=Avg(IIf([Final]="TST-TST OK RTN" Or [Final]="NFF-TST & NFF" Or [Final]="RTN-RETURN" Or [Final]="SCL-SCR LOCALLY" Or [Final]="SCR-SCR RETURN" Or [Final]="BER-BER RTN CST",Nz([Cost Of New],0),0))
I have a subform with a total of 18 records. 2 records meet the criteria above. This function is dividing by 18 (total number of records) instead of 2 to get the average. How can I get it to divide by the right number of records?
I am trying to get the average of a select group of records within a query. It appears the davg function should give me what I need, however my query returns no results. Here is a sample of my data.
I am currently working on a small database to track my own investment records.
I would like to create the function which enable to count the number of records that has exceeds the average value during that period.
Following is the SQL that I have managed to produce:
SELECT [ED 2013].Code, Count([ED 2013].Start) AS CountOfOpen1 FROM [ED 2013] WHERE [ED 2013]![Date] Between #1/1/2013# And #2/1/2013# AND [ED 2013]![Start]>[ED 2013]![End] GROUP BY [ED 2013].Symbol;
This SQL does work. However, when I try to add the Avg function. The Query stop working.
Meanwhile, I am wondering if there is any existing Ms Access template (free or commercial - but must be customisable ) available?
I have a field in an MS Acess query that has records like - 1,000; 534; 769.13; 0; 654; 0, etc. It can also have few null records.I want to calculate the average of all records which are greater than zero. Ignore zero values or null values.
I am trying to display on a form the average number of lines/records per hour that a person is adding to the database.
Trying to work with Dfirst and DLast I'd subtract the time of the most recent record from the time of the first record entered and then divide the number of records to display the average per hour in a text box.
I am creating a database for work. I have a form that has a record of information for a single contact. On that form I have a sub form that will have a series of notes that should be attached to the record that loads.
At the bottom of that form are three buttons. They move from one record to another. I want the notes subform to change when I move to another record.
How do I link the subform to the record loaded on the form.
I can't get this to work! I have a module for it and I think (?) the correct code.
'Limit Records On Subform. OnCurrentEvent of Main Form ' Main form is frmTimeCards LimitRecords Me.frmPayrollEntry.Form, 7 ' Allow at most 7 records Scenario: Main Form/Subform Subform is a Continuous form. Enter Payroll via Subform Via Combo, select a Employee on Subform Enter Hours Finish,Select a New Employee Using CarryOver for Employee
Problem: Can't add new Record for a new Employee.Because of the Limit Records Code.?
I have a form that shows data from tables tbl_AgencyInfo, and a subform showing data from tables tbl_CourseInfo & tbl_StudentInfo. Each agency can have mutliple students and multiple courses, so that is why it is set up this way.
My subform will only display one record at a time, however, even though there are multiple students/coursess that relate to the agency. I am thinking something is off with my relationships but I'm not totally sure. In previous databases I have linked my tables together in a central table, but that table in this case does not seem to be populating.
Form invoice has a subform that can show max 6 records. Once more records are involved I want to show the last 6 including the new empty record. How to do that?
I have one table containing all neccessary detail of members of varius soceity
I create a query to find name of all society(ies) for one person
When i create a form to the that query it show all record in form view,datasheet view but when i insert this form as sub form in other form it shows only first record.
main form and subform not connected each other as main form linked with table and subform with query
How to duplicate records in SubForm, i have created a form (transmittal) with a subform that contains all items listed:
Master Field : Transmittal No Child Fields: IDTransmittalNumber
There is a button that allows me to duplicate form , however when i change the Transmittal no in the main form it automatically deletes all data in subform since they are both linked by that field..
I have a subform that displays records from a query. Usually, there is no issue. Sometimes, though, the subform stays blank for no apparent reason.
Observations:
-Open form and select relevant information (subform stays blank)
-Open query and 1 record is present
-Go form layout view and turn "Data Entry" on, then back off
(The form appears to refresh when this setting is changed and the subform is displaying the 1 record properly now)
-Close form, re-open, and select the same information as before (subform, again, stays blank)
Again, the subform usually displays the records just fine. It's only sometimes that it has this blank issue even though records are present in its source query. I've tried refresh and requery macros on the form and subform, but that doesn't get the information to show up (though, switching "Data Entry" on and off does).
I've got a master form, which is used to search for records, and display links to them in a list box. When the user selects a record, they get the full details of the record on a subform. At the top of the subform, I have two buttons, an edit button, which allows them to make changes to the record, and a "new" button, which allows them to create a new record.
