I am developing a form where students have to enter their ID number but I want my form to check through a table of students and their IDs and flag up if the ID number does not exist in the table.
View RepliesI want to check if data entered in a form field is existed
The form is bounded to a table
I used this code
If DLookup("Telegram_Number", "tbl_Violation_Of_Building", "Telegram_Number Like " & Forms!frm_Add_Violation_Building!Telegram_Number) Then
MsgBox ("number existed")
Me.Telegram_Number = ""
Else
End If
everything is ok but if the data is existed the database show the message and clear the field but i'm getting a Run-time error
'-2147352567(80020009)': the macro or function set to the beforeupdate or validationRule property for this field is preventing [ISF] from saving the data in the field
I guess the problem because the form is bounded to a table so he will save automatically
My solution is to unbound the fields and save the data via vba but is there any solution with a bounded form???
I have a form with a number of entry fields and after a button is clicked I write to an MS Sql datatable. Everything works fine as long as I put a value in each field. If I do not put a value in one of the fields the sql does not run and the record is not added / updated in the database. I have tried checking the length of the data in the field using
Ent_Length = Len(tb_TagDesc)
or
Ent_Length = Len(tb_TagDesc.Text)
or
Ent_Length = Len(tb_TagDesc.value) but nothing shows.
I am using Access 2007, 32 bit Windows 7
I have a form with several tabs on it, where the user enters various info.. I want to have the user hit the save button and have all info saved to a single table. Is there an easy way to do this. Please excuse my ignorance but I am fairly new to Access. Thanks in advance!
View 9 Replies View RelatedHow I would go about appending data to a table that has been entered by a user on a form.
My initial idea to tackle this was to create a number of text boxes as a method of user input which would all then transfer to a table but this doesn't have much longevity to it(if the database requires additional columns to be added, etc.)
The setup at the moment is two tables, a main table, and a temporary table(which is where I intend to first store the user input, this is so that the user can view what they have entered and make any necessary changes(undo))
I'm wondering if there are any easier ways to go about this such as, a msgbox appears and asks the user to enter each individual column data for a row. This doesn't sound like the most efficient way but efficiency isn't a priority right now and is something I'll look at later.
I'd like it so that a user can input data into a number of text boxes, a button has an onclick event that will append all entered values to the temporary table, this is then relayed(I'm assuming through requery?) back to the user as a way of checking before really adding it to the main database, and then if they're happy there is another button which is then enabled so they can add it to the main database.
I am not sure where this thread should be in forms or queries. I have database which has 3 linked tables by ID in each table. I have built a query on the 3 tables, then created the form.
Now when I enter data on the form and save it, when I open up the said form again , the data is not there. Yet the data is in both the table and query
If I only use 1 table, then there is no problem. The record source for the form is the query, and the query uses the 3 tables.
I have a form that the user enters employees daily duties. I have code to run sql after the BoxNum field has data in it. I want it to look at the BoxNum field and the dropdown box for the task to see if the entered box number has already been completed for the task selected on the form. Here is what my code looks like now. The code runs but gives me the msgbox no matter if it is a made up box number and I also get a syntax error 3075.
Code:
Private Sub Text13_BeforeUpdate(Cancel As Integer)
Dim rs As DAO.Recordset
Dim strSQL As String
[code]....
I am having an issue in access form that when I enter new values in a form it does not appear on the table. Normally, as I understand, value entered in form should appear on table automatically. This is not happening to me.
I checked the design view of the form and find that the data is linked to table, but in reality it is not the case.
I have a main form titled "projects" with a subform titled "inventory". They are linked by two fields "project" and "fiscal year" with a one to many relationship. These fields are also the primary keys in the main form. I also have the referential integrity option activated.
Whenever data is entered in the subform inventory, it duplicates the main form and all the other subforms linked to the main form. (I have about 11 other subforms linked to the main form). So if I enter 2 records in the inventory tab, there will be 2 records for the same project and fiscal year in the subform and all the other linked subforms with the same data, so it is almost like it is seeing the inventory subform as the main form. I have tried deleting the duplicate record from the main form, then it deletes the 2nd entry of the subform. I have attached a pdf with a print screen of the 2 duplicate records with the same fiscal year and project name.
I have another form called Notes that has a similar relationship, but doesn't have this problem. I think it might have something to do with the conversion. I originally created the database with Access 97 and we are now using Access 2007. Am I missing something that needs to be done in Access 2007 to link the 2 forms, so I can enter records in the subform without duplications?
