SSIS - XML Config File
May 17, 2006
Hi All,
I am looking for help trying to configure an XML dtsconfig file, I am using different connection managers for my Source and Destination Databases, I am also using an XML dtsconfig file to set these parameters dynamically, however I dont want to use userid/password to connect to my source/destination databases and instead use trusted connection or windows authentication, I remember we had an option in earlier DTS where we could set it up as 0 or 1and use windows authentication, I cannot find this in the new SSIS package properties.
Appreciate your help in advance.
View 5 Replies
ADVERTISEMENT
Sep 2, 2015
Currently have a single hard coded file path to the SSRS config file which parses the file and provides the reporting services web service url. Â My question is how would i run this same query against 100s of servers that may or may not share the same file path as the one hard coded ?
Is there a way to query the registry to find the location of the config file of any server ? which could be on D, E, F, H, etc.Â
I know I can string together the address followed by "reports" and named instance if needed, but some instances may not have used the default virtual directory name (Reports).
Am I going about this the hard way ? Is there a location where the web service url exists in a table ? I could not locate anything in the Reporting service database. Basically need to inventory all of my reporting services url's.
View 2 Replies
View Related
Dec 17, 2007
Hi
I am developing one SSIS package to migrate an Oracle Database to SQL Server 2005 DB through ODBC. My problem is with configuration. I have to use configuration file so that in production environment the end-user must be able to change the user credentials to connect both database servers. I am trying xml configuration file. When I try to use xml configuration, my odbc connection is giving error. But if I disable the configuration through "Package Configurations Organizer", it works fine. Using an XML Editor I checked the .dtsconfig file and entered both passwords for the both connections.
I tried logging and below are the few text from log file related to error.
Code Block
User:Diagnostic, Nebu, BLRDOMNebu, DestOdbcConnection,{E3535ED4-1D21-41B9-9796-E9F5B47FFD5B}, {6820E259-18FF-4FCA-B820-73EE931D2095},12/17/2007 8:16:39 PM,12/17/2007 8:16:39 PM,0,0x,ExternalRequest_pre: The object is ready to make the following external request: 'IDbConnection.Open'.
User:Diagnostic,Nebu, BLRDOMNebu, DestOdbcConnection,{E3535ED4-1D21-41B9-9796-E9F5B47FFD5B},{6820E259-18FF-4FCA-B820-73EE931D2095},12/17/2007 8:16:41 PM,12/17/2007 8:16:41 PM,0,0x,ExternalRequest_post: 'IDbConnection.Open failed'. The external request has completed.
I am using Protection level = EncryptSensitiveWithPassword for the package.
Please help me.
Thanks & Regards
Charmis
View 4 Replies
View Related
May 1, 2008
I'm a newbie to SSIS so this question may cause people to point and laugh. I apologise if that's the case.
I have a configuration database that holds connection details to a remote database. I want to use these connection details to dynamically create a new connection to some remote database.
I usually work in with C# where this would be simple but I can't find how to do this using SSIS.
I have found people using configuration files but as I already have my connection data in a table I don't really want to strip it out. (Also, is it a security risk to have database connection strings stored in a config file?)
I have been able to implement a custom script object to build the connection string and assign it to a user variable within the package but can't find any way to then use that variable to connect to the remote database.
Can anyone help?
View 6 Replies
View Related
Sep 3, 2015
After developing SSIS Package (.dtsx file) if I need to deploy to all environments dynamically, then how can I create .dts config file and mention properties in it ?Â
View 6 Replies
View Related
Jul 2, 2007
Hi
While trying to build SSIS Package Project, the following error is thrown. I have added configuration file recently to fetch the dynamic values such as connection string, output path etc.
I tried manually cleaned up the debug folder and tried build but still the error occurs.
Can any one help in suppressing this error?
