I have 4 fields that are unbound on a form. img1 img2 img3 img4..When these are entered they are all combined and autofill another unbound textbox = imagename.. what i would like to do is from this unbound textbox 'imagename' ..i would like to populate a textbox that IS bound called FileName
[Event Procedure]
Private Sub imagename_Click()
Me.imagename = Me.FileName
End Sub
I've created a data entry form w/ 7 fields.... [f1], [f2], [f3], [f4], [f5], [f6] are bound to a table. While [f7] is unbound and has Nz function.
Now, the value of [f7] is the summation of [f1] to [f5], i want that what ever value is generated by [f7] will be stored on [f6] in both forms and table...
One of my forms has a text box which is bound to a field called teenumber. This form is set up that "on current" has code
If Me.teenumber = 0 Or IsNull(Me.teenumber) Then
Me.teenumber = Nz(DMax("teenumber", "tblteeofftimesshotgun"), 0) + 1
This enables the text box teenumber to be auto filled with sequential numbers growing by 1 for each record. This database is for a golf tournament and this form enables user to set up tee times for shotgun start for the players.
When the user gets to tee number 18 or whatever the last hole on the course is the teenumber field needs to be reset to 1. With the above code I a unable to do this.
Is there a way to create a text default value for a control box that is bound to a number field?
I have a combo box that is bound to an auto number ID but displays text. Bound column = 1, Number of column = 2, Column width = 0; 4cm
I want to use sample text in all my controls (and I know an alternative would be to use the control tip text). In a text box it is easy, I just set the default value to that value and then a before_update event considers the text box empty if the field value is the default value (e.g. Name text box has: Name... as default value). This doesn't work with my combo box since the bound column is a number. I could create a value in the table but then it would appear in the drop box and it is messy.
[URL] .....
I have several combo box fields in a bound form where they are selecting values from a list (values stored in a separate table) and then loading a number into the bound table field when selected.
How can I put a text prompt in these fields when loading the form which gets removed when focused and of course is not permitted to attempt a save into the bound numeric fields? I've done quite a bit of searching but can only find materials about doing this on bound text fields. I've also seen solutions using Nz which don't seem to work.
I have a Continuous Form with an Unbound TextBox, its Data property has
Quote:
=DLookUp("price","tblPrices","SupplierID = 1" And "ItemID = [itemID]")
The form Data is based on tblItems..I am getting one price for all the records. I expect to get the correct price for each item.
I have a form that contains a combo box (cboEmployeeName) that pulls data from a query and populates three text boxes (Work Area, Last Name, First Name), This part works fine. Because the text boxes are being populated by the Combo box, they are not bound to the record source tblTrainingSchedule). I need the info that is in the text boxes to populate the respective fields in the record source.
I tested by adding "=tblTrainingSchedule!WorkArea=[cboEmployeeName].Column(3)" (column 3 is the work area) to the "after update" control but it does not populate the data.
I have a continuous subform with an unbound Concat textbox and would like to populate another field for each record with the results with a main form button onClick event.
How do I accomplish this?
I am trying to create a login form with the following three basic fields:
txtUsername
cboUsertype
txtPassword
I would like to be able to populate cboUsertype with User types associated to the user I type into txtUsername. I have found many useful tutorial on the web on login procedures. How ever I hardly found anything on how to populate a combobox after updating a texfield. It bis more than a week that I am trying to find a solution but until now I have just been . I would be grateful if you could provide me with either a link on the web or a vb code to make it work.
I am running in to a brick wall with this. I have an unbound text box with the control source set to =IIF([text42]=0,0,[text42]/[text44])*100 and in continues to return a #name? error.
I am not sure how to get this expression to work. I have even tried to put =[text42]/[text44] and I still get the #name? error.
I have a form with a button that pops up a datasheet with a number of records. I need the dbl click event to populate a hidden text field with the id of the item that was double clicked.
Ive found the double click even and can get the double click to close the window, but i need to populate the text field as well.
My database has Main form and a Sub form. On main form i place one unbound text box named investigations. In subform of which datasheet there is a column named TestCode. I want unbound text box (Investigations) to display row values which selected in a column (TestCode) of subform.for example:Investigation field should display "CBC,HB,ALP".
View 5 Replies View RelatedI have a Form Display Data in my Access Database, which is working really well. However, users was asking if there is a way we can make Font Color Could/would change if The text in A field or Any field in my display form contained the word "SAD or MAD". Is there code for such thing in display form?..
View 3 Replies View RelatedI have a tabbed form from which the user can select a contact's record from a subform on the first tab, click a edit command button, and the unbound text boxes on the top of that tab populate. The user can then click the second tab with employment history which has blank unbound text boxes and another subform which is linked by the contact id to the first tab.
The user can select a record in the second tab, click a command button and the text boxes populate no problem. The problem comes when the user changes the contact on the first tab, and then tries to edit a record on the second tab. Then I get a run-time error '-2147352567 (80020009)' saying the value you entered isn't valid for this field. Why it would work the first time by not the second?
I am trying to search on EmployeeID field and populate corresponding data like EmployeeName, EmployeePay in other text boxes in the same box .
