Performance :: System Restore Not Working Properly
Jan 5, 2016
Is it just me, or is System Restore in Win10 wonky? I have it turned on for both my C and D partitions. The other day I needed to go back to a restore point from 3 days before. The operation completed without issue, but then I found I wasn't able to reverse it.
In Win7 before restoring it would automatically create an "unrestore" point so the user would be able to undo the restore operation if they needed to. This isn't happening in Win10. Nor does the system automatically create a restore point before installing or uninstalling a program like Win7 did.
The "Restore Previous Versions" feature is also affected. When I right-click a file and choose "Restore previous versions", the Properties tab comes up instead of the Previous Versions tab. Clicking on the tab it always says there are no previous versions available, even though there should be since there are several restore points. The other day an important file got corrupted and I thought I could restore an earlier version like I always could under Win7 but the tab was empty.
I recently installed an SSD and I found out while running Samsung's OS Optimization disk that it has turned off System Restore by default. I of course can turn it back on, but I wanted to get feedback on turning on System Restore on an solid state drive.
I created a system image on a Seagate external hard drive using Windows 10 Home, and I created a restore disc for booting with an external BUFFALO DVD drive connected to a USB port. I went into the UEFI and set my BUFFALO drive as the first drive to be used for booting at power up or reset. When I restarted the computer, a message appeared saying "Press any key to boot from CD or DVD". I pressed a key. After a few minutes, the following screen appeared:
I used the down-arrow key to select US and hit enter. Then the following screen appeared:
I used the down-arrow key to select "Choose Device" and hit enter. Then the following screen appeared:
This screen gave me only two options: (1) Boot with the BUFFALO optical drive, and (2) Boot with the Solid State Drive which the HP Spectre x360 has (instead of a real hard drive). When I used the down arrow to select the BUFFALO optical drive, the screen that asks for the desired keyboard layout reappeared. When I selected US and hit enter, the screen that asks for a booting option reappeared. When I selected "Choose Device" and hit enter, the screen that gave me the option to boot with either my BUFFALO optical drive or the Solid State Drive reappeared. I found I could keep going around in circles like this, without ever having an opportunity to restore the computer with a system image I had created earlier.
I usually see the restore points created by windows but it isn't everyday backup, so I want to do a daily restore point backups, I went to Task Scheduler >> Windows>>System Restore, there is a task already there, I changed it to be daily at 4am, and It's enabled.
I check everyday in history and I see that the job is successfully done, but if I go to restore points I don't see any of those backups except the ones which Windows creates randomly or after installations.
I understand, that 10 relies on reset/refresh, but disabling SR is a bit drastic. Especially taking into account, how many flaws are in 10 right now, I wonder how it made RTM.
New desktop computer - Windows 10 Home. In System Restore, Configure, the Max Usage slider is all the way to the left.What does that mean?The hard drive is 1 TB, so I'm not concerned about how much it uses.(On my old Windows 7 desktop, I moved the slider to the right and it now saves fewer restore points.)
How to turn system restore on or off. I do Macrium backups frequently and absolutely do not need the system restore turned on. I turn it off and occasionally check back only to find it on again. Not sure what is activating it. I am going to start checking each time I boot the computer up in the mornings to see if it turns on every new boot. Just rebooted my computer and system protection isn't turned on. Wonder if updates or something is making default on or something.
True that if one disables System Restore, then an alternate backup software is needed. Yet, I'm wondering if this is something which you recommend if looking for improving SSD performance (exclude the risk of not having a backup)?
The other bit is, though SSD are faster for boot time, with Win10 it takes about 25 seconds from cold boot to be on desktop. In Win8/8.1, it took me 8 seconds with the same Intel 520 240GB SSD. With Hibernate enabled, the boot is faster than 25 seconds but not 8 seconds.
Since installing Windows 10 I've had a problem with System Restore. As you can see from the attached graphic, I can access the System Restore panel but System Restore for the Windows drive is turned off (orange box) and the means of restoring to an earlier restore point as well as Create are greyed out.