Error 1 System.ApplicationException: Could not copy file "D:ExportExport.dtsConfig" to the deployment utility output directory "D:ExportinDebug". ---> System.IO.IOException: The file 'D:ExportinDebugExport.dtsConfig' already exists. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.File.InternalCopy(String sourceFileName, String destFileName, Boolean overwrite) at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CopyFiles(ICollection fileNames, String outputPath) --- End of inner exception stack trace --- at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CopyFiles(ICollection fileNames, String outputPath) at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CreateDeploymentUtility(IOutputWindow outputWindow) 0 0
Thanks in advance,
Prabha
View 1 Replies
View Related
Sep 21, 2006
Hello All,
I experienced a weird error while deploying my SSIS package. After running the manifest file, i noticed that one of the configuration file's path was not updated in the dtsx file. My solution has 8 packages and almost every package has 2 configuration files. Except 1 file every other config file's path is being updated. Has anybody experieced such a problem?
Thank you in advance for your help
Sumesh
View 1 Replies
View Related
May 24, 2007
Does anyone have an example of a web.config file that works with Dynamic Data controls? I asked because I can't seem to arrange my "config sections" in any working order. I use 1 connection string in the web.config to establish a conversation with the database. Thanks in Advance.
View 1 Replies
View Related
Feb 21, 2008
Hi the data connectionstring will be generated automatically in web.config file after dragging a data table from database into webpage.for example: <configuration> <add name="SQLProfileConnString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|MSPetShop4Profile.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/> </> But what if I have to write the connectionString part myself, I mean where I can get the syntax of it? Thanks a lot
View 1 Replies
View Related
Mar 25, 2008
I have a simple SSIS package which includes one Analysis Services Processing Task. I have created a connection manager object (cmo) and assigned it to the AS task. Within the cmo I selected a specific user name and
password to log on to the server with. Tested this [domain][user account] and it works. Now here is the problem. When I run the package either in debug mode or from a command line, the packages ignores the connection manager and
attemps to use the account I am logged into the server with.
Using a config file to hold the credentials does not work either. When DTEXEC is used, the package attempts to use the credientials used to log in to the server.
Does anyone have any ideas why this is happening?
View 4 Replies
View Related
Dec 12, 2007
Hi All!
I've been struggling with a problem I have. When I use DTEXECUI to run a package and manually add the config file, it gets ignored and there is no warning as such.
Here's the set up:
1) create SSIS package that uses a DB connection
2) enable config, add XML config, export the connection string, disable config
3) edit config file, change connection string
4) open package from Windows Explorer (double click)
5) add config file created in step 3
All of that works fine, but there are times when it doesn't. I think it depends on the editor used in step 3. If I use textpad and "pretty format" the XML (from the huge one-line built from within Visual Studio), then sometimes the changes aren't picked up. I can tell this because the "default" server in development is not accessable in production. When we "reformatted" the XML back to one line, the correct server was connected to.
I have no idea what the problem with the formatted XML was. I thought it was CRLF vs LF, but I have at least one config that formatted that way and it works fine. My current thought is character encoding when using TextPad.
My biggest problem is that DTEXECUI doesn't tell you that the config file isn't going to be used. It just ignores the "bad" config format and goes on its merry way using the information in the package itself. That really scares me.
Has anyone else seen this? What is the problem being introduced into the config file?
Thanks,
Frank
View 3 Replies
View Related
Jul 12, 2007
I went through other threads and links on this subject. Still one thing which concerns me is the config files.
My current folder path is C:Karunakaranfolder1folder2
Under folder2 I have the following files
4 dtsx files
1 .database file
1 .dtproj file
1 .dtproj.user file
1 .sln file
1 .suo file
Config folder ( C:Karunakaranfolder1folder2Config)
common.dtsConfig
oracle.dtsConfig
Based on some of the threads, when I enabled package configuration, I changed the path from
C:Karunakaranfolder1folder2Configcommon.dtsconfig -> common.dtsconfig
Once I did this, when I open the project I get a dozen of warning similar to the one below
Warning loading <package1>.dtsx: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed.
What am I doing wrong here? If I have to deploy this to another box, what should I do to ensure that nothing breaks once its copied / installed?
Thanks
View 21 Replies
View Related
Jan 3, 2007
I think I've read to many post and now I'm confused on what the exact syntax should be and where in the web config file for connecting to my remote database on the web. I have a SQL Server 2005 database on the web. It was imported by the host from the members ID and passwords database created in Express 2005 from the ASP.Net configuration
Here's the portion of the config file:
<configuration>
<appSettings/>
<connectionStrings/>
<system.web>
Here is the sample connection string my host provided:
DRIVER={SQL Server};SERVER=sqlserver5.loosefoot.com;UID=myadmin;PWD=Your Password;database=eldersmembers
Would someone show me exactly what and where the syntax for the connection string goes?
