I need to populate a text box with data from a single cell contained in a table.Im hoping to use two combo boxes that when selected will select the cell. The combo boxes select data sources from the same table. One combo the row the second the column. One combo is already in use and populates several fields in the form. In the same form I'd like to place the second combo and beneath it have a text box that will populate with that cell detail.
I have a form called frmPO based on a table called tblPO One of the fields in tblPO is linked to the field idAddress in the table tblAddresses
The following fields exist in both tblAddresses and tblPO Company Address1 Address2 City ZP State
The form contains controls for these fields on tblPO. I would like to give the user the choice to either enter a shipping address manually, or selecting a preregistered address from tblAdresses. For this I would like a combo box showing the values of idAddress. I f a user selects a preregistered shipping address, I would like the form to fill the rest of the fields based on the value of this control.
My understanding is that I should set a BeforeUpdate event to set the values of the different controls, unfortunately my command of VBA amounts to 0.
I have several comboboxes (6) on my form.How to populate these comboboxes with values depending on selected value in previous combobox.
Example.Lets say that you select value "Audi" in combobox 1, then available values in combobox 2 should be "A4","A6","TT" etc. and if you selected "BMW" in combobox 1, then available values in combobox 2 should be "3-series", "5-series" etc...
I have a form with two text boxes and a button. I want to be able to type a value into the first Text box click the button and the second text box to be filled with the value which is stored in the Table.
The first Textbox is called barTxt, The second Textbox is called CustTxt The button is called SearchBtn and the Table is called BookInTable. I have been trying to use the code.
Code:
Private Sub SearchBtn_Click() DoCmd.FindRecord Me.BarTxt.Value, , True, , True CustTxt.Value = "SELECT BookInTable.Customer FROM BookInTable " & _ " WHERE Customer = """ & Nz(Me.BarTxt) & """" & _ " ORDER BY Customer" End Sub
This however instead of displaying the Value for customer which is stored in the BookInTable. Displays The code SELECT BookInTable.Customer FROMBookInTable " & _ " WHERE Customer = """ & Nz(Me.BarTxt) & """" & _ " ORDER BY Customer"
I have a data entry form that is also used for editing exsisting records, upon the opening of a record the form populates with all the data of the record apart from what is previously selected in combo boxes, so I need to find a way to re-populate those comboboxes?
I currently have 3 tables within a database with student details of three different classes. I need to create a user form that has a dropdown box which I can select a student from one of these tables with a number of text boxes below which brings up all the students details, then once the student has been selected and the correct details are shown then I need to create a button which allows me to move that student from one table to another.
there is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
I have a tabbed form from which the user can select a contact's record from a subform on the first tab, click a edit command button, and the unbound text boxes on the top of that tab populate. The user can then click the second tab with employment history which has blank unbound text boxes and another subform which is linked by the contact id to the first tab.
The user can select a record in the second tab, click a command button and the text boxes populate no problem. The problem comes when the user changes the contact on the first tab, and then tries to edit a record on the second tab. Then I get a run-time error '-2147352567 (80020009)' saying the value you entered isn't valid for this field. Why it would work the first time by not the second?
I am newish to background coding in access 2010. I have a call log with a form which is where the information on the caller/area is entered. There's a combo box that needs to populate a textbox with 3 different things, depending on whats selected. I'm using If,Then, Else.
The first selection needs to just have the textbox say something. I have that figured out with:
If Me.CboSource = "..." Then Me.Title = "..." (cboSource = combo, of course, and Title is the textbox.)
Next is where I'm fuzzy....The second selection needs to have the textbox populate with a dropdown list of choices from another table. No matter what I do, nothing is working. My latest attempt is:
ElseIf Me.CboSource = "External" Then Me.Title = [tablename].[name]
I have 5 combo boxes that all cascade into the next, and then when the last combo box is updated from the drop down list, it auto-populates a text box. My issue is that I have a second text box that needs to be auto-populated from the same data table based on what has been entered into the 5 combo boxes and the first text box. I've tried creating parameters and setting a lookuprecord macro in my main table and then using a returnvars RunDataMacro on the actual form, but it says, "Invalid list or query reference 'BillingDataQuery'." I'm not sure if it's because I'm not setting that RunDataMacro on the wrong combo box, or if I've written it incorrectly...
I did this same technique (based on directions in a post from this forum) on another combo box that populates five text boxes and it works just fine, but I don't know how to get this to work based on what's populated in 5 combo boxes to auto-populate the last text box.
I am trying to create a login form with the following three basic fields:
txtUsername cboUsertype txtPassword
I would like to be able to populate cboUsertype with User types associated to the user I type into txtUsername. I have found many useful tutorial on the web on login procedures. How ever I hardly found anything on how to populate a combobox after updating a texfield. It bis more than a week that I am trying to find a solution but until now I have just been . I would be grateful if you could provide me with either a link on the web or a vb code to make it work.
I am trying to populate the text boxes in a form with data from a table based on the selection a user has made in a combobox. I am trying to do this through a DLOOKUP in the text boxes Control Source using the following:
I have two tables: tblWeightTickets and tblWasteType.
I want to create a form: frmWeightTickets, where a user can enter information and the data is stored in tblWeightTickets.
There are two fields in particular that I am working on ... "WasteType" and "Rate".
On the form, I want "WasteType" to be a combobox "cboWasteType" and when I select a type of waste I want the "Rate" textbox on the same form to auto populate with the rate amount for that particular type of waste (i.e. recycling, garbage, etc).
