So I have read a couple of articles of people with the same issue and they're saying that i should uninstall the graphics card drivers, and reinstall them, and i have done that and I'm still getting the same problem. I can't play any games and it's rough.
I just upgraded to Windows 10 on a brand new Lenovo Z50 laptop. It crashes whenever it is not plugged in with the error message THREAD_STUCK_IN_DEVICE_DRIVER ....
I assume there is some driver that I'm forgetting to download that is related to the battery or something?
I have Intel Core i5 and AMD Radeon 260X (I just switched to it).Got my Pro 64-bit Windows 10, but after I start a game or process like for ex. Skype, the system crashes. It is something similar to the blue screen of Win7. I know it is normal new OS to have bugs and glitches, but that is just too much.
The bluescreens are really random and like to happen out of no where. I could be playing League or Blade and Soul and it when it happens. I usually always have chrome open in the background watching something. Some days PC would boot up and I would have to restart because it's slow and not opening anything.
I get this error every time i try to use the internet while playing various games. windows 10 right now it wasnt worth the free download to me right now.
I had the above message on the Blue Screen and when it automatically rebooted, it rebooted 4 times before going into a black screen. I have a (crappy), fairly new Dell Inspiron 3520. I was running Windows 10 on it (yes, I was stupid enough to install it on a laptop that wasn't tested by Dell for Windows 10, that's pretty much my life). It's been fine up until today when that happened.
So, I wanted to reset my pc via windows 10 and everything was ok untill the resetting got stuck on 99% and I restarted my pc.
Now when i start my pc I cant press f8 and get into advanced boot options and when windows starts up It says INACCESSIBLE_BOOT_DEVICE. Your PC ran into a problem and needs to restart. and then windows keeps restarting my pc for no reason.
I do not have a windows CD. I can only get into my ASROCK Bios
So I was having a problem with my laptop stuck in a "Diagnosing Your PC" loop and then it would say, "Bad_system_config_info", and start the loop over again.
So I booted from a Windows 10 USB to repair/reset it with the "Keep My Files" option. Since then, it's just been stuck on a blank blue screen for the last 20 minutes.
Is this part of the reset process or did something go wrong?
I downloaded and installed the Windows 10 upgrade on Tuesday. Since then my Dell Vostro 3550 laptop will not boot and is stuck on a blank blue screen. I took my laptop to Geek Squad at Best Buy yesterday and he told me Windows 10 is installed but it will not boot. He loaded their MRI operating system with my CD/DVD drive and he told me my files are still on my laptop. They wanted $100.00 to get my files of my laptop into a flash drive. The flash drive cost $30-40. In order for them to fix my laptop, I would have to pay $200.00 for a one year service contract. Then, to solve the problem, they would delete all of my programs, and possibly all my files, from my computer. That totals a minimum cost of $340.00 and that is if they do not find anything else wrong. I told them I could not afford that and I took my laptop home.
When I got home, I tried again to boot my computer and I got this message: WDF_VIOLATION. I ran a pre-boot diagnostic and I got error code 2000-01 42. Msg: Hard Drive 0 - self test unsuccessful. Status = 7. I looked online for information on this error code and found people saying that this means the hard drive has gone bad and needs to be replaced.My laptop was absolutely fine before I downloaded Windows 10 on Tuesday. Now my hard drive is destroyed and my laptop will not boot!
Last night I was watching a dvd on my desktop when all of a sudden a blue screen came up with a frowning face and said that "Your computer ran into a problem and needs to restart, its collecting info and will restart." It happened quickly so I didn't see what the error was but now my PC is stuck in a loop where it restarts and loads into an empty blue screen. It stays on that blue screen for a minute or so and then restarts again. I tried going into my BIOS or starting in safe mode but my PC won't go into them.
I returned home from work today to find that my computer won't boot. Great, it's going to one of those weeks... After the bios screen and the windows 10 logo, the computer hangs on the following screen, blue background with the spinning white dots. It looks like it's trying to log in, but it gets stuck. The dots never freeze, or at least not in the hour or two I've left it- it just keeps spinning and trying to log in. Before I go further, I'll give you some specs:
Homebuilt Windows 10 desktop, up to date (upgraded from 7 months ago) Gigabyte z87x ud3h mobo Haswell i5-4670k Nvidia 780ti 8gb ram
Ok, where was I. The strange part about this is that everything was working fine yesterday, and I didn't really do anything since then. I upgraded from W 7 to 10 months ago and it's been working fine. There were no windows updates yesterday (Feb 22nd), and I didn't install any other driver or system updates. In fact the only things I did install were the Steam VR test and a game on steam. Nothing else was changed since the last time it booted properly.