Also, the database is split so there is a back end and front end. I have all the tables and relationships set in the back end.
I have a database (split into front and backend). Users populate the table using a form on the front end. Recently, it has been pointed out that some of the data entered into one specific textbox is being changed on the table. The data entered is always has a minimum of a letter and number value i.e. "A1", "A2" etc. Upon examining the table, this has changed into numeric values i.e. "1291", "1061", "852"... etc. Looks like it is translating them into both 3 and 4 digit numerical values by the looks of things. Where more complex data is entered such as "2(A1, A2)" these seem unaffected.
The field is set to text, I have set no validation rule, format or input mask. Just can't see why access is changing these values. It seems to be translating them, but I can't see a pattern.
I have a form that request the User to enter a Parcel ID number (99-9a-99-99aaa-aaa-aaaa). The sub form asks for the subdivision number, block number, and lot number. The subdivision number, block number and lot number are normally part of the Parcel ID number but sometimes they can be different. I want the sub form to fill in the Subdivision number, block number, and lot number as a default but allow the user to change the value if needed. currently the sub form will only show what is entered into the table itself if a change is made on the main form the sub form does not reflect the change.
View 3 Replies View RelatedI currently have two froms, "add record" and "add record cont." The reason I have two seperate forms is because when clients create a new record information needs to be saved to two different tables and when creating one from with fields from both tables I ran into many problems. The two tables are named : tblMain, tblFileLoc Currently there is a textbox on both forms named "fileID" the FileID in the first form is from tblMain and is the primary key for that table, the FileID on the second form "Add Record Cont." is just a normal field. When clients enter in the new FileID in the first form "Add Record" and then move onto the next form "Add Record Cont." i need access to bring the entered FileID from the first form and Fill it in the FileID field in the second form. Currently I have tried making the control source for the textbox on the second form = the textbox on the first form but it brought up an error.
View 1 Replies View RelatedI am fairly new to access but so far I have been able to get what i need from it, until now. I am trying to find a way of comparing two sets of data to find out an employee's average productivty.
Table 1 -Hours Worked (by day)
- contains 'name' 'date' and '# of hours' worked
- an employee would enter the hours here on a daily basis
Table 2 - Contracts Keyed (by month)
- contains the number of contracts worked that is derived from seperate system
- this is entered on a monthly basis (so for example: John keyed 30 contracts for the month of January)
- the system i am pulling this info from does not have the ability to pull a daily count of contract per employee, only a range of dates and it then provides the sum for that range (unless I ran a query for each day, for each employee which would take me hours)
- employees dont have access to this system to enter their own # of contracts keyed on a daily basis.
- for entry, so far i have just been putting the first of the month and then the # of contracts.
In a nutshell, this is the calculation I am trying to create:
(Sum of "# of hours" for the month) / (total "# of contracts keyed" for the month) = employees average hourly productivity.
I have tried to do this with various types of queries and reports but with no luck, I get a prompt saying that access can't compare the 2 fields.
Is there a way to compare the data that is entered daily with the data i would enter monthly?
I work for a voluntary organisation in a hospital environment. Older patients coming into A&E will get sent a letter from us offering help.
We send out about 3,000 letters a year and have just over this number of records on our simple Access 97 database.
The problem I have is when we enter data using a Form in the field Address Line 1 if we have sent a letter to this address before I want somehow for the program to inform me of this. However, I do not want it to stop me from entering the same address again so I can't use the No Duplicates option. The reason being, we may have sent the patient a letter six months ago in which case we would want him to receive another but if we only sent him a letter say 3 weeks ago then we wouldn't send him another. Alternatively, his wife may now be a patient and will get sent a letter.
At present we look at the admissions list, sort our table into Surname order and check if they have been sent one previously, however this is very time consuming and would value anyone's thoughts.
Unfortuantely, I can't program so tend to use the design features and wizards of Access 97
Does this makes sense?
I appreciate the time any of you may take in answering this Thread. As you can see I am a newbie to this. Thank you in advance.
Robin
I have two table
1 is name master containing EMPID(Primary Key)
2 is Saving which also contain EMPID
i want to entered data in Saving with each and every EMPID with Master
I've got an attendance form set up with check boxes for each day I want to check attendance. I have two problems with this form.
