I have a form "WorksheetList" that has a list of records upon which when one selects a record a new form opens "Worksheet" with the data from "WorksheetList" everything seemed to be working fine then suddenly I get the error "Method 'item' of object 'forms' failed"... Here's my code:
Method 'Collect' of object'_Recordset' failed is the error I am getting when I try to set a record field to a form text field that has the system date set to it.
Specifically.
yrst is the recordset
I set a number of recordset fields to values on a form with no problem.
Included on the form is a field "txtNewUpdtDt". The control source is =Date()
The statement that is failing is yrst!SysUpdtDt = Me.txtNewUpdtDt
This had been working until today. I googled the error message and found a lot of hits, but none that specifically addressed my situation.
I am attempting to pull data from an XML file via VBA without doing the import on external data. I created a blank table called "tblHolding". In theory, my code works the way i want which is: User clicks button, file explorer opens for them to select the file, imports data to "tblHolding", and msg box saying complete.
It runs through the code but doesn't import. It errors at the below code. Also, where do i reference the table so I can append the data.Fails saying method importxml of object application failed
Code: Private Sub Command234_Click() Dim strFile As String 'Filename Dim strFileList() As String 'File Array Dim intFile As Integer 'File Number Dim strPath As String ' Path to file folder Dim f As Object
Getting an error on the rst.Open statement of "Method 'Open' of object '_Recordset' failed"
I am using the same code that I have used before, just tweaked some. Earlier I had an error because the ActiveX control was not checked off for the ADODB connection.
Below is the code...any ideas? THANKS!
Dim Conn As ADODB.Connection Dim rst As New ADODB.Recordset Dim lg As String Dim frmOffset As String Dim tagnm As String Dim sql1 As String Set Conn = CurrentProject.Connection
frmOffset = "3. Offset Printing" lg = "PT" tagnm = "Label22" sql1 = "select translation from translation where lang=" & "'" & lg & "'" & "and formname=" & "'" & frmOffset & "'" & " and tagname=" & "'" & tagnm & "'"
I want to disable a button right after click it. Because I could not disable a control that has got the focus, i tried to shift the focus to another control; however, all controls that I tried to shift the focus to don't support the method (SetFocus = true).
I want to do this on a subform's control, but I keep getting this error: Object does not support this property or method.
I am currently building a database for the company I work for that is fairly similar to the Northwind Database; however it is made from scratch so hopefully some of the common problems with that database won't find their way into mine.My problem is that when I go to my Orders form, I pick a customer from the main form, which creates a record on the Orders table. When I then go to the subform to choose a product/line item, I get the error in my title ("The LinkMasterFields property setting has produced this error: 'The object doesn't contain the Automation object 'OrdersT.") as soon as a product is chosen from the drop down list.
I have a series of reports that are built to replicate the order forms of our suppliers. On each I have a text box for Air Freight that I only want visible when the airfreight ID is ticked.
I have this working fine using an if statement on the Load Event of the reports. However when I use the OutputTo command in VBA it seems to bypass the Load Event. Any event that is triggered using OutputTo.
I have also tried setting the .visible in VBA but can't get the coding to work as I am using a variable report name depending on the SupplierName and when I try to use the Reports! nomenclature it will not accept the Report name being a variable (ie. Reports!ReportName![Airfreight].Visible where ReportName is a variable).
I have a strange behaviour on a module which reference to Microsoft Outlook Object Library 14.0. The below code got an error 461 on the folderoutlook.display code,i.e. the method is not found. The funny thing is that the same code gives no problem in another accdb file, exactly same code with same reference on same machine.
Set appOutlook = GetObject(, "Outlook.Application") Set appOutlook = New Outlook.Application Set namespaceOutlook = appOutlook.GetNamespace("MAPI") Dim folderOutlook As Folder Set folderOutlook = namespaceOutlook.GetDefaultFolder(olFolderInbox) FolderOutlook.Display
I am trying to format an excel spreadsheet through access, specifically trying to convert a column from text to dates (I receive the data in text format and need to translate it to dates).
Code: Dim excelApp As Object Set excelApp = CreateObject("Excel.Application") excelApp.screenupdating = False excelApp.Visible = False Set excelWB = excelApp.workbooks.Open("Z:DataBasicSMData.xlsx")
[Code] ....
I'm no longer getting an error, but it isn't actually modifying the spreadsheet...
I am receiving the Method or data member not found error message when I attempt to add a new record in form view. I have been working in an old 2002-2003 version of Access until last week when it was converted to 2007. The old version allowed for additions just fine but now after the conversion something is wrong. The code is below. I underlined the line throwing the error message (FindFirst). Code is not my strong suit.
'Open form to new record gstrCallingForm = Me.Name strDocName = "frmNewApplicant"
I am trying to locate a record on a multirecord form by using Findfirst method. Here is the code.
Dim UA1 As String, UAE1 As String, UA2 As String, UAE2 As String, UA3 As String, UAE3 As String, apost as string, repl as string apost = "'" repl = "''" UA1 = Nz(Forms(ParName).Form.NAME, " ") UAE1 = Replace(UA1, apost, repl)
[Code] ....
This code sometimes works and sometimes it does not work. The field CNO is a text field of 5 characters but contains the card numbers that is numeric data or nothing.
I have a form (frmTimecardsDataEntry3*) that needs to requery combo boxes to narrow down the selections offered in the dropdown of each combo box.
It is a data entry form. I.e. Dataentry is set to yes.