The ONLY thing the window allows me to do is to go to the Configure panel. When I get there I find that System Protection is disabled and I cannot turn it on. However, my system IS using some space (blue box) although I have a sneaky suspicion that has not changed since I installed W10.
My question therefore is really: how do I enable System Restore?
After writing the above I did a search in the registry for System Restore but there were only about six or seven references. I also had a quick look at Services and noticed that VSS was stopped. Following a search which revealed that System Restore might depend on it I started it. I then signed out and then back in again but I still can't get System Restore enabled.
A couple of days ago I made a system image backup (there were no error messages that it was unsuccessful), now I need to restore it, I boot Windows 10 DVD, point to a network location and start the restore, but after an hour or so, at the end it errors with "0x80070057: Parameter is incorrect". After that Windows boots to diagnostic mode but fails to repair anything. Diskpart shows that the partition which used to be C is RAW, I also have an impression that the order of partitions is different (C was 3rd, after restore it seems to be 1st). I checked and I'm able to mount VHDX with C partition and access all files, chkdsk doesn't find any errors on it. It's a UEFI computer with GPT installation. Is there some way to restore it with some 3rd party tool, or manually? What can I do?
PS: there's a lot of clues on the internet about fixing similar problem when such error popups at the beginning of restore from a USB thumb drive. The solution is to unplug the thumb before starting so the restore doesn't get confused with the additional drive. It's not the case here, I'm not using USB thumb and I get the error at the end of restore.
Update: I managed to restore an older backup of Windows 8.1 from before upgrade to Windows 10. I used Windows 8.1 DVD for the restore.
The difference between an old image and the new one is that after upgrade to Windows 10 I removed an optical drive and replaced it with a SSD which I was using for page file and ReadyBoost. Also, Windows 8.1 had 3 partitions, while after upgrade to Windows 10 I noticed that there's some additional 4th partition (so there were 2 restore or EFI partitions, not sure which), but the backup image of Windows 10 still consists of 3 VHDX files. The image of Windows 10 isn't an image made from a scratch - when I was setting up the backup I simply pointed to the old 8.1 image and Windows 10 was making its images on top of the old one (I wanted it to backup the differences only, to avoid huge transfer of the whole drive).
Anyway, as I already stated I'm sure that VHDX of Windows 10 isn't corrupted. It's probably some problem with XML metadata so the restore procedure can't recreate proper partition layout corresponding with images, or something. A
I see that Win10 has deleted the function to schedule the creation of restore points! Supposedly it creates a new restore point before downloading updates (if the function is turned on; by default it is off!).
I like to schedule the creation of points every few days or each week to prevent viruses from corrupting things. This feature is so important; I can't believe they have hidden it, made it less functional, and turned it off by default!
Is there any way to run the creation button from the task scheduler or something to automatically schedule restore point creation?
Question; My computer had to be reformatted because of a lock out by a hacker, can I use a restore point that I made before the hack, to restore my files? The restore points and system image are on my back up drive , I restored a couple of files from it. and the folders are there but I do not want to screw things up, as I don't know what I am doing.
I installed windows 10 technical preview yesterday . I found a problem with system restore. It goes through everything normally but after it reboots I get an error. In the details it says:
System restore failed to extract the original copy of the directory from the restore point. Source: %ProgramFiles%WindowsApps Destination: Appxstaging An unspecified error occurred during system restore. (0x80070057)
Maybe I have a misunderstanding of how System Restore works. Yesterday I uninstalled a program that I'd like to now get back. The company that made the program no longer offers archive downloads for that program in particular. Today it occurred to me that I could do a System Restore to when the program was still on this laptop & all would be returned as it was.
The first 2 times I tried was a total fail for returning the program but when I went back to a week ago it was there. Something is missing & it errors asking for the old install software that doesn't exist anymore (the program was purchased it 2008).
I have recently had to re-install Windows 10 and had problems before so decided this time to do a clean install and then run the system image backup. This went well but when it came to the testing of the restore a problem arose. I was using the Repair Disc created after the system image backup completed and could not understand the source file indicated was not where I had put the backup. The restore said the file was on the C: drive which was what I was trying to restore to.