Thanks in advance
View 8 Replies
View Related
Mar 1, 2008
how to solve error SQL server does not allow remote connection
View 2 Replies
View Related
Nov 6, 2006
Hi
Config files doesn't seem to work for me :( i want to make a common config file for all of my packages but it is giving me error
Validation error. The AcquireConnection method call to the connection manager failed with error code 0xC0202009
I have placed pasword in my config file too. Following is config file which i m using, server name n password are masked.
<?xml version="1.0"?>
<DTSConfiguration>
<DTSConfigurationHeading>
<DTSConfigurationFileInfo GeneratedBy="SSBKD955688" GeneratedFromPackageName="DTS_ACPM_MarkIT_Indices_Composites_TRAC_X_Asia_Index" GeneratedFromPackageID="{CB3660A1-5E6C-4D08-A7F5-4D6CE83578E2}" GeneratedDate="2006/10/19 14:05:20"/>
</DTSConfigurationHeading>
<Configuration ConfiguredType="Property" Path="Package.Connections[ssmgn838.ACPM.acpmuser].Properties[ConnectionString]" ValueType="String">
<ConfiguredValue>server=########;user id=sa;password=******;database=ACPM;
</ConfiguredValue>
</Configuration>
<Configuration ConfiguredType="Property" Path="Package.Connections[Text File (Source)].Properties[ConnectionString]" ValueType="String">
<ConfiguredValue>C:acpmfiletouploadCopy of ACPM_MarkIT_Indices_Constituents_Composites_1_ITRAXX_ASIA.tab
</ConfiguredValue>
</Configuration>
</DTSConfiguration>
View 3 Replies
View Related
Mar 25, 2008
Hi to all
i have sql-clr function written in C#.
i am performing data access opertaion using ado.net with in this function.
what i want ,to store connnection string inside config file.(appesettings)i got one article about this which is bellow
http://www.sqljunkies.com/Article/6CA864E9-E107-408E-B30A-4BA15B0CD11C.scuk#[4]
i follow all steps given in article.
but still getting error when executing function
A .NET Framework error occurred during execution of user-defined routine or aggregate "Amex":
System.NullReferenceException: Object reference not set to an instance of an object.
System.NullReferenceException:
at UserDefinedFunctions.CreateExpense()
can anybody help me....
thanks in advance,
Chetan S. Raut
View 15 Replies
View Related
Jun 11, 2007
I am using package configurations to store connectionstring for my database.
While moving the package from development to production, I used the same configuration files (without changing the connection string to point the database to production one). I ran the package in production and it updated the development database.
Then I changed the config files in production to point it to the production database.
However, the packages are still pointing to dev. database.
It seems that after running the package one in Production, it is not reading the updated config file for subsequent runs.
How to I make sure that the packages now read the latest config files.
View 14 Replies
View Related
Aug 9, 2007
In my SSIS packages I'm adding a config file that is storing only the connection strings to the database. Though most of my packages are reading or writing out flat files as well as connecting to a db. Do I need to put both db connection string and flat file connection strings in the config file? I'm currently adding only the db connection due to that will change depending which environment its ran in, unlike the flat file location will always remain the same.
I just want to be sure I don't need both for my package to run successfully.
View 1 Replies
View Related
Feb 15, 2006
Hi all
This is the situation: I've a dtsx package wich creates a tab delimited txt file from a sql server 2005 databasetable. Now this all works just fine. But what I want to do is that the user can choose the destination path of that created txt-file. Right now I've declared the path when I created the flat file source.
On the net I found that a config file for a dts package (sql server 2000 - Dynamic Property Task) could do the trick...
Any help plz?
thx!
View 1 Replies
View Related
Sep 26, 2007
Currently we have a 1.1 app that sets the connection string as a Application variable, we are wanting to change that and place it in the web config file, when I do this in 2.0 it's a simple process but in 1.1 it's different. It doesnt seem to like the <connection string> tag, does it go in the appsettings tag and if so what should it look like and how is it referenced.
