Forms :: Data Not Saved After Entered In Form

Feb 5, 2015

I am not sure where this thread should be in forms or queries. I have database which has 3 linked tables by ID in each table. I have built a query on the 3 tables, then created the form.

Now when I enter data on the form and save it, when I open up the said form again , the data is not there. Yet the data is in both the table and query

If I only use 1 table, then there is no problem. The record source for the form is the query, and the query uses the 3 tables.

View Replies


ADVERTISEMENT

How To Insert The Same Row That Was Entered And Saved

Oct 21, 2005

Gurus,

I seriously need some help with the following.

What I need to do is when I enter the data in the form and before I go to the next record I want to save this row in the table and then insert two more rows with the same values (that I just entered and saved in the table) while incrementing the index field. I also want to programatically manipulate a field value in the second and third rows that I will insert before commiting.

For Example:

Tbl-A
Reg_Num Number (Index)
Name Text (30)
Reg_Type Text (1)
Category Text (10)
Sub_Category Text (10)
Short_Desc Text (10)
Long_Desc Text (50)

1st row:
10001, "PSUS", "A","CREDIT CARD", "FEE", "CCF", "CREDIT CARD FEE"

After I enter these values I click on "SAVE" button. When I click on save, I want to insert the same row twice (notice Reg_Num and Reg_Type values) in the table and increment Reg_Num and change the value of Reg_Type.

2nd row:
40001, "PSUS", "W","CREDIT CARD", "FEE", "CCF", "CREDIT CARD FEE"

3rd row:
60001, "PSUS", "X","CREDIT CARD", "FEE", "CCF", "CREDIT CARD FEE"

As you see, I am incrementing the index field value by 30,000 if Reg_Type is "W" and by 50,000 if the Reg_Type is "X". What it means is copy the row that I just entered, insert it in the table, change the Reg_Type value and increment Reg_Num based on the business rule. COMMIT. Do the same for the next row.

I have about 20 Fields in the table. I do not want the user to type 10 times the same values and make mistakes. This is just an example. I have about 8 different Reg_Types that needs to be stored in the table everytime a new Reg_Num is entered with Type "A". User can enter any Reg_Type but to make my life easier I'm restricting to start from Reg_Type "A". For each Reg_Type the Reg_Num needs to be computed because it is extreamly important in our application.

Hope I explained it right.

Thanks a million in advance.

PS

View 3 Replies View Related

Forms :: SQL To Run After Data Is Entered Into Form Control

Aug 3, 2015

I have a form that the user enters employees daily duties. I have code to run sql after the BoxNum field has data in it. I want it to look at the BoxNum field and the dropdown box for the task to see if the entered box number has already been completed for the task selected on the form. Here is what my code looks like now. The code runs but gives me the msgbox no matter if it is a made up box number and I also get a syntax error 3075.

Code:

Private Sub Text13_BeforeUpdate(Cancel As Integer)
Dim rs As DAO.Recordset
Dim strSQL As String

[code]....

View 6 Replies View Related

Forms :: Checking For Data Entered On A Form In A Table

Jan 7, 2015

I am developing a form where students have to enter their ID number but I want my form to check through a table of students and their IDs and flag up if the ID number does not exist in the table.

View 10 Replies View Related

Forms :: Main Form Duplicated When Data Entered In Subform?

Aug 6, 2014

I have a main form titled "projects" with a subform titled "inventory". They are linked by two fields "project" and "fiscal year" with a one to many relationship. These fields are also the primary keys in the main form. I also have the referential integrity option activated.

Whenever data is entered in the subform inventory, it duplicates the main form and all the other subforms linked to the main form. (I have about 11 other subforms linked to the main form). So if I enter 2 records in the inventory tab, there will be 2 records for the same project and fiscal year in the subform and all the other linked subforms with the same data, so it is almost like it is seeing the inventory subform as the main form. I have tried deleting the duplicate record from the main form, then it deletes the 2nd entry of the subform. I have attached a pdf with a print screen of the 2 duplicate records with the same fiscal year and project name.

I have another form called Notes that has a similar relationship, but doesn't have this problem. I think it might have something to do with the conversion. I originally created the database with Access 97 and we are now using Access 2007. Am I missing something that needs to be done in Access 2007 to link the 2 forms, so I can enter records in the subform without duplications?

Also, the database is split so there is a back end and front end. I have all the tables and relationships set in the back end.

