a keyword for the future but since I upgraded everything has been perfect except my connection to the Internet. It's fine on startup but once I go on Edge, Chrome, steam or Skype it stops about 3 minutes in when using them. It doesn't come back unless I restart.
I'm using a Ethernet connect. All wireless devices are working fine, My LAN adapter is a Broadcom Netlink Gigabyte Ethernet. Turning router off and on again doesn't work. All drivers are up to date, apparently. No vpn.
I removed my McAfee to see if that changed anything but still no luck.
I don't know what to do now because this goes beyond my knowledge of windows 10 and computers.
My PC is over 5 years old, maybe that's a factor but it still surpassed all the requirements to run Windows 10
This brings me back to Upgrading and not full fresh install. I've too many family photos and other valuable projects. I dont have an external hard drive either, which I need soon as my current one is getting louder, but that's not the issue here. I just want to get on the Internet and enjoy my 120mb Internet speed!
Win10, diagnostic message is:"one or more protocols is missing".Running diagnostic as Administrator message is:" connection between access point, router or cable modem and Internet is broken".Have tried winsock reset, clean reboot neither solved the problem.What does ISO stand for. P
issue of no internet connection after update to 10130? The motherboard is using Realtek Gigabit Ethernet. A check indicated there is driver issue which block connection to my Linksys EA9200 router. There is no issue with the previous build.
My laptop is for some unknown reason not connecting to the internet via wifi or ethernet. It will also not diagnose the problem as it says The Diagnostics Policy Service is not running and it cannot fix it.
I am connected to the internet, but in the toolbar it says Not Connected and Connections are available.
I am referring this to the Wifi Icon on the Bottom Right Corner near the Clock (Notification Area). There is no yellow asterix and I am properly connected to the internet. When I click this Wifi Icon , a window pops up and on its top it shows my ssid and below it shows connected.
Disconnect option is also here.
I have already changed my Wifi adapter - previously it was Wayona and now I am using Prolink. Both works well.
My HP laptop keeps wanting to start in the airplane mode. I have reset it to the normal WIFI mode many times and it keeps going back to Airplane mode. I have contacted HP support twice. They took control of the computer and did there thing twice. Ptoblems is again occuring.
After the free upgrade all worked properly, then i did a clean install (format) with a bootable usb that i made from media center. 6 days now no Internet connection, no wifi option. I think its the common problem with Wifi on Wos 10. As you realize i have only the windows files in my hard drive, the driver for my wireless adapter (Airties 2410) and the intel management center driver. I tried everything from the many possible solutions but not luck for me, even installing older drivers for my wireless adapter.
I have suddenly noticed a problem with internet connection. I cannot download any apps from Microsoft store (with unknown error message). Strange is that each other software (cloud clients, browser, ....) works perfectly.
I have already searched for solution on google and found command wsreset.exe but this did not work..
I have also tried network troubleshooter. It has found these errors:There is one or more missing network protocols. Windows sockets registry entries are missing
I have tried to repair these errors with some netsh commands, which actually did something but did not solve anything.
Another solution is to reinstall network drivers but this did not work either.
version 11099 6a bit Pro Firefox Avast premium Router Asus AC1900 Please note system specs are for another computer.
Firefox is running at it's normal speed but when I try to connect to ANY website it seems to take forever to connect. My wife's laptop running the normal release of 10 has same problem. Have tried everything i can think of but no success.
Roughly half the time I restart my PC I am told I am not connected to the internet, the Ethernet icon in the notification area shows a yellow triangle. but the thing is I am connected just fine and can access everything I normally do. Even microsoft.com. So this shouldn't be a problem if I can access all my stuff right? See things like Office and Skype use whatever detection method that is failing to determine if things can be sync'ed. The only answer I have is to reboot until the little yellow triangle goes away. There has to be a better way.
I did my upgrade quite shortly ago.Basically before that upgrade I had 2 connections at the same time: Local Area Connection with Ethernet and my PPPOE connection as advised by my provider.I've been using my PPPOE connection for years to sidestep some connection issues especially with uPnP, but now my internet only works through Ethernet and when I also start in my dial-up section the PPPOE connection, Windows 10 reports the "no internet connection" problem.After using "Troubleshoot problems" it resets the required parts and reports solving "Gateway is not available" problem.
1)I've already tried to reinstall all network drivers by deleting them first with device manager and through netcfg d in command line. 2)I don't know if it works but my BitDefender reports new adapters upon starting PPPOE: Teredo Tunneling and 6to4 3)I already tried to set Local Area Connection to Home and my other connection to Public and also all other possible permutations of settings
Working on desktop Lenova computer. I was updating the computer drivers when one of the drivers froze, I click on cancel. I tried the internet and it stated No Internet Connection. I went into Device manager and did the unthinkable. I deleted everything inside the Network Adapters, including the words Network Adapters. In other words, no Network Adapters are showing in Device Manager.
First, I would like to know how can I replace the words Network Adapters in the Device Manager menu, and download the two adapters that were there in the beginning. Lastly, how to get back the Internet to work again.
We use a lot of VPN PPTP Connections. On most we turn off "Use default gateway on remote network". See the image below that shows where this setting is turned off.
We cannot open the properties for Internet Protocol Version 4 on VPN connections under Windows 10. This is located at Network Connections and Properties of a VPN Connection. Networking Tab, then select Internet Protocol Version 4 and click Properties. But under Win 10 the properties dialog does not open.
This has been tested on several Windows 10 systems and we have enabled Administrator and tested under that login as well.
I am having a big problem with my internet connection going down since I upgraded to Windows 10. It went down 4 times in the last hour and having to reboot to get it back is not the solution. Device Manager shows I have a Broadcom Netlink (TM) Gigabit Ethernet adapter. I have tried using the software update link for the adapter and it says I have the latest software but I am not sure if that is correct and I don't have a clue what driver I would need to update the adapter. When my internet connection goes down my WIFI connection is fine and I can connect to the internet with my mobile devices. My current driver according to device manager is 22.214.171.124