Now, onto what I've tried. I'm at a bit of an impasse here because I can't really get the computer to do anything. Booting into bios works, but that's about it. I can't get into safe mode (W10, F8 doesn't work, can't restart into it from desktop, or from login screen).. I've messed around with cables inside the tower, plugged and unplugged hard drives. In the course of restarting many times, I got a "bios corrupt" error, after which it started recovering into the secondary bios (losing all my OC settings and other bios settings). But the problem persisted.
I then tried updating my bios, but I keep getting "invalid file" messages when I try to update from bios/Qflash. Finally, I didn't have a W10 recovery drive, but I downloaded one from Microsoft. Startup repair says it cannot find any issues, and attempting a system restore gives me the error "you must specify which windows installation to restore. Restart, select OS, then select system restore." that doesn't seem useful. Ok, on to command prompt. Trying to enter safe mode from here gives me a "boot config data could not be opened. System device not found."
just recently i installed windows 10 (clean install) on my built desktop. At first it was fine installing programs etc. Then not sure what i installed last or what happened during an installation but now when i try to install a program like Nivida Graphics Card Driver the blue screen error comes up. It never fails, even if i try and install skype it also causes the problem. I originally had the Nvidia G experience installed but i read online that this might be causing the problem so i uninstalled successfully but it is still happening.
It has happened twice since I installed windows 10 in the last two weeks.
I have the default blue desktop in 10 and I also have a rather old ATI Radeoon HD 4600 graphics card, though the driver date in device manager is January 2015.
Whilst browsing facebook on two occasions the screen has just gone a totally blank blue colour, no error messages or anything like that. I have to hard restart, as task manager won't come up, and windows 10 starts fine again, doesn't go thorugh CHKDSK or anything.
WIndows 7 works perfectly on my other partition so not a hardware or monitor problem just specific to windows 10.
Valid windows 7, sit back and relax message on the install, then blue screen of death and error loop, No support from Microsoft. Off to local computer store to see if they can get this fixed or off of my PC..... way to go Bill - no wonder the upgrade was free.
I downloaded the MediaCreationToolx64.exe to upgrade to windows 10 but it failed at 83%. An blue error screen appeared with . I wasn't even able to read the error because my laptop shut down.
So I tried upgrading to windows 10 again but now it requires me to give a product key. I tried to put my windows 7 product key but it does not work.
I m using dell inspiron 14, and upgraded to windows 10. Now my laptop keeps restarting giving me internal power error. I reached the troubleshooting part where I clicked on startup settings.when I click restart there..it restarts with blue screen without giving me safe mode option.
So every day i get this blue screen error 3 times a day, my pc started doing this 2 weeks ago, never did it on windows 8.1 and was fine on 10 for a while. Googled it and says its a cpu voltage error, but i have reset my UEFI to defaults, updated UEFI, updated drivers , and nothing works. My CPU is the intel i7 4790k and the motherboard is an Asrock Z97X killer. The interesting thing is my laptop does the same thing and so does my friends all in one pc, so is this a windows 10 issue? and is there a fix?
Every time I try to unplug my laptop I get an error message that say Thread in Device Manager" and the system shuts down a few times and reboots. I can never unplug my laptop with out this happening.
I installed a copy of windows 8 that I owned and then upgraded it to windows 10. It was working fine for a couple of weeks, and suddenly it had and error and is stuck rebooting itself with a blue screen error.
The error appears to be different every time but the ones I have seen repeated are "WHEA_UNCORRECTABLE_ERROR" and "MACHINE_CHECK_EXCEPTION".
I can get into the BIOS and that's about it. I can't find a way to boot into safe mode and when I try and install a fresh copy of windows 10 via USB created from microsoft i still get a blue screen error after a couple of seconds.
I built my very first PC in the weekend. Everything was working fine, but after a restart, I had an error message saying something along the lines of "Windows couldn't start". I then had several options where I ended up choosing something like "Start Windows from a version that worked" which erased like half of my programs and many of my drivers. I then proceeded to reset the computer entirely and restarted.
Now, the computer is working again (as it were before) and I've installed everything again, including all the drivers (I hope). However, when I restart the computer, I get a blue screen that says: "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll start for you. If you'd like to know more, you can search online later for this error: BAD_SYSTEM_CONFIG_INFO. It then restarts and works perfectly. This only happens every approx. third restart, the other times, it boots just fine.
I bought Windows 10 Home on a USB which I used to install on my new SSD. All the drivers should be up to date. What to do?
My pc is unable to start-up after attempting to reset it(fresh reset). It is in a restart loop and when I try to turn it on the Windows 10 logo appears but then a blue screen appears saying "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we will restart for you." This then lets the PC restart and this restart process happens again. I have tried pressing F8 while it boots up to try to get it into safe mode but had no luck.