View 5 Replies View Related

Forms :: Default Entry Into Subform Based On Data Entered In Main Form

Apr 23, 2014

I have a form that request the User to enter a Parcel ID number (99-9a-99-99aaa-aaa-aaaa). The sub form asks for the subdivision number, block number, and lot number. The subdivision number, block number and lot number are normally part of the Parcel ID number but sometimes they can be different. I want the sub form to fill in the Subdivision number, block number, and lot number as a default but allow the user to change the value if needed. currently the sub form will only show what is entered into the table itself if a change is made on the main form the sub form does not reflect the change.

View 3 Replies View Related

Forms :: Listbox Data Cannot Be Saved In Table

Aug 11, 2014

I have a trouble to save data from Listbox to table. I can select mutiple data from Listbox, but the data cannot be saved on the table.

Here is the detail infor:

FORM name: Attendance
FORM record source: TBL_Attendance
Listbox Name: ARR_Result
table for Listbox to use: TBL_ARR

I want to these multiple records which come from Listbox (data on the TBL_ARR table)to be saved in table TBL_Attendance.

View 8 Replies View Related

Forms :: Option Group Data Not Being Saved To Table

Jul 14, 2013

Not all the choices (numeric codes) for my form's option box are being saved to the associated table.

I am using the options choices in the option group to enter data into a table and do additional things - clicking one option is supposed put a code in the table and then take you another form, while clicking a different option will make a new option box visible so I can collect additional data.

My option group has three options, only the data from the second option, which makes a second option group visible, is being saved in the table. If someone clicks on the first or thrid option, which takes them to another form, the data from that option choice does not get saved to the table.

View 2 Replies View Related

Forms :: Bringing Entered Data From One Textbox On Form To Textbox On Another Form

May 17, 2013

I currently have two froms, "add record" and "add record cont." The reason I have two seperate forms is because when clients create a new record information needs to be saved to two different tables and when creating one from with fields from both tables I ran into many problems. The two tables are named : tblMain, tblFileLoc Currently there is a textbox on both forms named "fileID" the FileID in the first form is from tblMain and is the primary key for that table, the FileID on the second form "Add Record Cont." is just a normal field. When clients enter in the new FileID in the first form "Add Record" and then move onto the next form "Add Record Cont." i need access to bring the entered FileID from the first form and Fill it in the FileID field in the second form. Currently I have tried making the control source for the textbox on the second form = the textbox on the first form but it brought up an error.

View 1 Replies View Related

Comparing Data Entered Daily With Data Entered Monthly?

Jul 30, 2012

I am fairly new to access but so far I have been able to get what i need from it, until now. I am trying to find a way of comparing two sets of data to find out an employee's average productivty.

Table 1 -Hours Worked (by day)
- contains 'name' 'date' and '# of hours' worked
- an employee would enter the hours here on a daily basis

Table 2 - Contracts Keyed (by month)
- contains the number of contracts worked that is derived from seperate system
- this is entered on a monthly basis (so for example: John keyed 30 contracts for the month of January)
- the system i am pulling this info from does not have the ability to pull a daily count of contract per employee, only a range of dates and it then provides the sum for that range (unless I ran a query for each day, for each employee which would take me hours)
- employees dont have access to this system to enter their own # of contracts keyed on a daily basis.
- for entry, so far i have just been putting the first of the month and then the # of contracts.

In a nutshell, this is the calculation I am trying to create:

(Sum of "# of hours" for the month) / (total "# of contracts keyed" for the month) = employees average hourly productivity.

I have tried to do this with various types of queries and reports but with no luck, I get a prompt saying that access can't compare the 2 fields.

Is there a way to compare the data that is entered daily with the data i would enter monthly?

View 2 Replies View Related

Data On Form Not Saved Fast Enough For Display On Report

Nov 1, 2004

I have a purchase order form that has a subform embedded. After users have filled up the form, they click on a button that will open up a print preview of a report. The report shows the details of the form they entered. However, all the fields on the parent form that are filled up after filling up the subform are not displayed on the report.

The reason is most probably that they have not been saved yet. How can I solve this problem?

View 2 Replies View Related

Modules & VBA :: HTML Of Login Form - Data Saved As Back End In Access

Oct 8, 2013

Can i make an html of login form, whose data is saved in access as back end. I am curious to know. but of course simultaneous saving is considered yes in here...

