From the moment I switch ON my desktop until switching OFF (working for 12 hours) the local system service host is always between 30% to 40% regarding CPU usage.Why? How to stop it?
This does not happen in my Microsoft Surface Pro machine. Both machines, desktop and Surface have the same software installed so it's hard to believe this CPU usage is software based.
Here is my PC configuration :
Recently I am getting notification that my memory is low, close some application to free the memory. But I wasn't running any high memory consuming programs. Then I looked into my Task manager and got this :
I am really not sure why this is taking so much memory. This Service Host: Local System continuously taking more and more memory and it moves total memory upto 80% ....
This didn't happen before I am recently facing this problem. How I can stop this so that it doesn't take this unusual memory. I checked windows update but no update is pending.
I installed Windows 10 (10130 build) and I love it. The only problem that I'm having with it is this Photo Background app that eats my cpu(30-40%)! When I start up windows I need to kill it in task manager everytime. But even after I kill it if I leave my laptop in idle it still comes back. I want to understand what this Photos Background Task Host is doing, his functionality...
View 6 RepliesI have found that my CPU usage is running at 30%, due to Service Host: Local System (15). I have the list of the 15 processes, but how do I find which one is using all the power.
View 1 RepliesTask manager says my PC uses 95-100% of its memory, with the process using the most called "system" at only 200MB out of 8GB, if I set it to display how much it's using in percentages, it says 40-60%.
I'm running Windows 10 Home 64bit, on a 4770k with an MSI MPower Max Z87 Board and 8GB out of a 16GB kit of Corsair Vengeance 1600MHz CL10 RAM (I need to RMA the other 8GB, it's broken), CPU overclocked to 4.0GHz, no memory overclock.
I'm wondering whether it's a software or hardware problem, and if it's the former, how can I fix it?
After being loyal to windows 7 for loooong time I have decided to upgrade to windows 10 and I did not regret it till few days ago.
My laptop goes crazy hot but Task Manager shows like none CPU usage while Speccy shows rather high CPU usage and temperature.
I have 4GB of DDR3 ram on my laptop. When I go into the task manager to check how much ram is being used, it says only 795MB and yet it also says that 94% is being used.
This is always the case, of course with varying numbers. The memory usage shown does not coordinate with the percentage, but the computer performance certainly correlates with the percentage.
When I check in cpu-z, it does confirm that the 4GB are all installed. What is going on here?
Updated with pics:
I missed the performance tab which does indeed show all of the correct total amount of ram being used. Now how do I find all of the individual processes and services using those resources?
Here is my laptop specification:
- HP Pavilion g4
- Intel Core i3 2.2 GHz
- Radeon 6470m (but somehow got 7400 driver and worked) plus Intel HD 3000
- Windows 10 of course
- 2 gigs ram
- And latest drivers, checked with Uniblue's driverscanner and link on other subforum stickies.
It's high memory usage of this process, it starts with ~7mb then grows up to ~200mb on heavy use. This happen with recently windows 10 update.
What I have done is, I do a restart every time I made these changes:
- SFC /scannow
- Update driver (again)
- Turn windows 10 tips off
- Try disable Superfetch
- Malwarebytes scan
- Disabling High Definition Audio driver drops the process usage to normal 28kb, but this somehow rise again to ~100mb.
For a while I 'm having problems with locking while I surf the internet after five minutes browsing the facebook the browser begins to catch and is impossible to do anything , I noticed that this occurs when the system and compressed memory reaches 15% use the CPU when closing facebook use immediately falls to less than 1 % and the browser back to normal. I never had it before and started to happen with these recent updates.
before:
after:
I am surprised that this is not a topic of discussion. On my laptop which I migrated from windows 7 to 10, I always have a high CPU usage for Microsoft Search filter host. A search of the internet shows that this is an issue.
I have tried to disable with no luck. My next attempt will be a change in registry.
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionImage File Execution Optionssearchfilterhost.exe]
Add a REG_SZ value named Debugger and give it data of c:windowssystem32svchost.exe.
So, I want to make my gaming PC as effective as it can be. When the PC is idle (no programs running, except task manager), I have 36 background processes and 26 system processes, Ram usage is @ 22 %, like in the picture below, I have 8 GB 1866 MHz RAM...
