I just upgraded from Windows 8.1 to 10 and having this annoying issue where the yellow triangle over the ethernet icon in the taskbar will not go away. I can get online and surf so not sure whats going on. I did install the new lan drivers but still getting the annoying yellow triangle .
View 9 RepliesI have several computers, one laptop recently has a new problem. The internet network connection in the corner has a tiny yellow triangle and says the connection is limited and says it is NOT connected to the internet - even though it IS connected to the internet. It does this for both the wireless icon and the ethernet icon, so it can't be a driver issue.
I have rolled back the drivers, gone to the HP support site to get their drivers, updated to the latest drivers, and nothing gets rid of those triangles.
It's also not a router issue, because I have another computer on the same router with no problem on either the wifi or ethernet. I've done sfc /scannow in both safe mode and normal mode. I've looked for any errors and there are none. It is very annoying.
Last night I bit the bullet again & upgraded to windows 10 & then did a clean install. I have noticed that the network icon in the system tray shows a yellow triangle & says no access but I can surf fine with chrome & use qbitorrent etc.
The only way I can get rid of the yellow triangle is to disable the network adapter & then re enable it.
Not using any third party firewall as private fireall doesn't support windows 10.
Basically, last week I bought this laptop And I started off working fine until a few days ago when my internet went off. The wifi logo has a little yellow triangle warning sign next to it and it says Limited. I started off by resetting my wifi but that didn't work then I tried connecting to my iPhone hotspot and that didn't work either and was also saying Limited!! It's obviously not the wifi but the laptop that is the problem. How can I fix this?
View 9 RepliesI'm on Windows 10 x64 and my network device is a Intel GbE LAN chip (10/100/1000 Mbit).
My issue is : I have a yellow triangle over the network icon in the notification area and it says me "Network : No Internet" even if i can access to internet and my network works perfectly.
That's not very serious issue but that's disturbing to know if i'm connected or not (real disconnections can happen). After trying to reboot my rooter and uninstalling/reinstalling Intel's newest drivers i don't know what to do.
One of my PC's aren't connecting to the internet. It's running Windows 10. And it shows a yellow triangle and says 'no internet' if I click it.
View 1 RepliesNetwork and Sharing is the only plce I can see the list of detected networks. How do I get the the icon on the taskbar?
View 7 RepliesFor those looking, the solution is here: Remove yellow/blue shield icon from shortcuts
After upgrading from windows 7, some of my desktop shortcuts have this shield icon graffiti sullying their lovely visages. Can I remove these somehow?
After I updated to the latest Windows 10 "upgrade" (Build 1511, 10586) released yesterday thru Windows Update, my system shows only the Wi-Fi icon on Taskbar instead of the Ethernet Network icon which it used to display earlier. I have a wired broadband connection, and keep my Wi-Fi Adapter settings "Disabled". Yet, the icon shows the Aeroplane mode of Wi-Fi icon on Taskbar, instead of the Network icon it used to display before this update. At times my wired BB connection tends to become unstable, so I need to keep track if the connection is down, before I do some critical activity on Internet, like large download (which I may be unable to Resume), or Netbanking or online shopping, etc. How do I get the Network icon instead of the Wi-Fi icon on the Taskbar in the new Build 1511 ?
View 9 RepliesI am unable to access the windows store but i can connect to the internet with nearly everything else...
Not a massive issue as I don't use the store much but it is quite annoying as it only happens sometimes.
I believe all my drivers are up to date... the MOBO is a asus b85m-itx..
Currently, my OneDrive icon is sitting in the 'hidden icons' section. I have seen pictures of the icon sitting on the taskbar next to Edge, the store, and all the other taskbar icons... how do you get that icon on the taskbar? I have tried all the normal ways I can think of (click and drag onto taskbar, going into taskbar settings, etc) but I can't get it to be removed from the hidden icons area.
View 2 Repliesi recently updated to windows 10. I'm having some difficulties regarding internet through Ethernet on It. what usually happens is i am able to surf the Ethernet for around 10 minutes, then the ethernet adapter just quits on me. So i run the network trouble shooter and find you that it needs to reset the DNS, which it does successfully. After that my Ethernet doesn't work anymore till I restart the Laptop. my computer's wifi card is an intel wireless n 7260, and the other network adapter is a pcie gbe family controller.
View 2 RepliesSo i recently updated to windows 10, and i noticed i wasn't connected to my Ethernet anymore, so i had to connect my PC to the wifi. Under my "network Adapters" it only shows "Qualcomm Atheros 802.11 1/b/g/n" I tried connecting another ethernet cable, but nothing happened.
View 1 RepliesI cannot seem to connect on Ethernet though Wi-Fi works OK. I have seen several articles about ethernet problems with Win10.
CABLING
First the network config:
Two notebooks, C and D are plugged into a switch and the switch plugged into the router. Now, the cabling is verified to work because computer C, running Win7 connects just fine and if the internet cables are swapped, computer C still connects just fine.
Computer D however does not connect. I did some other things to redundantly check too, just FYI.
So cabling looks OK.
ROUTER
both computers have fixed (reserved) IP addresses in the router.
The router sees computer C
but not computer D
Just FYI, if I turn on Wi-Fi, the router sees D on WiFi, but not the ethernet.
PING
Computer C can ping D
Computer D can ping C
Computer C can ping the router
Computer D cannot ping the router
Some investigation suggested the following, all of which I tried with no better results:
- Update the network adapter drivers (already current)
- Winsock posible culprit, so NETSH WINSOCK RESET and reboot - no change
IE used to find and fix these things pretty well, but here we have EDGE. Perhaps I'll try to install IE. Connectivity diagnostics are where IE shined over Chrome and Mozilla.