View 1 Replies View Related

Forms :: Value List Values In Form Not Saved In Tables

Feb 11, 2015

I created a form with subforms that are all linked to their own tables. Values that are entered in to the form (i.e. just numbers or names) all save into the tables as I would expect; HOWEVER, all of my value lists (0,1,2 or 1-5) do not. I can change the values in the forms and as long as I am toggling between them they appear in the form but they are not populating the tables.

Other details. They are defined as numbers in the property table, I did change them to a value list in the form properties and did assign values to the property list.

I looked through some other threads that seemed similar but the solutions didn't apply. Because the straight up data entry saves, I feel like it is something specific to me creating those value lists...

View 2 Replies View Related

Forms :: Warn User When Data Being Entered 3 Times

Oct 24, 2013

I am making a simple database for the computer laboratory in school (my place of work). Actually it is a Automated Logbook System. Here's the Problem. I want to make a form that will prompt me whenever I enter the data(ID number) of the user(student) 3 times already for the current week.

The message box will more likely prompt.

The Data already entered 3 times this week!!!

View 14 Replies View Related

Forms :: Append Data To A Table Entered By User

May 20, 2013

How I would go about appending data to a table that has been entered by a user on a form.

My initial idea to tackle this was to create a number of text boxes as a method of user input which would all then transfer to a table but this doesn't have much longevity to it(if the database requires additional columns to be added, etc.)

The setup at the moment is two tables, a main table, and a temporary table(which is where I intend to first store the user input, this is so that the user can view what they have entered and make any necessary changes(undo))

I'm wondering if there are any easier ways to go about this such as, a msgbox appears and asks the user to enter each individual column data for a row. This doesn't sound like the most efficient way but efficiency isn't a priority right now and is something I'll look at later.

I'd like it so that a user can input data into a number of text boxes, a button has an onclick event that will append all entered values to the temporary table, this is then relayed(I'm assuming through requery?) back to the user as a way of checking before really adding it to the main database, and then if they're happy there is another button which is then enabled so they can add it to the main database.

View 9 Replies View Related

Forms :: Tabbed Page Change When Data Entered?

Mar 15, 2013

On that form we have 4 tabbed pages, 3 of which get used regularly. Unfortunately though, the Notes page does not get used very often. The reason is because people say that they don't want to click on the page if there is not going to be any information there to read, and they don't want to enter information if no one is going to read it.

Therefore, I was wondering if there was a way to have the page name, "Notes", change color if notes have been typed? Or, maybe an asterisk (*) shows up next to the page name if notes have been typed.

View 6 Replies View Related

Forms :: Save Data Entered In Unbound Text Box?

Jun 3, 2013

I have a form with some vertical unbound text boxes, they are table headings for my data, but they need to be editable. I can enter data in them perfectly but once you close the form the data is lost. I would like the data to be saved on the form. I have tried turning them to labels but then they are not editable. What should I try next?

View 5 Replies View Related

All Data Entered On A Form To A Table

Sep 11, 2007

I have a form with several tabs on it, where the user enters various info.. I want to have the user hit the save button and have all info saved to a single table. Is there an easy way to do this. Please excuse my ignorance but I am fairly new to Access. Thanks in advance!

View 9 Replies View Related

Verify If Data Was Entered On Form

Oct 18, 2004

Hi all..

This is my first question posted on this site. I have created a survey with questions to be answered. The database is already populated with records of the people's names who were getting the survey. What I need is when the data entry clerk brings up the customer's name on the form, is that they are forced to enter the surveys answers for certain questions before they click the "Save" button. The answers are set up as radio buttons on the form (ie Less than 6 Months, 6 Months, 8 months and 1 Year).

Not sure if a Before or AfterUpdate macro is needed?

Any suggestions would be appreciated. Please email me directly if you have code.

Thank you

View 2 Replies View Related

Data Entered In Form To Record Source

Aug 26, 2005

I have a form where users enter data in various ways - combo boxes with drop down selections and text boxes where users manually enter some data. I also have several text boxes that return "answers" based on calculations from user entries mentioned above. The form is bound to a table where all the entered data is stored. I'm having trouble saving the calculated information to the bound table. It's easy in all the non-calced boxes, I just put the column name of the bound table in the control source, but in the calculated fields, I already have the formula in the control source. How can I identify the proper column to save the data in this case.

Thanks!

View 5 Replies View Related

Preventing Opening A Form Unless Data Is Entered? And Some Other Q's.

