I have the need to display the return of my "Sum Query" to display in a text box.
I need the attached below value (40500) in the "SumofQuery" attachment, which updates every 5 minutes to display on the "StatusBoard" attachment text box.
I have been searching for a good 10 hours on how to do this and still cannot find it.
Here's the form I'm trying to Create:
VEH POS NAME
A21: TC: CPT Somebody
G: SGT Someoneelse
D: PVT Noone
A22: TC: SFC Smith
G: SGT Jones
D: PVT Doe
and so on and so forth.
The VEH and POS are just going to be Labels in a form....no prob. Each Soldier's Squad and Team (for mounted Vehicle and Position) are stored in the Personnel Table. The below query is for vehicle A7 (ACTUAL would be the same as TC above). The query works. I just need to know how to get the result to display in a text box. What I'm planning on doing is creating text boxes for each posistion with these small select queries, so when I update the SQD and Team in the Personnel Table it updates on this form. Or is there an easier way to do this?
Dim strSQL as string
strSQL="SELECT [tblPERSONNEL]![RANK] & " " & [tblPERSONNEL]![LAST_NAME] AS NAME
FROM tblPERSONNEL
WHERE (((tblPERSONNEL.SQD)="A7") AND ((tblPERSONNEL.TEAM)="ACTUAL"))"
I am making a database for my work place where there is telephone counsellors and they need to complete a certain number of supervision hours and a few other categories of hours required for training and several other things. The manager wants to be able to see the total supervision hours and the other categories for a worker when the worker is selected and the date range for the queried time entered.
I have a form that has quite a few items on it. I have two text boxes that allow me to enter a start date and an end date, I have a combo box that allows me to select a worker and I have 3 text boxes that I want to populate with the sum of 3 separate columns in another table when the date is entered and the worker selected so the manager can see, at a glance, how many hours each worker has done on the separate items. Maybe I would need an update button at the bottom that, when clicked, would perform the required calculations.
I have 3 queries that return the required information but I need to get one of the columns from the query results put into each of the 3 text boxes. Basically, when I click on the buttons the right query appears, I just want column 3 (which is a sum column) to get put in the corresponding text box and I want all the boxes to display the sum of their corresponding queries when a date and person is selected.The form is called frmSearch, the 3 queries are called qry_sumisshours, qry_sumisshours and qry_sumtcshours. The 3 text boxes I need to get populated from the queries are called txt_ results_ sv_ hours, txt_results_TCS_hours and txt_results_iss_hours.
How do I get a certain column of a query result pasted to a text box when I open the form?
View 2 Replies View RelatedWhen we are managing incidents, users have decided on their own method of recording the incident... here are some examples
INC002546
INCIDENT002546
2546
INC# 2546
Inc# 2546
inc# 2546
Inc # 2546
The correct way is the following:
Inc# 2546
^ capital I, no space between "c" and "#" but a space AFTER the "#"
Then the 4 digit long number.I was thinking along the lines of trying to identify the number, removing everything else and then placing "Inc# " before it...
currently we allow notes, which should be made like such: Inc# 2546 - Notes.however, people have their own method for this too (however most of them are at least after then incident number so that makes things much easier)another issue is on the same database, some manual requests also appear which have different entry format: RQ# GK034LW2052 but that contains a mixture of letters and numbers... so when identifying the request number... as long as I make sure that it is a number and not a string of numbers and letters, I should be ok..
I would like to allow users create a query and then display the result in a new table. Just like the regular way in Access.
I know how to do it using DAO. However, I am working on a ADP, and want to use ADO for this. I cannot find a solution in ADO. So frustrated!
Any help is appreciated!
I have built a few Access DBs and am looking to improve my development skills and attemt to migrate my Access DB to SQL Azure. I find access to be a very powerful development environment to build rapid applications . How to use multiple monitors so that I can display different forms on each monitor from a single Access DB.
View 1 Replies View RelatedIs there an easy way of entering a value in a text box, passing to a query to do a count function and then return the value of count function in to anther text box?
View 5 Replies View RelatedHi All, I hope someone can help with this, I have 2 tables, 1 main table that holds all my part data ( ie part num, description, etc) and a second table with vendor info. On my Form I have all my fields that display the record. I placed a combo box on my form that I need the user to be able to select a vendor, which is working but I need the form to show the vendors part number in a field. The main table has a manufactures part number, and I have 3 fields that have my 3 vendors part numbers for that part in it. I have the combo box so that it shows the vendor name but how do I get it to look at a certain field for the vendor part number. Im still really new to Access and am clueless any help would be greatly appreciated. I know I have not explained this every well so I am attaching a sample of the DB so you can see that I have Thanks again
Thanks everyone..
First, I am a beginner with Access. I am a graphics designer that has been assigned to cover for a db programmer that quit!