The Rate amount is located in the table: tblWasteType under the field name "Rate". How can I do this and at the same time store the information in the tblWeightTickets? I already have the combo box loaded with the types of waste - I just need it to populate the rate text box and store it in the Weight Tickets table.
I have a form with two combo boxes. The first box lists switch names from a query, and the second lists switchports from another query. The switchport query lists all the switchports for whatever switch is selected in the Switch Name combo box, and all the settings for that port (one column per setting). I want each text box to display the corresponding data from the switchport query for the switch selected in the first combo box and the switchport selected in the second combo box.
I have a form for user to select multiple items from a combo box, and 18 unbound text boxes , each time user selects an item in combo and hits "add" the value appears in txt box by order, I mean select1 then "add" filling txtbox1, select2 then "add" filling txtbox2 ... and so on till we reach txtbox18, then msg box appears that he filled the whole 18 boxe. I have already done this before for one txtbox which is a very simple operation, but i cannot figure out how to do it with multiple txtboxes.
I'm using three combo boxes - The second (cbosubSkillList) is limited by value selected in the first (cboSkillList). The third (cboSubSkillList2) to be limited by value selected in the second. The third will not populate - If I comment out the code, It WILL populate will all values, but will not populate with code active. All names, properties, etc. with combo boxes, tables, field names parallel - Why am I not populating the third box?
[Code] Private Sub cboSkillList_AfterUpdate() With Me![cboSubSkillList] If IsNull(Me!cboSkillList) Then
I have a form with ID, town and address on it. I want to beable to type in an ID, press enter then if the ID exists in a query then populate the town and address text boxes with the correct info..
If the ID doesn't exist, then open another form so the user can choose the site from the list..
At the moment I think I am going about it the wrong way :
And other time it wont work with On change but only with After Update Event (code is same).
Another thing this morning happens was that when I tried to add new record trough form where combo box and tex boxes are located, MS Office suddenly stopped working after selecting combo box selection (with message Microsoft Office has Stopped Working). It is 2013 version.
I got it work after deleting and re-inserting VBA code to autopopulate text box at After Update Event.
I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts 2. CompanyName (combo box) from tblListOfAircraftsOperators 3. TeailNumber (text box) from tblAircraftOperators 4. AirportNameSearch (combo box) from tblAirports 5. PassengersNumber (text box) from tblAircraftOperators 6. ManufactureYear (text box) from tblAircraftOperators 7. SourceSearch (combo box) from tblInfoSource 8. CountrySearch (combo box) from tblCountry 9. CategorySearch (combo box) from tblAircraftCategory 10. EamilToOperator (text box) from tblAircraftOperators 11. InteriorPhoto (Bound object frame) from tblAircraftOperators 12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
My company is finally using my accounts package (alongside our original package until we can be certain there are no bugs).
Anyway just adding nice to have features at the moment.
I've got a form that has 5 combo boxes where the user can select 5 customers. Then a button so they can graph the amount of money generated by each customer and compare them.
I've just made a query to return the top 5 highest grossing customers.
What I what to do now it feed the query results into the combobox values when I press a new button on my form.
I am working on a database where law clerks input the tasks that they accomplish each day. They use a form called "TaskDetails" to input all of the information related to their daily tasks via combo boxes. The problem I have is: often times the clerks work on the same task more than once and I would like them to be able to continue tasks already in progress - using notes to indicate what particular portion they completed that day.
In order to do this I would like to have a combo box that is based on a query of all of the tasks the clerks have completed. When they select a Task Name from the combo box, I would like all other combo boxes on the page to auto-populate based on the selection.The query that my combo box is based on includes all relevant fields.
When I click on the "Task Name" combo box I am presented with all of the records related to tasks. The fields/columns are divisionofwork, subcategory, workassignedby. I have combo boxes for all of these fields on the same page, bound to the table of tasks. Ideally, a clerk makes a selection from the "Task Name" combo box, and the subsequent 3 combo boxes will reference their relevant column in this selection and auto-populate.
I am in the process of (attempting) to develop a database and application for Parking & Violation Management. I have two tables at this point: "Parking Registration" and "Violations" that are linked by a "Permit #". I have developed a form that will allow the officer to enter either the "Permit" or the "Licence Plate" of a vehicle to run a "Vehicle Check" query to produce specific information for the vehicle in question; which is what I wanted, kind of... The problem is that the resulting data pops up in "table" format, and contains multiple fields, making review of the data difficult due to its lengthy, linear nature. Is there a way to have those results appear in text boxes either on a separate form or the "Vehicle Check" form itself?
Hi guys, I have a related databes with about 20 tables.
My main table stores the data linking with most of the other tables. This main table stores football match records with player line ups. Initially I had a problem linking the 11 player fields in the main table to the player table, Icould only do it with 1, so someone at work suggested to link it using the lookup function. This worked brilliantly. However, now I am designing a GUI with forms but the forms have combo boxes where the lookup function was used and when i change these to text boxes, the players names are replaced with their ID numbers.
Is there any way of creating the form without the unsightly combo boxes, as they won't be needed, the GUI will be read-only. I look forward to your help!!
I have a table that has client names and addresses. I have designed a form to be able to invoice these clients and everything is fine however what I'd like to do is have the address of the client appear automatically.
I have set the client names in a combo box and would like their address to appear in either a text box or sunken label automatically from the table. Is this possible and how do I do it.
Please keep in mind that I've done basic programming so please be kind to this newbie :D
