Just Created A System Image To Disc

Sep 15, 2015

I have just created a system image to disc, and I would like to know how I go about verifying that the disc is working. When I say disk it took 5 hrs and 19 disc's to finish. 

View 3 Replies


Similar Messages:


Can 64 Bit Boot Disc Be Created On 32 Bit System

Aug 19, 2015

I have a windows 10 64 bit computer which was upgraded from windows 7. I tried to do a restore but it came up saying unable to complete. Since then I have been unable to boot to windows. HP screen comes on and I am able to access Bios and Boot menu but that's where it stops. HP diagnostic tool at start says everything passes. I wanted to try booting from disc. I have another machine but its running windows 10 32 bit. Any way of creating a 64 bit boot disc from my 32 bit machine.

View 9 Replies

Created A Boot Disc Using MCT For Installing On New SSD

Aug 5, 2015

I have an Acer PC which was running an OEM version of Windows 7 SP1. I upgraded to Win10 using the regular upgrade process, and then created a boot disc using the MCT for installing on my new SSD. All went well, I was activated so I wrote down the Product ID (which I thought was my Product Key) and installed my new SSD. Installed Windows again, but in the process accidentally formatted the original HDD, which I wasn't concerned about because I had backed up my personal files and was looking for a clean install regardless.

Now I have 10 installed and running fine on my SSD, but it won't activate. I don't have the original successful install on an HDD anymore, and my OEM Windows 7 copy isn't available to recover to anymore either. I guess if the only option is rolling back to 7 and starting this all from scratch, how do I go about that, assuming I only have a Windows 7 .iso from the internet?

View 1 Replies

Suddenly Cannot Restore Image By Running System Image

Sep 21, 2015

Windows 10 Home.

I created system image backup file at least once a week. I did one yesterday, and today I needed to run it to restore my system. To my horror, I cannot find way to run it. I ran system image backup restore multiple times. I know how to do it...... until today. Today, by the time I clicked Troubleshoot option, there is no Advanced Options to choose from. Instead it sent me to Startup Settings option where I could go to safe mode etc,

I ended up running a system restore. Good thing I do create restore point religiously. But, after system restore, I still have the same problem.......... cannot restore image by using system image backup.

adding............... I went to my other laptop running Win 10 Pro, I had no trouble running system image restore. 

View 15 Replies

Upgrade Created Protected System Drive

Aug 20, 2015

Got caught by this sneaky Windows 10 downloading to my laptop. This download created a new partition on my harddrive as a protected system drive. I have tried to take ownership of this new partition with no success, I have tried to restore to a previous date with no success - it fails. How I can remove this partition from my hdd?

View 1 Replies

No System Restore Point Created During Microsoft Update

Aug 6, 2015

I upgraded from Win 7 to Win 10 this past week. All is well except for one thing. I received an update from Microsoft yesterday (Cumulative Update for Win 10 - KB3081424) and noted during the installation that no restore point was created. System Protection is ON and I am able to create restore points manually. Thus, this is only a minor annoyance since I can successfully create these points on my own. However, I would prefer for the system to do so when important updates from Microsoft come down. I guess it is possible that the update referenced above did not generate such a point but found that unusual since it is listed as a Cumulative Update.

View 4 Replies

How To Create Recovery Disc With Win System

Aug 7, 2015

I upgraded to Win 10 Pro.  I created a boot disc, repair disc. Now, I'd like to be able to recover from a system crash. How do do I create a recovery disc with the win system on it?

View 4 Replies

Can't Find CD / DVD Drives To Create System Repair Disc

Aug 17, 2015

One read-only DVD that will write CD's. Other drive is read/write CD's & DVD's. When trying to create a system repair disc, message says no cd/dvd drives found. ???

View 8 Replies

Cannot Use Disc Drive For DVDs Or Video Disc

Jan 26, 2016

System that doesn't use the disc drive for dvd's or video disc format is wrong - taking away something that now, you have to pay for. Do the wright thing Microsoft and reinstate the disc media player.

View 2 Replies

Cannot Make System Image

Jan 24, 2016

Whenever I try to create a system image or run recimg I get error 12289 and the backup fails. System protection is turned on and maximum space used is set to 20%. I have no third party backup software installed and this is a real not virtual machine.

