Hello to everyone,
I have a colleague who executes a make-table query that reads a txt file. While doind this, he wants to convert two columns (binary format) to checkboxes (Yes/No format). Is there a way to do that?
Thanx in advance
In my checkbox named Taxable I have the following in the afterupdate
Private Sub Taxable_AfterUpdate()
If Me.[Taxable] = True Then
Me.[Tax] = 0.06
Else
Me.[Tax] = 0
End If
End Sub
This will only insert whole numbers in the Tax field as I have tried several
combinations of numbers. How can I get Tax = 0.06?
I have a make table query created from a linked to a table. i want to add field to the make table query that are not fields on the table. How do i insert a created field? Hopefully this is a basic question.....
View 1 Replies View RelatedDB Setup:
Table1: I have a table (Vendor) that has 2 fields (# & Name) with # being an AutoNumber. So only Name is being input via a form. I have formatted the autonumber field as 000;(000).
Table2: A table that is populated via form with invoice info etc and vendor number is added through a drop down combo box (which also has the above format on it)
Table3: Similar to table2, with slightly diff info but still vendor #
Query1: Is a make table that consolidates table 1 & 2 via union on like fields (ie vendor #) This make table also has the format from above in its properties field, although when i open the table it makes (Table4) the vendor field is not formatted as i need it. So 3 appears as 3 not 003.
Query2: takes table4 adds some extra info and exports file (as txt or xls)using outputTo & TransferText macro so that it can be loaded into a Hyperion Essbase system
My problem is that although the field value is formatted as 003 in appearance, when i take it to excel it changes back to 3 when i need it to stay as 003. I would like the make table query to also format the tables field as 000. Is the problem with the autonumber in the orig table or is it simply excel being stubborn when i take it there. If i changed the vendor field to text string in the make table would i still be able to link it back to the orig vendor table to get the names etc (ie number field linked to text field??)
Thanks in advance
Hi all,
stumped on an issue I thought would be pretty straight forwards (again) so i'm hoping to find the answer here! I have a make table query which produces the table using fields from three other tables and it runs fine however I now want to insert a new field with the value "Current" in it, and, if possible, an Autonumebr ID field as primary key. I'd like this is all done in one query so not sure if it will fly but if anyone can advise me I know someone from here can help.
Thanks in advance,
Mitch......
I have numerous databases that I use with make tables in there, these will often contain Currency values that we need to be set as just General Numbers. We can get it to work in the Query but whenever we run the query, the table it makes always shows up as currency.
Is there a way so that the table created will automatically be just General numbers...
I am extracting information from a datawarehouse with a make table query. I will run this queary one time to create the table. Then I plan on creating an append queary to extract the same fields on a weekly basis. I want to keep track of the datasets that i extract weekly. I thought I could create a field with a julian date or the week of the year. Does anyone know how I could create this field in my append queary? OR any thoughts on how i can keep track of the records appended each week?
View 3 Replies View RelatedIn Access, when using Look Up function, Table/Query, how do I make more than 1 field from the query appear in the drop down list?I will be doing the same thing for students and some other tables. But for this example I am only wanting to show instructors first and last name and their ID number in the drop down.
I am using
Code:
SELECT instructors.first, instructors.last, instructors.ID FROM instructors;
in my Classes table.
What am I doing wrong?
I would like for it to show their instructor first and last name but actually put the ID in the field as I will be using that key for various relationship based functions. Show the first and last name to the person who will be using the database, but actually put the ID in the field so I can use it as a common field across other tables.
I'd like to know how to add a blank filed (memo), called "comments" that is not pulled in from any existing table, in an existing maketable query which is getting it's fields from different linked tables , so that the destination table that comes out of this query, has all those data along with an extra column for me to add comments.
View 5 Replies View RelatedI am creating a table, using an INTO statement.
I require a blank numeric field, which users will be updating via a form.
How do I make the field numeric, as my current script makes it a text field
'' as Ticket_No
And you can't cast/convert text to numeric ....
I am creating a table, using an INTO statement.
I require a blank numeric field, which users will be updating via a form.
How do I make the field numeric, as my current script makes it a text field
'' as Ticket_No
And you can't cast/convert text to numeric ...
How the value is stored on a Yes/No check box in the table. I need to check to see if it is checked to perform some calculations.
View 8 Replies View RelatedI have 2 tables both linked to SQL Server 1 has policy information and the other has error information both tables are linked with the relationship policy Ref. The error table(table2) has fields Pol ref, Error_Type,error, Comments, response_comments and response_Date.
There are 25 types of error so what I have done is copy all fields from table 2 25 times exlcuding the policy ref and Error_Type but to make them relate to the relevent error I need to setup some VBA code that does an if Error1_checkbox is ticked then make Error_Type ="error1" and Error=1 else if error1_checkbox is unticked then make error_type null(blank).
