Series Of Different BSODs
Aug 21, 2015
I have been running windows 10 for a week or so with no trouble until yesterday. I use DriverToolkit to keep all my drivers up-to-date and installed properly. I ran a scan yesterday morning and it fixed 13 drivers with no error at the time. Shortly thereafter I received 4 BSODs each about two hours apart (and another one this morning) and when I click shut down I get to the shutting down screen and the circle of dots just spins forever -- never shuts down -- until I pull the plug.
The BSODs were the following (in this order):
IRQL_NOT_LESS_OR_EQUAL
KERNEL_SECURITY_CHECK_FAILURE
PAGE_FAULT_IN_NON_PAGED_AREA
SYSTEM_SERVICE_EXCEPTION
CRITICAL_STRUCTURE_CORRUPTION (this was this morning)
CPU: Intel 4790K (no OC)
MOBO: ASUS Z97-AR
RAM: 8gb DDR3 (2x4gb) - I think it's Patroit
Graphics: EVGA 8400GS
HDD: 2x 1TB in RAID0 (Intel RST)
View 1 Replies
Similar Messages:
Sep 2, 2015
Since a little over a week or so I have been experiencing frequent BSOD when playing games (these include Witcher 3, WoW, CSGO....). The main ones that show up are:
-Memory managment
-PFN_List_Corrupt
-System_Service_exception
Sometimes it only crashes to my desktop but overall they are very frequent and quite annoying. It occurs both when I have several programs running at once but also when only a single program is up. The computer is new, have only had it for around 2 months.
My drivers are all up to date, I have run virus and malware scans which have not come up with anything. The errors to me seem to point to a RAM issue (although I quite honestly know nothing about these things) so I ran the windows memory diagnostic which did not come up with any errors.
My Rig is:
Windows 10 x64
AMD FX(tm)- 8350 eight core processor
NVIDIA Geforce GTX 970
Crucial 8 GB Sport Ballistix 240 Pin DIMM DDR3 PC3-12800 Memory Module
Dump File : 090215-24546-01.dmp
Crash Time : 02-Sep-15 7:30:47 PM
Bug Check String : IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x0000000a
Parameter 1 : 00000000`00000048
[Code]....
View 1 Replies
Aug 19, 2015
Brought new CPU+motherboard. Decided to use windows 10. Getting BSODs all the time, every few seconds or minutes. Sometimes even while installation i getting CLOCK_WATCHDOG_FAILED. If i got lucky and windows successfully installed. It bsoding every few seconds with: CLOCK_WATCHDOG_FAILED, IRQL_NOT_LESS_OR_EQUAL, HAL_INITALIZATION_FAILED. Can't install any drivers. I tired to use win10,win8,win7-Clean install. Everywhere - same issues, same BSODs.
Hardware(Nothing overclocked):
CPU: AMD FX 9590 - CPU and Motherboard was tested in guarantee service via IDA64, SiSoft Sandra. No issues was found.
MB: ASRock Fatal1ty 970 Performance
GPU: GeForce GTX780 - Have 2 more similar cards. Tried with every of them. Same problem.
RAM: 8+8gb 1600mhz Dual-Channel mode. Tested via memtest 1day. No issues.
HDD: Have 6HDDs, all was tested. No bad sectors. SMART report also fine. Bsods happens on all of them.
PSU: Thermaltake 1200WTT, all voltages looks fine. Anyway i tried with hiPro 1000wtt - same issues.
BIOS have last version v1.20. Tried to reset CMOS. Running windows diagnostic tools gives nothing. When i trying to use windows cmd.exe and run SFC /SCANNOW it gives me BSOD in a few seconds. DISM gives me the same - bsod. Running SFC /scannow via windows DVD says everything fine.
I have a few more old amd FX cpu's. I can try to use them if can find the problem.
Minidump files from last bsods: [URL] ....
View 1 Replies
Oct 6, 2015
Pretty much when i play games like shadow of mordor, GTAV and blood bowl 2 I have been getting blue screen of deaths.
Here are some dmp files from the recent BSODs I had [URL] ....
View 1 Replies
Aug 17, 2015
I've got this rig that I assembled a month ago that keeps random BSODing on me on boot every time I turn it on after a long time off (I turn the power strip off every night and on again on the other day and most of the times, that's when it happens). It won't even get to the log on page before it happens, and after the error it may happen again or boot normally, as if nothing happened and after that there will be no errors at all. I first installed Win 8.1 and got the errors, and hoped that updating to Win 10 would make them go away, but unfortunately it haven't. Since I'm not receiving the same error again and again, if it's software of hardware - most of it is brand new (CPU, MB, memory sticks, case).
The errors I'm randomly receiving (yes, there are lots of them):
Kernel Mode Driver
System Service Exception
Page Fault in Non Paged Area NTFS-sys
Kmode Exception Not Handled
Drive IRQL Not Less or Equal (again today, when I booted up)
System Thread Exception Not Handled
Bad Pool Header
DPC Watchdog Violation
I really don't know what to do - what software is it, what hardware piece to change, or whatever. Yesterday I updated my drivers once again and can't say which of them could have been resolved.
My rig:
MB: ASRock 970 Pro 3 R2.0
CPU: AMD FX6300 Black Edition
RAM: 1x Corsair 8GB DDR3 1600 Mhz PC12800 - CMV8GX3M1A1600C1
GPU: EVGA NVidia Geforce GTX 550 Ti
PSU: Akasa ES Plus 450W AK-P450GBK
3 HDD, one of them empty
1 DVD Disc Reader
1 PCI USB 3.0 hub
View 1 Replies
Sep 11, 2015
I searched how to screenshot, and found the "alt + prntscr" method. I managed to take one screenshot. Every time I try now nothing happens. I have also tried just pressing prntscr.
View 1 Replies
Aug 14, 2015
My Laptop will not sleep. It's an Acer Aspire 5250 Series Laptop. Below is the screenshot of the issues that I have ran and found from Command Prompt.
View 9 Replies
Oct 28, 2015
I have a VAIO F Series VPCF217HG that I just upgraded to Windows 10 a few days ago. So far everything worked fine except one problem.
I have a perfect internet collection, as in I am still able to go on to websites and download/upload stuffs, but every time I try to use any of the Microsoft features, it keeps saying that I don;t have an internet connection. I cannot use Cortana or Windows update and a lot of other features. I tried to use the ""Use SSL 2.0""Use SSL 3.0""Use TSL 1.0""Use TSL 1.1""Use TSL 1.2"" fix but it did't work.
I thought it was because of my outdated Mcafee, so I uninstalled it but the problem still persists afterwards.
View 1 Replies
Aug 11, 2015
I am using hp pavilion 15 series P077tx laptop. Currently I am running windows 10 single language. Everything works just fine but when i turn off the laptop it wont shutdown the display goes off but the power led & the system led remains on. I have to hold the power key for 5sec to turn off my laptop every time.
View 1 Replies
Oct 22, 2015
I recently upgraded to Windows 10 and found out that I am not able to print out all. When I was using Windows 8.1, I was able to print with ease. But now, it is unable to print.
I use a Lexmark 7600 Series printer.
View 1 Replies
Jan 26, 2016
After a series of updates, one of which must have been at issue, ALL of my conversion software applications now fail to /convert/ any files. The programs load properly but that is followed by various issues depending on the app.
Tipard will load, load video files, and start to convert... but immediately fail upon starting the conversion process.
Handbrake will load, but locks up on loading a file, any file, regardless of length, at the 20% mark.
MakeMKV won't load at all.
VLC randomly crashes, or refuses to play videos, music, or anything, after an undetermined amount of time.
My FTP software no longer loads its settings files and scripts.
And an annoyance, all of a sudden all my icons have little green check marks on them.
Windows 10 Professional x64
Version 1511
Build 10586.63
AMD FX 9590 X8 4.7
32 GB ram
Tipard Blu-Ray Converter Version 7.3.30. No message just an icon notice. See photo
handbrake 0.10.3.0 x64: Preset Export Failed. Unable to load in Presets. Please restart HandBrake No additional exception information available : upon startup. Added files freeze program at 20% mark
MakeMKV (What version, won't load at all)
Paint won't save any files anymore. See same photo
View 7 Replies
Feb 23, 2016
I'm using Win10 x64 and Intel 520 240GB SSD:
For my mobo, Asus P8Z77-V-Deluxe, I downloaded the official asus chipset drivers.
There is one for Win8.1 x64 and a Beta version for Win10.
The chipset driver for Win8.1 has installed the following:
1. under Device Manager> IDE ATA/ATAPI controller > Inter 7 series/C216 chipset Family SATA AHCI Controller
2. Version 12.8.0.1016 - Date 2013/08/01
If I install the Asus Win10 chipset driver, then instead of the Inel SATA controller, I'll end up having Standard SATA controller by Microsoft.
I'm currently using the Asus beta Win10 chipset driver, however I manually installed the Intel SATA controller which is officially supported on Win8.1 and is digitally signed.
I ran two SSD benchmark test with AS SSD (latest version).
With just the official Win8.1 chipset driver as mentioned above, I'm getting the following results:
With the Win10 beta chipset driver and the Standard SATA controller by Microsoft:
And here are the test results made by Intel SSD 520 Series Solid State Drive | Intel,SSD,520 Series,Solid State Drive,SSDSC2CW240A3,Benchmarks,Performance,Reviews,Olin Coles,Intel SSD 520 Series Solid State Drive SSDSC2CW240A3 Benchmark Performance Review by Olin Coles
Can spot the difference?
View 4 Replies
Jan 8, 2016
I am unable to print wirelessly with my Epson 545 Series printer. Works fine with old laptop Windows 7 but Win. 10 is having a problem.
View 1 Replies
Sep 5, 2015
I've got a notebook Pavilion DV6-3152SL with hardware AMD Phenom(tm) II N620 Dual-Core 64 bit, bios F29.
After upgrading from Windows 7 HP to Windows 10, I've got a big problem with the AMD graphic drivers, which are both now version 15.200.1062.1004. ATI Mobility Radeon HD 4200 Series seems to work fine, while AMD Mobility Radeon HD 5000 Series stopped working of an error code 43 and I'm unable to fix it. I've already tried these chances, but no one of them has succeded to solve the problem of my AMD Mobility Radeon HD 5000 Series:
- Updating the driver from the AMD website both installing it manually and utilizing AMD Catalyst Istall Manager;
- Withdrawing the HD 5000 to let Windows Update installing a new one;
- Updating through the software HP Support Assistant.
... But I can't fix it: driver update for AMD Mobility Radeon HD 5000 Series is impossible. And, in any case the configuration goes lost at reboot and my notebook goes on saying "No AMD graphics driver is installed, or the AMD driver is not functioning properly.
View 1 Replies