I am wondering, is the RAM usage too high, or is it okay for Win 10 ?
I was thinking about uninstalling the Cortana app, because it eats around 35-40.000 K, but if I erase this, I wont be able to use windows search...
I just recently installed Windows 10 on my Dell Inspiron Laptop and so far I am not impressed at all - in fact, I am very seriously debating one of two actions - re-install Windows 7 or switching to an entirely different OS.
The reason for reverting to Windows 7/switching OS are as follows:
1) Currently with an idle system (i.e. no applications running at all), an svchost process is using anywhere from 40 to 60% of my cpu. When I did a tasklist on this process the following processes are attached to this one pid: Appinfo, BITS, Browser, DsmSVC, IKEEXT, iphlpsvc, LanmanServer, lfsvc, ProfSvc, Schedule, SENS, ShellHWDetction, Themes, UserMananger, Winmgmt, wuauserv. My question is this - is it necessary for these processes to be run. If they are, then am I looking at only being able to use 50% of my processor (since this one pid is using the rest of it)?
2) For a virus scanner - I am using McAffee and under Windows 7, it took my laptop 24 hours to scan 231 GB of data. Since I switched to Windows 10 (Same hardware, same memory, etc) it now takes my virus scanner over 48 hours to scan 231 GB of data.
3) If I had not been poking around and trying to change my update settings, I would never have found out that Microsoft expects their users to update the windows of the other users (Microsoft calls it Dynamic Updates). Now this is all well and good if some one had said something since I would have loved to know about it sooner since I am on a metered service.
4) Some of the programs that comes with Windows 10, I have no use for but yet I can not un-install them (Cortana come to mind).
5) It appears that even though I have turned off "Live tiles" the tile continue to update from the net (again - it would have been nice to know since I am on a metered service).
The only option that I know of is to revert back to Windows 7 or switch to a new OS.
I'm getting a constant high disk usage without even having anything running. Here's a screenshot of my problem
And well, so far I've tried the ''deactivate 'windows search' and 'superfetch''' and it hasn't really done the trick.
Also I resetted my pc yesterday, as of now I'm running a clean install of Windows 10.
Did the ''turn off notifications from Windows'' and really nothing, I've also defrag quite some times with Defraggler and DiskDefrag and nothing.
Basically I noticed that my PC has a lot of RAM used but no program is using the RAM - see attached screenshots. Obviously it doesnt really affect me until I launch a game: eg GTA 5 which before ran happily at 60 and is now stuck on less than 1 FPS when I get into the game (even after spending like 20 minutes in lag hell to try to reduce all the settings to the lowest).
However Rainbow Six Siege runs at 120 FPS with no issues, so GTA may be an isolated incident.
(Also important to note I only have 8Gb of RAM, even though it says */16.0GB for the committed memory)
Specs are:
Computer type:
PC/DesktopOS:Windows 10CPU:Intel Core i5 3570k Motherboard:ASUSTek P8H61-M LE/USB3 Memory:8Gb(2x Corsair 4Gb 1600mhz Vengeance) DDR3 CMZ8GX3M2A1600C9 Graphics Card(s):NVIDIA GeForce GTX970 Sound Card:Onboard 7.1 Audio (Realtek)Hard Drives:1Tb ST1000DM003-9YN162 ATA Device
1Tb Hitachi HDE721010SLA330 ATA DevicePSU:XFX PRO850WCase:Zalman Z11Cooling:Corsair H60 Water Cooler
I have recently noticed a bit of a performance issue on my HP laptop running Windows 10 Home.
What happens is, if I am not doing anything on the laptop, but am not putting it to sleep (i.e. idling), it stays at a low CPU usage. However, after a while (usually about a minute?), the CPU usage rockets up, and also affects my CPU temperatures (goes up from ~35'C to ~50'C).
The processes that are the culprit, as defined by the detailed tab of Task manager, are either "svchost.exe" or "System" - the latter is described as "NT Kernel and System" and is linked to ntoskrnl.exe.
The laptop came preinstalled with Windows 10 and doesn't have many programs installed.