Oct 29, 2006

Hello again,

I have three questions this time 'round:

1. I'm in need of some way of preventing a user from opening form B unless he has entered information in form A.

Right now it is possible to open form B without entering data in form A (form A being the date/time info and form B being the case technical info) due to which a record is created for clientnr 0 (which should be a non existing client). Querying for clientnr 0 from time to time and deleting those records is easy enough, but who knows what kind of relevant data could be stored accidentally in a record that doesn't belong there.

This happens by the way, even though referential integrity is enforced throughout the dbase. Maybe I should say, because of that. I want to keep it that way of course to prevent orphans roaming around. But having orphans for clientnr. 0 is also not a good idea.


2. What is the wiser thing to do: keep all information concerning one case for one client (date/time info per case, techinfo per case, maybe even products sold info per case, payment info per case) in one table and have the data needed for each thing entered in seperate forms, or have all data split up into seperate tables like I have now. One for clients, one for dates and times, one for the technical info for that case etc.... ?

It is starting to seem a bit ehrm... useless to have all that data for one case floating around seperate tables. I don't know... it seems so much more complex (having to create multiple relations, multiple PK's per table etc.).

Where do I draw the line? For example the image attached (relationship2.jpg): now I have one PK in the table holding the clients (clientnr), two PK's in the table holding the case date/time info (clientnr and casenumberdatetimeinfo), three PK's in the table holding the techinfo (clientnr, casenumberdatetimeinfo and casetechinfonr). And what's next? Four PK's in the table holding the sold productsinfo? Five PK's in the table holding the invoice info? And what about the relations between those tables? Right now I can still comprehend.... but when I start thinking ahead, I'm starting to get dizzy. So some advice on this would really be highly appreciated.

3. Which build up of the relations between the tables in the dbase is better? The one in relationship.jpg or the one in relationship2.jpg?

View 8 Replies View Related

Problem Saving Data Entered In Form (db Attached)

Aug 3, 2006

Can someone go through my forms and help me figure out why I cannot submit the entered data. Whenever I try to test my system and enter in inspection information I get an error that says....

"The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data and try again."


Steps:

1.) Type the given sample account number in the blue box
2.) Click "Search Acct #" button
3.) Click "Test" button
4.) Enter random info on the test form
5.) Read error message
6.) Help Ken_C :D

Thanks in advance :cool:

View 4 Replies View Related

Clear Previous Data Entered In Parameter Form

Dec 16, 2013

I have a parameter form I used to enter data for a query. I want it to clear any previous data entered when it opens. I have tried the below without success. I also have the fields defaults set as "" and the form set at yes on data entry.

Private Sub Form_Open(Cancel As Integer)
Me.BldgCmb.Value = ""
Me.StateCmb.Value = ""
Me.CityCmb.Value = ""
Me.AddCmb.Value = ""
End Sub

View 3 Replies View Related

Forms :: Disabling Fields In Access Based On Data Entered In A Previous Field

Sep 9, 2013

How to disable fields in Access based on data entered in a previous field? For example if "yes" is chosen from a drop down show "Date field" if "no" is chose hide "Date Field".

View 2 Replies View Related

Using Form Data In User-Entered Query Search Criteria

Dec 20, 2006

I am attempting my first access database which tracks blood components in our medical facility. When a component is issued to a patient there is a button to push which links to a report that runs a query. The user must enter the unique key for the component at a promt, which ensures the report generated will be for that component only. My question is if there is a way to cpture and use that key automatically when pressing the button. If I need to clarify something, please let me know--I may not have the Access developer lingo down yet...

View 2 Replies View Related

Modules & VBA :: Checking If Data Entered In Form Field Exist

Jan 17, 2015

I want to check if data entered in a form field is existed

The form is bounded to a table

I used this code

If DLookup("Telegram_Number", "tbl_Violation_Of_Building", "Telegram_Number Like " & Forms!frm_Add_Violation_Building!Telegram_Number) Then
MsgBox ("number existed")
Me.Telegram_Number = ""
Else
End If

everything is ok but if the data is existed the database show the message and clear the field but i'm getting a Run-time error

'-2147352567(80020009)': the macro or function set to the beforeupdate or validationRule property for this field is preventing [ISF] from saving the data in the field

I guess the problem because the form is bounded to a table so he will save automatically

My solution is to unbound the fields and save the data via vba but is there any solution with a bounded form???

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved