I have soma ado.net code that inserts 7 parameters in a database ( a date, 6 integers). I also use a self incrementing ID but the date is set as primary key because for each series of 6 numbers of a certain date there may only be 1 entry. Moreover only 1 entry of 6 integers is possible for 2 days of the week, (tue and fr). I manage to insert a row of data in the database, where the date is set as smalldatetime and displays as follows: 1/05/2007 0:00:00 in the table. I want to retrieve the series of numbers for a certain date that has been entered (without taking in account the hours and seconds). A where clause seems to be needed but I don’t know the syntax or don’t find the right function I use the following code to insert the row :
and the following code to get the row back (to put in arraylist):
“SELECT C1, C2, C3, C4, C5, C6 FROM Series WHERE (LDate = Today())� WHERE LDate = '" + DateTime.Today.ToString() + "'"
Which is the correct syntax? Is there a better way to insert and select based on the date?
I don’t get any error messages and the code executes fine but I only get an empty datatable in my dataset (the table isn’t looped for rows I noticed while debugging). Today’s date is in the database but isn’t found by my tsql code I think.
Hello i currently have a website that has an SQL server 2005 dbs that stores appointments. I would like to do a select statement in my sqldatasource that selects all the records that have an 'appointmentDate' more than 2 weeks after the current date (ie the system date). I am stuck on the SQL statement i need to produce to achieve this. I was thinking along the lines of SELECT * FROM appointments WHERE appointmentDate > System.Date + 14; However this is clearly not the right SQL statement. Any help would be appreciated. Many thanks, James.
SELECT RN_TEST_ID AS 'Test ID', MAX(RN_EXECUTION_DATE) AS 'Last Execution Date', MAX(RN_EXECUTION_TIME) AS 'Execution Time', RN_DURATION AS 'Run Duration' FROM RUN
1. The query should only return one record for each test id
2. The record returned should be the most recent. By most recent I mean the RN_EXECUTION_DATE and RN_EXECUTION_TIME of the returned row should be the most recent in time.
For example, in the sample data there are multiple rows with the same test id (for example 10668 and 10525. The 10525 is even more problematic since its execution date is the same for both rows returned - the execution times differ. Again, I want one record per test id and that record should be the most recent in time.
I have a table that has a DateTime column which uses a DataTimedatatype. How do I retrieve a range of records based on the month andyear using ms sql?Eugene Anthony*** Sent via Developersdex http://www.developersdex.com ***
I was wondering how you perform a select statement based on a specific date that will show all the records no matter which times belong to the specific date.
I have been having trouble with this one when using a single date, I think this is because of the time property as no records are displayed.
So let's say I have a table Orders with columns: Order# and ReceiptDate. Order#'s may be duplicated (Could have same Order# with different ReceiptDate). I want to select Order#'s that go back 6 months from the last ReceiptDate for each Order#.
I can't just do something like: SELECT * FROM Orders WHERE ReceiptDate >= add_months(date,-6)
because there could be Order#'s whose last ReceiptDate was earlier than 6 months ago. I want to capture all of the instances of each Order# going back 6 months from each last ReceiptDate relative to each Order#.
select custno, amt, balance from customer where custno='customerno' when showcust='r' then select rows where amt<balance when showcust='c' then amt>balance etc if showcust='' then show everything
I am trying to write a stored procedure that will select information from a SQL table based on a specific time. For example I have a name field and a time field, I want to return just the names that were created between a specific time frame. ex between 3pm and 4pm. Any thoughts?
I have written a merge Statement where i am facing trouble to delete the data basing on Where Clause Condition.
1) Case 1 : For example i have inserted Data from Source to Target based on Date Key Condition.Take an Instance 10 Records Inserted. 2) Case 2 : For example some changes in the records and it has been updated through the Merge Statement . 3) Case 3 : For the Same Date key based on Conditions now three records has came and need to be inserted and rest should be deleted for that Date Key.
How i need to proceed on this before 10 records are not getting deleted and new records adding for that one
My Example Code :
MERGE INTO TargetTable AS Target USING ( SELECT DISTINCT Col1, Col2 FROM Table1 AS cga ) ON dad.AnchorDate = CASE
The following is the sql being executed in my Crystal report. There seems to be an issue with the same date request. Sometimes it shows data, other times not. We have data every day, we are a mass market company. Is there anything i can do for the sql to do select when from and to dates are the same?