Here is my problem:
I have a database that we use to hold customer information. There are 22 fields in each record, and we are now well over 3000 records.
Once upon a time, to find a specific customer, we would just go to the bottom of the page, and use the arrow buttons to scroll through them all. This is no longer possible as the size is too big to manually search.
What I would like to do:
Upon Access startup, display a form that has a single input field and a button titled "Search". The input field is titled [UserName], as this field is the unique key identifier for the record. When the user types in the UserName and clicks the SEARCH command button, another form appears to display JUST THAT RECORD in the easy to read form!
If this is really basic, I appologize. I have 20 years experience with commercial illustration and only 7 days experience with Access. I have purchased books, and hit the forums, but I am not a VB programmer, and my skills this area are REAL weak!
My resourse books include the following:
Wiley - Access 2003 Bible [Prague, Irwin & Reardon]
Osbourne - How to do Everything with Access 2002 [Anderson]
O'Reilly - Access Cookbook [Getz, Litwin & Baron]
Thanks in advance for any assistance.
Hi
I am new to VBA with access. Im wanting to get the result of a query called "qLastRotaDate" into a variable called "datLastRota". The query returns a single date, it is not possible to have more than one result for this query. I have tried different variations of : datLastRota = qLastRotaDate but cannot get any to work. I'm assuming this is very simple yet I cannot figure it out as am very new to VBA.
Any help would be greatly appreciated. Sorry if this has been dealt with in previous posts but I could not find any info by searching the post.
Thanks
Mikee
My database has Main form and a Sub form. On main form i place one unbound text box named investigations. In subform of which datasheet there is a column named TestCode. I want unbound text box (Investigations) to display row values which selected in a column (TestCode) of subform.for example:Investigation field should display "CBC,HB,ALP".
View 5 Replies View RelatedHow can I make certain my user enters records on a subform before attempting to save the main form? Right now they can completely ignore the subform before saving the record.The Main form has business address, etc. on it. the subform is bound to a join table that lists the multiple categories, subcategories and sector the business is listed in for a directory.
I already have my fields set to required at the table level in the join table, and have some existing VBA in both my subform (to update edited date) and my form (to validate empty records where a certain condition is met) but that's not the issue...
How do I focus the user to enter a record on the subform to the point where they are forced to enter something and complete the subform before the record is updated.
I have included the form control [Forms]![AddMatterFrm]![MatterIdFld] in the criteria of the first of three queries.
1st Query - with the form control isolates transactions relative to the contents of the form variable (coming from an open Form)
The second query is a XTAB query further processing and summarising the transaction.
The 3rd one adds another expression field.
I execute the 3rd Query using the command below
Set rstDebtTrans3Qry = db.OpenRecordset("DebtTrans3Qry")
I then get the ....Database Engine does not recognise [Forms]![AddMatterFrm]![MatterIdFld] as a valid field name or expression.
If I take the control reference out and hard wire the value I want - there is no problem.
I'm sure it has something to do with the XTAB query but I need a solution.
the [EFS] and [CB] is one of the team for handling the project but after I execute the query as below , it just show -1, 0 as the picture but they are orginally Yes/No box from the table, how can I display the result as a Yes/No box instead of -1 ,0
--------------------------------------------------------------
SELECT Projects.[Project Name], Projects.[EFS],Projects.[CB]
FROM Projects
WHERE (((Projects.[EFS])=Yes) AND (([Forms]![A]![EFS])=Yes));
UNION SELECT Projects.[Project Name],Projects.[EFS], Projects.[CB]
FROM Projects
WHERE (((Projects.[CB])=Yes) AND (([Forms]![A]![CB])=Yes));
Say I have a form and the user inputs a date, say "21/02/2014" into a text box, how can I get another text box on the form to display the day afters date ("22/02/2014").
I'm sure its really easy but I cant seem to get it to work.
Hi,
I'm trying to work out a formula in a query.
At the moment it looks like this:
Days on Hold: calcworkdays([on hold date],[off hold date])-1
Now i have a module thingy set up (calcworkdays) which works out working days. What this expression does, when theres an on hold date and an off hold date is work out how many working days something is on hold.
Now, problem is, not always is something on hold, therefore fields are often blank and then i get a result in query that says "#Error", but i want to use the answer to this expression in another formula, but when error is displayed it makes the other query show error too.
What I want is some sort of If statement or similar so that if no results exist to display "0". Can anyone tell me how to add this in?
I'm a total Access Noob, it took me forever to work out this working days thing (damn access for not being as simple as excel!)
I think my problem might lie in the way the function has been written. I think i might have to modify this to show "0", rather than "error"
This is what ive got in the function.