My problem is, after a new record is created, the subform adds a new page. So instead of having record one of 1, it shows record 2 of 2. So if a new record is saved, and the user tries to access another record, nothing appears because the subform stays on record 2 of 2(which is a blank undirtied record). If you press navigation button back it will show the record they selected.
Maybe I could make the new form a pop up form, and pass it parameters rather than making a new form within the subform.
I've tried putting the command DoCmd.GoToRecord , , acPrevious in the subforms Current() method, but I get an error saying I cannot go to the previous record.
target low eg 4 target high eg 8 target (to have the avg) result 6
I have been doing the following but dont work ..
=Avg([Target Low].[Target High]) result #error =Avg([Target Low]+[Target High]) result 12 =Avg([Target Low]&[Target High]) result 48 =Avg([Target Low]:[Target High]) will not work
How to sort entered records in a subform by combo box. Notice combo box has integer value not text. I want to bo sroted by text visibled ASC. The code must be in Command control SORT (See pict enclosed)
I have a subform that has 3 check boxes. If the record was an existing record in the SQL table and I want to change the value I can change it no problem. If I try to check the box for a new record added to the database then it doesn't allow me to save the change. I know that this is a problem with bit values in SQL when deleting so I made sure all 3 fields have a default value, but it still doesn't let me make changes to new records.
I have a main form [frmZone] and a sub form (single form) [fromZoneSub] linked master/child by [ZoneID]
If there are, say, 5 related sub form records I'm trying to get a label [LabelCount] on the sub form to say "1 of 5" and as you click through the sub form for the label to change "2 of 5", then "3 of 5" etc....basically letting the user know how many records there are and as they click to the next record know which record they're on.
I have a Sales Order form that is used to input sales orders. the main form is comprised of customer and shipping information that is created from a query based on a customerOrder table while the subform is comprised of product information that is created from a query based mainly on the CustomerOrderDetail table.
I need to be able to put multiple products in the subform as a customer can order many items, when I save and close the form I look in the customer order table and see only one record for that sales order while seeing all the records in the detail table for all the products ordered for that sales order as I should but the problem I run into is the query that I have for the sales order shows multiple records for every product that was ordered on that sales order and shows up multiple times in my sales order maintenance form when I only want to see the one. if I change the query to a total query that fixes that problem and only see one copy of the sales order but makes the forms un updateable which is no good.
I cant figure out what I did to make this happen as I have a purchase order form that is setup the same but doesn't have this problem and works great, no matter how many items I have in the subform I only see one purchase order in the query and in the maintenance form.
I have a form that uses Table A as a record source and has a subform that uses Table B as a record source. There is a one to many relationship between Table A (one) and Table B (many).The user opens the form to a set record, then uses the subform to create a new record in Table B.
This works perfectly and I can do everything I want. But sometimes the subform creates a blank entry in Table B before I enter any data. Then, once I start entering data, it creates another record in which it stores the data that I am entering.The result is two records: One that only has the date of the record's creation (I set that to be automatic upon creating a new record) and the primary key that links Table B to Table A. A second one is the "true" record, the one which stores all of the data that I am entering.
It won't happen for 10 records or something and there is no apparent pattern. In case it makes a difference, the form is set to open as the subform as the focus.
By using a query I have been able to sort the data entered so that all I have left is a list of products that are below their reorder level and the number that needs to be ordered, great so far, this is what I want, but when I try to create a purchase order form as a form/sub form and put in the query I created, there are no products listed, it seems as if I cannot associate the two together, as soon as I link the query for the sub form with the purchase order form.
What I would like to happen is that when I open the purchase order form I can enter the purchase forms details and have all the products that need to be ordered visible in the sub form, the only way that I can get this to half work is to delete the link master and link child fields. If this is the way to go how do I link these products to the purchase order?
Off of the same dB I would like to create a subform which will allow me to enter multiple records to the main table, the one attached to the main form. How to go about creating one?
I have a database consisting of two tables. One table is meant to be a running log of entries (Table A) and the other is simply used to house specific information relating to certain records (Table B). There is a form within the database that is used for data entry. Within that form there is a subform that has a button that will automatically insert a new record into the running log (Table A). This button currently carries over one value (a Doctor's ID) but I also need this button to begin carrying over my employee's name as well. I have tried numerous times and I can not get this second value to carry over.
Is there a way to add a field to a subform that preforms a net value calculation on all the records in that subform?
Fields: Record ID ItemAmt PaidAmt Need a Net field here? (not part of form; description only) 1 500.00 100.00 400.00 500.00-100.00 2 500.00 50.00 350.00 400.00-50.00
The Item Amt is referring to the main form and should be the same amt.I need the Net field to act as a running balance.