View 2 Replies
View Related
Dec 5, 2007
I'm trying to get a SSIS package to run as a SQL Server Agent job. The package uses a config file. When I try to add the config file to the job under the Configurations tab. When I click on the 'Add' button, I get the following error:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The EXECUTE permission was denied on the object 'xp_availablemedia', database 'mssqlsystemresource', schema 'sys'.
The user does not have permission to perform this action.
The statement has been terminated. (Microsoft SQL Server, Error:229)
Any suggestions?
View 2 Replies
View Related
May 14, 2007
Hi all,
I have few config files with db passwords in them. I have to change passwords daily into that(as my system is in UAT phase now). I have deployed my packages on SQL Server.
My question is , do I need to deploy my packages daily after password updation, or it'll automatically taken care by the SQL Server ?
Thanks in Advance
syed
View 4 Replies
View Related
Sep 24, 2007
I would like to use one configuration file for multiple SSIS packages. How I want to do this is to save the connection string of my production server with the initial database field excluded and set that per package file. I am able to read in the configuration file into 2 different packages without issue but I cannot see how to extract the connection string into a ODBC Database Connection object in order to set the initial database. Is there some way I am not thinking of to do this, either through the designer or programatically?
Thanks for any help you all can provide! I am so n00b to SSIS.
View 6 Replies
View Related
Sep 27, 2007
Hello
I made certain changes in the properties in my Config file and by Change the ServerName and Database Name.
below is the example
When i execute the package it still runs. I mean theer is no server or database with that name but it still works.
<Configuration ConfiguredType="Property" Path="Package.Connections[ConManName].Properties[ConnectionString]" ValueType="String">
<ConfiguredValue>Data Source=UHS137;Initial Catalog=UH_IntegrationStaging;Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;</ConfiguredValue>
</Configuration>
Changed to
<Configuration ConfiguredType="Property" Path="Package.Connections[ConManName].Properties[ConnectionString]" ValueType="String">
<ConfiguredValue>Data Source=NOSvr;Initial Catalog=NOdB;Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;</ConfiguredValue>
</Configuration>
Then I created a new config file in which I checked in the box for ServerNam and when i change the name teher in the Config file
EXAMPLE
<Configuration ConfiguredType="Property" Path="Package.Connections[ConManName].Properties[ServerName]" ValueType="String">
<ConfiguredValue>NoSvr</ConfiguredValue>
and when executed teh package its fails.
Thats what I neede
SO coming to my question.
1)What is it doing. I mean how is the package talking to this config file
2) Irrespective of what I do in the Connection String the package executes fine, which It should not do as far as my understanding goes. Why is it doesn't matter whats in String. where as it matter in later.
View 5 Replies
View Related
Jan 29, 2007
Hi i used
http://msdn2.microsoft.com/en-gb/library/ms160724.aspx
MSDN Article sample to enable custom security method in to my report project,
also i RSWebApplication.config
<ReportServerUrl>http://localhost/reports/pages/folder.aspx</ReportServerUrl>
but each time when i login using a correct user name and password from the login page it just automatically redirect to the
http://localhost/reportserver url ?
but i need to change it to the http://localhost/reports/pages/folder.aspx url ?
how can i do this task ?
regards
sujith ?
View 3 Replies
View Related
Jan 31, 2007
Hi all
I'm trying to connect to a Sybase DB using an OLE DB connection. Now, it works fine when I run the project without the package config enabled, but when I add the Sybase connection to the xml config file, & enable it the connection fails.
This is the error I see in the progress Tab
[Connection manager "AcidPrd.basketUser"] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "ASE OLE DB Provider" Hresult: 0x80004005 Description: "Login Failed. Check for valid user ID, server name and password.". An OLE DB record is available. Source: "ASE OLE DB Provider" Hresult: 0x80004005 Description: "[Native Error code: 4002] [DataDirect ADO Sybase Provider] Login failed. ".
Can anyone help.
