Form Clicking Requires 2 Clicks To Go To Next Record!?!?
Feb 20, 2007
Hey Readers,
I'm using MS OFFICE 2003...MS ACCESS
I am having a problem in my one form where I have to click on the "go to next record arrow" twice before it displays the next record. (even on the "create new record" it requires 2 clicks)
All other forms I have display the next record for only a single click on the arrow.
Is there something unique in the properties of the form in question that needs to be changed so that a single click displays the next record?
I have a form "IntUnderwriterSearchByName" which is based on the query "Search by Name". This form opens with a parameter (please enter name of broker) and is set out like a datasheet with the following fields- "Broker Name", "Domicile", "Broker Code" and a couple of others. I'd like to be able to click on a record and open the form "IntUnderwriterPopUp" so that the details of that specified record are displayed.
Broker Code is what I'd like the form to look for and this Broker Code is unique for every one of the 900 or so records. This code can be numerical e.g. 01233 but also can be a mixture of both e.g. EU2885. It is also worth noting that this code is not the primary key- i have an autonumber (called ID) that does this- but this field does not appear on the form.
I am creating an events database. In my main form, I have all the details of a single event (billing code, fees, customer, support personnel, etc.). Then, I have a subform (form view) that lists each of the other services which share an event ID (this ID comes from a separate, unrelated events management suite). In the subform, I display the most-commonly-edited fields so that they are editable without navigating to a different record.
However, there will be instances where it becomes necessary to navigate to one of the records listed in the subform. I would like to make this a quick process by just clicking on the primary key in the subform, and have the corresponding record appear in the main form.
In my searches I've found a common suggestion to use a DoCmd.OpenForm method where the form opens to that specific record -- in effect filtering by the primary key number. I don't prefer this method because it disables the ability to navigate to other records using the previous, next, find records, (etc.) buttons without closing and re-opening the form.
Is there a way to make the main form 'jump' to a specific record by clicking on a control in the subform, without limiting the ability to navigate in the main form?
I have an endpoint for students so they can report any faults in the compound.I want to build a form that contains buttons of a certain value so that a student clicks on the button.Is fed directly to the table and pass to the next form to another value table.
I have a report that requires the user's input for a field called UserID.
I also have a form in which I want to have a button that can be used to print off this report (which would involve automatically entering the UserID into it). How do I do this?
Here is the code for the form button that I am using at the moment, but when you click it, Access still needs the UserID (duh!). So, how can I automate the input?
Code:Private Sub Command25_Click()On Error GoTo Err_Command25_Click Dim stDocName As String stDocName = "Menu" DoCmd.OpenReport stDocName, acNormalExit_Command25_Click: Exit SubErr_Command25_Click: MsgBox Err.Description Resume Exit_Command25_Click End Sub
I have this form which have some text fields and CheckBox list or Option list, you fill the text fields then chose from the option list then adding the record by clicking the button.
I want to change this so that by choosing any option fron the option list it will add the record automatically without clicking the button.
I want to force an autonumber field on a parent form to start a new record when clicking on a subform, so that value can be passed to new records in the subform. Is there a simple way to do this?
I'm using Access 2010. I have a parent form based on a query that does not have any fields intended for input but has an autonumber ID field. The subform is based on a query that finds records based on the ID field in the parent. When the parent ID field has a value it works perfectly, including adding new records in the subform. When the parent ID field is blank, though, I can add new records in the subform but the ID field does not populate.
I made a workaround by adding a Yes/No field to the parent and its query that users can click to create a new record, so the ID field has a value to pass to the subform. This works fine, but I feel like there should be a better way to do this without user clicks.
Via VBA, I've tried setting the parent form to dirty, and setting the Yes/No field to Yes, along with a variety of less likely candidates like refreshing and requerying. I've tried the above on various events including the parent LostFocus; the subform Got Focus, On Click, On Mouse Move; and the same events for control on the subform.
At this point I'm not sure whether the problem is my event choice, or the object method I'm using, or just the syntax for my control references. Or maybe this is actually more complicated than I think and sticking with the checkbox option is the best way to go.
I have a form that has several tabs and in one of the tabs, the subform is very long. When I click from tab to tab, the main form scrolls down and the list of tabs disappears. So, when I am done with entering the subform, I have to scroll up the page to see the tabs in order to click on the next tab. I am hoping if someone has an idea how to stop the main form from scroll down each time I click on a tab.
Hello, this is my first post. I am very much a novice and have come across a problem that I'm sure is simple to solve but so far the solution has eluded me. All I want to do is subtract a field in one record from the same field in the next record in a query or report but I have no idea how to do it. Can anyone help please ?Thanks in advance.
I have one main form with 3 tabulated sub forms. My main form consists of two fields. When the user clicks tab 2 (subform 2) or tab 3 (subform 3) the main fields should hide
I tried to achieve this by using the on click event at the tabbed forms. I referenced the two main fields and used the visible property followed by a form requery. It didn't work.