SELECT "OEHIS1"."ODORD#", "OEHIS1"."ODORDT", "OEHIS1"."ODNTU$", "OEHIS1"."ODSHP#", "ICPRT1"."IARC11", "OEHIS1"."ODORDD", "ICPRT1"."IARCC4", "OEHIS1"."ODQTY#", "OEHIS1"."ODRQSD", "MFHHMH"."MHAWGT", "OEHIS1"."ODPRT#", "OEHIS1"."ODPRLC" FROM ("S10M10"."ASTCCDTA"."EODDETAILS" "OEHIS1" INNER JOIN "S10M10"."ASTDTA"."ICPRT1" "ICPRT1" ON "OEHIS1"."ODPRT#"="ICPRT1"."IAPRT#") INNER JOIN "S10M10"."DLIB"."MFHHMH" "MFHHMH" ON "OEHIS1"."ODORD#"="MFHHMH"."MHORDP"
SELECT TOP (100) PERCENT StockCode, Warehouse, QtyOnHand, QtyAllocated, QtyOnOrder, QtyOnBackOrder, DateLastSale, DateLastStockMove, DateLastPurchase FROM dbo.MBL_VW_AgedStock_Sales ORDER BY StockCode
This basically shows a list of stock codes (there are multiple stock codes the same) and the last sold date. What i need to do is group the stock codes which are the same together, and show the latest date.
When im using the below query im getting the output, but when i change the starting date to 2006 I'm not getting the data for 2007 though it falls between the 2006 and 2008 range...
select * From dbname..tbl where date>= '03/jan/2007' and date <= '11/feb/2008' and Status= 'C' and ID is not null
AND (ACCOUNT = '25869' or ACCOUNT = '0' + '25869' ) Check and post your comments ASAP...
What I am trying to do: Obtain attendance percentages for schools for the last five days. The outcome would look like this:
DISTRICTGROUPING, SCHOOLNAME, 5 DAYS AGO PCTG, 4 DAYS AGO PCTG, 3 DAYS AGO PCTG, 2 DAYS AGO PCTG, 1 DAY AGO PCTG I am using nested subqueries for each day as follows: (total enrollment-total absent/total enrollment) ,( ((SELECTCOUNT(*)--GET TOTAL ENROLLMENT COUNT FOR SPECIFIED DATE
[Code]....
The query works with the following exceptions:
My issues are:
1. Avoid the "division by zero" error. This can occur if a school is closed for a day or if a smaller school has no absences for a day.
2. Avoid weekend dates. I need the query to display only weekdays
3. Currently I am using "PERCENTAGE 5: as a column header whereas I need the actual date as the header.
Hi :From a crystal report i get a list of employee firstnames as a stringinto my store procedure. Why is it comming this way ? hmmmmmm it's aquestion for me too.ex: "e1,e2,e3"here are my tablestblProjectsProjectId123tblEmployeeemployeeId FirstName1 e12 e23 e3tblProjectsToEmployeeProjectId employeeId1 11 21 32 12 23 13 23 34 14 3i need to find out the project ids all 3 of these employees worked on.so the out put i need isprojectId13How can i get it ????????????now i can use replace command to format it to a OR clause or ANDclauseSET @string= 'employeeId =' + '''' + REPLACE('e1,e2,e3',',',''' ORemployeeId = ''') + ''''some thing like this.OR clause will give me all 4 projects.in('e1','e2','e3') will give me all 4 projects.of cause AND command will not give me any.other method i tried was adding the employee table 3 times into thesame SQL string and doing some thing likeWHERE (empTable1.Firstname ='e1' AND (empTable1.Firstnamein('e2','e3'))AND (empTable2.Firstname ='e2' AND (empTable1.Firstname in('e1','e3'))AND ...and goes alone. this gives me some what i needed. but it's a verymessy way of doing it, because i get a comma seperated stringparameter i have to construct the sql string on the fly.any help or direction on this matter would greatly appreciated.thankseric
I need to send an email when my 'LastRunDate' field is 30 days old (i.e. It should send an email if the LastRunField = 7/21/2007).
I would need to include the matching fields in the database (i.e. MachineID, Description, etc.) then update that field to todays date.
I have a few values in the 'Frequency' field such as Daily, Monthly, Yearly. Daily would be 24 hrs, monthly 30 days, yearly 365 days from the lastrundate.
FirstName | LastName  | DateofBirth ----------------------------------------  Thomas  | Alva Edison |  10-10-2015  Benjamin | Franklin   |    10-10-2015  Thomas  | More       |    11-10-2015  Thomas  | Jefferson  |   12-10-2015
Suppose today's date is 09-10-2015 in (dd-MM-yyyy format), I want to perform a query in such a way that I should get the data from the table above WHERE DateofBirth is tomorrow, so I could get the following result.