So overall, I was having a issue with creating a system image. It would state that "The specified backup storage location has the shadow copy storage on another volume (0x80780038)"
After reading several forums I found that if you delete the restore points you are able to create a system image.
During my troubleshooting, I was attempting to backup to a 64GBthumb drive (this worked in win8 and win7)..
As I was trying to use the thumb drive, I ran into the following issue..
First it says it needs to be formatted to NTFS. Once I format it to NTFS, it says "The drive is not a valid backup location"
Images I found - [URL] ....
I do not want to use any 3rd party software to accomplish this.
So changing the system language should be as easy as settings>region&language>Download the preferred language
Now:
In doing so, my system did change from Russian to English, although not properly. Most objects are English as you'd expect after the change, but some system elements are still Russian. For example, grayed out text in textboxes (The explanation of what you should type) is still Russian. Also, the date & time on the lock screen is still Russian. Also, the "windows is waiting for apps to close" when shutting down, is Russian, both text and buttons. Is this a windows10 flaw?
So I have a problem on my laptop that only some programs can use sound, such as, I'm playing a video on YouTube and on volume mixer it shows Google Chrome in my applications and it shows sound is coming from Google Chrome, but if I open a vlc video on the laptop, I can't hear anything from that and it doesn't show on my laptop. Yesterday I was playing a game, then I got a notification, then my sound stopped working.
Speakers 1.png 8.56KB.0 downloads All my applications that had sound was on this page, then next to Speakers/... there was an arrow pointing down, so I clicked on it and then I saw
Speakers 2.png 17.03KB 0 downloads and then all of the sounds that work was on this page.
All of my drivers are up to date and I didn't have any headphones plugged in when I took those screen shots and when I tried testing out the sounds.
I recently upgraded my computer from Windows 8.1 to Windows 10 and have noticed some issues:
Whenever I stop moving the mouse, the little blue loading circle keeps blinking. Now I don't exactly if it's causing any problems but I'm sure it wasn't doing that before I upgraded and I think it may be related to this second issue:
My touchpad no longer scrolls with two fingers. Now it only scrolls via touching the right side of the pad and dragging my finger up or down. No two finger gestures work anymore.
There seems to be a new driver called Elantech and I've found a settings menu for it but the gesture controls say they're turned on even though they don't work.
All of a sudden my start button will not respond to the left click. Right click works normally. This seems to be the only problem in the task bar. Is there a win 10 repair disk available? I have just discovered that there are no restore points! What to do?
When the popup notifications in Windows 10 show up, such as the auto-play ones when you put in a disk or a USB drive, they don't display the relevant icon, just the colored background box (see pic below). The autoplay itself is fully functional and works fine, it's just the icons. I'm not sure if the problem affects all apps or program that show icons on their notifications, but I'm assuming it does since, the app icons at the bottom of the "Settings -> System -> Notifications and Actions" screen were displayed the same way. I reset windows, and this seemed to fix the icons in that settings screen, but not the notification pop-up icons. In the case of autoplay notifications, it is not dependent on the disk, as it does the same for any disk or drive inserted or mounted.
Some of the things I've tried:
Restarting (obviously)
Creating new user (problem persisted)
Resetting the PC (deleted all files, without cleaning the drive. problem persisted)
I believe the support guy tried doing something with the registry, and he also tried updating my GPU drivers (which were already up to date)
I have some problems with Windows Spotlight feature. Everytime I select this as my lock screen, it seems loading, but ends showing the Windows 10 default lock screen picture. I tried to restart, update, did a clean installation of this Windows build, but nothing solves it.
I have an nvidia 860m graphics card (Lenovo Y50 Laptop with an i5 processor) and I cannot launch any games with it. I've uninstalled and re downloaded everything from the drivers to the games. My final conclusion is that something is wrong when my computer tries to use my graphics card, but I don't know how to fix it.
For when I launch Witcher 2, it says "Direct3D 9 device initialization error".For when I launch The Legend of Korra (game) it says "Error : Graphic::Startup() FAILED. No Graphic Memory".I looked at other threads, but I don't know how to reset a graphic card's BIOS.