I'm creating a database to track new policies request. I have a form in datasheet view that displays a list for all Initial Review and Draft status. I would like to click (... or maybe double click) on the Policy Name field that will display all fields into single form that is link to PolicyID ... to update any info needed. In other words i want to click on that record to be display in actual form.
Private Sub PolicyName_Click() Dim stDoc As String Dim stWhere As String Dim strsql As String Dim DB As DAO.Database
I am trying to get a form to loop through after a click the next. I have looked around in this site, and ive not found the answers im looking for. What im trying to do is I have navigation records for my form, but when I reach the last record, I would like it to loop.
I have a startup splash screen with a "OK" button, similar to Nortwind database. The OK button works as far as opening my switchboard page. But how do I get the Splash screen to close after I click the OK button? So I can see my switchboard page.
Every Page has its on data source based on query, and they aren't related to Parent form or to each other. I want to set few buttons on every Page which would filter records in predefined way.Ex: one page has calculated field named [Za platiti]. It has numeric values form 0 up. I want to set one button to filter only records where field [Za platiti] is greater then 0, and other butt to filter only records where [Za platiti] is = 0. Other filters based on combo box I use regularly.
I use a Frm1 which updates my Tbl1. By clicking on this Bt1 of the Frm1 the record is duplicated on purpose having enabled and disabled fields. While Frm1 shows the duplicated record (so it is open) I can change it and save it as needed. However the Frm1 loads having an enabled Cbo1 which normally allows the regular user to pick any value A,B,C or D.
What I would like to have is a line code under the Bt1 click event able to set the value "D" on the duplicated record only. I can not write it under the load form event because I need value "D" set on the combo only when I click the Bt1. Regular user still should be able to select between A,B,C or D when he loads the Frm1 to input a new record.
I tried Me.cbo1="D", also tried Me.cbo1.column(1)="D" under the Bt1 click event and both of them failed. What have I done wrong? How can I get it done?
I'm incrementing a counter every time I click on a combobox by using the on click event and this code:
Code: POcount = POcount + 1
I have 5 fields on my form: GWS1, GWS2, GWS3, GWS4 and GWS5.I want to store the value of the combobox when clicked into the correct GWS field. For example: If I click the combobox 3 times it would store the value of the combobox after the 1st click in GWS1, after the 2nd click in GWS2 after the 3rd click in GWS3.I tried
I have a Main Form which is essentially the based on my child table called tblTaskHistory. The Main Form has a subForm which is based on the parent table called tblTasks. I am using SQL queries to feed the combo box recordsource that is located on the Main Form. The After Update for the combo box populates the subForm which allows the users to look at details of a task before he/she "accepts" it. The problem is that when he/she clicks on the subForm to view the details of the task the Main Form locks up. The user, after interacting with the subForm, cannot make an edit on Main Form now. The user has to close the Main Form and then reopen it to perform the "accept" action. The form works absolutely as intended - that is if the user doesn't click on the subForm - however once he/she clicks on the subForm the Main Form locks up.
I have a program that has a "GC" Button that I click on which takes me to a General Contractor Form. It works perfectly unless the Firm has an apostrophe in it's name. For example "D'Agostino". (refer to attached DAgostino1.jpg). When I click on the GC button, I get the attached Syntax error, (Syntax on DAgostiono.jpg).
The third attachment (GC Firm Button Code.jpg) shows the VBC for this button.
I want to only save changes made to the DB row when the user clicks the Save button I created. I have some text boxes which currently are bound to different columns in the given row (ex: name, address).
Right now, changes are updated automatically when the form is closed or when focus moves to a different tab page.
Is there any simple way to do this? Currently all form input objects are bound to their respective columns (ex: name, address). Should they be bound, or should I just perform a query when the form opens to find the specified item then load the different fields into the proper text boxes.
Also, when I TAB through all my input boxes and the TAB focuses on my Tab Conrol Object the text boxes are automatically updated with the next item n the DB (next row). How can I prevent this?
I have a table in my database which I want to update on a daily basis from an Excel workbook. Normally I would just use the TransferSpreadsheet command but in this case the format of the source sheet makes things a bit more complicated (It's not my workbook so I have no control over its layout, unfortunately)
My formatting issues are as follows :
-the header row is not on row 1, but row 3 (the first two rows are free format comments) -there is a gap row between the header and the data region -the source sheet is laid out with dates as the headers (left to right) and my field headers running down (top to bottom) - so would need some form of transposition -Basically, looking for some direction on how I should approach this while maximising efficiency. One approach would be to have my own local Excel sheet with VBA code added, to open the source sheet, copy / edit / transpose as necessary and then import my local version and append to the existing table. But this adds an extra step to the process which I'd like to avoid if at all possible.
I would prefer to 'customise' the import within Access itself, to account for the above obstacles, so that I could just point to the source document directly but import according to my own 'non-standard' rules.