PHP Code:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
  <Provider Name="VSS" /> 
  <EventID Qualifiers="0">12289</EventID> 
  <Level>2</Level> 
  <Task>0</Task> 
  
[code]...

Stop and start VSS servicesDelete old snapshots using vssadmin delete shadows /for=c: /all (there aren't any)Re-register VSS DLLsRe-install 9926.

View 1 Replies

Where Is System Image Creation

Jan 26, 2016

I successfully created the image to an external drive, apparently. It took some time and the moving activity bar moved to completion.Opening the drive there is no sign of the image altho there is one I created last year. Also altho it said that so much of the drive would be used the resulting free space seems the same as before the creation.It is not in my C drive so what has happened?

View 3 Replies

Performance :: System Image Check?

Nov 20, 2015

How can I check that my system image will work in the case of a crash, Windows 10.

View 3 Replies

Do Not Recognize The Image System In A Backup

Oct 26, 2015

I had updated windows 7 home premium to windows 10 then when the update was complete I created a backup image of the whole system.... and saved in an external HD. then my fixed disk died, replaced by a new fixed HD I can not recover the backed up windows ten image from my external HD ... is that due that when replaced the new HD I am contrived to recover the system with windows 7 home premium and windows 7 do not recognize the backed image of windows 10?

View 1 Replies

Performance :: Can't Restore From System Image

Aug 20, 2015

I created a system image on a Seagate external hard drive using Windows 10 Home, and I created a restore disc for booting with an external BUFFALO DVD drive connected to a USB port. I went into the UEFI and set my BUFFALO drive as the first drive to be used for booting at power up or reset. When I restarted the computer, a message appeared saying "Press any key to boot from CD or DVD". I pressed a key. After a few minutes, the following screen appeared:

I used the down-arrow key to select US and hit enter. Then the following screen appeared:

I used the down-arrow key to select "Choose Device" and hit enter. Then the following screen appeared:

This screen gave me only two options: (1) Boot with the BUFFALO optical drive, and (2) Boot with the Solid State Drive which the HP Spectre x360 has (instead of a real hard drive). When I used the down arrow to select the BUFFALO optical drive, the screen that asks for the desired keyboard layout reappeared. When I selected US and hit enter, the screen that asks for a booting option reappeared. When I selected "Choose Device" and hit enter, the screen that gave me the option to boot with either my BUFFALO optical drive or the Solid State Drive reappeared. I found I could keep going around in circles like this, without ever having an opportunity to restore the computer with a system image I had created earlier.

View 9 Replies

System Image Not Recognized For Recovery

Aug 21, 2015

I am trying to restore a Windows 10 system image with no luck. Here is what led up to this situation:

1. Upgraded from Windows 8.1 to Windows 10 when it became available the end of July.

2. Made a System Image (ssd m.2 mounted on the motherboard) after I was to a point where everything seemed to be working fine on 8/12/15 and saved the image to a separate hard drive on my system (E: drive).

3. Updated the bios from 2012 to 2501 yesterday and I was no longer able to boot from the ssd drive. Windows would start to load and then give me an error that no operating system was available. Tried everything I could to get Windows 10 to boot from the ssd drive with no luck (after the initial boot manager reached the point where the operating system should begin to load, all drive activity stopped)

4. Performed a System Restore saving all personal data because I could not see the system image I had created or access the original ssd partition the had original Windows 10 on it in a command prompt from within Windows RE (the drive did not exist).

5. Windows 10 now loads less all the programs I had installed.

6. When I attempt to restore the system image from advanced options in Windows 10 RE, it gets to the point of showing me available images for which there are none showing. I copied the image from the original hard drive to a USB hard drive and to a network location. Windows does not recognize the image in any of the locations.

I read in a thread somewhere that in Windows 10, the only way to restore a system with a windows system image was with the actual OS that created it. Since I did the Restore from the original system image from the recovery partition and not the one I had made the image with I am assuming that is why Windows is not showing any image to restore.

I have a custom built system:

Asus P97 Pro mobo
Intel i7-4790 3.6GHz
32 GB RAM
64 bit Windows 10
SSD - Crucial CT500MX200SSD4
Hard Drives x2 - Toshiba DT01ACA300

How to get Windows 10 to recognize the image. I am going to give it about another hour of research and then do a clean install.