1) All the boxes start out with little squares (I want them to be blank)
2) If I try checking a box for one person, it checks all the boxes in the column (same with unchecking).
I have a Listbox on a fprm which has a button attached to it, the button allows you select one of the items in the listbox and append it to a table. the problem is that it currently allows you to add the item as many times as you like. How can I check for duplicates?
Code:
Private Sub CmdAdd_Click()
'Add new record to tblShootingTasks
strSQL = "INSERT INTO tblShootingTasks ( ShootID, ContactName, Task ) " _
& "SELECT [Forms]![frmTasks]![ShootDateiD] AS ShootID, [Forms]![frmTasks]![Combo15] AS ContactName, [Forms]![frmTasks]![Frame17] AS Task;"
DoCmd.SetWarnings False
DoCmd.RunSQL strSQL
End Sub
In my office we have used Access 2002 for many years. We enter data directly into a table. Many values are repeated row after row, with only slight changes in a few fields. I am looking for a way to automatically have the previous value in a field entered into the current row, and allow this value to be modified if it has changed, but then become the new "default" value for following rows. I have searched the web and found solutions when using forms, but nothing for entering data directly into a table. I have also seen the suggestion for Ctrl + ', this works but I would rather it be done automatically.
View 3 Replies View RelatedI am making a simple database for the computer laboratory in school (my place of work). Actually it is a Automated Logbook System. Here's the Problem. I want to make a form that will prompt me whenever I enter the data(ID number) of the user(student) 3 times already for the current week.
The message box will more likely prompt.
The Data already entered 3 times this week!!!
On that form we have 4 tabbed pages, 3 of which get used regularly. Unfortunately though, the Notes page does not get used very often. The reason is because people say that they don't want to click on the page if there is not going to be any information there to read, and they don't want to enter information if no one is going to read it.
Therefore, I was wondering if there was a way to have the page name, "Notes", change color if notes have been typed? Or, maybe an asterisk (*) shows up next to the page name if notes have been typed.
I have a form with some vertical unbound text boxes, they are table headings for my data, but they need to be editable. I can enter data in them perfectly but once you close the form the data is lost. I would like the data to be saved on the form. I have tried turning them to labels but then they are not editable. What should I try next?
View 5 Replies View RelatedBelow is some code that I'm struggling with and I get an error message "Type Mismatch".
Description: The database contains multiple projects and the subset of each project is a release. The "PublishedNumber" can't be a duplicate within a release, but it can be a duplicate within the table where the data is stored. There can however be multiple occurrences of 0.
Here's my code:
Dim stLinkCriteriaRelease As String
Dim stLinkPublishedNumber As String
Dim DuplicateNumber As Variant
stLinkCriteriaRelease = "[AssociatedRelease]=" & [AssociatedRelease]
stLinkPublishedNumber = "[PublishedNumber]=" & [PublishedNumber]
[Code] ....
Hi all..
This is my first question posted on this site. I have created a survey with questions to be answered. The database is already populated with records of the people's names who were getting the survey. What I need is when the data entry clerk brings up the customer's name on the form, is that they are forced to enter the surveys answers for certain questions before they click the "Save" button. The answers are set up as radio buttons on the form (ie Less than 6 Months, 6 Months, 8 months and 1 Year).
Not sure if a Before or AfterUpdate macro is needed?
Any suggestions would be appreciated. Please email me directly if you have code.
Thank you
We are creating a database to log data on a project. There will be thousands of files. Can we input data, using the same table, at separate locations and then merge the data into a master table? We will need to do that many times.
View 1 Replies View RelatedI created a Form to enter data into a table. Two fields are numeric and typed into, a third field calculates the ratio instantly. I did that by entering "=field1/field2" into the control box in the properties panel for that form element.
However, when I look at the table, all the data goes in except this calculated ratio. Is there a way to get the form to "write" it to the table?
Alternatively, how to get the table to act like a spreadsheet and automagically calculate that third column, then it actually doesn't even need to appear on the form.
I have a form where users enter data in various ways - combo boxes with drop down selections and text boxes where users manually enter some data. I also have several text boxes that return "answers" based on calculations from user entries mentioned above. The form is bound to a table where all the entered data is stored. I'm having trouble saving the calculated information to the bound table. It's easy in all the non-calced boxes, I just put the column name of the bound table in the control source, but in the calculated fields, I already have the formula in the control source. How can I identify the proper column to save the data in this case.
Thanks!