I check and found this annoying code in the Event Viewer.The Event ID code is the same but with different explanation and usually come in group..This happened to me usually after restart....
1. Event ID 7031.... The Sync Host_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
2. Event ID 7031....The Contact Data_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
3. Event ID 7031....The User Data Storage_Session1 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
All these are on the Error Level... not warning.
So up until this morning my Windows 10 desktop has been performing really well. When the machine is idle the CPU use is only in the 1-3% range.
For some reason my idle CPU use is now CONSTANTLY 30-40% (even after a reboot)! Task manager says its "Service Host: Local System (15)". If I expand this process in task manager it lists:
Why is this happening all of a sudden? I have all Windows Updates installed and I run an i7-3770 CPU.
My machine is now slow/sluggish with 30-40% being hogged by these services!
I don't have any Malware installed as I run Malwarebytes Premium and the scan comes back clean. Some goes for a full anti virus scan.
After installing Windows 10, I have consistently been getting high memory and cpu usage by both the System and Service Host: Local System processes. Usually the usage keeps rising from 1GB to sometimes 8GB. I left my comp on while I was at the gym today and came home to it prompting me with a low memory available message. This must have shut down some processes because now my pc is running at 13% memory and 2% cpu. I have searched for this issue and found similar threads, but none of the solution work for me.
View 1 RepliesI just upgraded to TH2 from Win 10 Pro. I noticed that my disk usage is near 99% for the past 20 mins. It keeps fluctuatiing between 10 to 99. Normally my disk usage stays at 0. May be this might be Windows settling in after the upgrade? There was high disk usage the first time around when i upgraded from Win7.
View 3 RepliesSince I did a system reset, I started to have the process called " system interrupts " to consume high percentage of the cpu.
I usually avoid this issue by restarting the system twice. Another problem is the computer is no longer able to go into the sleep mode.
I just installed win 10 last day, and it was going fine, no conflicts on the drivers whatsoever. But after a day, when I booted up, it seems to have slowed down to a point that everything does not respond to my inputs, though it does after a couple of minutes, i check the task manager and it shows that the disk usage is high, the r/w speed show high utilization about 10-40mbps and the active time is 100%? I have read some thread and suggested to turn off superfetch and prefetch but that didn't do a thing to me. Btw, I installed it over win 8.1 using a bootable usb.
View 5 RepliesIn W10 when I leave my laptop in sleep mode overnight, it uses about 10% of battery life. In windows 7 it was way less, to the point that it wasn't even noticeable.
where I should start looking?
I have a Thinkpad X220T
From sometime in October, after an update, there have been periods, sometimes intermittent, sometime persisting for a long time, when Disk usage spikes up to 100%, and makes a lot of things unusable.
I did some researching, and disabled a bunch of stuff, like Windows notifications, Windows search, background intelligent transfer and superfetch, even OneDrive, but even on Windows 10 version 1511, Disk usage spikes to 100%, the offending application / service being anything from System to memory compression to 3rd party applications...
This is becoming extremely irritating, and my video playback or something else stutters a lot when disk usage jumps up, often at chronic levels, then backs down, or stays at that usage for some time.
In my computer I use Windows 10 x64 and I have 6 GB of RAM installed. I face the problem of high usage of Ram from System process. Although I hear that this is something normal for Windows 10, this tends to freeze my PC or prompts me to close running programs although I do not have that much open. I updated all my drivers, I also tried everything proposed in various solutions around the web but the problem still exists. Could it be some update of Microsoft? A friend of mine running Windows 7 with 8GB RAM installed in his computer, faces the same problem the last weeks too.
View 1 RepliesI'm facing a problem with the task manager. Suddenly both of my HDs stopped showing any activity in the task manager and are constantly show 0% although there is activity and despite the fact that in the resource monitor activity is shown properly. What the fault might be?
I think they've stopped after I connected an external HD. But I am not sure though so don't rely on that being the issue.
When I am downloading something with utorrent the memory usage in task manager slowly creeps to 100% and makes my computer unusable and even if I shut down utorrent the memory usage does not change and I have to restart my PC. Same goes for browsing facebook or any other sites. Is there a solution to this? I really don't want to reinstall my system.
View 9 Replies