FirstName | LastName  | DateofBirth ----------------------------------------  Thomas  | Alva Edison |  10-10-2015  Benjamin | Franklin   |    10-10-2015
Okay, let's see if I can explain this one. I am summing multiple lines of data from a labor detail table, by status. Using this query
SELECT EM.Lastname, LD.WBS1, LD.WBS2, P.Longname, SUM(LD.Held) AS HELDLABOR, SUM(LD.TBWRittenOff) as TBWrittenOffLabor, SUM(LD.WrittenOff) AS WRITTENOFFLABOR FROM PR P INNER JOIN (SELECT WBS1, WBS2, SUM(CASE WHEN BillStatus = 'h' THEN Billext ELSE 0 END) AS Held, SUM(CASE WHEN BillStatus = 'w' THEN Billext ELSE 0 END) AS TBWrittenOff, SUM(CASE WHEN BillStatus = 'x' THEN Billext ELSE 0 END) AS WrittenOff FROM LD WHERE BillSTatus IN ('x','h', 'w') GROUP BY WBS1, WBS2) LD ON p.WBS1 = ld.wbs1 AND P.WBS2 = LD.WBS2 INNER JOIN EM ON p.ProjMgr = EM.Employee WHERE p.Status IN ('a', 'i') AND P.ChargeType = 'r' GROUP BY EM.Lastname, LD.WBS1, LD.WBS2, P.Longname ORDER BY EM.Lastname, LD.WBS1
I get these results...
LastnameWBS1WBS2LongnameHELDLABORTBWrittenOffLaborWRITTENOFFLABOR Boulet0001039.000100S.r. 41 & Del Prado Shopping Center/miscellaneous civil engineering18408.6309923.47 Boulet0001039.000102S.r. 41 & Del Prado Shopping Center/rezoning process008790 Boulet0001039.000106S. R. 41 & Del Prado Shopping center / const plan rev for environ planting2200.6800 Boulet0001039.000107S.r. 41 & Del Prado Shopping Center/cpd rezoning9335.4600
Okay, so now, of coarse, I want to change everything. I only want to return rows if there is a value > 0 in either Held Labor or TBWrittenOffLabor. Otherwise, no row return.
Here's what I tried, but it didn't work out because it still returns rows, it just zero's out the values for written off labor.
SELECT EM.Lastname, LD.WBS1, LD.WBS2, P.Longname, SUM(LD.Held) AS HELDLABOR, SUM(LD.TBWRittenOff) as TBWrittenOffLabor, SUM(CASE WHEN LD.HELD > '0' THEN LD.WrittenOff ELSE '0' END) AS WRITTENOFFLABOR FROM PR P INNER JOIN (SELECT WBS1, WBS2, SUM(CASE WHEN BillStatus = 'h' THEN Billext ELSE 0 END) AS Held, SUM(CASE WHEN BillStatus = 'w' THEN Billext ELSE 0 END) AS TBWrittenOff, SUM(CASE WHEN BillStatus = 'x' THEN Billext ELSE 0 END) AS WrittenOff FROM LD WHERE BillSTatus IN ('x','h', 'w') GROUP BY WBS1, WBS2) LD ON p.WBS1 = ld.wbs1 AND P.WBS2 = LD.WBS2 INNER JOIN EM ON p.ProjMgr = EM.Employee WHERE p.Status IN ('a', 'i') AND P.ChargeType = 'r' GROUP BY EM.Lastname, LD.WBS1, LD.WBS2, P.Longname ORDER BY EM.Lastname, LD.WBS1
I have a table here.  I want  find a way of getting the latest date, when the code is the same.  If the Declined date is null.  Then I still want the latest date.  E.g. ID 3. Â
If the declined date is filled in. Â Then I want to get the row, when the Datein column value is greater then the declined date only.
