Mapping Network Drives To Access Saved Files
Aug 4, 2015
I am using two computers at home one with windows vista 32bit and the other with windows 10 64bit both are home versions. I want to map the drive on my win10 machine to access my saved files and wanna share from my vista one but when I do it I cannot connect to it because it my windows 10 machine doesn't have the same user and pass but that's irrelevant I guess because no matter what use/pass i use it says this drive is mapped to another user/pass even though there is only 2 accounts on the pc that i have access to and have full access to the shared drive.
I have password protection off for the vista machine because it would be stupid to have to use a password to print since my printer is shared just fine and I can print from any pc. Everguid I use is just not detailed enough I have tried using different credentials bt they don't work.
View 1 Replies
Similar Messages:
Aug 17, 2015
I am having problem adding folders from a network drive to the Quick Access.
Firstly I can only drag and drop into the QA in explorer, as right clicking option doesn't work and it only allows one folder at a time to be included. Local folders are not a problem and any number can be included in QA.
Also pinning files to taskbar apps has a similar problem if they are on the network drive.
View 9 Replies
Mar 5, 2016
Error code 0x80070035
I have two computers that I'm trying to get to communicate with each other so I can move files back and forth between them. My plan is to make one of them the home's backup and main storage system. the problem is that I can only seem to get one of them to actually communicate equally. Computer 1 is a factory Lenovo Intel i3 computer. Computer 2 is a home made AMD that I just built a few weeks ago.
Both are running Win 10 Pro.
Both are physically attached to the router. Heck, they're physically stacked on each other on my desk....
Using File Explorer, on the left side Panel under Network, it shows both computers: AMD and Lenovo.
Computer 1(factory) is able to the files on Computer 2 easily by going over through File Explorer. But, if I click on one of the files, I get the message that I DO NOT HAVE PERMISSION. If I try to cut/Paste files from Computer 1 to computer 2, I get the same message.
Computer 2. I am also able to see the computer listed under Network in the left panel. When I click on Computer 1 to access it, I get a Network Error Windows cannot access Lenovo (Computer1) Error code 0x80070035
I've tried the Diagnose option and it doesn't work.
If I click on a Drive under Network on the very computer, I can see the drives, I can see the directory list. If I click on a file, I get the error. Example on the left side panel on my AMD computer I select:
>AMD
>C:
>PerfLogs
It's at this point that I get the error: Windows cannot access amdcPerfLogs as an example
I've tried running through Homegroup setup and Googled for days on setting up a network with Windows 10 and can't seem to figure out what I'm not doing here to make these computers talk and communicate with each other. I eventually, want to get all my computers to talk to the AMD so I can use it for a main storage/backup for the home network.
View 1 Replies
Jan 16, 2016
I just did the free Windows 10 update on my computer and now files that had been saved to my computer for quite some time seem to have disappered
View 1 Replies
Jan 18, 2016
I downloaded 7-zip and am trying to compress a sound file and my system saves the file to PDF Adobe format. This means that I cannot open the file.
I have tried uninstalling and reinstalling 7-zip but it isn't working.
View 3 Replies
Oct 24, 2015
I would like to upgrade to windows ten but i have a lot of files saved on my computer that i would like to keep. Will Windows save them when I upgrade?
View 2 Replies
Aug 6, 2015
My hard drive shows 20 more GB of space but everything is gone that I used or saved on the computer. I did not back up everything since the info I read said I would not loose this information.
Is there any way to retrieve it or roll back the hard drive to Windows 7 and retrieve the data I lost?
View 24 Replies
Nov 24, 2015
My internet worked fine and I didn't do any changes to it up until it stopped working. I've managed to fix the internet access to allow me to access the internet on my laptop through wi-fi but network access still says no internet access. Websites work however ethernet does not work! I can't connect online on my playstation because ethernet doesn't work. I've tried disabling and enabling the ethernet. I checked the cables, I re-installed the drivers and i turned off and on the router more than I could count.
The internet works on my laptop however a connection test on my playstation 3 says obtain ip address succeeded and internet connection failed. So I can't play online. I am absolutely certain the playstation 3 is not fault as I checked vigurously the settings and I've put in the right connections, however it still does not work? Should I buy new cables for the router?
View 8 Replies
Aug 27, 2015
When I try to attach word docs to emails, a small compact screen opens and only shows 5 documents. There should be 100's... When I close email and search docs, they all appear normally.?
View 1 Replies
Apr 13, 2015
it was working back on 10049 and then i updated to 10051 and it still was working fine. but recently i did a fresh install and now i can re add a network device
i have a "New" Nintendo 3ds and i cant setup the MicroSD management which requires you to add it as a network drive
like N3DS
in the network tab i can see it but when i click it it says
windows cannot access N3DS
error code 0x80070035
the network path was not found
upon clicking troubleshooting the problem says
the remote device or resource wont accept the connection..
View 9 Replies
Dec 8, 2015
So I just turned my computer on and noticed that my desktop had been reset to the default wallpaper and all of my folders had been deleted. I also realised that my documents and pictures had been deleted. I tried to run a game and my save files had been deleted.
I restarted my computer and everything was normal.
Is this an issue computer or just Windows 10 in general?
View 1 Replies
Aug 22, 2015
Access is denied on both drives. Just upgraded about an hour ago and I've been looking for solutions but cant seem to find any that works for me. I'm only using one account and its a Local(Administrator) account. How to give full free unhindered access to everything. Since this is my laptop and no one is going to ever use it except for me.
View 1 Replies
Apr 1, 2016
I recently upgraded my PC to windows 10 and every since have been unable to access any USB external drive. The laptop picks up the drives and acknowledges that they are there and working but they do not appear in file explorer. I have looked in disk management and the drives are there and healthy. The USB ports work 100% as i have plugged in keyboards etc to test and all the drives i've tried work with other computers. I've reinstalled windows twice. Ran various disk cleanup utilities, checked for hidden drives etc.I need to upload video files to my laptop to edit for work.
View 2 Replies
Jan 3, 2016
We have 2 desktops, 2 convertibles and an hp tablet. We started with total mess network wise - tried most of the fixes and none really worked. I removed homegroup and started over making sure ALL units were in homegroup and still had problems. After many tries of fixes etc. I discovered two of the units were in different workgroups??
We are finally able to see all computers on all the computers but are left with two network drives which show up as media units but never show up and available in the computer area on all computers. Both show up fine on my desktop but never on any of the other units.
Have rebooted, checked settings and what to check now. We have used networking of some sort for years and depend on it - have been without it now for way too long.
View 3 Replies
Sep 19, 2015
I have some harddrives on a "server" computer in my home-network running win 7. From my "client" running windows 10 I am mounting these drives using
psexec server -u username -p password -d net share F=F: /GRANT:user,Full /GRANT:media,read 2>nul
net use F: serverF
Today my client crashed and I had to remove the graphics card. Since then I cannot enter my network drives anymore, the commands seem to run, but when I try accessing the drives I get a message indicating I should put a media into these drives. Also, I cannot mount them manually using "map network drive" since the drive letters are not available.
I tried removing them from HKEY_LOCAL_MACHINESYSTEMMountedDevices (they are listed there as "DosDevicesF" etc.), but once I restart, they are there (in the registry) again.
how I could fix this? Win10 somehow seems to remember that thes drives once have been there before and keeps blocking the drive letters...
View 1 Replies
Nov 21, 2015
Well I thought I had this problem solved! I had the same exact issue running Windows 7 so I upgraded to 10. It worked for a few times and now each time I restart, the 3 mapped drives I have show the dreaded RED X. This pc worked perfectly prior to me installing a new Samsung SSD after cloning my OS.
I have a Synology NAS connected via Ethernet and have 3 mapped drives to it (each a separate folder, one for music, movies, and pics). All I have to do is double click the mapped drive and it open right away and the Red X disappears until the next reboot.
Any solid solution or a bat file that will fix my issue? I am not saavy when it comes to this type of thing. I need the mapped drives to work upon startup being I use this pc to load XBMC / Kodi for video playback. Kodi is in my startup folder and when the pc boots up, in Kodi I cannot access the files being the mapped drives are not accessible until I click them. Its a PITA...
This pc is in the basement and I rarely go down there so I boot it up via a WOL app and never have to touch a thing on it hence my dilemma!
Is it possible the SSD loads to quickly and the mapped drives are not visible yet?
View 5 Replies
Feb 4, 2016
Installed Win 10 on network client. I have 8 mapped drives from the server and on a regular basis 1 or more of drive are lost. They come back on their own usually a short time later. This causes major headaches when programs using files on the drives lose the connection while files are in use.
View 1 Replies
Feb 10, 2016
Starting with the Redstone insider previews, my HP mediasmart home server works for automatic backups, and I can open the server console to manage the server. But it is impossible to map a folder on the WHS to a drive.; none of the shared folders on the WHS are visible, and the homes server is not visible under network. Troubleshooting indicates a missing protocol, but has no solution. Everything works fine on the no-preview PCs on the network. I am concerned that MS is abandoning the WHS and am worried about future official updates.
View 5 Replies
Jan 10, 2016
I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
View 9 Replies
Nov 8, 2015
Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.
IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.
Fixed. Updated drivers worked. Just had to restart a couple times for it to work.
View 9 Replies
Nov 8, 2015
my Windows 10 Enterprise PC cannot access to my company's network storage at 10.63.0.250. In the previous edition like windows 7 or 8, I can access easily by enter 10.63.0.250 in the Address box in File Explorer or in Run windows (Window button + R). However, I have got trouble since I upgraded to Window 10. The notification is "The network path was not found", although I can ping to this and another PC can access the network storage in File Explorer.
View 8 Replies
Nov 26, 2015
After the latest Widows pro 10 update I am unable to access my home network drives. Both the Synology and Buffalo drives were accessible but now are not viewable from the desktop.
View 3 Replies
Aug 7, 2015
So I have my computer connected to my laptop via Ethernet cable this is how I get Internet access to my pc usually it shows my network name and that I am connected to the Internet. just this morning I upgraded my pc from 8.1 to 10 and ever since my network says unidentified and limited access I updated and installed all the drivers for my motherboard including lan I also tried manually putting tcp/ip and it still did not solve my problem so I switched it back to automatic but no luck .
View 1 Replies
Sep 10, 2015
I have just copied all my files from google drive to one drive. In Windows 10, where should I copy them so as to have a master file that will automaticly sync them to the foregoing drives?
View 2 Replies
Oct 10, 2015
I have a desktop and a laptop setup at home, I have recently upgraded both to Windows 10. Both were previously running Windows 7 Home Premium and could identify each other on the network and I could access files on either PC from one or the other at any time.With the upgrade to Windows 10 I am still able to see the other machine on the local network, but I am unable to access their folders and move files between machines. The error message I get is as follows.When I run the network diagnosis no errors are detected and it asks me if I want to explore other options.
The full error message is:I do have shared libraries available across both machines that are part of my homegroup, so I can access the video files in the hard drive of my desktop from my Laptop but only to play them - not to move them around.I suspect this is either a user validation issue, or a firewall issue and I'm not sure how to go about checking whether this is the case or not.
View 6 Replies
Aug 9, 2015
On my desktop (AKA S4, currently running Win8.1 x64 pro) I have shared out four of the hard drives with full permissions. I have 5 PCs in my network and all can access the four drives. My sister is visiting and currently accessing my network via cat5 wire. On her PC (running Win 10 x64 pro) if I view the network in Windows Explorer I can see my desktop (S4). When I double-click on S4 I'm prompted to enter network credentials. "Enter your credentials to connect to: S4" I entered my logon S4 ID and password but it tells me that the user name or password is incorrect. What the heck should I be entering? All computers are part of the same work group (WORKGROUP) and all computers are wired connected. All computers can access the internet.
View 9 Replies