Thanks,
Jon
View 6 Replies
View Related
Nov 10, 2006
Hello
I am using XML config file to store the values e.g. Server name.... it runs fine with BIDS (Development enviroment)... but when I deploy and run it to test that XML config files values are being read by e.g. giving the wrong server name, it runs fine (may be retrieving some old values). then I come bak and test it again in the development enviroment to test, it fails ( as it supposed to be caz server name is wrong in config file)
can ne one tell me wr is the problem?
ur help and support is appreciated
regards,
Anas
View 1 Replies
View Related
Feb 12, 2008
<ReportItems>
<ReportItem Name="ProgressTracker" Type="Prologika.RS.Extensibility.ProgressTrackerCRI.ProgressTrackerRenderer,Prologika.ProgressTracker"/>
</ReportItems>
<ReportItemDesigner>
<ReportItem Name="ProgressTracker" Type="Prologika.RS.Extensibility.ProgressTrackerCRI.ProgressTrackerDesigner, Prologika.ProgressTracker"/>
</ReportItemDesigner>
What are the different parts of the reportitem name tag?
View 1 Replies
View Related
Apr 11, 2007
All,
I have several packages that all use the same DTSConfig file to map the OLEDB connections. This works fine in the development environment, however when i run a rebuild with Deployment set to true i get the error
Error 75
System.ApplicationException: Could not copy file "C:Dev_TFSTowergateTowergate.BdwTowergate.Bdw.Ssis.TransformPackagePath.dtsConfig" to the deployment utility output directory "C:Dev_TFSTowergateTowergate.BdwTowergate.Bdw.Ssis.TransforminDeployment". ---> System.IO.IOException: The file 'C:Dev_TFSTowergateTowergate.BdwTowergate.Bdw.Ssis.TransforminDeploymentPackagePath.dtsConfig' already exists.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.InternalCopy(String sourceFileName, String destFileName, Boolean overwrite)
at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CopyFiles(ICollection fileNames, String outputPath) --- End of inner exception stack trace ---
at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CopyFiles(ICollection fileNames, String outputPath)
at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CreateDeploymentUtility(IOutputWindow outputWindow)
The DTSConfig file is included in the project under Misc in the development studio as all developers need to have access to the same config file.
The net result is that the MSI deployment package doesnt get built so we cannot do an automated delivery of the data.
Is there a work round or a setting that i can implement to remove the error?
TIA
View 12 Replies
View Related
Oct 8, 2007
I have manually imported my packages into SSIS (via StoredPackages/FileSystem/Import Package command). How can I utilize a ConfigFile with this package? I see that the ConfigFile can be selected when it is run (in dtexecUI ), but it doesn't "stick", and is only used for that particular run.
How can I point this manually imported package to the ConfigFile so everybody who runs it doesn't have to browse for the ConfigFile every time they run it?
View 7 Replies
View Related
Mar 27, 2006
I'm currently trying to convert over packages from SQL 2000 to SQL 2005. The biggest obstacle at the start has to do with converting my "Dynamic Properties" control. I use it to read an .ini file and load the user name and password to my connections. With 2000 it's nice and easy 1 file 3 lines. While trying to convert it I€™ve had nothing but problems. I've tried the Registry Entry but it forces everything into the Current User and I can't use that I need local machine. There is no documentation and I can't have a xml file with 1000 different username and password settings because 1 person has to update that file with the new passwords. Any help would be GREATLY appreciated.
Thank You
Jerry
View 23 Replies
View Related
Mar 26, 2008
I have several SSIS packages, some of which retrieve data from excel files - they work fine from th VS designer until I try to store configurations in a SQL database - then I get the following error:
SSIS package "ITAMdiv2.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at ITAMdiv2, Connection manager "ExcelDIV2": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC020801C at Data Flow Task, Excel Source [84]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "ExcelDIV2" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "Excel Source" (84) failed validation and returned error code 0xC020801C.
any ideas?
Thanks in advance@!
Bob
View 1 Replies
View Related
Mar 9, 2007
I've recently uploaded my website, http://www.bigredsongbus.com, to my host. Unfortunately, they don't support the use of SQL Server Express. So, I've purchased an addon through my host - discountasp.net. I've attached my database file to their server, now all that I need to do is to change the connection string in my .config file so that it points to the SQL Server. I don't know how to do this. Any help, please?Jeffrey Way
View 2 Replies
View Related