I tried grouping it by max date, but  i got an error message when trying this out.  Against the code Â
WHERE MAX(Datein) > Declined
An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference. Â What do I need to do to get both my outputs working?Â
In the below scenario we are inserting some time related fields in Temp table.But its data type is varchar. Once data loading is finished in the temp table (Data is loading by source team SQOOP and they are unable to load if the source datatype is having Date or datetime) we have to alter the column datatypes. somehow, some character data in inserted in date columns (look at into 3rd insert statement). while altering the table it is failing. Can we do any alternative for this (Means if any varchar data that is non convertible to date can we make as null)
INSERT INTO ##TEMP_TEST SELECT '2014-09-30','2017-10-06','Nov  6 2014  6:11AM','Nov  6 2014  6:11AM' UNION SELECT '2014-09-29','2017-10-06','Nov  6 2014  6:11AM','Nov  6 2014  6:11AM' UNION SELECT '2014-09-28','2017-10-06','Nov  6 2014  6:11AM','Nov  6 2014  6:11AM' GO INSERT INTO ##TEMP_TEST SELECT NULL,NULL,NULL,NULLÂ
Hi! I have a table Tbl1 has to columns: A B _________ Ibm Me Sony Me Me Bob Me Frank I'd like to select all rows where B=ME and A=Me Thanks for the help
Hi there, im still learning SQL so thanks in advance.I have a table with columns of customer's information, [customerID], [customerFirst], [customerLast], , [program] ... other columns ... There will be entries where there can be duplicate customerFirst and customerLast names. I would like to just return a single entry of the duplicate names and all associated row information. IE: [customerID], [customerFirst], [customerLast], [ email], [program] 01 Bill Smith bill.smith@hotmail.com ymca 02 Bill Smith bill.smith@hotmail.com Sports 03 jon doe jon.doe@hotmail.com AAA 04 jon doe jon.doe@hotmail.com Ebay 05 Paul Sprite paul.sprite@hotmail.com Rec Desired Returned result: 01 Bill Smith bill.smith@hotmail.com ymca 03 jon doe jon.doe@hotmail.com AAA 05 Paul Sprite paul.sprite@hotmail.com Rec So in my code i have this:dAdapter = new SqlDataAdapter("SELECT * FROM [Poc_" + suffix + "] WHERE (SELECT DISTINCT [CustomerLastName], [CustomerFirstName], [CustomerEmail] FROM [Poc_" + suffix + "])", cnStr); dAdapter.Fill(pocDS, "Data Set"); However this is throwing up an error when i build the app: An expression of non-boolean type specified in a context where a condition is expected, near ')'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An expression of non-boolean type specified in a context where a condition is expected, near ')'.
Source Error:
Line 52: //dAdapter = new SqlDataAdapter("SELECT DISTINCT * FROM [Poc_" + suffix + "] ORDER BY [CustomerLastName]", cnStr); Line 53: dAdapter = new SqlDataAdapter("SELECT * FROM [Poc_" + suffix + "] WHERE (SELECT DISTINCT [CustomerLastName], [CustomerFirstName], [CustomerEmail] FROM [Poc_" + suffix + "])", cnStr); Line 54: dAdapter.Fill(pocDS, "Data Set");Line 55: Line 56: //Dataset for name comparison 1: Can someone explain to me why this error is happening?2: Can soemone confirm that my intentions are correct with my code?3: If I'm completely off, can someone steer me in the right direction?Thanks alot!-Terry
I have inherited a query which currently returns multiple instances of each work order because of the joined tables. The code is here and I've detailed the criteria needed below but need the best way to accomplish this:
Each work order should only be returned once, and with the following additional criteria:
1. i.meter - this should return only the lowest number from that file.
2. sm.next_calendar_date - this should return only the most recent date out of those selected for the certificates on this piece of equipment
3. wh.meterstop as [Last Service Hours], wh.date_created as [Last Service] - this should return the number from wh.meterstop at the most recent wh.date_created for that piece of equipment.
This is a simple one, and I know that it has to be fairly common, but I just can't figure out an elegant way to do it. I have a table with the following fields: OrderID (FK, not unique) InstallationDate (Datetime) CreateDtTm (Datetime)
There is no PK or Unique ID on this table, though an combo of OrderID and CreateDtTm would ostensibly be a unique identifier.
For each OrderID, I need to pull the InstallationDate that was created most recently (based on CreateDtTm). Here's what I've got so far, and it works, but man is it ugly:
SELECT a.OrderID, InstallationDate
FROM ScheduleDateLog a
INNER JOIN
(SELECT OrderID, max(convert(varchar(10),CreateDtTm,102)+'||' +convert(varchar(10), InstallationDate,102)) as TopRecord
FROM ScheduleDateLog GROUP BY OrderID) as b
ON convert(varchar(10),CreateDtTm,102)+'||' +convert(varchar(10), InstallationDate,102)=b.TopRecord
I need to list all the records in Table2 which don't have matching field values in Table1.
This the the exact opposite of what I need: SELECT DISTINCT Field1, Field2, Field3, Field4, Field5 FROM [Table1] WHERE EXISTS( SELECT DISTINCT FieldA, FieldB, FieldC, FieldD, FieldE FROM [Table2] )
The above seems to give me all records in Table1 in which the five fields match the five fields specified in Table2. What does not show up is the test record I put in Table2 which is not in Table1.
What I need, however, is the exact opposite.
I tried the above using NOT EXISTS but I get no records at all.
i want to write a stored procedure where i pass column names a parameters and i want to get result based on that For ex:- if i pass the parameters as col3 and col5 where id =1 then i should the result as
id col3 col4 col5 1 3 4 5
and if i pass input as col2and col6 where id =3, the result should be id col2 col3 col4 col5 col6 3 4 8 2 6 9
I have a report with a date type parameter. Depending on the value return by this date type parameter the dataset will return either the credit, deposit or process date. How do I go about coding it so that it will dynamically select the right column in my query for my dataset?