The ClientName combo box has an after update event which requeries the matter combo box, so that the MatterName combo box dropdown only shows the matters relating to that client. This works just fine.
The MatterName combo box has an after update event which requeries the Rate combo box so that in the Rate combo box dropdown only the hourly charge rates relating to that matter are shown. That works too. So far so good.
I then tried adding another after update event to the MatterName combo box, so that another combo box, Application, was requeried too, so with the Private Sub it looked like:
Rate.Requery Application.Requery
But this resulted in the error in the title to this post and the debugger highlighted in red the word Requery in the phrase Application.Requery.
I thought maybe Access does not allow two requeries resulting from one after update event, so instead I took Application.Requery out and placed it as an after update event in another combo box which did not have any other after update events to run.
However, this resulted in the same error.So the error appears to have something to do with trying to requery the Application combo box but I cannot see what is causing the error.
The Application combo box SQL is:
SELECT Applications.ApplicationID, [ApplicationDate] & " " & [ApplicationName] AS ApplicationDisplay, Applications.ApplicationDate, Applications.ApplicationName, Applications.MatterName FROM Applications WHERE (((Applications.MatterName)=[Forms]![frmTimecardsDataEntry3*]![MatterName])) ORDER BY Applications.ApplicationDate, Applications.ApplicationName;
This is the same arrangement of SQL that I am using on the other requeried combo boxes that work. When I take the WHERE statement out of the Application SQL and run it the query returns all of the applications.
I am not sure what the error code is trying to tell me about the attempt to requery the Application combo box.
I have a yes/no box in the form and when the firm is first opened it has a small square dot in it, but as soon as any data is entered in the form the dot clears and leaves the usual empty tick box that you would expect to see.
Also, another possible symptom is that I had another version of this form previously working quite well except that when I did several data entries all at once, so I had several forms filled in with different data (before refreshing and thus entering the data in the table), when I scrolled between the forms I kept losing the MatterName data when I scrolled back, and then when I re-entered the ClientName data the correct MatterName data returned without me having to use the dropdown to select it.
I have had an earlier simpler version of this form working for some time, with ClientName requerying MatterName and MatterName requerying Rate, and I am using the same SQL structures in the new form but getting the error in the title to this post and the other isues just described.
I am getting method of data member not found for the following code when inserting values to a table. Form has three frames. Add/Insert is on OnClick Event.
I want to select an item in a listbox that has a specified value when I open the form that contains this listbox. Most I've found describes selecting records based on their index value but I want to select an item according to the actual value that's displayed in the listbox. For example, the first number below is the index value, the 2nd is the number I'm interested in and the 3rd is another column in the listbox:
0 1 12345 1 2 33256 2 4 36280
I'm using the OpenArgs property to pass the value (a long integer primary key) to the opening form but I don't know the syntax or correct terminology for ensuring the specified row is selected in the listbox. At present, using the above example, if I want to select the row with the value 2, it's selecting the 3rd row rather than the 2nd.
I have set up a form that allows me to enter information on an item. This form is for initial entry, like an asset item. In this form I have a field for status of the item and the condition of the item.
Where I am having trouble is being able to bring the item up and change the status of the item if it is broke or damaged. I have the item as [label] and set as the primary key. and an item as [studentid] as a foreign key. I also would like to be able to query the different status'.
I am confident I can set queries up but I need to figure out how to recall the [Label] change the [status] and save it. The only other thing that I could hope for is to track then number of times the [status] was changed.
I have a list box on a form and I would like the user to have the possibility to add another item not from the list into the table using a command button. How can I do that?
I have a combo box that won't allow me to select an item. The box is on a subform. When viewing only the subform, it works. When viewing the subform from the main form, it won't work.
I am trying to create a form for a query so that I can filter on a chosen record and have the data presented in a more reader friendly format: the idea being that I have the common data show once in the form header and the rest show in the detail section (kind of like a form with subform type)
First I tried using the form wizard to create a Tabular layout form which I could have easily customised, but I am unable to use this because I get an error message telling me the wizard cannot create my form due to me choosing too many fields.
In my next attempt, I elected to use the Multiple Item form option, which seems to work OK but presents the following problems:
1) It has not included all of the data fields in my query... though it looks like I can add these manually 2) I am unable to reorganise the text boxes and labels the way I would like, as they all seem to be locked together Is there a setting somewhere that I can change to stop this from happening?
I have a list box contains 10 times . I have UP and Down buttons to move item up and down. My VBA works only if i set listbox multiselect property to 'None'. For the multiselect=simple option it throws error like in valid use of null in this line of code :
sText = lbfNames.Column(0, iIndex)
My VBA
Code:
Private Sub cmdUP_Click() Dim sText As String Dim iIndex As Integer iIndex = lbfNames.ListIndex 'check: only proceed if there is a selected item
Is it possible to remove an list item from a combo box list after it has been used.
What I am trying to do is use a combo box that has a list of questions, after the user selects a question from the combo box list and answers the question when they reselect the combo box that question will not be seen again till the form is reloaded.
My form utilizes five list boxes. The user must choose from each of the five list boxes in order to filter out a specific product from a products table.Every time the user makes a selection, the next listbox is filtered, and set focus to. Each listbox often contains more than 1 choice within it, however, there are a few cases where there is only 1 choice to be made.
How can i determine with code when a particular listbox only has 1 choice so that I can have the choice be made automatically and then set the focus to the next listbox in the series?