Public Function calcWorkDays(dteStart As Date, dteEnd As Date) As Long
Dim i As Long 'day counter
Dim dteCurDay As Date
'set i = 1 if you want the first date to count as a full day
'or i = 0 if you do not want the first day to count as a full day
i = 0
dteCurDay = dteStart
Do Until dteCurDay >= dteEnd
'check date against holiday table
If 0 = DCount("[HolidayDate]", "tblHolidays", "[HolidayDate] = #" & dteCurDay & "#") Then
'continue checking for weekdays
If Weekday(dteCurDay, vbSunday) <> vbSunday And _
Weekday(dteCurDay, vbSunday) <> vbSaturday Then
i = i + 1
End If
End If
dteCurDay = DateAdd("d", 1, dteCurDay)
Loop
calcWorkDays = i
End Function
Any help would be much appreciated!
Thanks
I wish to print the result from query in a subform. In my main form, I had a textbox call 'year' which asking user to input a valid year. The query will have to find out all the records that are in that particular year, one year before and one year after. After that, it should display the result in datasheet form. Can anyone out there help me in this matter?
My second question is Can we use crosstab query in the subform?
Thank you.
Is there a way to make a form that will display all records based on a single date, at the same time, in the same format each and every time?I have a table which has the following fields:
ID (Autonumber, PK)
ServiceDate
RunningNumber
BonnetNumber
Deallocate (yes/no)
Now, I would quite like to keep the form in a style similar to all the others I have, not least as I have to cater for users of all age and abilities, so keeping things as simple. I have attached an image - each row to represent a record basically, I would like the form to open and show the same layout on each day (I would place the textboxes etc in route groups); a null value would not be allowed for at least one field in each record, I could force the records to populate the form in the same way each day?
It's written a Function which takes an Integer as Arg, runs a Select Statement and returns a String.
Such that the Control Source of the Forms reads....
=ConvertCompanyNumbers([12]) = where [12] is the Name of the field. Not My choice to have numbers as Fields.. but there it is.
Anyway.. I'm getting an #Name? error... also tried [Ctl12] but again same error.
I know the function works, as I can use something like =ConvertCompanyNumbers(12) and it displays the appropriate result.
What is up with this?
I'm trying to use the job number field, which is my primary key in my table, to auto assign the new job number on my Forms. Currently, I have to enter a new job number manually, and it has to be unique because that is the way I have it set. I can't use autonumber because Access does not allow you to select what number you would like to start from, which would not play well with my current job numbers.
Basically I need Access to get the job number from the last record and add 1 to it, or just find the last / highest current job number and add 1 to it.
I created a query (qryFindJob#s) that list all of the Job Numbers, but I'm not sure how to add the query results to my Form to display the Job number + 1. I created a text box, typed a simple expression in the control box to see if I was on the right path (=[qryFindJob#s]) but I keep getting a #Name? error in the txt field.
I have main form call frmemployee and subform call frmlcourse subform the main form hold's employee information e.g. first name addresss the sub form hold's all the training courses that the employee has been on
I have a text box called txtnextcourse due to display when the next course due date is
Code:
=DMin("Expirydate","tblcourses","[ID]=" & [empID])
this works perfect. I have check box on my subform called ex course if this is true. I don't want the dmin to count that record I have tried
Code:
=DMin("Expirydate","tblcourses","[ID]=" & [empID]) [forms]![frmlcourse subform]![ex course]=false
I have a form with a subform in it. The Subform relates to a junction table.
For each record on the main form, there may be more than one record on the subform. The Subform only has one field on it (a combobox).
What I want to be able to do is have a text box on the main form that shows a concatenated list of all of the records on the subform.
For example, if I have 2 subform records, 'Yellow' and 'Blue', I want a textbox on the main form record to show 'Yellow, Blue'.
I have tried so many things I have found online (over about 5 hours, including a module called ConcatRelated) and absolutely nothing works!
Hi,
I have created a form (Form1) based on a table (Table1) and also a Query based on this table (Query1). I calculate a field in the query (Expr1: [column1] + [column2])
Now i have created a text box on Form1 that should display Expr1.
I know I could also calculate the value directly via the expression builder, but I would prefer to simply display Expr1 from my query. Which is the syntax I have to use in the Expression Builder?
I tried "= [Query1]![Expr1]" but it does not work.
Thanks for your help
Tigrou
What is the best way to impliment a query in a form so that the user can view the query records, and have the option to print or save the selected record using command buttons?
I tried subforms but I could not get the command buttons to work in the subform after it went into the form, it wanted to print the entire form instead of the selected record from the subform.
So in a nutshell I have 3-4 queries that are built, and I want to have them show up on my form in a format that the user can scroll through the results and select a single record of the results and then print or save that individual record from the form, if such a thing is possible.
Thanks in advance
Todd
I have a result for a query made from four different tables for which I would like to refine the result of this query grouping multiple rows into columns.
Attached is a pdf file showing the results being obtained by my query and underneath is how the result would like it be after running the query.
I am currently using Access 2010.