View 7 Replies

Performance :: How To Create System Image

Nov 5, 2015

Windows 10 build 10586 x64. When I try to create a System Image I find that Windows 8.1 and Windows 10 are both selected. How Do I just create a system Image for Windows 10

View 1 Replies

Installation :: System Image Of Current OS

Jul 25, 2015

I am planning on installing Windows 10, and I'am thinking of doing a clean install. So my question is if I create a system image of my current OS i.e. Win 8.1 will I be able to restore it on Windows 10? Because I do not want to install every software again.

View 2 Replies

How To Set Up External HDD To Be Used For System Image Backups

Aug 31, 2015

How do I set up an external HDD to be used for system image backups? For example, specify how many images to keep, schedule the backup, etc. also, can I use the drive for anything else other than image copies?

View 9 Replies

Performance :: Trying To Do System Image And Save It To USB

Dec 19, 2015

I did a clean install of windows 10 and now i am trying to do a system image and save it to usb but windows keeps saying this is not a valid location, my usb is a sandisk 64 gb formatted to the correct format that windows asks me to do. I have tried to do create a image on two usb flash drives but i keep getting the same error from windows that this is not a valid location .

View 5 Replies

System Image Backup To USB Drive?

Apr 1, 2016

I recently purchased a Lenovo 900 ultrabook, and proceeded to upgrade from Windows 10 Home to Windows 10 Pro (using a Windows 7 Ultimate product key). Now that I have done this the factory "restore" does not include my upgrade and I am concerned that I would lose it if I ever needed to restore.

So, I am trying to do a full system image backup to a flash drive, but Windows 10 says that the drive is not allowed for this. I can create the USB drive as a network share and get the backup to work using that method, but I don't really trust that it will work properly.

How to do a full system image backup to a USB drive in Windows 10 that you trust will work in the case a restore is needed?

View 3 Replies

Partitioning For System Image Backup

Jun 29, 2015

I've not partitioned a hard drive on Windows 8/8.1. In fact, I've never partitioned a hard drive on Windows 7. The last time I partitioned a hard drive was Windows XP to dual-boot two operating systems. I'd like to partition the hard drive on my laptop in order to save a backup of my system onto it, as I don't have an external drive right now. Any detailed, step by step process to partition my hard drive and then back up my system onto it? I have 350GB of free space.

View 4 Replies

Create A Backup System Image

Aug 30, 2015

Before I upgrade to Windows 10 on my Windows 7 desktop I'd like to know whether or not there is a built in create a backup system image?

Once my Windows 10 upgrade is running properly and before adding in any new programs I wish to create a backup system image

--- I know I can use a 3rd party program and I am use to Macrium Reflect on my Windows 7 but I wish to know whether or not there is a built in create a backup system image utility
 
So far I have found which I will do while my Windows upgrade is in pristine condition
 
Recovery Drive - Create in Windows 10 [URL]
 
Windows 10 ISO Download [URL]

View 14 Replies

Burning Complete Image Of System

Oct 20, 2015

If I was to make a complete image of my system warts and all. What would be the best way to create it?The media creation tool kit or something else?

View 7 Replies

Unable To Create System Image?

Jan 25, 2016

error message when I tried to create a System Image using the built-in backup utility tool in Win 10?

View 9 Replies

Installation :: Transfer System Disk Image To SSD

Feb 10, 2016

I have created a disk image of the system disk, C: with the disk image software in Win 10 backup. The system disk was 70GB with 40GB of files. When I tried to write the image to the SSD the Win 10 install software said the disk (120GB= 110GB) was too small. I reinstalled the windows disk booted and shrank the system disk to just under 60 GB and retried the process with the same result. System is Win 10 32 bit on an old Acer netbook.I would like to be able to transfer the installed files to the SSD.I have looked at the tutorials for creating a system image and also how to create hardware independent image for installing win 10

View 9 Replies

Performance :: Creating System Image Backup?

Oct 23, 2015

I made a thread here some time ago in trying to create a System Image (Sys Img) using a 3.0USB 1 TB Toshiba External HDD. My issue is it runs then stops with errors and creates blank folders in the ExtHDD.

View 9 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved