I'm troubled with the following entry in the startup of my Windows 10 Pro x64:Windows Registry Editor Version 5.00
[HKEY_CURRENT_USERSOFTWAREMicrosoftWindowsCurrentVersionRunOnce] "Uninstall %LocalAppData%Microsoft OneDrive17.3.5892.0626 amd64"="C:WINDOWSsystem32cmd.exe /q /c rmdir /s /q "%LocalAppData%MicrosoftOneDrive17.3.5892.0626amd64""
It should be noted that the "%LocalAppData%MicrosoftOneDrive17.3.5892.0626" folder does not exist.
I tried google searching just the direct phrase of "system and compressed memory", but came up with nothing. I have never seen it before until recently, and it is using half a gig average. When I open file location, it does bring me to the windows folder, but it does not mean it was something that was put there by windows.
View 5 Repliesi have this problem since a long time ago , and i can't seem to figure out how to fix it!
i am sick of this file, the option of "Open file location" is grayed out for it !
My PC performance with Windows 10 is very good except when it isn't
One of the things that is perplexing me is that my external hard drives seem to be impacting my startup performance. Following start up Task Manager performance tab shows one of my external drives (G) working at nearly 100% and the noisy disk drive suggests that it is working hard. The disk transfer rate also indicates movement between the PC and the drive. This is despite Drive G being used only as a storage/backup device with no automated actions configured. Yesterday Drive G became very hot as a result.
If I disconnect Drive G, my second external hard drive Drive F takes its place and task manager shows the same activity as previously shown on G. If both drives are connected F shows no activity.
I'v got a problem. I had 1TB HDD and fast startup was working for me, but when I move my system to a 120GB SSD, I cannot enable it. I'v got Win 10 PRO x64 and laptop MSI GE72-2qf
View 6 RepliesI was instructed to use Selective Startup to get Quicken installed (didn't work), and now I can't get out!
This is a laptop that has been stuck with the Microsoft account login (cannot fix it as other options are grayed out). I cannot login with my Microsoft login (says password is wrong), but I can get in using just the Admin. acct., with same password.
Using Admin. acct., I cannot get out of Selective Startup, most items are grayed out, or if I can select options (Enable from Disabled), then I get an error that things cannot be changed.
Noticed this under my startup programs but it does not show to be running. Should I remove it or what?
Uninstall C:Users\%username%AppDataLocalMicrosoftOneDrive17.3.5892.0626amd64
I have been using Windows 10 for a while now with no issues, I currently have three HDD's installed in the PC, one that's used to boot windows, a secondary 250GB for extra storage and a 1TB drive to storestream movies from.I was aware my 1TB HDD was not 100% as it came out of a faulty NAS drive, but after a full format it worked perfectly for over a year with Windows 7, but after the 10 upgrade it would completely disappear after a certain period of time, this was resolved by changing the power options to stop Windows turning off the disk.
Now i'm faced with Windows trying to perform a repair on the hard drive at boot, which takes ages to complete and boot windows, then after a restart it does the same which is frustrating.Question is how do i turn off this disk checking feature in Windows 10?For the mean time i have unplugged the HDD and all is working as normal, but obviously i would like to be able to use it and use other software to check the disk.
It's easy to disable items in the Startup tab of the Task Manager, but how do I remove the item from the list altogether?
I would like to remove SWFTP and the Realtek audio manager from the list.
I already searched everywhere in the forum. I have done it in the past, through the registry editor. But when I navigate to the key location, I don't even see those items within the registry.
After upgrading from windows 8.1 to windows 10,when i shut down and boot my laptop windows startup pretty fast 8 sec and The login screen appears.However when i restart windows the bot went well it start to be slow in the loading screen with windows logo 10 sec after that a black screen( if i click or move the mouse the cursor appears) 10-15 sec , after that an other clear blue loading screen with a loading circle in the middle, after that the login screen also take a while to login and desktop too take a while to show properly all the icons and task bar.
View 9 RepliesWe are having some performance issues at starting up laptops outside our domain. When we logging at the office booting proces takes about 10 -20 seconden. (with networkshares etc)
When outside the office so at home when we are logging in it takes about 1 minute to logging on. I have also tried it without business network shares, but that doenst solve the problem. It looks like we cant reach the domain controllers (of course) but is there a way to speed this up?
Specs:
Dell I5
8 - 16 GB memory
500 GB / 1 TB SSD
WIndows 10 pro
windows 10 professional
This is **NOT** a boot issue, the system boots up just fine and gets to the login screen fast. The issue is the system startup after login, it is takes a rather long time for Windows to become usable. I have tried stopping all NON windows services in msconfig, but this made barely any difference. Even after the system seems to have finished the startup, once I open the browser it then takes ages until it loads the first web page. If I run task manager there is nothing that is hogging the cpu or memory or disk.
I have defragged the disk, although I had to use a 3rd party tool to do this as Windows defrag refuses to do it because it thinks it is an SSD disk due to the 32GB SSD cache.
I upgraded my Alienware M17 to Windows 10 with no problems (knock on wood), but my girlfriends HP Envy Notebook is having some issues. Right after Windows 10 installed the first time it was fine for a few hours and then it ran an automatic update... After restarting the PC it took, literally, 10 minutes to get to the lock-out screen to sign in. After signing in everything seems to work fine. When I click restart it logs out quickly, shuts down just fine, but after the HP bios loads it goes to the blank Windows 10 screen (with the little loading dots circling) and sits there for 10 minutes before finally changing over to the sign in screen.
When I just "sign out" without restarting it also takes an equally ridiculous amount of time (8-10 minutes).At first I thought maybe I had done something bad with the registry cleaner... lol, so I did a full reset and reinstalled the OS, downloaded and installed all new drivers and everything was just fine (again) until it did an automatic upgrade... then its back to being nearly unusable.
Now, I have heard rumors that Windows 10 startup is ridiculously slow. How SLOW is slow? Like 8-10 minutes? Yes, I have enable fast startup (and hibernation) and it does nothing (yes, I know it does not work with "restart" and only "shut down").I wonder if the problem is when Windows 10 upgrades to version 1511 because it is fine before it does any auto updating. But if it keeps updating there is no point in trying to pinpoint which update it causing this.
Ever since I did the fall update on my desktop, I would get frozen bars on startup. This forces me to reboot my computer.
View 9 RepliesI am trying to determine why Firefox takes 20 seconds to open. This does not happen in Safe Mode so presumably another package is causing the delay. Consequently, I wanted to start in diagnostics mode. However, as soon as I click on the button for Diagnostics startup, the blue rotating circle appears next to the mouse pointer and never advances. I checked in Services and found the Diagnostics Host Service is not running and cannot be started.
View 9 RepliesSince 2 or 3 weeks when I switch on my notebook, after loading my desktop it hangs loading startup programs.When it hangs, I can't even shut down, I have to press the power button 4 seconds to shut down.It happened with my 3 notebooks, but it remains only in one of them.This problem remains in an HP EliteBook 8540w running Windows 10 Pro 64 bits. In this notebook I had uncheck the "Turn on fast startup (recommended)" when I installed Windows 10, because it didn't shut down properly.I don't know what to do, I tried SFC and DISM tool, both found errors but were unable to correct them.
View 5 RepliesI just installed win 10 last day, and it was going fine, no conflicts on the drivers whatsoever. But after a day, when I booted up, it seems to have slowed down to a point that everything does not respond to my inputs, though it does after a couple of minutes, i check the task manager and it shows that the disk usage is high, the r/w speed show high utilization about 10-40mbps and the active time is 100%? I have read some thread and suggested to turn off superfetch and prefetch but that didn't do a thing to me. Btw, I installed it over win 8.1 using a bootable usb.
View 5 RepliesStarted with a dual boot Windows 7 pro / XP HP Elite 8300. Upgraded Windows 7 to 10 and now it seems to take forever for the boot menu to show up. I can hit restart, it shuts down then just sits there doing nothing for several minutes. No hard drive activity, no video just the power light. Then it looks like it reboots and finally displays the boot menu.
With Windows 7 it went through the normal boot process and displayed the boot menu without the dead-in-the-water pause.
It seems Microsoft has eliminated a feature I once used prolifically: Hardware Profiles. Windows-10 does have a "hardware profile", but it is nothing like what was in XP (or in Win-7, as I understand it). I want to know if there is an alternative in Windows-10 that allows me to control which Services are enabled or disabled from one session to the next, based on the currently selected profile (XP also had User Profile, but that's a different beast, and that still seems to exist in Win-10).
In the older O/S'es (XP, 2ooo, and NT for sure), you could set up multiple "hardware profiles" (silly name because it related as much to controlling Services as it did to controlling Devices). You give each profile a name, and set which one is the default startup if you let the screen time out. This is like the timeout in a multi-boot menu, and it's a menu that comes up right after the O/S menu if you are multi-booted. If you're single boot, it comes up at that same moment in the boot process.
Then, in the properties dialog for an individual Service, in the Logon tab (if I recall correctly, or maybe it was a "Startup" tab), those profile names you made will show up as a list allowing you to set enable at bootup or disable at bootup for each profile in that list.
Windows 10 Home RTM.
IE11 default.
In the past, if I opened the Run and enter a command, that command will stay in the Run box.Next time I opened the Run, I would see that last command in the box.
Today, I notice it does not do that anymore. My last entry will not appear in the Run box. Just a blank Run box.
Is that normal ? Do other Win 10 Home users have the same thing ?
hp 15 laptop win 10 I upgraded from win 8.1 to 10 with a usb bootable. Everything went well and is working fine except! If I put a usb stick in with or without data then go to file explorer it shows a double entry for the usb stick. If it contains data it shows up the same in both entries. Is this a win 10 problem or my computer?
View 1 RepliesJust noticed the files that have been saved to my remote HD via file history are all saved twice, is this normal?
View 2 RepliesRight after I upgraded from Windows 7 Home Premium to Windows 10, I downloaded the new version of Ccleaner. I noticed that the following entry kept showing up in the registry cleaner:
"ActiveX/COM Issue InProcServer32C:Program Files (x86)HPCommonAclmControlProxy.dll HKCRCLSID{047466F1-82AE-455A-AFC4-D3AC463FBF6B}".
Under Windows 7 I never saw that entry pop up in the Ccleaner registry cleaner. I got sick of seeing it so I saved a copy and deleted the entry. However, it came right back again. Every time I deleted the entry, it came back.
My computer is running fine and this entry does not show up as malware in MBAM, MBAE or Windows Defender. However, I am concerned as to why it keeps showing up in the Ccleaner registry cleaner. Emsisoft lists the file as being safe and a legit Hewlet Packard file and I do have an HP printer.
Is this behavior due to the upgrade from Windows 7 to Windows 10?
Is it possible to create a new entry in the context menu in "new"? I often need an empty paint-pic.
For example .....
my problem is that the "action center" shows "no entry symbol" ..and "show app notification" is greyed out (unable to swicth on or off)..is there any chance to fix them.. thxby the way i did follow tutorial from this link Action Center - Enable or Disable in Windows 10 - Windows 10 Forums "the no entry symbol" still there..
View 3 RepliesWhen my Windows Ten Dell Inspiron 15 Laptop boots up, I need to enter a password to get to the Welcome Screen. Can I have that password entered by the system instead of me typing it in each time? If so, how do I do that.
View 1 Replies