In my Unbound Form I have three unbound Text Boxes and one Command button:
txtEmpID
txtEmpName
txtEmpPay
cmdFind
In my table EMPLOYEE i have three fields
EmpID -- Autonumber
EmpName -- Text
EmpPay -- Text
Hi
I've created a listbox and am using the following code
stWhat1 = "": stCriteria1 = ","
For Each vItm1 In Me!LstArchive.ItemsSelected
stWhat1 = stWhat1 & Me![LstArchive].Column(0, vItm1)
stWhat1 = stWhat1 & stCriteria1
Next vItm1
Me!txtCriteria1 = CStr(Left$(stWhat1, Len(stWhat1) - Len(stCriteria1)))
The problem is that my bound column is a text field. I'm really struggling on where to put my quotations so that I get the following with the In function
In('00638','00639').
Any help or pointing in right direction would be very much appreciated
Carrie
I have a form with two text boxes and a button. I want to be able to type a value into the first Text box click the button and the second text box to be filled with the value which is stored in the Table.
The first Textbox is called barTxt, The second Textbox is called CustTxt The button is called SearchBtn and the Table is called BookInTable. I have been trying to use the code.
Code:
Private Sub SearchBtn_Click()
DoCmd.FindRecord Me.BarTxt.Value, , True, , True
CustTxt.Value = "SELECT BookInTable.Customer FROM BookInTable " & _
" WHERE Customer = """ & Nz(Me.BarTxt) & """" & _
" ORDER BY Customer"
End Sub
This however instead of displaying the Value for customer which is stored in the BookInTable. Displays The code SELECT BookInTable.Customer FROMBookInTable " & _ " WHERE Customer = """ & Nz(Me.BarTxt) & """" & _ " ORDER BY Customer"
I want to enter text in an unbound text box and for it to be repeated in another on the same form.
View 6 Replies View RelatedI have only one bound text field in my report. By default, it shows the results (150 records ) vertically. I wish to show them horizontally, 5 in a row. How to do this.
View 11 Replies View RelatedHi,
I have a form that has a list of sitting on when you select a sitting I would like to produce list of centres that are registered with that sitting. I would like to do this by having an unbound text box. I need to do it this way for part two.
So I have
SittingID The user can select a sitting from the combo box of sitting ID. I have this code behind the combo box to look up the sitting details:-
Me.RecordsetClone.FindFirst "[SittingID]=" & Me.cboSittingID
Me.Bookmark = Me.RecordsetClone.Bookmark
I then have a table that holds all the centre that belong to that sitting this table has the Centre ID and the sitting ID I would like the user to select a sitting using the combo box and then the unbox text box populates with:-
CentreName, CentreNumber, VenueName, any idea's how I go about this one. Thanks
happy friday to all! I may just be missing something simple here but not sure what. I have a form with an option group of radio buttons, an unbound label, and an unbound text field.
If radio button A is selected, the the label and the text field become visible. no problem with this.
when they become visible, I want to be able to enter a string into the unbound text box, and use that data to populate a query from. I know how to do this also.
No the problem: when the textbox becomes visible I can't type into it?
Any thoughts?
Thanks
Kevin
Hi All,
I hope someone can help me.
I have a table here tblTemp with a field client. This table can have from 1 to 100 records at times as it keeps getting cleared for the purpose of this exercise.
I also have a form frmLabel1Data with an unbound text box txtclient.
I was hoping to get the first record of the table into this text box upon opening the form.
I tried creating a query which gave me the following sql;
SELECT First(tblTemp.client) AS FirstOfclient FROM tblTemp;
I also tried placing it in this code with no luck
Private Sub Form_Open(Cancel As Integer)
Dim SQL
SQL = "SELECT First(tblTemp.client) AS FirstOfclient FROM tblTemp;"
MsgBox SQL
End Sub
Does anyone know why I cannot see the same result as when I open the query it gives me my client name but the code above does not????
Any help is appreciated.
Robert88
I have a text field that I would like to have some information automatically populated when the form is open. I know the basics but the trouble I am having is having the date and time populated before the default text.
Here is what I tried but no luck on it
Code:
Private Sub Form_Load()
Dim strQuery As String
'Dim js As Integer
Dim currDateTime As Date
currDateTime = Now()
Me.Description = " & currDateTime & " & " " & "J.Adams 41066 CLT SMB - AM : " & " " & ""
End Sub
Hi,
I want to show some text from another table based on the values of the bound fields in each record of a continuous form. I thought it would be easy, but I can't get it to work.
I step through the records in the bound recordset and use some of the values to query another table. Then I use the value from the query to populate the unbound text field.
It works fine for each record. But every time the unbound field is updated, all the records in the continuous form are updated.
I'm stuck on this one. It's probably something simple to fix - if you know what to do!
Do you have any suggestions?
Thanks!
-Daniel
I have a field on frmOutpatient which is called EpisodeID.
I need to populate this field from a selection in a pop-up form.
The pop-up form (frmSelect) is a continuous form with a number of different EpisodeID numbers according to the date the patient was admitted. At the end of each record I want to put a command button (cmdSelect) and when pushed I want this SelectEpisodeID to be transferred to the field on the frmOutpatient.
Any ideas??
I have a continuous form with a text field that says "Select". There are two other fields, one of which is Brand. When the Brand Combo box has nothing in it I want the text box to appear (instructing the user to select a Brand) But once the user selects a Brand and goes to the next records, I would like the "Select" in only that record to become not visible. I tried conditional formatting but can't apply that to an unbound control ( or at least it is grayed out when I select the text box) and any other possible solutions I have found changes all of the selects - not only the one in the changed record.
View 7 Replies View Related