I am using ACCESS 2010....
Dear All:
I have a checkbox called "display_field" and a textbox called "Amount".
Any ideas on how I can make the textbox invisible when I place a check in the checkbox?
thanking in advance,
Dion
Im constructing a form with check boxes next to names. Id like to have the checked names input serially into a single table field like:
IssuedTo
Name1, Name2, Name3
There are 8 possible Names. Is there way to do this without a long complicated If-Else-Then function?
I have a form with a Yes/No checkbox. Sometimes a data entry person will use this, sometimes an associated report is printed and a technician in the field will be required to fill check the box by hand and return the report for data entry. what I have tried to format the check box, if the box isn't already checked, I can't get it to show up clearly on the printed report. It's set to Visible, width 6pt, solid, black, always display, yet it still is barely visible. Ive tried increasing the grid line thicknesses, making it shadowed, nothing seems to work. Is there anything I can do?
View 9 Replies View RelatedI have combo box call "supervisor" and check box call "supervisorchange" basically want to make supervisor change to true if combo box is change which I have made code you can see below it work's
Code:
Private Sub Supervisor_Change()
If Me.Supervisor = "" Then
Me.SupervisorChange = False
Else
Me.SupervisorChange = True
End If
End Sub
right now my problem, prob easy fix for you access experts
If the supervisor combo box is empty and user inputs a supervisor I would like the supervisor change check box not to change to true
only if the user changes it after the first input I would like the supervisor change check box to become true
I'm creating a database that keeps a track of questions and scores.
The questions in the database need to be dynamic and are changed frequently.
I have a scorecard table which keeps a record of scores and the applicable question at the time the record was saved. I need to do this because in 6 months time we may want to provide feedback. As the question may have changed we need to be able to refer back to what the question was.
I want the question field in my scorecard table to populate with the value in my question table.
I have tried a number of things including setting the question field in the scorecard table to a lookup based on the following query:
SELECT tblQ1.Q1
FROM tblQ1;
This works however only as a list or combo box. I don't want the user to have to select the question. I want it to auto populate, is this possible?
Table1 contain Two fields (3Months) and (6Months)
Table2 contain Two fields (3Months) and (6Months)
the table 2 is the source of a form that will let the user change the numbers. table 1 should change Date1 and Date2 Fields based on the two fields (3months) and (6months) if i want to make a lookup wizard it should be changed manually and if i make a calculated field i can't find other tables in the expression builder
Dear All:
I have created a form with students information, name, address, ID number, etc.
Is there a way to place a checkbox on this form that when it is checked, it displays text on a SPECIFIC AREA ON A REPORT?
I wish it to return this text on a report: "HONORS COLLEGE"
Many thanks in advance,
Dion
Dear All:
I have created a form which contains names, address, DOB, etc. On this form there is a checkbox. I wish to place a command buton on this form that when clicked, it will clear the checkbox that corresponds to each record.
Any ideas?
Thanking in advance,
Regards,
Dion
I have some code that creates queries based on a value in a checkbox.
So, depending on that value, the queries may or may not exist.
I need to take those queries (if the exist) and create one union query.
This code creates the first query beautifully, but it won't union the second query.
Code:
Private Sub cmdSubmit_Click()
Dim blnQueryExists As Boolean
Dim cat As New ADOX.Catalog
Dim cmd As New ADODB.Command
Dim qry As ADOX.View
blnQueryExists = False
[Code] ....
I have what is probably a stupid question but I've been struggling with this one for a while. I have an ordering database which has an Orders table (containing Order ID, Date, Supplier etc) and an Order Line table within which I have a combo box for Product name, supplier, price, VAT rate, Line price etc. At the moment, I have the order line table as a subform within the Order form (run from the Orders table). The problem I'm having is the subtotal and total fields. At the moment these are in the Order Line table as I cannot figure out how to get these in the Orders table. In summary, can I make a calculated field in one table that calculates values from another table (linked by Order ID)?
View 3 Replies View RelatedI need to update a checkbox in a core table from a temp table. How can this be done?
View 2 Replies View RelatedI am using Access 2010 and I have my tables hidden in the navigation pane (I don't have any concerns about users finding the tables to make edits), however I am looking to "lock" all fields on a form once a user saves the record. The concern is that when they go to enter a new record they may end up on a previous record and overwrite the information. My thought was to create a checkbox on the table that I can edit each week to lock records. At that point, what type of code can I create or use that will lock records on the form?
View 2 Replies View RelatedI have some VBA code that generates a query and saves it. The query is a list of people who will be sent a communication along with the formatting for the communication. After producing the query I want to look through it and decide if there is anyone I don't want to send the communication to. I can't delete records from the query without deleting them from the database or I would simply do this.
I thought I could add a checkbox in the query that I can tick to stop a communication being sent to that person. I only want the setting saved within the query and then when I have finished it be deleted along with the query.