UPDATE: IE 9, 10, etc. are not compatible with Windows 10. So, the connectivity diagnostics just not as good in Win10. I can tell I am getting tired, as it's getting hard not to swear.
UPDATE: Added a pretty picture.
I was wondering if it's possible to utilize both WiFi and ethernet in tandem. I'm pretty sure some of you are going to tell me that I can only access the internet through one of these, up to my bandwidth limit, but that's not what I mean.
I'd like to access the internet through my WiFi connection, yet have a wired connection through my router to access the files on the other computers in my house.
I am running Windows 10 demo version. I have problems connecting to the net. I am shown the error along the lines of "Ethernet does not have a valid IP configuration".
From command prompt I run "ipconfig/all" and here is the console's output:
When I run "ipconfig/renew" it fell through : I should add, I have no problems on Windows Vista however.
I ran Windows 8.1 on my desktop machine a few months ago, and later upgraded to Windows 10. Everything worked great at that time, but since have replaced Windows with Linux. Now I'm trying to install Windows again, with the same 8.1 disk that I used for my earlier installation, and my ethernet connection isn't found. (this is a direct wired ethernet, not wireless) I've installed with a local user account, dug into every networking utility in Windows, but whatever I do the internet goes undetected. I've run the ethernet thru different routers, and even circumvented the router all-together, but no luck. Has my 8.1 disk "expired"?
View 3 RepliesI've been having problems with my network drives which seems to have happened after a recent Windows 10 'update'
In device manager I stupidly deleted a number of Windows adaptors under the Gigabit network connection.
Now I just have the Red Cross over the Internet icon.
Ive tried reinstalling Intel drivers but they stop at 'installing network drivers for Intel 82579v Gigabit network connection'
I then get a message 'cannot install drivers - No Intel (R) adaptors are present in this computer'
motherboard is is a Gigabyte X79 UD3 running F20 Bios. The network adaptor is onboard.
I can't seem to figure out why the computer can't detect the adaptor.
There is no ethernet controller in the device manager? And the network and internet page in settings does not give an Ethernet connection option?
i've been with this problem for months and i have tried multiple solutions offered by others on the internet, yet i'll give it another try here.
i'm using a powerline adapter directly plugged into the wall on my desktop. And it has worked excellent before, but suddenly someday it did not get a valid IP adress anymore for my pc, i have tried giving it an ip adress manually but without succes. i also tried updating the driver but there was no update.
my network and sharing center displays unidentified network and windows problem solver detects the problem 'network name' does not have a valid ip configuration.
So I've got a simple question really when a laptop is connected to a WIFI network then a Ethernet connection is plugged in which one will it use as priority?
View 3 RepliesI am completely wiping my hardrive with DBAN and doing a clean install of windows 10 with a dvd I created with the media creation tool. Will the fresh installation of windows come with a driver for ethernet cable so I can get on the internet.
I know I can get the drivers and put them on a usb to use after install, but I'm having trouble with malware on other computer and I don't want to transfer anything.It is windows 10 home on a 64 bit Toshiba Satellite C55-C5241 if that matters.
There is 2 computers and 2 virgin superhubs in the house i live in (not both mine) both ethernet connected. Occasionally i have to unplug my superhub and connect my desktop computer to the Wifi on the other hub which is in the next room.My computer obviously "remembers" the password for the wifi and i used to be able to just unplug my hub and it would automatically connect to the wifi without me having to do anything.
Since switching to Windows 10, when i unplug my hub, it says that it is connected to the wifi however it says "limited" and no websites work, effectively not connected even though it says it is.To solve it i have to leave my hub unplugged and restart my computer and it connects instantly and works. Whilst that isn't a huge problem, i sometimes could do without having to save what i'm doing just to restart the computer as i have never had to do this before.
The same problem also occurs in reserve if you get me. Disconnecting the Wifi and then plugging in the hub, it also says limited connection until i restart the comp. Virgin Media have been of no support whatsoever, to be honest I didn't expect them to be as it seems like a computer/windows problem.
So... I just updated from win 7 to win 10, as I got it for free. All went smoothly, but there was no ethernet connection. I'm running a custom built pc, connected to my router via ethernet cable.
At first windows detected the cable, but said: ''Ethernet doesn't have a valid IP configuration." I was on about around the settings, and deleted the ethernet network from windows' settings. I thought it would come back by just re-plugging the cable. This didn't happen. What happened was, that the whole 'Ethernet' tab disappeared from the 'Network & internet' menu!
I also don't have 'Wi-fi' or 'Airplane mode' tabs in the menu... Well I have a pc that doesn't have support for wifi so that might be why...
how to get win 10 to detect the ethernet cable, and maybe that way bring back the 'ethernet' tab?
Oh, and I tested the ethernet cable on my laptop (running win 7), and it worked fine.
Strange issue that just started today. My Ethernet adapter shows unidentified network and none of my apps have internet access, however my web browsers work just fine. I am even making this post from the adapter that supposedly has no access. I have been searching around for a solution, but no problem seems similar to mine. Check out the screenshot below.
View 1 RepliesMy laptop is for some unknown reason not connecting to the internet via wifi or ethernet. It will also not diagnose the problem as it says The Diagnostics Policy Service is not running and it cannot fix it.
View 4 RepliesI have in the past readily connected two computers directly via an Ethernet crossover cable under Win7 and Win XP but cannot get this to work under Windows 10. No specific messages, just cannot see the alternate device from either notebook. make this happen under Win 10 ?
View 2 Replies